Running on Debian Wheezy (3.2.0-1-amd64), my new Asus bluetooth
dongle didn't work. Made sure and get the correct firmware, but
the driver does not load it correctly.
[ 8.364186] Bluetooth: Can't change to loading configuration err
[ 8.364263] ath3k: probe of 2-4.3:1.0 failed with error -110
[ 8.364300] usbcore: registered new interface driver ath3k
This is from a cold (power off) boot, but it happens repeatedly.
Any idea what could be wrong?
lsusb
Bus 002 Device 005: ID 0cf3:3000 Atheros Communications, Inc. AR3011 Bluetooth (no firmware)
On Fri, 17 Feb 2012 11:20:35 -0800
"Luis R. Rodriguez" <[email protected]> wrote:
> They have been poked (its not me but I poked some internal folks). In the
> meantime, stephen do you have the latest firmware? For what its worth the
> documentation to this driver is at:
>
> http://wireless.kernel.org/en/users/Drivers/ath3k
Yes. Do have latest firmware. It looks like there is some USB
or kernel issue.
On Fri, Feb 17, 2012 at 05:04:57PM +0100, Marcel Holtmann wrote:
> Hi Stephen,
>
> > > > Running on Debian Wheezy (3.2.0-1-amd64), my new Asus bluetooth
> > > > dongle didn't work. Made sure and get the correct firmware, but
> > > > the driver does not load it correctly.
> > > >
> > > > [ 8.364186] Bluetooth: Can't change to loading configuration err
> > > > [ 8.364263] ath3k: probe of 2-4.3:1.0 failed with error -110
> > > > [ 8.364300] usbcore: registered new interface driver ath3k
> > > >
> > > >
> > > > This is from a cold (power off) boot, but it happens repeatedly.
> > > >
> > > > Any idea what could be wrong?
> > > >
> > > > lsusb
> > > > Bus 002 Device 005: ID 0cf3:3000 Atheros Communications, Inc. AR3011 Bluetooth (no firmware)
> > >
> > > you need to ask Atheros for details, but maybe just the firmware file is
> > > missing.
> >
> > Already covered that.
> >
> > It is failing here where it sends the firmware.
> >
> > memcpy(send_buf, firmware->data, 20);
> > if ((err = usb_control_msg(udev, pipe,
> > USB_REQ_DFU_DNLOAD,
> > USB_TYPE_VENDOR, 0, 0,
> > send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
> > BT_ERR("Can't change to loading configuration err");
> > goto error;
> > }
> >
>
> then you need to track down the Atheros guys. Not my driver or
> hardware ;)
They have been poked (its not me but I poked some internal folks). In the
meantime, stephen do you have the latest firmware? For what its worth the
documentation to this driver is at:
http://wireless.kernel.org/en/users/Drivers/ath3k
Luis
Hi Stephen,
> > > Running on Debian Wheezy (3.2.0-1-amd64), my new Asus bluetooth
> > > dongle didn't work. Made sure and get the correct firmware, but
> > > the driver does not load it correctly.
> > >
> > > [ 8.364186] Bluetooth: Can't change to loading configuration err
> > > [ 8.364263] ath3k: probe of 2-4.3:1.0 failed with error -110
> > > [ 8.364300] usbcore: registered new interface driver ath3k
> > >
> > >
> > > This is from a cold (power off) boot, but it happens repeatedly.
> > >
> > > Any idea what could be wrong?
> > >
> > > lsusb
> > > Bus 002 Device 005: ID 0cf3:3000 Atheros Communications, Inc. AR3011 Bluetooth (no firmware)
> >
> > you need to ask Atheros for details, but maybe just the firmware file is
> > missing.
>
> Already covered that.
>
> It is failing here where it sends the firmware.
>
> memcpy(send_buf, firmware->data, 20);
> if ((err = usb_control_msg(udev, pipe,
> USB_REQ_DFU_DNLOAD,
> USB_TYPE_VENDOR, 0, 0,
> send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
> BT_ERR("Can't change to loading configuration err");
> goto error;
> }
>
then you need to track down the Atheros guys. Not my driver or
hardware ;)
Regards
Marcel
On Fri, 17 Feb 2012 09:34:43 +0100
Marcel Holtmann <[email protected]> wrote:
> Hi Stephen,
>
> > Running on Debian Wheezy (3.2.0-1-amd64), my new Asus bluetooth
> > dongle didn't work. Made sure and get the correct firmware, but
> > the driver does not load it correctly.
> >
> > [ 8.364186] Bluetooth: Can't change to loading configuration err
> > [ 8.364263] ath3k: probe of 2-4.3:1.0 failed with error -110
> > [ 8.364300] usbcore: registered new interface driver ath3k
> >
> >
> > This is from a cold (power off) boot, but it happens repeatedly.
> >
> > Any idea what could be wrong?
> >
> > lsusb
> > Bus 002 Device 005: ID 0cf3:3000 Atheros Communications, Inc. AR3011 Bluetooth (no firmware)
>
> you need to ask Atheros for details, but maybe just the firmware file is
> missing.
Already covered that.
It is failing here where it sends the firmware.
memcpy(send_buf, firmware->data, 20);
if ((err = usb_control_msg(udev, pipe,
USB_REQ_DFU_DNLOAD,
USB_TYPE_VENDOR, 0, 0,
send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
BT_ERR("Can't change to loading configuration err");
goto error;
}
Hi Stephen,
> Running on Debian Wheezy (3.2.0-1-amd64), my new Asus bluetooth
> dongle didn't work. Made sure and get the correct firmware, but
> the driver does not load it correctly.
>
> [ 8.364186] Bluetooth: Can't change to loading configuration err
> [ 8.364263] ath3k: probe of 2-4.3:1.0 failed with error -110
> [ 8.364300] usbcore: registered new interface driver ath3k
>
>
> This is from a cold (power off) boot, but it happens repeatedly.
>
> Any idea what could be wrong?
>
> lsusb
> Bus 002 Device 005: ID 0cf3:3000 Atheros Communications, Inc. AR3011 Bluetooth (no firmware)
you need to ask Atheros for details, but maybe just the firmware file is
missing.
Regards
Marcel