Hi, I'm using the bluez implementation for a prototype I developed for my thesis. Therefor I would need to know how the link quality is calculated (or at least its unit) when calling "hcitool lq <bdaddr>". I looked into the hcitools bluez provides but only got as far as hci_read_link_quality. Probably someone can give me some infos on the calculations or a direction where to look at.
Thanks for your help
Regards
Guido
Hi Guido,
> I'm using the bluez implementation for a prototype I developed for my thesis. Therefor I would need to know how the link quality is calculated (or at least its unit) when calling "hcitool lq <bdaddr>". I looked into the hcitools bluez provides but only got as far as hci_read_link_quality. Probably someone can give me some infos on the calculations or a direction where to look at.
if you read the Bluetooth specification, then you see that this is
vendor specific. It depends on the chip manufacturer.
Regards
Marcel