1 Use USB_INTERFACE_INFO to do device matching, other than USB_DEVICE_INFO.
2 And we try to find the first interface containing the interrupt endpoint.
Signed-off-by: Costa Yao <[email protected]>
---
drivers/bluetooth/btusb.c | 16 +++++++++++-----
1 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 9db2476..80d7e2d 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -58,7 +58,7 @@ static struct usb_driver btusb_driver;
static struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
- { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
+ { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
/* Broadcom SoftSailing reporting vendor specific */
{ USB_DEVICE(0x05ac, 0x21e1) },
@@ -915,9 +915,14 @@ static int btusb_probe(struct usb_interface *intf,
BT_DBG("intf %p id %p", intf, id);
- /* interface numbers are hardcoded in the spec */
- if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
+ for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+ ep_desc = &intf->cur_altsetting->endpoint[i].desc;
+
+ if (usb_endpoint_is_int_in(ep_desc))
+ break;
+
return -ENODEV;
+ }
if (!id->driver_info) {
const struct usb_device_id *match;
@@ -1014,8 +1019,9 @@ static int btusb_probe(struct usb_interface *intf,
hdev->owner = THIS_MODULE;
- /* Interface numbers are hardcoded in the specification */
- data->isoc = usb_ifnum_to_if(data->udev, 1);
+
+ data->isoc = usb_ifnum_to_if(data->udev,
+ 1+intf->cur_altsetting->desc.bInterfaceNumber);
if (!reset)
set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
--
1.7.4.1