From: Chen Ganir <[email protected]>
Translate Characteristic UUID's to name. This list was taken from
the Bluetooth SIG developer site.
---
attrib/client.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 75 insertions(+), 2 deletions(-)
diff --git a/attrib/client.c b/attrib/client.c
index bb6adf8..fc6a717 100644
--- a/attrib/client.c
+++ b/attrib/client.c
@@ -105,8 +105,79 @@ struct watcher {
struct gatt_service *gatt;
};
+struct CharacteristicNames {
+ char uuid[MAX_LEN_UUID_STR + 1];
+ char name[50];
+};
+
+static struct CharacteristicNames charNames[] = {
+ {"00002a43-0000-1000-8000-00805f9b34fb","Alert Category ID" },
+ {"00002a42-0000-1000-8000-00805f9b34fb","Alert Category ID Bit Mask" },
+ {"00002a06-0000-1000-8000-00805f9b34fb","Alert Level" },
+ {"00002a44-0000-1000-8000-00805f9b34fb","Alert Notification Control Point" },
+ {"00002a3f-0000-1000-8000-00805f9b34fb","Alert Status" },
+ {"00002a01-0000-1000-8000-00805f9b34fb","Appearance" },
+ {"00002a49-0000-1000-8000-00805f9b34fb","Blood Pressure Feature" },
+ {"00002a35-0000-1000-8000-00805f9b34fb","Blood Pressure Measurement" },
+ {"00002a38-0000-1000-8000-00805f9b34fb","Body Sensor Location" },
+ {"00002a2b-0000-1000-8000-00805f9b34fb","Current Time" },
+ {"00002a08-0000-1000-8000-00805f9b34fb","Date Time" },
+ {"00002a0a-0000-1000-8000-00805f9b34fb","Day Date Time" },
+ {"00002a09-0000-1000-8000-00805f9b34fb","Day of Week" },
+ {"00002a00-0000-1000-8000-00805f9b34fb","Device Name" },
+ {"00002a0d-0000-1000-8000-00805f9b34fb","DST Offset" },
+ {"00002a0c-0000-1000-8000-00805f9b34fb","Exact Time 256" },
+ {"00002a26-0000-1000-8000-00805f9b34fb","Firmware Revision String" },
+ {"00002a27-0000-1000-8000-00805f9b34fb","Hardware Revision String" },
+ {"00002a39-0000-1000-8000-00805f9b34fb","Heart Rate Control Point" },
+ {"00002a37-0000-1000-8000-00805f9b34fb","Heart Rate Measurement" },
+ {"00002a2a-0000-1000-8000-00805f9b34fb","IEEE 11073-20601 Regulatory" },
+ {"00002a36-0000-1000-8000-00805f9b34fb","Intermediate Cuff Pressure" },
+ {"00002a1e-0000-1000-8000-00805f9b34fb","Intermediate Temperature" },
+ {"00002a0f-0000-1000-8000-00805f9b34fb","Local Time Information" },
+ {"00002a29-0000-1000-8000-00805f9b34fb","Manufacturer Name String" },
+ {"00002a21-0000-1000-8000-00805f9b34fb","Measurement Interval" },
+ {"00002a24-0000-1000-8000-00805f9b34fb","Model Number String" },
+ {"00002a46-0000-1000-8000-00805f9b34fb","New Alert" },
+ {"00002a04-0000-1000-8000-00805f9b34fb","Peripheral Preferred Connection Parameters" },
+ {"00002a02-0000-1000-8000-00805f9b34fb","Peripheral Privacy Flag" },
+ {"00002a03-0000-1000-8000-00805f9b34fb","Reconnection Address" },
+ {"00002a14-0000-1000-8000-00805f9b34fb","Reference Time Information" },
+ {"00002a40-0000-1000-8000-00805f9b34fb","Ringer Control Point" },
+ {"00002a41-0000-1000-8000-00805f9b34fb","Ringer Setting" },
+ {"00002a25-0000-1000-8000-00805f9b34fb","Serial Number String" },
+ {"00002a05-0000-1000-8000-00805f9b34fb","Service Changed" },
+ {"00002a28-0000-1000-8000-00805f9b34fb","Software Revision String" },
+ {"00002a47-0000-1000-8000-00805f9b34fb","Supported New Alert Category" },
+ {"00002a48-0000-1000-8000-00805f9b34fb","Supported Unread Alert Category" },
+ {"00002a23-0000-1000-8000-00805f9b34fb","System ID" },
+ {"00002a1c-0000-1000-8000-00805f9b34fb","Temperature Measurement" },
+ {"00002a1d-0000-1000-8000-00805f9b34fb","Temperature Type" },
+ {"00002a12-0000-1000-8000-00805f9b34fb","Time Accuracy" },
+ {"00002a13-0000-1000-8000-00805f9b34fb","Time Source" },
+ {"00002a16-0000-1000-8000-00805f9b34fb","Time Update Control Point" },
+ {"00002a17-0000-1000-8000-00805f9b34fb","Time Update State" },
+ {"00002a11-0000-1000-8000-00805f9b34fb","Time with DST" },
+ {"00002a0e-0000-1000-8000-00805f9b34fb","Time Zone" },
+ {"00002a07-0000-1000-8000-00805f9b34fb","Tx Power Level" },
+ {"00002a45-0000-1000-8000-00805f9b34fb","Unread Alert Status" },
+};
+
static GSList *gatt_services = NULL;
+static const char* get_char_name(const char* uuid)
+{
+ uint8_t i = 0;
+ uint8_t count = sizeof(charNames) / sizeof(struct CharacteristicNames);
+
+ for (i = 0; i < count; i++) {
+ if(g_strcmp0(charNames[i].uuid, uuid) == 0) {
+ return charNames[i].name;
+ }
+ }
+ return NULL;
+}
+
static void characteristic_free(void *user_data)
{
struct characteristic *chr = user_data;
@@ -202,8 +273,10 @@ static void append_char_dict(DBusMessageIter *iter, struct characteristic *chr)
dict_append_entry(&dict, "UUID", DBUS_TYPE_STRING, &uuid);
g_free(uuid);
- /* FIXME: Translate UUID to name. */
- dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
+ name = get_char_name(chr->type);
+
+ if (name != NULL)
+ dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
if (chr->desc)
dict_append_entry(&dict, "Description", DBUS_TYPE_STRING,
--
1.7.9.5
Szymon,
On 08/29/2012 01:09 PM, Szymon Janc wrote:
> On Wednesday 29 of August 2012 12:06:31 [email protected] wrote:
>> From: Chen Ganir <[email protected]>
>
> Hi Chen,
>
>
>> +struct CharacteristicNames {
>> + char uuid[MAX_LEN_UUID_STR + 1];
>> + char name[50];
>> +};
>
> I would make it
> struct CharacteristicNames {
> const char *uuid;
> const char *name;
> };
>
Ok.
>> +
>> +static struct CharacteristicNames charNames[] = {
>
> constify charNames[]
>
>> + {"00002a43-0000-1000-8000-00805f9b34fb","Alert Category ID" },
>> + {"00002a42-0000-1000-8000-00805f9b34fb","Alert Category ID Bit Mask" },
>> + {"00002a06-0000-1000-8000-00805f9b34fb","Alert Level" },
>> + {"00002a44-0000-1000-8000-00805f9b34fb","Alert Notification Control Point" },
>> + {"00002a3f-0000-1000-8000-00805f9b34fb","Alert Status" },
>> + {"00002a01-0000-1000-8000-00805f9b34fb","Appearance" },
>> + {"00002a49-0000-1000-8000-00805f9b34fb","Blood Pressure Feature" },
>> + {"00002a35-0000-1000-8000-00805f9b34fb","Blood Pressure Measurement" },
>> + {"00002a38-0000-1000-8000-00805f9b34fb","Body Sensor Location" },
>> + {"00002a2b-0000-1000-8000-00805f9b34fb","Current Time" },
>> + {"00002a08-0000-1000-8000-00805f9b34fb","Date Time" },
>> + {"00002a0a-0000-1000-8000-00805f9b34fb","Day Date Time" },
>> + {"00002a09-0000-1000-8000-00805f9b34fb","Day of Week" },
>> + {"00002a00-0000-1000-8000-00805f9b34fb","Device Name" },
>> + {"00002a0d-0000-1000-8000-00805f9b34fb","DST Offset" },
>> + {"00002a0c-0000-1000-8000-00805f9b34fb","Exact Time 256" },
>> + {"00002a26-0000-1000-8000-00805f9b34fb","Firmware Revision String" },
>> + {"00002a27-0000-1000-8000-00805f9b34fb","Hardware Revision String" },
>> + {"00002a39-0000-1000-8000-00805f9b34fb","Heart Rate Control Point" },
>> + {"00002a37-0000-1000-8000-00805f9b34fb","Heart Rate Measurement" },
>> + {"00002a2a-0000-1000-8000-00805f9b34fb","IEEE 11073-20601 Regulatory" },
>> + {"00002a36-0000-1000-8000-00805f9b34fb","Intermediate Cuff Pressure" },
>> + {"00002a1e-0000-1000-8000-00805f9b34fb","Intermediate Temperature" },
>> + {"00002a0f-0000-1000-8000-00805f9b34fb","Local Time Information" },
>> + {"00002a29-0000-1000-8000-00805f9b34fb","Manufacturer Name String" },
>> + {"00002a21-0000-1000-8000-00805f9b34fb","Measurement Interval" },
>> + {"00002a24-0000-1000-8000-00805f9b34fb","Model Number String" },
>> + {"00002a46-0000-1000-8000-00805f9b34fb","New Alert" },
>> + {"00002a04-0000-1000-8000-00805f9b34fb","Peripheral Preferred Connection Parameters" },
>> + {"00002a02-0000-1000-8000-00805f9b34fb","Peripheral Privacy Flag" },
>> + {"00002a03-0000-1000-8000-00805f9b34fb","Reconnection Address" },
>> + {"00002a14-0000-1000-8000-00805f9b34fb","Reference Time Information" },
>> + {"00002a40-0000-1000-8000-00805f9b34fb","Ringer Control Point" },
>> + {"00002a41-0000-1000-8000-00805f9b34fb","Ringer Setting" },
>> + {"00002a25-0000-1000-8000-00805f9b34fb","Serial Number String" },
>> + {"00002a05-0000-1000-8000-00805f9b34fb","Service Changed" },
>> + {"00002a28-0000-1000-8000-00805f9b34fb","Software Revision String" },
>> + {"00002a47-0000-1000-8000-00805f9b34fb","Supported New Alert Category" },
>> + {"00002a48-0000-1000-8000-00805f9b34fb","Supported Unread Alert Category" },
>> + {"00002a23-0000-1000-8000-00805f9b34fb","System ID" },
>> + {"00002a1c-0000-1000-8000-00805f9b34fb","Temperature Measurement" },
>> + {"00002a1d-0000-1000-8000-00805f9b34fb","Temperature Type" },
>> + {"00002a12-0000-1000-8000-00805f9b34fb","Time Accuracy" },
>> + {"00002a13-0000-1000-8000-00805f9b34fb","Time Source" },
>> + {"00002a16-0000-1000-8000-00805f9b34fb","Time Update Control Point" },
>> + {"00002a17-0000-1000-8000-00805f9b34fb","Time Update State" },
>> + {"00002a11-0000-1000-8000-00805f9b34fb","Time with DST" },
>> + {"00002a0e-0000-1000-8000-00805f9b34fb","Time Zone" },
>> + {"00002a07-0000-1000-8000-00805f9b34fb","Tx Power Level" },
>> + {"00002a45-0000-1000-8000-00805f9b34fb","Unread Alert Status" },
>> +};
>> +
>
> I would add { } at the end...
Ok.
>
>> static GSList *gatt_services = NULL;
>>
>> +static const char* get_char_name(const char* uuid)
>
> this should be static const char *get_char_name(const char *uuid)
>
Ok.
>> +{
>> + uint8_t i = 0;
>> + uint8_t count = sizeof(charNames) / sizeof(struct CharacteristicNames);
>> +
>> + for (i = 0; i < count; i++) {
>> + if(g_strcmp0(charNames[i].uuid, uuid) == 0) {
>> + return charNames[i].name;
>> + }
>> + }
>
> ... and change this loop into to:
>
> const struct CharacteristicNames *c;
>
> for (c = charNames; c->uuid; c++) {
> ...
> }
>
Ok.
> This will keep convention used.
>
>> + return NULL;
>> +}
>> +
>> static void characteristic_free(void *user_data)
>> {
>> struct characteristic *chr = user_data;
>> @@ -202,8 +273,10 @@ static void append_char_dict(DBusMessageIter *iter, struct characteristic *chr)
>> dict_append_entry(&dict, "UUID", DBUS_TYPE_STRING, &uuid);
>> g_free(uuid);
>>
>> - /* FIXME: Translate UUID to name. */
>> - dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
>> + name = get_char_name(chr->type);
>> +
>> + if (name != NULL)
>> + dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
>
> With that there is no need to initialize name to "" so this could be also
> part of a patch.
>
> If get_char_name() returned empty string instead of NULL if matching uuid is
> not found we could append empty string as Name (as it is now), but not sure
> what is better - append empty name or not append.
>
I will remove the initialization of name. I believe not appending an
empty string is much more suitable than sending a property with an empty
string.
>>
>> if (chr->desc)
>> dict_append_entry(&dict, "Description", DBUS_TYPE_STRING,
>>
>
BR,
Chen Ganir
On Wednesday 29 of August 2012 12:06:31 [email protected] wrote:
> From: Chen Ganir <[email protected]>
Hi Chen,
> +struct CharacteristicNames {
> + char uuid[MAX_LEN_UUID_STR + 1];
> + char name[50];
> +};
I would make it
struct CharacteristicNames {
const char *uuid;
const char *name;
};
> +
> +static struct CharacteristicNames charNames[] = {
constify charNames[]
> + {"00002a43-0000-1000-8000-00805f9b34fb","Alert Category ID" },
> + {"00002a42-0000-1000-8000-00805f9b34fb","Alert Category ID Bit Mask" },
> + {"00002a06-0000-1000-8000-00805f9b34fb","Alert Level" },
> + {"00002a44-0000-1000-8000-00805f9b34fb","Alert Notification Control Point" },
> + {"00002a3f-0000-1000-8000-00805f9b34fb","Alert Status" },
> + {"00002a01-0000-1000-8000-00805f9b34fb","Appearance" },
> + {"00002a49-0000-1000-8000-00805f9b34fb","Blood Pressure Feature" },
> + {"00002a35-0000-1000-8000-00805f9b34fb","Blood Pressure Measurement" },
> + {"00002a38-0000-1000-8000-00805f9b34fb","Body Sensor Location" },
> + {"00002a2b-0000-1000-8000-00805f9b34fb","Current Time" },
> + {"00002a08-0000-1000-8000-00805f9b34fb","Date Time" },
> + {"00002a0a-0000-1000-8000-00805f9b34fb","Day Date Time" },
> + {"00002a09-0000-1000-8000-00805f9b34fb","Day of Week" },
> + {"00002a00-0000-1000-8000-00805f9b34fb","Device Name" },
> + {"00002a0d-0000-1000-8000-00805f9b34fb","DST Offset" },
> + {"00002a0c-0000-1000-8000-00805f9b34fb","Exact Time 256" },
> + {"00002a26-0000-1000-8000-00805f9b34fb","Firmware Revision String" },
> + {"00002a27-0000-1000-8000-00805f9b34fb","Hardware Revision String" },
> + {"00002a39-0000-1000-8000-00805f9b34fb","Heart Rate Control Point" },
> + {"00002a37-0000-1000-8000-00805f9b34fb","Heart Rate Measurement" },
> + {"00002a2a-0000-1000-8000-00805f9b34fb","IEEE 11073-20601 Regulatory" },
> + {"00002a36-0000-1000-8000-00805f9b34fb","Intermediate Cuff Pressure" },
> + {"00002a1e-0000-1000-8000-00805f9b34fb","Intermediate Temperature" },
> + {"00002a0f-0000-1000-8000-00805f9b34fb","Local Time Information" },
> + {"00002a29-0000-1000-8000-00805f9b34fb","Manufacturer Name String" },
> + {"00002a21-0000-1000-8000-00805f9b34fb","Measurement Interval" },
> + {"00002a24-0000-1000-8000-00805f9b34fb","Model Number String" },
> + {"00002a46-0000-1000-8000-00805f9b34fb","New Alert" },
> + {"00002a04-0000-1000-8000-00805f9b34fb","Peripheral Preferred Connection Parameters" },
> + {"00002a02-0000-1000-8000-00805f9b34fb","Peripheral Privacy Flag" },
> + {"00002a03-0000-1000-8000-00805f9b34fb","Reconnection Address" },
> + {"00002a14-0000-1000-8000-00805f9b34fb","Reference Time Information" },
> + {"00002a40-0000-1000-8000-00805f9b34fb","Ringer Control Point" },
> + {"00002a41-0000-1000-8000-00805f9b34fb","Ringer Setting" },
> + {"00002a25-0000-1000-8000-00805f9b34fb","Serial Number String" },
> + {"00002a05-0000-1000-8000-00805f9b34fb","Service Changed" },
> + {"00002a28-0000-1000-8000-00805f9b34fb","Software Revision String" },
> + {"00002a47-0000-1000-8000-00805f9b34fb","Supported New Alert Category" },
> + {"00002a48-0000-1000-8000-00805f9b34fb","Supported Unread Alert Category" },
> + {"00002a23-0000-1000-8000-00805f9b34fb","System ID" },
> + {"00002a1c-0000-1000-8000-00805f9b34fb","Temperature Measurement" },
> + {"00002a1d-0000-1000-8000-00805f9b34fb","Temperature Type" },
> + {"00002a12-0000-1000-8000-00805f9b34fb","Time Accuracy" },
> + {"00002a13-0000-1000-8000-00805f9b34fb","Time Source" },
> + {"00002a16-0000-1000-8000-00805f9b34fb","Time Update Control Point" },
> + {"00002a17-0000-1000-8000-00805f9b34fb","Time Update State" },
> + {"00002a11-0000-1000-8000-00805f9b34fb","Time with DST" },
> + {"00002a0e-0000-1000-8000-00805f9b34fb","Time Zone" },
> + {"00002a07-0000-1000-8000-00805f9b34fb","Tx Power Level" },
> + {"00002a45-0000-1000-8000-00805f9b34fb","Unread Alert Status" },
> +};
> +
I would add { } at the end...
> static GSList *gatt_services = NULL;
>
> +static const char* get_char_name(const char* uuid)
this should be static const char *get_char_name(const char *uuid)
> +{
> + uint8_t i = 0;
> + uint8_t count = sizeof(charNames) / sizeof(struct CharacteristicNames);
> +
> + for (i = 0; i < count; i++) {
> + if(g_strcmp0(charNames[i].uuid, uuid) == 0) {
> + return charNames[i].name;
> + }
> + }
... and change this loop into to:
const struct CharacteristicNames *c;
for (c = charNames; c->uuid; c++) {
...
}
This will keep convention used.
> + return NULL;
> +}
> +
> static void characteristic_free(void *user_data)
> {
> struct characteristic *chr = user_data;
> @@ -202,8 +273,10 @@ static void append_char_dict(DBusMessageIter *iter, struct characteristic *chr)
> dict_append_entry(&dict, "UUID", DBUS_TYPE_STRING, &uuid);
> g_free(uuid);
>
> - /* FIXME: Translate UUID to name. */
> - dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
> + name = get_char_name(chr->type);
> +
> + if (name != NULL)
> + dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
With that there is no need to initialize name to "" so this could be also
part of a patch.
If get_char_name() returned empty string instead of NULL if matching uuid is
not found we could append empty string as Name (as it is now), but not sure
what is better - append empty name or not append.
>
> if (chr->desc)
> dict_append_entry(&dict, "Description", DBUS_TYPE_STRING,
>
--
BR
Szymon Janc