This patch introduces Get Connection Information command.
---
doc/mgmt-api.txt | 38 ++++++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
index cd5cd24..8ca8457 100644
--- a/doc/mgmt-api.txt
+++ b/doc/mgmt-api.txt
@@ -1679,6 +1679,44 @@ Load Identity Resolving Keys Command
Invalid Index
+Get Connection Information Command
+==================================
+
+ Command Code: 0x0031
+ Controller Index: <controller id>
+ Command Parameters: Address (6 Octets)
+ Address_Type (1 Octet)
+ Data_Type (4 Octet)
+ Return Parameters: Address (6 Octets)
+ Address_Type (1 Octet)
+ RSSI (1 Octet)
+ Flags (4 Octets)
+ EIR_Data_Length (2 Octets)
+ EIR_Data (0-65535 Octets)
+
+ This command is used to get connection information.
+
+ Data_Type parameter is a bitmask with currently the following available
+ bits:
+
+ 0 TX Power
+
+ All the other bits are reserved and shall be set to 0. Unknown bits are
+ ignored.
+
+ All the requested Data_Type information are returned in EIR_Data.
+
+ Flags are reserved for the future use.
+
+ This command generates a Command Complete event on success and
+ on failure.
+
+ Possible errors: Not Connected
+ Not Powered
+ Invalid Parameters
+ Invalid Index
+
+
Command Complete Event
======================
--
1.8.4