From: Chen Ganir <[email protected]>
Translate Characteristic UUID's to name. This list was taken from
the Bluetooth SIG developer site.
---
attrib/client.c | 83 +++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 80 insertions(+), 3 deletions(-)
diff --git a/attrib/client.c b/attrib/client.c
index bb6adf8..4ef74b5 100644
--- a/attrib/client.c
+++ b/attrib/client.c
@@ -105,8 +105,79 @@ struct watcher {
struct gatt_service *gatt;
};
+struct characteristic_info {
+ const char *uuid;
+ const char *name;
+};
+
+static const struct characteristic_info charInfo[] = {
+ {"00002a43-0000-1000-8000-00805f9b34fb","Alert Category ID" },
+ {"00002a42-0000-1000-8000-00805f9b34fb","Alert Category ID Bit Mask" },
+ {"00002a06-0000-1000-8000-00805f9b34fb","Alert Level" },
+ {"00002a44-0000-1000-8000-00805f9b34fb","Alert Notification Control Point" },
+ {"00002a3f-0000-1000-8000-00805f9b34fb","Alert Status" },
+ {"00002a01-0000-1000-8000-00805f9b34fb","Appearance" },
+ {"00002a49-0000-1000-8000-00805f9b34fb","Blood Pressure Feature" },
+ {"00002a35-0000-1000-8000-00805f9b34fb","Blood Pressure Measurement" },
+ {"00002a38-0000-1000-8000-00805f9b34fb","Body Sensor Location" },
+ {"00002a2b-0000-1000-8000-00805f9b34fb","Current Time" },
+ {"00002a08-0000-1000-8000-00805f9b34fb","Date Time" },
+ {"00002a0a-0000-1000-8000-00805f9b34fb","Day Date Time" },
+ {"00002a09-0000-1000-8000-00805f9b34fb","Day of Week" },
+ {"00002a00-0000-1000-8000-00805f9b34fb","Device Name" },
+ {"00002a0d-0000-1000-8000-00805f9b34fb","DST Offset" },
+ {"00002a0c-0000-1000-8000-00805f9b34fb","Exact Time 256" },
+ {"00002a26-0000-1000-8000-00805f9b34fb","Firmware Revision String" },
+ {"00002a27-0000-1000-8000-00805f9b34fb","Hardware Revision String" },
+ {"00002a39-0000-1000-8000-00805f9b34fb","Heart Rate Control Point" },
+ {"00002a37-0000-1000-8000-00805f9b34fb","Heart Rate Measurement" },
+ {"00002a2a-0000-1000-8000-00805f9b34fb","IEEE 11073-20601 Regulatory" },
+ {"00002a36-0000-1000-8000-00805f9b34fb","Intermediate Cuff Pressure" },
+ {"00002a1e-0000-1000-8000-00805f9b34fb","Intermediate Temperature" },
+ {"00002a0f-0000-1000-8000-00805f9b34fb","Local Time Information" },
+ {"00002a29-0000-1000-8000-00805f9b34fb","Manufacturer Name String" },
+ {"00002a21-0000-1000-8000-00805f9b34fb","Measurement Interval" },
+ {"00002a24-0000-1000-8000-00805f9b34fb","Model Number String" },
+ {"00002a46-0000-1000-8000-00805f9b34fb","New Alert" },
+ {"00002a04-0000-1000-8000-00805f9b34fb","Peripheral Preferred Connection Parameters" },
+ {"00002a02-0000-1000-8000-00805f9b34fb","Peripheral Privacy Flag" },
+ {"00002a03-0000-1000-8000-00805f9b34fb","Reconnection Address" },
+ {"00002a14-0000-1000-8000-00805f9b34fb","Reference Time Information" },
+ {"00002a40-0000-1000-8000-00805f9b34fb","Ringer Control Point" },
+ {"00002a41-0000-1000-8000-00805f9b34fb","Ringer Setting" },
+ {"00002a25-0000-1000-8000-00805f9b34fb","Serial Number String" },
+ {"00002a05-0000-1000-8000-00805f9b34fb","Service Changed" },
+ {"00002a28-0000-1000-8000-00805f9b34fb","Software Revision String" },
+ {"00002a47-0000-1000-8000-00805f9b34fb","Supported New Alert Category" },
+ {"00002a48-0000-1000-8000-00805f9b34fb","Supported Unread Alert Category" },
+ {"00002a23-0000-1000-8000-00805f9b34fb","System ID" },
+ {"00002a1c-0000-1000-8000-00805f9b34fb","Temperature Measurement" },
+ {"00002a1d-0000-1000-8000-00805f9b34fb","Temperature Type" },
+ {"00002a12-0000-1000-8000-00805f9b34fb","Time Accuracy" },
+ {"00002a13-0000-1000-8000-00805f9b34fb","Time Source" },
+ {"00002a16-0000-1000-8000-00805f9b34fb","Time Update Control Point" },
+ {"00002a17-0000-1000-8000-00805f9b34fb","Time Update State" },
+ {"00002a11-0000-1000-8000-00805f9b34fb","Time with DST" },
+ {"00002a0e-0000-1000-8000-00805f9b34fb","Time Zone" },
+ {"00002a07-0000-1000-8000-00805f9b34fb","Tx Power Level" },
+ {"00002a45-0000-1000-8000-00805f9b34fb","Unread Alert Status" },
+ { }
+};
+
static GSList *gatt_services = NULL;
+static const struct characteristic_info *get_char_info(const char* uuid)
+{
+ const struct characteristic_info *c;
+
+ for (c = charInfo; c->uuid; c++) {
+ if(g_strcmp0(c->uuid, uuid) == 0) {
+ return c;
+ }
+ }
+ return NULL;
+}
+
static void characteristic_free(void *user_data)
{
struct characteristic *chr = user_data;
@@ -190,7 +261,7 @@ static int watcher_cmp(gconstpointer a, gconstpointer b)
static void append_char_dict(DBusMessageIter *iter, struct characteristic *chr)
{
DBusMessageIter dict;
- const char *name = "";
+ const struct characteristic_info *char_info;
char *uuid;
dbus_message_iter_open_container(iter, DBUS_TYPE_ARRAY,
@@ -202,8 +273,14 @@ static void append_char_dict(DBusMessageIter *iter, struct characteristic *chr)
dict_append_entry(&dict, "UUID", DBUS_TYPE_STRING, &uuid);
g_free(uuid);
- /* FIXME: Translate UUID to name. */
- dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
+ char_info = get_char_info(chr->type);
+
+ if (char_info != NULL) {
+ const char *name = char_info->name;
+ if (name != NULL)
+ dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
+ }
+
if (chr->desc)
dict_append_entry(&dict, "Description", DBUS_TYPE_STRING,
--
1.7.9.5
On Thursday 30 of August 2012 15:38:04 Chen Ganir wrote:
> >> static GSList *gatt_services = NULL;
> >>
> >> +static const struct characteristic_info *get_char_info(const char* uuid)
> >
> > I would leave this function returning name directly and not whole struct characteristic_info.
> >
> Why ? We have this struct with characteristic information (maybe later
> we'll add more information. Why limit ourselves to name only ?
If you plan to add more data into that structure then it is OK to return whole struct.
But if only name is to be used, then I would just call that function get_name() and
return name.
--
BR
Szymon Janc
Szymon,
On 08/30/2012 03:20 PM, Szymon Janc wrote:
> On Wednesday 29 of August 2012 13:56:16 [email protected] wrote:
>> From: Chen Ganir <[email protected]>
>
> Hi Chen,
>
>> Translate Characteristic UUID's to name. This list was taken from
>> the Bluetooth SIG developer site.
>> ---
>> attrib/client.c | 83 +++++++++++++++++++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 80 insertions(+), 3 deletions(-)
>>
>> diff --git a/attrib/client.c b/attrib/client.c
>> index bb6adf8..4ef74b5 100644
>> --- a/attrib/client.c
>> +++ b/attrib/client.c
>> @@ -105,8 +105,79 @@ struct watcher {
>> struct gatt_service *gatt;
>> };
>>
>> +struct characteristic_info {
>> + const char *uuid;
>> + const char *name;
>> +};
>> +
>> +static const struct characteristic_info charInfo[] = {
>> + {"00002a43-0000-1000-8000-00805f9b34fb","Alert Category ID" },
>> + {"00002a42-0000-1000-8000-00805f9b34fb","Alert Category ID Bit Mask" },
>> + {"00002a06-0000-1000-8000-00805f9b34fb","Alert Level" },
>> + {"00002a44-0000-1000-8000-00805f9b34fb","Alert Notification Control Point" },
>> + {"00002a3f-0000-1000-8000-00805f9b34fb","Alert Status" },
>> + {"00002a01-0000-1000-8000-00805f9b34fb","Appearance" },
>> + {"00002a49-0000-1000-8000-00805f9b34fb","Blood Pressure Feature" },
>> + {"00002a35-0000-1000-8000-00805f9b34fb","Blood Pressure Measurement" },
>> + {"00002a38-0000-1000-8000-00805f9b34fb","Body Sensor Location" },
>> + {"00002a2b-0000-1000-8000-00805f9b34fb","Current Time" },
>> + {"00002a08-0000-1000-8000-00805f9b34fb","Date Time" },
>> + {"00002a0a-0000-1000-8000-00805f9b34fb","Day Date Time" },
>> + {"00002a09-0000-1000-8000-00805f9b34fb","Day of Week" },
>> + {"00002a00-0000-1000-8000-00805f9b34fb","Device Name" },
>> + {"00002a0d-0000-1000-8000-00805f9b34fb","DST Offset" },
>> + {"00002a0c-0000-1000-8000-00805f9b34fb","Exact Time 256" },
>> + {"00002a26-0000-1000-8000-00805f9b34fb","Firmware Revision String" },
>> + {"00002a27-0000-1000-8000-00805f9b34fb","Hardware Revision String" },
>> + {"00002a39-0000-1000-8000-00805f9b34fb","Heart Rate Control Point" },
>> + {"00002a37-0000-1000-8000-00805f9b34fb","Heart Rate Measurement" },
>> + {"00002a2a-0000-1000-8000-00805f9b34fb","IEEE 11073-20601 Regulatory" },
>> + {"00002a36-0000-1000-8000-00805f9b34fb","Intermediate Cuff Pressure" },
>> + {"00002a1e-0000-1000-8000-00805f9b34fb","Intermediate Temperature" },
>> + {"00002a0f-0000-1000-8000-00805f9b34fb","Local Time Information" },
>> + {"00002a29-0000-1000-8000-00805f9b34fb","Manufacturer Name String" },
>> + {"00002a21-0000-1000-8000-00805f9b34fb","Measurement Interval" },
>> + {"00002a24-0000-1000-8000-00805f9b34fb","Model Number String" },
>> + {"00002a46-0000-1000-8000-00805f9b34fb","New Alert" },
>> + {"00002a04-0000-1000-8000-00805f9b34fb","Peripheral Preferred Connection Parameters" },
>> + {"00002a02-0000-1000-8000-00805f9b34fb","Peripheral Privacy Flag" },
>> + {"00002a03-0000-1000-8000-00805f9b34fb","Reconnection Address" },
>> + {"00002a14-0000-1000-8000-00805f9b34fb","Reference Time Information" },
>> + {"00002a40-0000-1000-8000-00805f9b34fb","Ringer Control Point" },
>> + {"00002a41-0000-1000-8000-00805f9b34fb","Ringer Setting" },
>> + {"00002a25-0000-1000-8000-00805f9b34fb","Serial Number String" },
>> + {"00002a05-0000-1000-8000-00805f9b34fb","Service Changed" },
>> + {"00002a28-0000-1000-8000-00805f9b34fb","Software Revision String" },
>> + {"00002a47-0000-1000-8000-00805f9b34fb","Supported New Alert Category" },
>> + {"00002a48-0000-1000-8000-00805f9b34fb","Supported Unread Alert Category" },
>> + {"00002a23-0000-1000-8000-00805f9b34fb","System ID" },
>> + {"00002a1c-0000-1000-8000-00805f9b34fb","Temperature Measurement" },
>> + {"00002a1d-0000-1000-8000-00805f9b34fb","Temperature Type" },
>> + {"00002a12-0000-1000-8000-00805f9b34fb","Time Accuracy" },
>> + {"00002a13-0000-1000-8000-00805f9b34fb","Time Source" },
>> + {"00002a16-0000-1000-8000-00805f9b34fb","Time Update Control Point" },
>> + {"00002a17-0000-1000-8000-00805f9b34fb","Time Update State" },
>> + {"00002a11-0000-1000-8000-00805f9b34fb","Time with DST" },
>> + {"00002a0e-0000-1000-8000-00805f9b34fb","Time Zone" },
>> + {"00002a07-0000-1000-8000-00805f9b34fb","Tx Power Level" },
>> + {"00002a45-0000-1000-8000-00805f9b34fb","Unread Alert Status" },
>> + { }
>> +};
>> +
>> static GSList *gatt_services = NULL;
>>
>> +static const struct characteristic_info *get_char_info(const char* uuid)
>
> I would leave this function returning name directly and not whole struct characteristic_info.
>
Why ? We have this struct with characteristic information (maybe later
we'll add more information. Why limit ourselves to name only ?
>> +{
>> + const struct characteristic_info *c;
>> +
>> + for (c = charInfo; c->uuid; c++) {
>> + if(g_strcmp0(c->uuid, uuid) == 0) {
>> + return c;
>> + }
>> + }
>> + return NULL;
>> +}
>> +
>> static void characteristic_free(void *user_data)
>> {
>> struct characteristic *chr = user_data;
>> @@ -190,7 +261,7 @@ static int watcher_cmp(gconstpointer a, gconstpointer b)
>> static void append_char_dict(DBusMessageIter *iter, struct characteristic *chr)
>> {
>> DBusMessageIter dict;
>> - const char *name = "";
>> + const struct characteristic_info *char_info;
>> char *uuid;
>>
>> dbus_message_iter_open_container(iter, DBUS_TYPE_ARRAY,
>> @@ -202,8 +273,14 @@ static void append_char_dict(DBusMessageIter *iter, struct characteristic *chr)
>> dict_append_entry(&dict, "UUID", DBUS_TYPE_STRING, &uuid);
>> g_free(uuid);
>>
>> - /* FIXME: Translate UUID to name. */
>> - dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
>> + char_info = get_char_info(chr->type);
>> +
>> + if (char_info != NULL) {
>> + const char *name = char_info->name;
>> + if (name != NULL)
>> + dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
>> + }
>> +
>>
>> if (chr->desc)
>> dict_append_entry(&dict, "Description", DBUS_TYPE_STRING,
>>
>
BR,
Chen Ganir
On Wednesday 29 of August 2012 13:56:16 [email protected] wrote:
> From: Chen Ganir <[email protected]>
Hi Chen,
> Translate Characteristic UUID's to name. This list was taken from
> the Bluetooth SIG developer site.
> ---
> attrib/client.c | 83 +++++++++++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 80 insertions(+), 3 deletions(-)
>
> diff --git a/attrib/client.c b/attrib/client.c
> index bb6adf8..4ef74b5 100644
> --- a/attrib/client.c
> +++ b/attrib/client.c
> @@ -105,8 +105,79 @@ struct watcher {
> struct gatt_service *gatt;
> };
>
> +struct characteristic_info {
> + const char *uuid;
> + const char *name;
> +};
> +
> +static const struct characteristic_info charInfo[] = {
> + {"00002a43-0000-1000-8000-00805f9b34fb","Alert Category ID" },
> + {"00002a42-0000-1000-8000-00805f9b34fb","Alert Category ID Bit Mask" },
> + {"00002a06-0000-1000-8000-00805f9b34fb","Alert Level" },
> + {"00002a44-0000-1000-8000-00805f9b34fb","Alert Notification Control Point" },
> + {"00002a3f-0000-1000-8000-00805f9b34fb","Alert Status" },
> + {"00002a01-0000-1000-8000-00805f9b34fb","Appearance" },
> + {"00002a49-0000-1000-8000-00805f9b34fb","Blood Pressure Feature" },
> + {"00002a35-0000-1000-8000-00805f9b34fb","Blood Pressure Measurement" },
> + {"00002a38-0000-1000-8000-00805f9b34fb","Body Sensor Location" },
> + {"00002a2b-0000-1000-8000-00805f9b34fb","Current Time" },
> + {"00002a08-0000-1000-8000-00805f9b34fb","Date Time" },
> + {"00002a0a-0000-1000-8000-00805f9b34fb","Day Date Time" },
> + {"00002a09-0000-1000-8000-00805f9b34fb","Day of Week" },
> + {"00002a00-0000-1000-8000-00805f9b34fb","Device Name" },
> + {"00002a0d-0000-1000-8000-00805f9b34fb","DST Offset" },
> + {"00002a0c-0000-1000-8000-00805f9b34fb","Exact Time 256" },
> + {"00002a26-0000-1000-8000-00805f9b34fb","Firmware Revision String" },
> + {"00002a27-0000-1000-8000-00805f9b34fb","Hardware Revision String" },
> + {"00002a39-0000-1000-8000-00805f9b34fb","Heart Rate Control Point" },
> + {"00002a37-0000-1000-8000-00805f9b34fb","Heart Rate Measurement" },
> + {"00002a2a-0000-1000-8000-00805f9b34fb","IEEE 11073-20601 Regulatory" },
> + {"00002a36-0000-1000-8000-00805f9b34fb","Intermediate Cuff Pressure" },
> + {"00002a1e-0000-1000-8000-00805f9b34fb","Intermediate Temperature" },
> + {"00002a0f-0000-1000-8000-00805f9b34fb","Local Time Information" },
> + {"00002a29-0000-1000-8000-00805f9b34fb","Manufacturer Name String" },
> + {"00002a21-0000-1000-8000-00805f9b34fb","Measurement Interval" },
> + {"00002a24-0000-1000-8000-00805f9b34fb","Model Number String" },
> + {"00002a46-0000-1000-8000-00805f9b34fb","New Alert" },
> + {"00002a04-0000-1000-8000-00805f9b34fb","Peripheral Preferred Connection Parameters" },
> + {"00002a02-0000-1000-8000-00805f9b34fb","Peripheral Privacy Flag" },
> + {"00002a03-0000-1000-8000-00805f9b34fb","Reconnection Address" },
> + {"00002a14-0000-1000-8000-00805f9b34fb","Reference Time Information" },
> + {"00002a40-0000-1000-8000-00805f9b34fb","Ringer Control Point" },
> + {"00002a41-0000-1000-8000-00805f9b34fb","Ringer Setting" },
> + {"00002a25-0000-1000-8000-00805f9b34fb","Serial Number String" },
> + {"00002a05-0000-1000-8000-00805f9b34fb","Service Changed" },
> + {"00002a28-0000-1000-8000-00805f9b34fb","Software Revision String" },
> + {"00002a47-0000-1000-8000-00805f9b34fb","Supported New Alert Category" },
> + {"00002a48-0000-1000-8000-00805f9b34fb","Supported Unread Alert Category" },
> + {"00002a23-0000-1000-8000-00805f9b34fb","System ID" },
> + {"00002a1c-0000-1000-8000-00805f9b34fb","Temperature Measurement" },
> + {"00002a1d-0000-1000-8000-00805f9b34fb","Temperature Type" },
> + {"00002a12-0000-1000-8000-00805f9b34fb","Time Accuracy" },
> + {"00002a13-0000-1000-8000-00805f9b34fb","Time Source" },
> + {"00002a16-0000-1000-8000-00805f9b34fb","Time Update Control Point" },
> + {"00002a17-0000-1000-8000-00805f9b34fb","Time Update State" },
> + {"00002a11-0000-1000-8000-00805f9b34fb","Time with DST" },
> + {"00002a0e-0000-1000-8000-00805f9b34fb","Time Zone" },
> + {"00002a07-0000-1000-8000-00805f9b34fb","Tx Power Level" },
> + {"00002a45-0000-1000-8000-00805f9b34fb","Unread Alert Status" },
> + { }
> +};
> +
> static GSList *gatt_services = NULL;
>
> +static const struct characteristic_info *get_char_info(const char* uuid)
I would leave this function returning name directly and not whole struct characteristic_info.
> +{
> + const struct characteristic_info *c;
> +
> + for (c = charInfo; c->uuid; c++) {
> + if(g_strcmp0(c->uuid, uuid) == 0) {
> + return c;
> + }
> + }
> + return NULL;
> +}
> +
> static void characteristic_free(void *user_data)
> {
> struct characteristic *chr = user_data;
> @@ -190,7 +261,7 @@ static int watcher_cmp(gconstpointer a, gconstpointer b)
> static void append_char_dict(DBusMessageIter *iter, struct characteristic *chr)
> {
> DBusMessageIter dict;
> - const char *name = "";
> + const struct characteristic_info *char_info;
> char *uuid;
>
> dbus_message_iter_open_container(iter, DBUS_TYPE_ARRAY,
> @@ -202,8 +273,14 @@ static void append_char_dict(DBusMessageIter *iter, struct characteristic *chr)
> dict_append_entry(&dict, "UUID", DBUS_TYPE_STRING, &uuid);
> g_free(uuid);
>
> - /* FIXME: Translate UUID to name. */
> - dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
> + char_info = get_char_info(chr->type);
> +
> + if (char_info != NULL) {
> + const char *name = char_info->name;
> + if (name != NULL)
> + dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
> + }
> +
>
> if (chr->desc)
> dict_append_entry(&dict, "Description", DBUS_TYPE_STRING,
>
--
BR
Szymon Janc
Szymon :
On 08/30/2012 03:43 PM, Szymon Janc wrote:
> On Thursday 30 of August 2012 15:38:04 Chen Ganir wrote:
>
>>>> static GSList *gatt_services = NULL;
>>>>
>>>> +static const struct characteristic_info *get_char_info(const char* uuid)
>>>
>>> I would leave this function returning name directly and not whole struct characteristic_info.
>>>
>> Why ? We have this struct with characteristic information (maybe later
>> we'll add more information. Why limit ourselves to name only ?
>
> If you plan to add more data into that structure then it is OK to return whole struct.
> But if only name is to be used, then I would just call that function get_name() and
> return name.
>
For now, i believe this is the only information we have for the
characteristic. I will send an updated patch.
BR,
Chen Ganir