2015-01-28 20:30:27

by Adam Lee

[permalink] [raw]
Subject: [PATCH v2] Bluetooth: ath3k: workaround the compatibility issue with xHCI controller

BugLink: https://bugs.launchpad.net/bugs/1400215

ath3k devices fail to load firmwares on xHCI buses, but work well on
EHCI, this might be a compatibility issue between xHCI and ath3k chips.
As my testing result, those chips will work on xHCI buses again with
this patch.

This workaround is from Qualcomm, they also did some workarounds in
Windows driver.

Signed-off-by: Adam Lee <[email protected]>
---
drivers/bluetooth/ath3k.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 1ee27ac..f568d3d 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -174,6 +174,8 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
#define USB_REQ_DFU_DNLOAD 1
#define BULK_SIZE 4096
#define FW_HDR_SIZE 20
+#define TIMEGAP_USEC_MIN 50
+#define TIMEGAP_USEC_MAX 100

static int ath3k_load_firmware(struct usb_device *udev,
const struct firmware *firmware)
@@ -205,6 +207,9 @@ static int ath3k_load_firmware(struct usb_device *udev,
pipe = usb_sndbulkpipe(udev, 0x02);

while (count) {
+ /* workaround the compatibility issue with xHCI controller*/
+ usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
+
size = min_t(uint, count, BULK_SIZE);
memcpy(send_buf, firmware->data + sent, size);

@@ -302,6 +307,9 @@ static int ath3k_load_fwfile(struct usb_device *udev,
pipe = usb_sndbulkpipe(udev, 0x02);

while (count) {
+ /* workaround the compatibility issue with xHCI controller*/
+ usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
+
size = min_t(uint, count, BULK_SIZE);
memcpy(send_buf, firmware->data + sent, size);

--
2.1.4


2015-01-29 18:14:37

by Marcel Holtmann

[permalink] [raw]
Subject: Re: [PATCH v2] Bluetooth: ath3k: workaround the compatibility issue with xHCI controller

Hi Adam,

> BugLink: https://bugs.launchpad.net/bugs/1400215
>
> ath3k devices fail to load firmwares on xHCI buses, but work well on
> EHCI, this might be a compatibility issue between xHCI and ath3k chips.
> As my testing result, those chips will work on xHCI buses again with
> this patch.
>
> This workaround is from Qualcomm, they also did some workarounds in
> Windows driver.
>
> Signed-off-by: Adam Lee <[email protected]>
> ---
> drivers/bluetooth/ath3k.c | 8 ++++++++
> 1 file changed, 8 insertions(+)

patch has been applied to bluetooth-next tree.

Regards

Marcel