Good day.
Please help me.
Or tell me about how and where can I get consultation for the problem.
I have small problem with my SCSI driver SYM53C896 on Linux system - kernel
2.2.17.
When I copy huge file (about 1Gb, but < 1.5Gb) from one disk drive to other
is error occured. Perfomance SYM53C896 is very slowly (from 20Mb/s to
4Mb/s), but the connect is being. The system log message and '/proc'
information is attache to this mail.
sorry for my english.
with best regards
Vladimir Parkhomenko
13.12.y2
Hello:
I just got working an ASUS Dual Pentium Motherboard with a dual channel
SCSI controller managed
by this driver.
Additional information required:
a) kind of SCSI interfce used: SCSI-II, SCSI-III (LVD) ?
b) Make sure you do not have hardware troubles like having a 80MBs drive
on the same
channel as a 40 Mbs.
c) sym53c896 driver version ? When using SCSI-III LVD with 80MBs or
higher I recommend to use 1.6b
Wait for that information
Cpaciba
>>>>>>>>>>>>>>>>>> Message d'origine <<<<<<<<<<<<<<<<<<
Le 12/13/00, ? 1:41:08 PM h, "Vladimir Parkhomenko"
<[email protected]> vous a ?crit sur le sujet suivant PROBLEM:
SCSI SYM53C896 driver, kernel 2.2.17:
> Good day.
> Please help me.
> Or tell me about how and where can I get consultation for the problem.
> I have small problem with my SCSI driver SYM53C896 on Linux system -
kernel
> 2.2.17.
> When I copy huge file (about 1Gb, but < 1.5Gb) from one disk drive to
other
> is error occured. Perfomance SYM53C896 is very slowly (from 20Mb/s to
> 4Mb/s), but the connect is being. The system log message and '/proc'
> information is attache to this mail.
> sorry for my english.
> with best regards
> Vladimir Parkhomenko
> 13.12.y2