Add support for the AR9462 chip
T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=e003 Rev=00.02
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: AceLan Kao <[email protected]>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 11f467c..ae61b35 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -91,6 +91,7 @@ static struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0489, 0xe04e) },
{ USB_DEVICE(0x0489, 0xe056) },
{ USB_DEVICE(0x0489, 0xe04d) },
+ { USB_DEVICE(0x0cf3, 0xe003) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -128,6 +129,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 7a7e5f8..1f63170 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -151,6 +151,7 @@ static struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
--
1.8.1.2
Hi AceLan,
* AceLan Kao <[email protected]> [2013-06-20 13:38:45 +0800]:
> Add support for the AR9462 chip
>
> T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0cf3 ProdID=e003 Rev=00.02
> C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>
> Signed-off-by: AceLan Kao <[email protected]>
> ---
> drivers/bluetooth/ath3k.c | 2 ++
> drivers/bluetooth/btusb.c | 1 +
> 2 files changed, 3 insertions(+)
Patch has been applied to bluetooth-next. Thanks.
Gustavo