HCI_UART_PROTO_SET flag is set before hci_uart_set_proto call. If we
receive data from tty layer during this procedure, proto pointer may
not be assigned yet, leading to null pointer dereference in rx method
hci_uart_tty_receive.
This patch fixes this issue by introducing HCI_UART_PROTO_READY flag in
order to avoid any proto operation before proto opening and assignment.
Signed-off-by: Loic Poulain <[email protected]>
---
v2: Use PROTO_READY instead of overloading PROTO_SET ioctl.
drivers/bluetooth/hci_ldisc.c | 11 +++++++----
drivers/bluetooth/hci_uart.h | 1 +
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index c00168a..49b3e1e 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -227,7 +227,7 @@ static int hci_uart_flush(struct hci_dev *hdev)
tty_ldisc_flush(tty);
tty_driver_flush_buffer(tty);
- if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
hu->proto->flush(hu);
return 0;
@@ -492,7 +492,7 @@ static void hci_uart_tty_close(struct tty_struct *tty)
cancel_work_sync(&hu->write_work);
- if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
+ if (test_and_clear_bit(HCI_UART_PROTO_READY, &hu->flags)) {
if (hdev) {
if (test_bit(HCI_UART_REGISTERED, &hu->flags))
hci_unregister_dev(hdev);
@@ -500,6 +500,7 @@ static void hci_uart_tty_close(struct tty_struct *tty)
}
hu->proto->close(hu);
}
+ clear_bit(HCI_UART_PROTO_SET, &hu->flags);
kfree(hu);
}
@@ -526,7 +527,7 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty)
if (tty != hu->tty)
return;
- if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
hci_uart_tx_wakeup(hu);
}
@@ -550,7 +551,7 @@ static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
if (!hu || tty != hu->tty)
return;
- if (!test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
return;
/* It does not need a lock here as it is already protected by a mutex in
@@ -638,9 +639,11 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id)
return err;
hu->proto = p;
+ set_bit(HCI_UART_PROTO_READY, &hu->flags);
err = hci_uart_register_dev(hu);
if (err) {
+ clear_bit(HCI_UART_PROTO_READY, &hu->flags);
p->close(hu);
return err;
}
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 4814ff0..839bad1 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -95,6 +95,7 @@ struct hci_uart {
/* HCI_UART proto flag bits */
#define HCI_UART_PROTO_SET 0
#define HCI_UART_REGISTERED 1
+#define HCI_UART_PROTO_READY 2
/* TX states */
#define HCI_UART_SENDING 1
--
1.9.1