The universal/local bit handling was incorrectly done in the code.
So when setting EUI address from BD address we do this:
- If BD address type is PUBLIC, then we clear the universal bit
in EUI address. If the address type is RANDOM, then the universal
bit is set (BT 6lowpan draft chapter 3.2.2)
- After this we invert the universal/local bit according to RFC 2464
When figuring out BD address we do the reverse:
- Take EUI address from stateless IPv6 address, invert the
universal/local bit according to RFC 2464
- If universal bit is 1 in this modified EUI address, then address
type is set to RANDOM, otherwise it is PUBLIC
Note that 6lowpan_iphc.[ch] does the final toggling of U/L bit
before sending or receiving the network packet.
Signed-off-by: Jukka Rissanen <[email protected]>
---
net/bluetooth/6lowpan.c | 65 ++++++++++++++++++++++++++-----------------------
1 file changed, 35 insertions(+), 30 deletions(-)
diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index adb3ea0..d906016 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -420,12 +420,18 @@ static int conn_send(struct l2cap_conn *conn,
return 0;
}
-static void get_dest_bdaddr(struct in6_addr *ip6_daddr,
- bdaddr_t *addr, u8 *addr_type)
+static u8 get_addr_type_from_eui64(u8 byte)
{
- u8 *eui64;
+ /* Is universal(0) or local(1) bit, */
+ if (byte & 0x02)
+ return ADDR_LE_DEV_RANDOM;
- eui64 = ip6_daddr->s6_addr + 8;
+ return ADDR_LE_DEV_PUBLIC;
+}
+
+static void copy_to_bdaddr(struct in6_addr *ip6_daddr, bdaddr_t *addr)
+{
+ u8 *eui64 = ip6_daddr->s6_addr + 8;
addr->b[0] = eui64[7];
addr->b[1] = eui64[6];
@@ -433,16 +439,19 @@ static void get_dest_bdaddr(struct in6_addr *ip6_daddr,
addr->b[3] = eui64[2];
addr->b[4] = eui64[1];
addr->b[5] = eui64[0];
+}
- addr->b[5] ^= 2;
+static void convert_dest_bdaddr(struct in6_addr *ip6_daddr,
+ bdaddr_t *addr, u8 *addr_type)
+{
+ copy_to_bdaddr(ip6_daddr, addr);
- /* Set universal/local bit to 0 */
- if (addr->b[5] & 1) {
- addr->b[5] &= ~1;
- *addr_type = ADDR_LE_DEV_PUBLIC;
- } else {
- *addr_type = ADDR_LE_DEV_RANDOM;
- }
+ /* We need to toggle the U/L bit that we got from IPv6 address
+ * so that we get the proper address and type of the BD address.
+ */
+ addr->b[5] ^= 0x02;
+
+ *addr_type = get_addr_type_from_eui64(addr->b[5]);
}
static int header_create(struct sk_buff *skb, struct net_device *netdev,
@@ -473,9 +482,11 @@ static int header_create(struct sk_buff *skb, struct net_device *netdev,
/* Get destination BT device from skb.
* If there is no such peer then discard the packet.
*/
- get_dest_bdaddr(&hdr->daddr, &addr, &addr_type);
+ convert_dest_bdaddr(&hdr->daddr, &addr, &addr_type);
- BT_DBG("dest addr %pMR type %d", &addr, addr_type);
+ BT_DBG("dest addr %pMR type %s IP %pI6c", &addr,
+ addr_type == ADDR_LE_DEV_PUBLIC ? "PUBLIC" : "RANDOM",
+ &hdr->daddr);
read_lock_irqsave(&devices_lock, flags);
peer = peer_lookup_ba(dev, &addr, addr_type);
@@ -556,7 +567,7 @@ static netdev_tx_t bt_xmit(struct sk_buff *skb, struct net_device *netdev)
} else {
unsigned long flags;
- get_dest_bdaddr(&lowpan_cb(skb)->addr, &addr, &addr_type);
+ convert_dest_bdaddr(&lowpan_cb(skb)->addr, &addr, &addr_type);
eui64_addr = lowpan_cb(skb)->addr.s6_addr + 8;
dev = lowpan_dev(netdev);
@@ -564,8 +575,10 @@ static netdev_tx_t bt_xmit(struct sk_buff *skb, struct net_device *netdev)
peer = peer_lookup_ba(dev, &addr, addr_type);
read_unlock_irqrestore(&devices_lock, flags);
- BT_DBG("xmit from %s to %pMR (%pI6c) peer %p", netdev->name,
- &addr, &lowpan_cb(skb)->addr, peer);
+ BT_DBG("xmit %s to %pMR type %s IP %pI6c peer %p",
+ netdev->name, &addr,
+ addr_type == ADDR_LE_DEV_PUBLIC ? "PUBLIC" : "RANDOM",
+ &lowpan_cb(skb)->addr, peer);
if (peer && peer->conn)
err = send_pkt(peer->conn, netdev->dev_addr,
@@ -620,13 +633,13 @@ static void set_addr(u8 *eui, u8 *addr, u8 addr_type)
eui[6] = addr[1];
eui[7] = addr[0];
- eui[0] ^= 2;
-
- /* Universal/local bit set, RFC 4291 */
+ /* Universal/local bit set, BT 6lowpan draft ch. 3.2.1 */
if (addr_type == ADDR_LE_DEV_PUBLIC)
- eui[0] |= 1;
+ eui[0] &= ~0x02;
else
- eui[0] &= ~1;
+ eui[0] |= 0x02;
+
+ BT_DBG("type %d addr %*phC", addr_type, 8, eui);
}
static void set_dev_addr(struct net_device *netdev, bdaddr_t *addr,
@@ -634,7 +647,6 @@ static void set_dev_addr(struct net_device *netdev, bdaddr_t *addr,
{
netdev->addr_assign_type = NET_ADDR_PERM;
set_addr(netdev->dev_addr, addr->b, addr_type);
- netdev->dev_addr[0] ^= 2;
}
static void ifup(struct net_device *netdev)
@@ -684,13 +696,6 @@ static int add_peer_conn(struct l2cap_conn *conn, struct lowpan_dev *dev)
memcpy(&peer->eui64_addr, (u8 *)&peer->peer_addr.s6_addr + 8,
EUI64_ADDR_LEN);
- peer->eui64_addr[0] ^= 2; /* second bit-flip (Universe/Local)
- * is done according RFC2464
- */
-
- raw_dump_inline(__func__, "peer IPv6 address",
- (unsigned char *)&peer->peer_addr, 16);
- raw_dump_inline(__func__, "peer EUI64 address", peer->eui64_addr, 8);
write_lock_irqsave(&devices_lock, flags);
INIT_LIST_HEAD(&peer->list);
--
1.8.3.1
Hi Jukka,
> The universal/local bit handling was incorrectly done in the code.
>
> So when setting EUI address from BD address we do this:
> - If BD address type is PUBLIC, then we clear the universal bit
> in EUI address. If the address type is RANDOM, then the universal
> bit is set (BT 6lowpan draft chapter 3.2.2)
> - After this we invert the universal/local bit according to RFC 2464
>
> When figuring out BD address we do the reverse:
> - Take EUI address from stateless IPv6 address, invert the
> universal/local bit according to RFC 2464
> - If universal bit is 1 in this modified EUI address, then address
> type is set to RANDOM, otherwise it is PUBLIC
>
> Note that 6lowpan_iphc.[ch] does the final toggling of U/L bit
> before sending or receiving the network packet.
>
> Signed-off-by: Jukka Rissanen <[email protected]>
> ---
> net/bluetooth/6lowpan.c | 65 ++++++++++++++++++++++++++-----------------------
> 1 file changed, 35 insertions(+), 30 deletions(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel