2018-03-05 11:27:58

by Jaganath K

[permalink] [raw]
Subject: [PATCH v1 00/11] Ext scan/connect and PHY Configuration

The patch set implements extended scanning and conection and use it
based on the controller support.

This also implements PHY configuration mgmt commands and events
to set defualt PHY and PHYs to be used for scan and connect.

One downside of this approch is user cannot force kernel to use
legacy comands if controller is 5.0.

v1: Fixed data types of phy variables in Set PHY configuration and
Get PHY configuration commands

Jaganath Kanakkassery (11):
Bluetooth: Introduce helpers for LE set scan start and complete
Bluetooth: Use extended scanning if controller supports
Bluetooth: Process extended ADV report event
Bluetooth: Introduce helpers for le conn status and complete
Bluetooth: Use extended LE Connection if supported
Bluetooth: Define PHY flags in hdev and set 1M as default
Bluetooth: Implement Get PHY Configuration mgmt command
Bluetooth: Implement Set PHY Confguration command
Bluetooth: Set Scan PHYs based on selected PHYs by user
Bluetooth: Handle extended ADV PDU types
Bluetooth: Use selected PHYs in extended connect

include/net/bluetooth/hci.h | 110 ++++++++++++
include/net/bluetooth/hci_core.h | 15 ++
include/net/bluetooth/mgmt.h | 31 ++++
net/bluetooth/hci_conn.c | 103 +++++++++--
net/bluetooth/hci_core.c | 17 ++
net/bluetooth/hci_event.c | 371 ++++++++++++++++++++++++++++++++-------
net/bluetooth/hci_request.c | 156 +++++++++++-----
net/bluetooth/hci_sock.c | 1 +
net/bluetooth/mgmt.c | 231 ++++++++++++++++++++++++
9 files changed, 914 insertions(+), 121 deletions(-)

--
2.7.4



2018-03-05 11:28:09

by Jaganath K

[permalink] [raw]
Subject: [PATCH v1 11/11] Bluetooth: Use selected PHYs in extended connect

Use the selected PHYs by Set PHY Configuration management command
in extended create connection.

Signed-off-by: Jaganath Kanakkassery <[email protected]>
---
net/bluetooth/hci_conn.c | 63 ++++++++++++++++++++++++++++++++++++------------
1 file changed, 47 insertions(+), 16 deletions(-)

diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index db4118e..4591e09 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -764,8 +764,9 @@ static void hci_req_add_le_create_conn(struct hci_request *req,
if (use_ext_conn(hdev)) {
struct hci_cp_le_ext_create_conn *cp;
struct hci_cp_le_ext_conn_param *p;
- /* As of now only LE 1M is supported */
- u8 data[sizeof(*cp) + sizeof(*p) * 1];
+ u8 data[sizeof(*cp) + sizeof(*p) * 3];
+ u8 init_phys;
+ u32 plen;

cp = (void *) data;
p = (void *) cp->data;
@@ -775,24 +776,54 @@ static void hci_req_add_le_create_conn(struct hci_request *req,
bacpy(&cp->peer_addr, &conn->dst);
cp->peer_addr_type = conn->dst_type;
cp->own_addr_type = own_addr_type;
- cp->phys = LE_SCAN_PHY_1M;

- memset(p, 0, sizeof(*p));
+ if (scan_1m(hdev))
+ cp->phys |= LE_SCAN_PHY_1M;

- /* Set window to be the same value as the interval to enable
- * continuous scanning.
- */
+ if (scan_2m(hdev))
+ cp->phys |= LE_SCAN_PHY_2M;
+
+ if (scan_coded(hdev))
+ cp->phys |= LE_SCAN_PHY_CODED;
+
+ init_phys = cp->phys;
+
+ plen = sizeof(*cp);
+
+ /* Use same param for all PHYs */
+ while (init_phys) {
+ u16 min_interval, max_interval, supv_timeout;

- p->scan_interval = cpu_to_le16(hdev->le_scan_interval);
- p->scan_window = p->scan_interval;
- p->conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
- p->conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
- p->conn_latency = cpu_to_le16(conn->le_conn_latency);
- p->supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
- p->min_ce_len = cpu_to_le16(0x0000);
- p->max_ce_len = cpu_to_le16(0x0000);
+ if (!(init_phys & 0x01)) {
+ init_phys >>= 0x01;
+ continue;
+ }
+
+ memset(p, 0, sizeof(*p));
+
+ /* Set window to be the same value as the interval to
+ * enable continuous scanning.
+ */
+
+ min_interval = conn->le_conn_min_interval;
+ max_interval = conn->le_conn_max_interval;
+ supv_timeout = conn->le_supv_timeout;
+
+ p->scan_interval = cpu_to_le16(hdev->le_scan_interval);
+ p->scan_window = p->scan_interval;
+ p->conn_interval_min = cpu_to_le16(min_interval);
+ p->conn_interval_max = cpu_to_le16(max_interval);
+ p->conn_latency = cpu_to_le16(conn->le_conn_latency);
+ p->supervision_timeout = cpu_to_le16(supv_timeout);
+ p->min_ce_len = cpu_to_le16(0x0000);
+ p->max_ce_len = cpu_to_le16(0x0000);
+
+ p++;
+ plen += sizeof(*p);
+ init_phys >>= 1;
+ }

- hci_req_add(req, HCI_OP_LE_EXT_CREATE_CONN, sizeof(data), data);
+ hci_req_add(req, HCI_OP_LE_EXT_CREATE_CONN, plen, data);

} else {
struct hci_cp_le_create_conn cp;
--
2.7.4


2018-03-05 11:28:08

by Jaganath K

[permalink] [raw]
Subject: [PATCH v1 10/11] Bluetooth: Handle extended ADV PDU types

This patch defines the extended ADV types and handle it in ADV report.

Signed-off-by: Jaganath Kanakkassery <[email protected]>
---
include/net/bluetooth/hci.h | 8 ++++++++
net/bluetooth/hci_event.c | 49 +++++++++++++++++++++++++++++++--------------
2 files changed, 42 insertions(+), 15 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index feafac4..ee58389 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1964,6 +1964,14 @@ struct hci_ev_le_conn_complete {
#define LE_LEGACY_SCAN_RSP_ADV 0x001b
#define LE_LEGACY_SCAN_RSP_ADV_SCAN 0x001a

+/* Extended Advertising event types */
+#define LE_EXT_ADV_NON_CONN_IND 0x0000
+#define LE_EXT_ADV_CONN_IND 0x0001
+#define LE_EXT_ADV_SCAN_IND 0x0002
+#define LE_EXT_ADV_DIRECT_IND 0x0004
+#define LE_EXT_ADV_SCAN_RSP 0x0008
+#define LE_EXT_ADV_LEGACY_PDU 0x0010
+
#define ADDR_LE_DEV_PUBLIC 0x00
#define ADDR_LE_DEV_RANDOM 0x01

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 8558305..a416a24 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5122,20 +5122,39 @@ static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
hci_dev_unlock(hdev);
}

-static u8 convert_legacy_evt_type(u16 evt_type)
-{
- switch (evt_type) {
- case LE_LEGACY_ADV_IND:
- return LE_ADV_IND;
- case LE_LEGACY_ADV_DIRECT_IND:
- return LE_ADV_DIRECT_IND;
- case LE_LEGACY_ADV_SCAN_IND:
- return LE_ADV_SCAN_IND;
- case LE_LEGACY_NONCONN_IND:
- return LE_ADV_NONCONN_IND;
- case LE_LEGACY_SCAN_RSP_ADV:
- case LE_LEGACY_SCAN_RSP_ADV_SCAN:
- return LE_ADV_SCAN_RSP;
+static u8 convert_ext_evt_type(u16 evt_type)
+{
+ if (evt_type & LE_EXT_ADV_LEGACY_PDU) {
+ switch (evt_type) {
+ case LE_LEGACY_ADV_IND:
+ return LE_ADV_IND;
+ case LE_LEGACY_ADV_DIRECT_IND:
+ return LE_ADV_DIRECT_IND;
+ case LE_LEGACY_ADV_SCAN_IND:
+ return LE_ADV_SCAN_IND;
+ case LE_LEGACY_NONCONN_IND:
+ return LE_ADV_NONCONN_IND;
+ case LE_LEGACY_SCAN_RSP_ADV:
+ case LE_LEGACY_SCAN_RSP_ADV_SCAN:
+ return LE_ADV_SCAN_RSP;
+ }
+ } else {
+ if (evt_type & LE_EXT_ADV_CONN_IND) {
+ if (evt_type & LE_EXT_ADV_DIRECT_IND)
+ return LE_ADV_DIRECT_IND;
+
+ return LE_ADV_IND;
+ }
+
+ if (evt_type & LE_EXT_ADV_SCAN_RSP)
+ return LE_ADV_SCAN_RSP;
+
+ if (evt_type & LE_EXT_ADV_SCAN_IND)
+ return LE_ADV_SCAN_IND;
+
+ if (evt_type == LE_EXT_ADV_NON_CONN_IND ||
+ evt_type & LE_EXT_ADV_DIRECT_IND)
+ return LE_ADV_NONCONN_IND;
}

BT_ERR_RATELIMITED("Unknown advertising packet type: 0x%02x",
@@ -5157,7 +5176,7 @@ static void hci_le_ext_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
u16 evt_type;

evt_type = __le16_to_cpu(ev->evt_type);
- legacy_evt_type = convert_legacy_evt_type(evt_type);
+ legacy_evt_type = convert_ext_evt_type(evt_type);
if (legacy_evt_type != LE_ADV_INVALID) {
process_adv_report(hdev, legacy_evt_type, &ev->bdaddr,
ev->bdaddr_type, NULL, 0, ev->rssi,
--
2.7.4


2018-03-05 11:28:07

by Jaganath K

[permalink] [raw]
Subject: [PATCH v1 09/11] Bluetooth: Set Scan PHYs based on selected PHYs by user

Use the PHYs selected in Set Phy Configuration management command
while scanning.

< HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 13
Own address type: Random (0x01)
Filter policy: Accept all advertisement (0x00)
PHYs: 0x05
Entry 0: LE 1M
Type: Active (0x01)
Interval: 11.250 msec (0x0012)
Window: 11.250 msec (0x0012)
Entry 1: LE Coded
Type: Active (0x01)
Interval: 11.250 msec (0x0012)
Window: 11.250 msec (0x0012)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Enable (0x08|0x0042) ncmd 2
Status: Success (0x00)

Signed-off-by: Jaganath Kanakkassery <[email protected]>
---
include/net/bluetooth/hci.h | 4 +++-
include/net/bluetooth/hci_core.h | 9 +++++++++
net/bluetooth/hci_request.c | 42 ++++++++++++++++++++++++++++------------
3 files changed, 42 insertions(+), 13 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 4c6562d..feafac4 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1528,7 +1528,9 @@ struct hci_cp_le_set_ext_scan_params {
__u8 data[0];
} __packed;

-#define LE_SCAN_PHY_1M 0x01
+#define LE_SCAN_PHY_1M 0x01
+#define LE_SCAN_PHY_2M 0x02
+#define LE_SCAN_PHY_CODED 0x04

struct hci_cp_le_scan_phy_params {
__u8 type;
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index b0021ba..7f91564 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1156,6 +1156,15 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
#define bredr_sc_enabled(dev) (lmp_sc_capable(dev) && \
hci_dev_test_flag(dev, HCI_SC_ENABLED))

+#define scan_1m(dev) (hci_dev_test_flag(dev, HCI_LE_PHY_1M_TX) || \
+ hci_dev_test_flag(dev, HCI_LE_PHY_1M_RX))
+
+#define scan_2m(dev) (hci_dev_test_flag(dev, HCI_LE_PHY_2M_TX) || \
+ hci_dev_test_flag(dev, HCI_LE_PHY_2M_RX))
+
+#define scan_coded(dev) (hci_dev_test_flag(dev, HCI_LE_PHY_CODED_TX) || \
+ hci_dev_test_flag(dev, HCI_LE_PHY_CODED_RX))
+
/* Use ext scanning if set ext scan param and ext scan enable is supported */
#define use_ext_scan(dev) (((dev)->commands[37] & 0x20) && \
((dev)->commands[37] & 0x40))
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index f3def2e..078bdb0 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -799,15 +799,13 @@ static void hci_req_start_scan(struct hci_request *req, u8 type, u16 interval,
{
struct hci_dev *hdev = req->hdev;

- /* Use ext scanning if set ext scan param and ext scan enable is
- * supported
- */
if (use_ext_scan(hdev)) {
struct hci_cp_le_set_ext_scan_params *ext_param_cp;
struct hci_cp_le_set_ext_scan_enable ext_enable_cp;
struct hci_cp_le_scan_phy_params *phy_params;
- /* Ony single PHY (1M) is supported as of now */
- u8 data[sizeof(*ext_param_cp) + sizeof(*phy_params) * 1];
+ u8 data[sizeof(*ext_param_cp) + sizeof(*phy_params) * 2];
+ u32 plen;
+ u8 scan_phys;

ext_param_cp = (void *)data;
phy_params = (void *)ext_param_cp->data;
@@ -815,16 +813,36 @@ static void hci_req_start_scan(struct hci_request *req, u8 type, u16 interval,
memset(ext_param_cp, 0, sizeof(*ext_param_cp));
ext_param_cp->own_addr_type = own_addr_type;
ext_param_cp->filter_policy = filter_policy;
- ext_param_cp->scanning_phys = LE_SCAN_PHY_1M;

- memset(phy_params, 0, sizeof(*phy_params));
- phy_params->type = type;
- phy_params->interval = cpu_to_le16(interval);
- phy_params->window = cpu_to_le16(window);
+ plen = sizeof(*ext_param_cp);
+
+ if (scan_1m(hdev) || scan_2m(hdev))
+ ext_param_cp->scanning_phys |= LE_SCAN_PHY_1M;
+
+ if (scan_coded(hdev))
+ ext_param_cp->scanning_phys |= LE_SCAN_PHY_CODED;
+
+ scan_phys = ext_param_cp->scanning_phys;
+
+ while (scan_phys) {
+ if (!(scan_phys & 0x01)) {
+ scan_phys >>= 0x01;
+ continue;
+ }
+
+ memset(phy_params, 0, sizeof(*phy_params));
+ phy_params->type = type;
+ phy_params->interval = cpu_to_le16(interval);
+ phy_params->window = cpu_to_le16(window);
+
+ plen += sizeof(*phy_params);
+ phy_params++;
+
+ scan_phys >>= 0x01;
+ }

hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_PARAMS,
- sizeof(*ext_param_cp) + sizeof(*phy_params),
- ext_param_cp);
+ plen, ext_param_cp);

memset(&ext_enable_cp, 0, sizeof(ext_enable_cp));
ext_enable_cp.enable = LE_SCAN_ENABLE;
--
2.7.4


2018-03-05 11:28:06

by Jaganath K

[permalink] [raw]
Subject: [PATCH v1 08/11] Bluetooth: Implement Set PHY Confguration command

This enables user to set default phys which will be set
to the controller which inturn use those PHYs in all subsequent
connections. Also host will use the same in scanning as well.

This patch also implements PHY Changed event which will be
triggered whenever default PHYs change.

This also adds PHY_CONFIGURATION to mgmt settings which set
in the supported settings if controller supports 2M or CODED,
and set in current settings if either 2M or CODED is selected
as the default PHYs

@ MGMT Command: Set PHY Configuration (0x0045) plen 2
Default PHYs: 0x003f
1MTX
1MRX
2MTX
2MRX
CODEDTX
CODEDRX
< HCI Command: LE Set Default PHY (0x08|0x0031) plen 3
All PHYs preference: 0x00
TX PHYs preference: 0x07
LE 1M
LE 2M
LE Coded
RX PHYs preference: 0x07
LE 1M
LE 2M
LE Coded
> HCI Event: Command Complete (0x0e) plen 4
LE Set Default PHY (0x08|0x0031) ncmd 1
Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 3
Set PHY Configuration (0x0045) plen 0
Status: Success (0x00)
@ MGMT Event: PHY Configuration Changed (0x0026) plen 2
Selected PHYs: 0x003f
1MTX
1MRX
2MTX
2MRX
CODEDTX
CODEDRX
@ MGMT Event: New Settings (0x0006) plen 4
Current settings: 0x00010ad1
Powered
Bondable
Secure Simple Pairing
BR/EDR
Low Energy
Secure Connections
PHY Configuration

Signed-off-by: Jaganath Kanakkassery <[email protected]>
---
include/net/bluetooth/hci.h | 5 ++
include/net/bluetooth/mgmt.h | 17 +++++
net/bluetooth/hci_event.c | 57 ++++++++++++++++
net/bluetooth/hci_sock.c | 1 +
net/bluetooth/mgmt.c | 154 +++++++++++++++++++++++++++++++++++++++++++
5 files changed, 234 insertions(+)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 93164af..4c6562d 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -214,6 +214,7 @@ enum {
HCI_MGMT_DEV_CLASS_EVENTS,
HCI_MGMT_LOCAL_NAME_EVENTS,
HCI_MGMT_OOB_DATA_EVENTS,
+ HCI_MGMT_PHY_CHANGED_EVENTS,
};

/*
@@ -1515,6 +1516,10 @@ struct hci_cp_le_set_default_phy {
__u8 rx_phys;
} __packed;

+#define HCI_LE_SET_PHY_1M 0x01
+#define HCI_LE_SET_PHY_2M 0x02
+#define HCI_LE_SET_PHY_CODED 0x04
+
#define HCI_OP_LE_SET_EXT_SCAN_PARAMS 0x2041
struct hci_cp_le_set_ext_scan_params {
__u8 own_addr_type;
diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h
index da9675c..7c8c68cc 100644
--- a/include/net/bluetooth/mgmt.h
+++ b/include/net/bluetooth/mgmt.h
@@ -101,6 +101,7 @@ struct mgmt_rp_read_index_list {
#define MGMT_SETTING_PRIVACY 0x00002000
#define MGMT_SETTING_CONFIGURATION 0x00004000
#define MGMT_SETTING_STATIC_ADDRESS 0x00008000
+#define MGMT_SETTING_PHY_CONFIGURATION 0x00010000

#define MGMT_OP_READ_INFO 0x0004
#define MGMT_READ_INFO_SIZE 0
@@ -618,6 +619,17 @@ struct mgmt_rp_get_phy_confguration {
#define MGMT_PHY_LE_CODED_TX 0x0010
#define MGMT_PHY_LE_CODED_RX 0x0020

+#define MGMT_PHY_LE_TX_MASK (MGMT_PHY_LE_1M_TX | MGMT_PHY_LE_2M_TX | \
+ MGMT_PHY_LE_CODED_TX)
+#define MGMT_PHY_LE_RX_MASK (MGMT_PHY_LE_1M_RX | MGMT_PHY_LE_2M_RX | \
+ MGMT_PHY_LE_CODED_RX)
+
+#define MGMT_OP_SET_PHY_CONFIGURATION 0x0045
+#define MGMT_SET_PHY_CONFIGURATION_SIZE 2
+struct mgmt_cp_set_phy_confguration {
+ __le16 default_phys;
+} __packed;
+
#define MGMT_EV_CMD_COMPLETE 0x0001
struct mgmt_ev_cmd_complete {
__le16 opcode;
@@ -838,3 +850,8 @@ struct mgmt_ev_ext_info_changed {
__le16 eir_len;
__u8 eir[0];
} __packed;
+
+#define MGMT_EV_PHY_CONFIGURATION_CHANGED 0x0026
+struct mgmt_ev_phy_configuration_changed {
+ __le16 selected_phys;
+} __packed;
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 4d757a5..8558305 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1041,6 +1041,59 @@ static void hci_cc_le_set_random_addr(struct hci_dev *hdev, struct sk_buff *skb)
hci_dev_unlock(hdev);
}

+static void hci_cc_le_set_default_phy(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ __u8 status = *((__u8 *) skb->data);
+ struct hci_cp_le_set_default_phy *cp;
+
+ BT_DBG("%s status 0x%2.2x", hdev->name, status);
+
+ if (status)
+ return;
+
+ cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_DEFAULT_PHY);
+ if (!cp)
+ return;
+
+ hci_dev_lock(hdev);
+
+ /* Clear previous PHY flags */
+ hci_dev_clear_flag(hdev, HCI_LE_PHY_1M_TX);
+ hci_dev_clear_flag(hdev, HCI_LE_PHY_1M_RX);
+ hci_dev_clear_flag(hdev, HCI_LE_PHY_2M_TX);
+ hci_dev_clear_flag(hdev, HCI_LE_PHY_2M_RX);
+ hci_dev_clear_flag(hdev, HCI_LE_PHY_CODED_TX);
+ hci_dev_clear_flag(hdev, HCI_LE_PHY_CODED_RX);
+
+ if (cp->all_phys & 0x01) {
+ hci_dev_set_flag(hdev, HCI_LE_PHY_1M_TX);
+ } else {
+ if (cp->tx_phys & HCI_LE_SET_PHY_1M)
+ hci_dev_set_flag(hdev, HCI_LE_PHY_1M_TX);
+
+ if (cp->tx_phys & HCI_LE_SET_PHY_2M)
+ hci_dev_set_flag(hdev, HCI_LE_PHY_2M_TX);
+
+ if (cp->tx_phys & HCI_LE_SET_PHY_CODED)
+ hci_dev_set_flag(hdev, HCI_LE_PHY_CODED_TX);
+ }
+
+ if (cp->all_phys & 0x02) {
+ hci_dev_set_flag(hdev, HCI_LE_PHY_1M_RX);
+ } else {
+ if (cp->rx_phys & HCI_LE_SET_PHY_1M)
+ hci_dev_set_flag(hdev, HCI_LE_PHY_1M_RX);
+
+ if (cp->rx_phys & HCI_LE_SET_PHY_2M)
+ hci_dev_set_flag(hdev, HCI_LE_PHY_2M_RX);
+
+ if (cp->rx_phys & HCI_LE_SET_PHY_CODED)
+ hci_dev_set_flag(hdev, HCI_LE_PHY_CODED_RX);
+ }
+
+ hci_dev_unlock(hdev);
+}
+
static void hci_cc_le_set_adv_enable(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 *sent, status = *((__u8 *) skb->data);
@@ -3128,6 +3181,10 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb,
hci_cc_le_set_ext_scan_enable(hdev, skb);
break;

+ case HCI_OP_LE_SET_DEFAULT_PHY:
+ hci_cc_le_set_default_phy(hdev, skb);
+ break;
+
default:
BT_DBG("%s opcode 0x%4.4x", hdev->name, *opcode);
break;
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 1506e16..476916c 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -1328,6 +1328,7 @@ static int hci_sock_bind(struct socket *sock, struct sockaddr *addr,
hci_sock_set_flag(sk, HCI_MGMT_SETTING_EVENTS);
hci_sock_set_flag(sk, HCI_MGMT_DEV_CLASS_EVENTS);
hci_sock_set_flag(sk, HCI_MGMT_LOCAL_NAME_EVENTS);
+ hci_sock_set_flag(sk, HCI_MGMT_PHY_CHANGED_EVENTS);
}
break;
}
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 3bc574d..7c6e866 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -648,6 +648,9 @@ static u32 get_supported_settings(struct hci_dev *hdev)
settings |= MGMT_SETTING_SECURE_CONN;
settings |= MGMT_SETTING_PRIVACY;
settings |= MGMT_SETTING_STATIC_ADDRESS;
+ if (hdev->le_features[1] & HCI_LE_PHY_2M ||
+ hdev->le_features[1] & HCI_LE_PHY_CODED)
+ settings |= MGMT_SETTING_PHY_CONFIGURATION;
}

if (test_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks) ||
@@ -722,6 +725,12 @@ static u32 get_current_settings(struct hci_dev *hdev)
settings |= MGMT_SETTING_STATIC_ADDRESS;
}

+ if (hci_dev_test_flag(hdev, HCI_LE_PHY_2M_TX) ||
+ hci_dev_test_flag(hdev, HCI_LE_PHY_2M_RX) ||
+ hci_dev_test_flag(hdev, HCI_LE_PHY_CODED_TX) ||
+ hci_dev_test_flag(hdev, HCI_LE_PHY_CODED_RX))
+ settings |= MGMT_SETTING_PHY_CONFIGURATION;
+
return settings;
}

@@ -3260,6 +3269,150 @@ static int get_phy_configuration(struct sock *sk, struct hci_dev *hdev,
&rp, sizeof(rp));
}

+static int phy_configuration_changed(struct hci_dev *hdev, struct sock *skip)
+{
+ struct mgmt_ev_phy_configuration_changed ev;
+
+ memset(&ev, 0, sizeof(ev));
+
+ ev.selected_phys = cpu_to_le16(get_selected_phys(hdev));
+
+ return mgmt_limited_event(MGMT_EV_PHY_CONFIGURATION_CHANGED, hdev, &ev,
+ sizeof(ev), HCI_MGMT_PHY_CHANGED_EVENTS,
+ skip);
+}
+
+static void set_default_phy_complete(struct hci_dev *hdev, u8 status,
+ u16 opcode, struct sk_buff *skb)
+{
+ struct mgmt_cp_set_phy_confguration *cp;
+ struct mgmt_pending_cmd *cmd;
+
+ BT_DBG("status 0x%02x", status);
+
+ hci_dev_lock(hdev);
+
+ cmd = pending_find(MGMT_OP_SET_PHY_CONFIGURATION, hdev);
+ if (!cmd)
+ goto unlock;
+
+ cp = cmd->param;
+
+ if (status) {
+ mgmt_cmd_status(cmd->sk, hdev->id,
+ MGMT_OP_SET_PHY_CONFIGURATION,
+ mgmt_status(status));
+ } else {
+ mgmt_cmd_complete(cmd->sk, hdev->id,
+ MGMT_OP_SET_PHY_CONFIGURATION, 0,
+ NULL, 0);
+
+ phy_configuration_changed(hdev, cmd->sk);
+ new_settings(hdev, cmd->sk);
+ }
+
+ mgmt_pending_remove(cmd);
+
+unlock:
+ hci_dev_unlock(hdev);
+}
+
+static int set_phy_configuration(struct sock *sk, struct hci_dev *hdev,
+ void *data, u16 len)
+{
+ struct mgmt_cp_set_phy_confguration *cp = data;
+ struct hci_cp_le_set_default_phy cp_phy;
+ struct mgmt_pending_cmd *cmd;
+ struct hci_request req;
+ u16 default_phys, supported_phys, selected_phys;
+ u8 status;
+ int err;
+
+ BT_DBG("sock %p %s", sk, hdev->name);
+
+ status = mgmt_le_support(hdev);
+ if (status)
+ return mgmt_cmd_status(sk, hdev->id,
+ MGMT_OP_SET_PHY_CONFIGURATION, status);
+
+ supported_phys = get_supported_phys(hdev);
+ default_phys = __le16_to_cpu(cp->default_phys);
+
+ if (default_phys & ~supported_phys)
+ return mgmt_cmd_status(sk, hdev->id,
+ MGMT_OP_SET_PHY_CONFIGURATION,
+ MGMT_STATUS_INVALID_PARAMS);
+
+ selected_phys = get_selected_phys(hdev);
+
+ if (default_phys == selected_phys)
+ return mgmt_cmd_complete(sk, hdev->id,
+ MGMT_OP_SET_PHY_CONFIGURATION,
+ 0, NULL, 0);
+
+ hci_dev_lock(hdev);
+
+ if (!hdev_is_powered(hdev)) {
+ err = mgmt_cmd_status(sk, hdev->id,
+ MGMT_OP_SET_PHY_CONFIGURATION,
+ MGMT_STATUS_REJECTED);
+ goto unlock;
+ }
+
+ if (pending_find(MGMT_OP_SET_PHY_CONFIGURATION, hdev)) {
+ err = mgmt_cmd_status(sk, hdev->id,
+ MGMT_OP_SET_PHY_CONFIGURATION,
+ MGMT_STATUS_BUSY);
+ goto unlock;
+ }
+
+ cmd = mgmt_pending_add(sk, MGMT_OP_SET_PHY_CONFIGURATION, hdev, data,
+ len);
+ if (!cmd) {
+ err = -ENOMEM;
+ goto unlock;
+ }
+
+ hci_req_init(&req, hdev);
+
+ memset(&cp_phy, 0, sizeof(cp_phy));
+
+ if (!(default_phys & MGMT_PHY_LE_TX_MASK))
+ cp_phy.all_phys |= 0x01;
+
+ if (!(default_phys & MGMT_PHY_LE_RX_MASK))
+ cp_phy.all_phys |= 0x02;
+
+ if (default_phys & MGMT_PHY_LE_1M_TX)
+ cp_phy.tx_phys |= HCI_LE_SET_PHY_1M;
+
+ if (default_phys & MGMT_PHY_LE_2M_TX)
+ cp_phy.tx_phys |= HCI_LE_SET_PHY_2M;
+
+ if (default_phys & MGMT_PHY_LE_CODED_TX)
+ cp_phy.tx_phys |= HCI_LE_SET_PHY_CODED;
+
+ if (default_phys & MGMT_PHY_LE_1M_RX)
+ cp_phy.rx_phys |= HCI_LE_SET_PHY_1M;
+
+ if (default_phys & MGMT_PHY_LE_2M_RX)
+ cp_phy.rx_phys |= HCI_LE_SET_PHY_2M;
+
+ if (default_phys & MGMT_PHY_LE_CODED_RX)
+ cp_phy.rx_phys |= HCI_LE_SET_PHY_CODED;
+
+ hci_req_add(&req, HCI_OP_LE_SET_DEFAULT_PHY, sizeof(cp_phy), &cp_phy);
+
+ err = hci_req_run_skb(&req, set_default_phy_complete);
+ if (err < 0)
+ mgmt_pending_remove(cmd);
+
+unlock:
+ hci_dev_unlock(hdev);
+
+ return err;
+}
+
static void read_local_oob_data_complete(struct hci_dev *hdev, u8 status,
u16 opcode, struct sk_buff *skb)
{
@@ -6620,6 +6773,7 @@ static const struct hci_mgmt_handler mgmt_handlers[] = {
HCI_MGMT_UNTRUSTED },
{ set_appearance, MGMT_SET_APPEARANCE_SIZE },
{ get_phy_configuration, MGMT_GET_PHY_CONFIGURATION_SIZE },
+ { set_phy_configuration, MGMT_SET_PHY_CONFIGURATION_SIZE },
};

void mgmt_index_added(struct hci_dev *hdev)
--
2.7.4


2018-03-05 11:28:05

by Jaganath K

[permalink] [raw]
Subject: [PATCH v1 07/11] Bluetooth: Implement Get PHY Configuration mgmt command

This commands basically retrieve the supported PHYs of the
LE controller. 1M would be supported by default. Other PHYs
are supported based on the local LE features.

@ MGMT Command: Get PHY Configuration (0x0044) plen 0
@ MGMT Event: Command Complete (0x0001) plen 7
Get PHY Configuration (0x0044) plen 4
Status: Success (0x00)
Supported PHYs: 0x003f
1MTX
1MRX
2MTX
2MRX
CODEDTX
CODEDRX
Selected PHYs: 0x003f
1MTX
1MRX
2MTX
2MRX
CODEDTX
CODEDRX

Signed-off-by: Jaganath Kanakkassery <[email protected]>
---
include/net/bluetooth/hci.h | 2 ++
include/net/bluetooth/mgmt.h | 14 ++++++++
net/bluetooth/mgmt.c | 77 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 93 insertions(+)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index c4105e6..93164af 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -406,6 +406,8 @@ enum {
#define HCI_LE_PING 0x10
#define HCI_LE_DATA_LEN_EXT 0x20
#define HCI_LE_EXT_SCAN_POLICY 0x80
+#define HCI_LE_PHY_2M 0x01
+#define HCI_LE_PHY_CODED 0x08
#define HCI_LE_CHAN_SEL_ALG2 0x40

/* Connection modes */
diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h
index e7303ee..da9675c 100644
--- a/include/net/bluetooth/mgmt.h
+++ b/include/net/bluetooth/mgmt.h
@@ -604,6 +604,20 @@ struct mgmt_cp_set_appearance {
} __packed;
#define MGMT_SET_APPEARANCE_SIZE 2

+#define MGMT_OP_GET_PHY_CONFIGURATION 0x0044
+#define MGMT_GET_PHY_CONFIGURATION_SIZE 0
+struct mgmt_rp_get_phy_confguration {
+ __le16 supported_phys;
+ __le16 selected_phys;
+} __packed;
+
+#define MGMT_PHY_LE_1M_TX 0x0001
+#define MGMT_PHY_LE_1M_RX 0x0002
+#define MGMT_PHY_LE_2M_TX 0x0004
+#define MGMT_PHY_LE_2M_RX 0x0008
+#define MGMT_PHY_LE_CODED_TX 0x0010
+#define MGMT_PHY_LE_CODED_RX 0x0020
+
#define MGMT_EV_CMD_COMPLETE 0x0001
struct mgmt_ev_cmd_complete {
__le16 opcode;
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 6e9fc86..3bc574d 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -725,6 +725,56 @@ static u32 get_current_settings(struct hci_dev *hdev)
return settings;
}

+static u16 get_supported_phys(struct hci_dev *hdev)
+{
+ u16 supported_phys = 0;
+
+ if (!lmp_le_capable(hdev))
+ return 0;
+
+ supported_phys |= MGMT_PHY_LE_1M_TX;
+ supported_phys |= MGMT_PHY_LE_1M_RX;
+
+ if (hdev->le_features[1] & HCI_LE_PHY_2M) {
+ supported_phys |= MGMT_PHY_LE_2M_TX;
+ supported_phys |= MGMT_PHY_LE_2M_RX;
+ }
+ if (hdev->le_features[1] & HCI_LE_PHY_CODED) {
+ supported_phys |= MGMT_PHY_LE_CODED_TX;
+ supported_phys |= MGMT_PHY_LE_CODED_RX;
+ }
+
+ return supported_phys;
+}
+
+static u16 get_selected_phys(struct hci_dev *hdev)
+{
+ u16 selected_phys = 0;
+
+ if (!lmp_le_capable(hdev))
+ return 0;
+
+ if (hci_dev_test_flag(hdev, HCI_LE_PHY_1M_TX))
+ selected_phys |= MGMT_PHY_LE_1M_TX;
+
+ if (hci_dev_test_flag(hdev, HCI_LE_PHY_1M_RX))
+ selected_phys |= MGMT_PHY_LE_1M_RX;
+
+ if (hci_dev_test_flag(hdev, HCI_LE_PHY_2M_TX))
+ selected_phys |= MGMT_PHY_LE_2M_TX;
+
+ if (hci_dev_test_flag(hdev, HCI_LE_PHY_2M_RX))
+ selected_phys |= MGMT_PHY_LE_2M_RX;
+
+ if (hci_dev_test_flag(hdev, HCI_LE_PHY_CODED_TX))
+ selected_phys |= MGMT_PHY_LE_CODED_TX;
+
+ if (hci_dev_test_flag(hdev, HCI_LE_PHY_CODED_RX))
+ selected_phys |= MGMT_PHY_LE_CODED_RX;
+
+ return selected_phys;
+}
+
static struct mgmt_pending_cmd *pending_find(u16 opcode, struct hci_dev *hdev)
{
return mgmt_pending_find(HCI_CHANNEL_CONTROL, opcode, hdev);
@@ -3184,6 +3234,32 @@ static int set_appearance(struct sock *sk, struct hci_dev *hdev, void *data,
return err;
}

+static int get_phy_configuration(struct sock *sk, struct hci_dev *hdev,
+ void *data, u16 len)
+{
+ struct mgmt_rp_get_phy_confguration rp;
+ u8 status;
+
+ BT_DBG("sock %p %s", sk, hdev->name);
+
+ status = mgmt_le_support(hdev);
+ if (status)
+ return mgmt_cmd_status(sk, hdev->id,
+ MGMT_OP_GET_PHY_CONFIGURATION, status);
+
+ hci_dev_lock(hdev);
+
+ memset(&rp, 0, sizeof(rp));
+
+ rp.supported_phys = cpu_to_le16(get_supported_phys(hdev));
+ rp.selected_phys = cpu_to_le16(get_selected_phys(hdev));
+
+ hci_dev_unlock(hdev);
+
+ return mgmt_cmd_complete(sk, hdev->id, MGMT_OP_GET_PHY_CONFIGURATION, 0,
+ &rp, sizeof(rp));
+}
+
static void read_local_oob_data_complete(struct hci_dev *hdev, u8 status,
u16 opcode, struct sk_buff *skb)
{
@@ -6543,6 +6619,7 @@ static const struct hci_mgmt_handler mgmt_handlers[] = {
{ read_ext_controller_info,MGMT_READ_EXT_INFO_SIZE,
HCI_MGMT_UNTRUSTED },
{ set_appearance, MGMT_SET_APPEARANCE_SIZE },
+ { get_phy_configuration, MGMT_GET_PHY_CONFIGURATION_SIZE },
};

void mgmt_index_added(struct hci_dev *hdev)
--
2.7.4


2018-03-05 11:28:04

by Jaganath K

[permalink] [raw]
Subject: [PATCH v1 06/11] Bluetooth: Define PHY flags in hdev and set 1M as default

1M is mandatory to be supported by LE controllers and the same
would be set in power on. This patch defines hdev flags for
LE PHYs and set 1M to default.

Signed-off-by: Jaganath Kanakkassery <[email protected]>
---
include/net/bluetooth/hci.h | 7 +++++++
net/bluetooth/hci_core.c | 4 ++++
2 files changed, 11 insertions(+)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 85ceeb9..c4105e6 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -261,6 +261,13 @@ enum {
HCI_FORCE_BREDR_SMP,
HCI_FORCE_STATIC_ADDR,

+ HCI_LE_PHY_1M_TX,
+ HCI_LE_PHY_1M_RX,
+ HCI_LE_PHY_2M_TX,
+ HCI_LE_PHY_2M_RX,
+ HCI_LE_PHY_CODED_TX,
+ HCI_LE_PHY_CODED_RX,
+
__HCI_NUM_FLAGS,
};

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index cdc9616..45df3ad 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -322,6 +322,10 @@ static void le_setup(struct hci_request *req)
/* LE-only controllers have LE implicitly enabled */
if (!lmp_bredr_capable(hdev))
hci_dev_set_flag(hdev, HCI_LE_ENABLED);
+
+ /* Set PHY to 1M for TX and RX */
+ hci_dev_set_flag(hdev, HCI_LE_PHY_1M_TX);
+ hci_dev_set_flag(hdev, HCI_LE_PHY_1M_RX);
}

static void hci_setup_event_mask(struct hci_request *req)
--
2.7.4


2018-03-05 11:28:03

by Jaganath K

[permalink] [raw]
Subject: [PATCH v1 05/11] Bluetooth: Use extended LE Connection if supported

This implements extended LE craete connection and enhanced
LE conn complete event if the controller supports.

For now it is as good as legacy LE connection and event as
no new features in the extended connection is handled.

< HCI Command: LE Extended Create Connection (0x08|0x0043) plen 26
Filter policy: White list is not used (0x00)
Own address type: Public (0x00)
Peer address type: Random (0x01)
Peer address: DB:7E:2E:1D:85:E8 (Static)
Initiating PHYs: 0x01
Entry 0: LE 1M
Scan interval: 60.000 msec (0x0060)
Scan window: 60.000 msec (0x0060)
Min connection interval: 50.00 msec (0x0028)
Max connection interval: 70.00 msec (0x0038)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Min connection length: 0.000 msec (0x0000)
Max connection length: 0.000 msec (0x0000)
> HCI Event: Command Status (0x0f) plen 4
LE Extended Create Connection (0x08|0x0043) ncmd 2
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 31
LE Enhanced Connection Complete (0x0a)
Status: Success (0x00)
Handle: 3585
Role: Master (0x00)
Peer address type: Random (0x01)
Peer address: DB:7E:2E:1D:85:E8 (Static)
Local resolvable private address: 00:00:00:00:00:00 (Non-Resolvable)
Peer resolvable private address: 00:00:00:00:00:00 (Non-Resolvable)
Connection interval: 67.50 msec (0x0036)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Master clock accuracy: 0x00
@ MGMT Event: Device Connected (0x000b) plen 40
LE Address: DB:7E:2E:1D:85:E8 (Static)
Flags: 0x00000000
Data length: 27
Name (complete): Designer Mouse
Appearance: Mouse (0x03c2)
Flags: 0x05
LE Limited Discoverable Mode
BR/EDR Not Supported
16-bit Service UUIDs (complete): 1 entry
Human Interface Device (0x1812)

Signed-off-by: Jaganath Kanakkassery <[email protected]>
---
include/net/bluetooth/hci.h | 36 ++++++++++++++++++++
include/net/bluetooth/hci_core.h | 2 ++
net/bluetooth/hci_conn.c | 72 ++++++++++++++++++++++++++++++----------
net/bluetooth/hci_core.c | 6 ++++
net/bluetooth/hci_event.c | 47 ++++++++++++++++++++++++++
5 files changed, 145 insertions(+), 18 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 34eaaf9..85ceeb9 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1530,6 +1530,27 @@ struct hci_cp_le_set_ext_scan_enable {
__le16 period;
} __packed;

+#define HCI_OP_LE_EXT_CREATE_CONN 0x2043
+struct hci_cp_le_ext_create_conn {
+ __u8 filter_policy;
+ __u8 own_addr_type;
+ __u8 peer_addr_type;
+ bdaddr_t peer_addr;
+ __u8 phys;
+ __u8 data[0];
+} __packed;
+
+struct hci_cp_le_ext_conn_param {
+ __le16 scan_interval;
+ __le16 scan_window;
+ __le16 conn_interval_min;
+ __le16 conn_interval_max;
+ __le16 conn_latency;
+ __le16 supervision_timeout;
+ __le16 min_ce_len;
+ __le16 max_ce_len;
+} __packed;
+
/* ---- HCI Events ---- */
#define HCI_EV_INQUIRY_COMPLETE 0x01

@@ -2007,6 +2028,21 @@ struct hci_ev_le_ext_adv_report {
__u8 data[0];
} __packed;

+#define HCI_EV_LE_ENHANCED_CONN_COMPLETE 0x0a
+struct hci_ev_le_enh_conn_complete {
+ __u8 status;
+ __le16 handle;
+ __u8 role;
+ __u8 bdaddr_type;
+ bdaddr_t bdaddr;
+ bdaddr_t local_rpa;
+ bdaddr_t peer_rpa;
+ __le16 interval;
+ __le16 latency;
+ __le16 supervision_timeout;
+ __u8 clk_accurancy;
+} __packed;
+
/* Internal events generated by Bluetooth stack */
#define HCI_EV_STACK_INTERNAL 0xfd
struct hci_ev_stack_internal {
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 4b32601..b0021ba 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1160,6 +1160,8 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
#define use_ext_scan(dev) (((dev)->commands[37] & 0x20) && \
((dev)->commands[37] & 0x40))

+#define use_ext_conn(dev) ((dev)->commands[37] & 0x80)
+
/* ----- HCI protocols ----- */
#define HCI_PROTO_DEFER 0x01

diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index a968253..db4118e 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -751,7 +751,6 @@ static bool conn_use_rpa(struct hci_conn *conn)
static void hci_req_add_le_create_conn(struct hci_request *req,
struct hci_conn *conn)
{
- struct hci_cp_le_create_conn cp;
struct hci_dev *hdev = conn->hdev;
u8 own_addr_type;

@@ -762,25 +761,62 @@ static void hci_req_add_le_create_conn(struct hci_request *req,
&own_addr_type))
return;

- memset(&cp, 0, sizeof(cp));
+ if (use_ext_conn(hdev)) {
+ struct hci_cp_le_ext_create_conn *cp;
+ struct hci_cp_le_ext_conn_param *p;
+ /* As of now only LE 1M is supported */
+ u8 data[sizeof(*cp) + sizeof(*p) * 1];

- /* Set window to be the same value as the interval to enable
- * continuous scanning.
- */
- cp.scan_interval = cpu_to_le16(hdev->le_scan_interval);
- cp.scan_window = cp.scan_interval;
+ cp = (void *) data;
+ p = (void *) cp->data;

- bacpy(&cp.peer_addr, &conn->dst);
- cp.peer_addr_type = conn->dst_type;
- cp.own_address_type = own_addr_type;
- cp.conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
- cp.conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
- cp.conn_latency = cpu_to_le16(conn->le_conn_latency);
- cp.supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
- cp.min_ce_len = cpu_to_le16(0x0000);
- cp.max_ce_len = cpu_to_le16(0x0000);
-
- hci_req_add(req, HCI_OP_LE_CREATE_CONN, sizeof(cp), &cp);
+ memset(cp, 0, sizeof(*cp));
+
+ bacpy(&cp->peer_addr, &conn->dst);
+ cp->peer_addr_type = conn->dst_type;
+ cp->own_addr_type = own_addr_type;
+ cp->phys = LE_SCAN_PHY_1M;
+
+ memset(p, 0, sizeof(*p));
+
+ /* Set window to be the same value as the interval to enable
+ * continuous scanning.
+ */
+
+ p->scan_interval = cpu_to_le16(hdev->le_scan_interval);
+ p->scan_window = p->scan_interval;
+ p->conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
+ p->conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
+ p->conn_latency = cpu_to_le16(conn->le_conn_latency);
+ p->supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
+ p->min_ce_len = cpu_to_le16(0x0000);
+ p->max_ce_len = cpu_to_le16(0x0000);
+
+ hci_req_add(req, HCI_OP_LE_EXT_CREATE_CONN, sizeof(data), data);
+
+ } else {
+ struct hci_cp_le_create_conn cp;
+
+ memset(&cp, 0, sizeof(cp));
+
+ /* Set window to be the same value as the interval to enable
+ * continuous scanning.
+ */
+ cp.scan_interval = cpu_to_le16(hdev->le_scan_interval);
+ cp.scan_window = cp.scan_interval;
+
+ bacpy(&cp.peer_addr, &conn->dst);
+ cp.peer_addr_type = conn->dst_type;
+ cp.own_address_type = own_addr_type;
+ cp.conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
+ cp.conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
+ cp.conn_latency = cpu_to_le16(conn->le_conn_latency);
+ cp.supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
+ cp.min_ce_len = cpu_to_le16(0x0000);
+ cp.max_ce_len = cpu_to_le16(0x0000);
+
+ hci_req_add(req, HCI_OP_LE_CREATE_CONN, sizeof(cp), &cp);
+ }

conn->state = BT_CONNECT;
clear_bit(HCI_CONN_SCANNING, &conn->flags);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 8a0954b..cdc9616 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -711,6 +711,12 @@ static int hci_init3_req(struct hci_request *req, unsigned long opt)
if (use_ext_scan(hdev))
events[1] |= 0x10; /* LE Extended adv report */

+ /* If the controller supports the LE Extended connection
+ * enable the corresponding event.
+ */
+ if (use_ext_conn(hdev))
+ events[1] |= 0x02; /* LE Enhanced conn complete */
+
hci_req_add(req, HCI_OP_LE_SET_EVENT_MASK, sizeof(events),
events);

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index f651feb..4d757a5 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -2004,6 +2004,31 @@ static void hci_cs_le_create_conn(struct hci_dev *hdev, u8 status)
hci_dev_unlock(hdev);
}

+static void hci_cs_le_ext_create_conn(struct hci_dev *hdev, u8 status)
+{
+ struct hci_cp_le_ext_create_conn *cp;
+
+ BT_DBG("%s status 0x%2.2x", hdev->name, status);
+
+ /* All connection failure handling is taken care of by the
+ * hci_le_conn_failed function which is triggered by the HCI
+ * request completion callbacks used for connecting.
+ */
+ if (status)
+ return;
+
+ cp = hci_sent_cmd_data(hdev, HCI_OP_LE_EXT_CREATE_CONN);
+ if (!cp)
+ return;
+
+ hci_dev_lock(hdev);
+
+ cs_le_create_conn(hdev, &cp->peer_addr, cp->peer_addr_type,
+ cp->own_addr_type, cp->filter_policy);
+
+ hci_dev_unlock(hdev);
+}
+
static void hci_cs_le_read_remote_features(struct hci_dev *hdev, u8 status)
{
struct hci_cp_le_read_remote_features *cp;
@@ -3198,6 +3223,10 @@ static void hci_cmd_status_evt(struct hci_dev *hdev, struct sk_buff *skb,
hci_cs_le_start_enc(hdev, ev->status);
break;

+ case HCI_OP_LE_EXT_CREATE_CONN:
+ hci_cs_le_ext_create_conn(hdev, ev->status);
+ break;
+
default:
BT_DBG("%s opcode 0x%4.4x", hdev->name, *opcode);
break;
@@ -4698,6 +4727,20 @@ static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
le16_to_cpu(ev->supervision_timeout));
}

+static void hci_le_enh_conn_complete_evt(struct hci_dev *hdev,
+ struct sk_buff *skb)
+{
+ struct hci_ev_le_enh_conn_complete *ev = (void *) skb->data;
+
+ BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
+
+ le_conn_complete_evt(hdev, ev->status, &ev->bdaddr, ev->bdaddr_type,
+ ev->role, le16_to_cpu(ev->handle),
+ le16_to_cpu(ev->interval),
+ le16_to_cpu(ev->latency),
+ le16_to_cpu(ev->supervision_timeout));
+}
+
static void hci_le_conn_update_complete_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
@@ -5306,6 +5349,10 @@ static void hci_le_meta_evt(struct hci_dev *hdev, struct sk_buff *skb)
hci_le_ext_adv_report_evt(hdev, skb);
break;

+ case HCI_EV_LE_ENHANCED_CONN_COMPLETE:
+ hci_le_enh_conn_complete_evt(hdev, skb);
+ break;
+
default:
break;
}
--
2.7.4


2018-03-05 11:28:02

by Jaganath K

[permalink] [raw]
Subject: [PATCH v1 04/11] Bluetooth: Introduce helpers for le conn status and complete

This is done so that the helpers can be used for extended conn
implementation which will be done in subsequent patch.

Signed-off-by: Jaganath Kanakkassery <[email protected]>
---
net/bluetooth/hci_event.c | 110 +++++++++++++++++++++++++++-------------------
1 file changed, 65 insertions(+), 45 deletions(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 031a812..f651feb 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1944,55 +1944,63 @@ static void hci_cs_disconnect(struct hci_dev *hdev, u8 status)
hci_dev_unlock(hdev);
}

-static void hci_cs_le_create_conn(struct hci_dev *hdev, u8 status)
+static void cs_le_create_conn(struct hci_dev *hdev, bdaddr_t *peer_addr,
+ u8 peer_addr_type, u8 own_address_type,
+ u8 filter_policy)
{
- struct hci_cp_le_create_conn *cp;
struct hci_conn *conn;

- BT_DBG("%s status 0x%2.2x", hdev->name, status);
-
- /* All connection failure handling is taken care of by the
- * hci_le_conn_failed function which is triggered by the HCI
- * request completion callbacks used for connecting.
- */
- if (status)
- return;
-
- cp = hci_sent_cmd_data(hdev, HCI_OP_LE_CREATE_CONN);
- if (!cp)
- return;
-
- hci_dev_lock(hdev);
-
- conn = hci_conn_hash_lookup_le(hdev, &cp->peer_addr,
- cp->peer_addr_type);
+ conn = hci_conn_hash_lookup_le(hdev, peer_addr,
+ peer_addr_type);
if (!conn)
- goto unlock;
+ return;

/* Store the initiator and responder address information which
* is needed for SMP. These values will not change during the
* lifetime of the connection.
*/
- conn->init_addr_type = cp->own_address_type;
- if (cp->own_address_type == ADDR_LE_DEV_RANDOM)
+ conn->init_addr_type = own_address_type;
+ if (own_address_type == ADDR_LE_DEV_RANDOM)
bacpy(&conn->init_addr, &hdev->random_addr);
else
bacpy(&conn->init_addr, &hdev->bdaddr);

- conn->resp_addr_type = cp->peer_addr_type;
- bacpy(&conn->resp_addr, &cp->peer_addr);
+ conn->resp_addr_type = peer_addr_type;
+ bacpy(&conn->resp_addr, peer_addr);

/* We don't want the connection attempt to stick around
* indefinitely since LE doesn't have a page timeout concept
* like BR/EDR. Set a timer for any connection that doesn't use
* the white list for connecting.
*/
- if (cp->filter_policy == HCI_LE_USE_PEER_ADDR)
+ if (filter_policy == HCI_LE_USE_PEER_ADDR)
queue_delayed_work(conn->hdev->workqueue,
&conn->le_conn_timeout,
conn->conn_timeout);
+}
+
+static void hci_cs_le_create_conn(struct hci_dev *hdev, u8 status)
+{
+ struct hci_cp_le_create_conn *cp;
+
+ BT_DBG("%s status 0x%2.2x", hdev->name, status);
+
+ /* All connection failure handling is taken care of by the
+ * hci_le_conn_failed function which is triggered by the HCI
+ * request completion callbacks used for connecting.
+ */
+ if (status)
+ return;
+
+ cp = hci_sent_cmd_data(hdev, HCI_OP_LE_CREATE_CONN);
+ if (!cp)
+ return;
+
+ hci_dev_lock(hdev);
+
+ cs_le_create_conn(hdev, &cp->peer_addr, cp->peer_addr_type,
+ cp->own_address_type, cp->filter_policy);

-unlock:
hci_dev_unlock(hdev);
}

@@ -4516,16 +4524,15 @@ static void hci_disconn_phylink_complete_evt(struct hci_dev *hdev,
}
#endif

-static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
+static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
+ bdaddr_t *bdaddr, u8 bdaddr_type, u8 role, u16 handle,
+ u16 interval, u16 latency, u16 supervision_timeout)
{
- struct hci_ev_le_conn_complete *ev = (void *) skb->data;
struct hci_conn_params *params;
struct hci_conn *conn;
struct smp_irk *irk;
u8 addr_type;

- BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
-
hci_dev_lock(hdev);

/* All controllers implicitly stop advertising in the event of a
@@ -4535,13 +4542,13 @@ static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)

conn = hci_lookup_le_connect(hdev);
if (!conn) {
- conn = hci_conn_add(hdev, LE_LINK, &ev->bdaddr, ev->role);
+ conn = hci_conn_add(hdev, LE_LINK, bdaddr, role);
if (!conn) {
bt_dev_err(hdev, "no memory for new connection");
goto unlock;
}

- conn->dst_type = ev->bdaddr_type;
+ conn->dst_type = bdaddr_type;

/* If we didn't have a hci_conn object previously
* but we're in master role this must be something
@@ -4552,8 +4559,8 @@ static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
* initiator address based on the HCI_PRIVACY flag.
*/
if (conn->out) {
- conn->resp_addr_type = ev->bdaddr_type;
- bacpy(&conn->resp_addr, &ev->bdaddr);
+ conn->resp_addr_type = bdaddr_type;
+ bacpy(&conn->resp_addr, bdaddr);
if (hci_dev_test_flag(hdev, HCI_PRIVACY)) {
conn->init_addr_type = ADDR_LE_DEV_RANDOM;
bacpy(&conn->init_addr, &hdev->rpa);
@@ -4577,8 +4584,8 @@ static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
else
bacpy(&conn->resp_addr, &hdev->bdaddr);

- conn->init_addr_type = ev->bdaddr_type;
- bacpy(&conn->init_addr, &ev->bdaddr);
+ conn->init_addr_type = bdaddr_type;
+ bacpy(&conn->init_addr, bdaddr);

/* For incoming connections, set the default minimum
* and maximum connection interval. They will be used
@@ -4604,8 +4611,8 @@ static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
conn->dst_type = irk->addr_type;
}

- if (ev->status) {
- hci_le_conn_failed(conn, ev->status);
+ if (status) {
+ hci_le_conn_failed(conn, status);
goto unlock;
}

@@ -4624,17 +4631,17 @@ static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
mgmt_device_connected(hdev, conn, 0, NULL, 0);

conn->sec_level = BT_SECURITY_LOW;
- conn->handle = __le16_to_cpu(ev->handle);
+ conn->handle = handle;
conn->state = BT_CONFIG;

- conn->le_conn_interval = le16_to_cpu(ev->interval);
- conn->le_conn_latency = le16_to_cpu(ev->latency);
- conn->le_supv_timeout = le16_to_cpu(ev->supervision_timeout);
+ conn->le_conn_interval = interval;
+ conn->le_conn_latency = latency;
+ conn->le_supv_timeout = supervision_timeout;

hci_debugfs_create_conn(conn);
hci_conn_add_sysfs(conn);

- if (!ev->status) {
+ if (!status) {
/* The remote features procedure is defined for master
* role only. So only in case of an initiated connection
* request the remote features.
@@ -4656,10 +4663,10 @@ static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
hci_conn_hold(conn);
} else {
conn->state = BT_CONNECTED;
- hci_connect_cfm(conn, ev->status);
+ hci_connect_cfm(conn, status);
}
} else {
- hci_connect_cfm(conn, ev->status);
+ hci_connect_cfm(conn, status);
}

params = hci_pend_le_action_lookup(&hdev->pend_le_conns, &conn->dst,
@@ -4678,6 +4685,19 @@ static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
hci_dev_unlock(hdev);
}

+static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_ev_le_conn_complete *ev = (void *) skb->data;
+
+ BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
+
+ le_conn_complete_evt(hdev, ev->status, &ev->bdaddr, ev->bdaddr_type,
+ ev->role, le16_to_cpu(ev->handle),
+ le16_to_cpu(ev->interval),
+ le16_to_cpu(ev->latency),
+ le16_to_cpu(ev->supervision_timeout));
+}
+
static void hci_le_conn_update_complete_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
--
2.7.4


2018-03-05 11:28:01

by Jaganath K

[permalink] [raw]
Subject: [PATCH v1 03/11] Bluetooth: Process extended ADV report event

This patch enables Extended ADV report event if extended scanning
is supported in the controller and process the same.

The new features are not handled and for now its as good as
legacy ADV report.

> HCI Event: LE Meta Event (0x3e) plen 53
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x0013
Props: 0x0013
Connectable
Scannable
Use legacy advertising PDUs
Data status: Complete
Legacy PDU Type: ADV_IND (0x0013)
Address type: Random (0x01)
Address: DB:7E:2E:1A:85:E8 (Static)
Primary PHY: LE 1M
Secondary PHY: LE 1M
SID: 0x00
TX power: 0 dBm
RSSI: -90 dBm (0xa6)
Periodic advertising invteral: 0.00 msec (0x0000)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
Data length: 0x1b
0f 09 44 65 73 69 67 6e 65 72 20 4d 6f 75 73 65 ..Designer Mouse
03 19 c2 03 02 01 05 03 03 12 18 ...........

Signed-off-by: Jaganath Kanakkassery <[email protected]>
---
include/net/bluetooth/hci.h | 26 +++++++++++++++++++++++
net/bluetooth/hci_core.c | 7 ++++++
net/bluetooth/hci_event.c | 52 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 85 insertions(+)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 0e73acd..34eaaf9 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1917,6 +1917,15 @@ struct hci_ev_le_conn_complete {
#define LE_ADV_SCAN_IND 0x02
#define LE_ADV_NONCONN_IND 0x03
#define LE_ADV_SCAN_RSP 0x04
+#define LE_ADV_INVALID 0x05
+
+/* Legacy event types in extended adv report */
+#define LE_LEGACY_ADV_IND 0x0013
+#define LE_LEGACY_ADV_DIRECT_IND 0x0015
+#define LE_LEGACY_ADV_SCAN_IND 0x0012
+#define LE_LEGACY_NONCONN_IND 0x0010
+#define LE_LEGACY_SCAN_RSP_ADV 0x001b
+#define LE_LEGACY_SCAN_RSP_ADV_SCAN 0x001a

#define ADDR_LE_DEV_PUBLIC 0x00
#define ADDR_LE_DEV_RANDOM 0x01
@@ -1981,6 +1990,23 @@ struct hci_ev_le_direct_adv_info {
__s8 rssi;
} __packed;

+#define HCI_EV_LE_EXT_ADV_REPORT 0x0d
+struct hci_ev_le_ext_adv_report {
+ __le16 evt_type;
+ __u8 bdaddr_type;
+ bdaddr_t bdaddr;
+ __u8 primary_phy;
+ __u8 secondary_phy;
+ __u8 sid;
+ __u8 tx_power;
+ __s8 rssi;
+ __le16 interval;
+ __u8 direct_addr_type;
+ bdaddr_t direct_addr;
+ __u8 length;
+ __u8 data[0];
+} __packed;
+
/* Internal events generated by Bluetooth stack */
#define HCI_EV_STACK_INTERNAL 0xfd
struct hci_ev_stack_internal {
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 40d260f..8a0954b 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -704,6 +704,13 @@ static int hci_init3_req(struct hci_request *req, unsigned long opt)
if (hdev->commands[35] & (0x20 | 0x40))
events[1] |= 0x08; /* LE PHY Update Complete */

+ /* If the controller supports LE Set Extended Scan param and
+ * LE Set Extended Scan enable commands, enable the
+ * corresponding event.
+ */
+ if (use_ext_scan(hdev))
+ events[1] |= 0x10; /* LE Extended adv report */
+
hci_req_add(req, HCI_OP_LE_SET_EVENT_MASK, sizeof(events),
events);

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index e88bf51..031a812 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5002,6 +5002,54 @@ static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
hci_dev_unlock(hdev);
}

+static u8 convert_legacy_evt_type(u16 evt_type)
+{
+ switch (evt_type) {
+ case LE_LEGACY_ADV_IND:
+ return LE_ADV_IND;
+ case LE_LEGACY_ADV_DIRECT_IND:
+ return LE_ADV_DIRECT_IND;
+ case LE_LEGACY_ADV_SCAN_IND:
+ return LE_ADV_SCAN_IND;
+ case LE_LEGACY_NONCONN_IND:
+ return LE_ADV_NONCONN_IND;
+ case LE_LEGACY_SCAN_RSP_ADV:
+ case LE_LEGACY_SCAN_RSP_ADV_SCAN:
+ return LE_ADV_SCAN_RSP;
+ }
+
+ BT_ERR_RATELIMITED("Unknown advertising packet type: 0x%02x",
+ evt_type);
+
+ return LE_ADV_INVALID;
+}
+
+static void hci_le_ext_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ u8 num_reports = skb->data[0];
+ void *ptr = &skb->data[1];
+
+ hci_dev_lock(hdev);
+
+ while (num_reports--) {
+ struct hci_ev_le_ext_adv_report *ev = ptr;
+ u8 legacy_evt_type;
+ u16 evt_type;
+
+ evt_type = __le16_to_cpu(ev->evt_type);
+ legacy_evt_type = convert_legacy_evt_type(evt_type);
+ if (legacy_evt_type != LE_ADV_INVALID) {
+ process_adv_report(hdev, legacy_evt_type, &ev->bdaddr,
+ ev->bdaddr_type, NULL, 0, ev->rssi,
+ ev->data, ev->length);
+ }
+
+ ptr += sizeof(*ev) + ev->length + 1;
+ }
+
+ hci_dev_unlock(hdev);
+}
+
static void hci_le_remote_feat_complete_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
@@ -5234,6 +5282,10 @@ static void hci_le_meta_evt(struct hci_dev *hdev, struct sk_buff *skb)
hci_le_direct_adv_report_evt(hdev, skb);
break;

+ case HCI_EV_LE_EXT_ADV_REPORT:
+ hci_le_ext_adv_report_evt(hdev, skb);
+ break;
+
default:
break;
}
--
2.7.4


2018-03-05 11:28:00

by Jaganath K

[permalink] [raw]
Subject: [PATCH v1 02/11] Bluetooth: Use extended scanning if controller supports

This implements Set extended scan param and set extended scan enable
commands and use it for start LE scan based on controller support.

The new features added in these commands are setting of new PHY for
scanning and setting of scan duration. Both features are disabled
for now, meaning only 1M PHY is set and scan duration is set to 0
which means that scanning will be done untill scan disable is called.

< HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 8
Own address type: Random (0x01)
Filter policy: Accept all advertisement (0x00)
PHYs: 0x01
Entry 0: LE 1M
Type: Active (0x01)
Interval: 11.250 msec (0x0012)
Window: 11.250 msec (0x0012)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Enable (0x08|0x0042) ncmd 2
Status: Success (0x00)

Signed-off-by: Jaganath Kanakkassery <[email protected]>
---
include/net/bluetooth/hci.h | 24 +++++++++
include/net/bluetooth/hci_core.h | 4 ++
net/bluetooth/hci_event.c | 51 ++++++++++++++++++
net/bluetooth/hci_request.c | 110 ++++++++++++++++++++++++++++++---------
4 files changed, 164 insertions(+), 25 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 1668211..0e73acd 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1506,6 +1506,30 @@ struct hci_cp_le_set_default_phy {
__u8 rx_phys;
} __packed;

+#define HCI_OP_LE_SET_EXT_SCAN_PARAMS 0x2041
+struct hci_cp_le_set_ext_scan_params {
+ __u8 own_addr_type;
+ __u8 filter_policy;
+ __u8 scanning_phys;
+ __u8 data[0];
+} __packed;
+
+#define LE_SCAN_PHY_1M 0x01
+
+struct hci_cp_le_scan_phy_params {
+ __u8 type;
+ __le16 interval;
+ __le16 window;
+} __packed;
+
+#define HCI_OP_LE_SET_EXT_SCAN_ENABLE 0x2042
+struct hci_cp_le_set_ext_scan_enable {
+ __u8 enable;
+ __u8 filter_dup;
+ __le16 duration;
+ __le16 period;
+} __packed;
+
/* ---- HCI Events ---- */
#define HCI_EV_INQUIRY_COMPLETE 0x01

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 95ccc1e..4b32601 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1156,6 +1156,10 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
#define bredr_sc_enabled(dev) (lmp_sc_capable(dev) && \
hci_dev_test_flag(dev, HCI_SC_ENABLED))

+/* Use ext scanning if set ext scan param and ext scan enable is supported */
+#define use_ext_scan(dev) (((dev)->commands[37] & 0x20) && \
+ ((dev)->commands[37] & 0x40))
+
/* ----- HCI protocols ----- */
#define HCI_PROTO_DEFER 0x01

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index e034ced..e88bf51 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1097,6 +1097,31 @@ static void hci_cc_le_set_scan_param(struct hci_dev *hdev, struct sk_buff *skb)
hci_dev_unlock(hdev);
}

+static void hci_cc_le_set_ext_scan_param(struct hci_dev *hdev,
+ struct sk_buff *skb)
+{
+ struct hci_cp_le_set_ext_scan_params *cp;
+ __u8 status = *((__u8 *) skb->data);
+ struct hci_cp_le_scan_phy_params *phy_param;
+
+ BT_DBG("%s status 0x%2.2x", hdev->name, status);
+
+ if (status)
+ return;
+
+ cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_EXT_SCAN_PARAMS);
+ if (!cp)
+ return;
+
+ phy_param = (void *)cp->data;
+
+ hci_dev_lock(hdev);
+
+ hdev->le_scan_type = phy_param->type;
+
+ hci_dev_unlock(hdev);
+}
+
static bool has_pending_adv_report(struct hci_dev *hdev)
{
struct discovery_state *d = &hdev->discovery;
@@ -1201,6 +1226,24 @@ static void hci_cc_le_set_scan_enable(struct hci_dev *hdev,
le_set_scan_enable_complete(hdev, cp->enable);
}

+static void hci_cc_le_set_ext_scan_enable(struct hci_dev *hdev,
+ struct sk_buff *skb)
+{
+ struct hci_cp_le_set_ext_scan_enable *cp;
+ __u8 status = *((__u8 *) skb->data);
+
+ BT_DBG("%s status 0x%2.2x", hdev->name, status);
+
+ if (status)
+ return;
+
+ cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_EXT_SCAN_ENABLE);
+ if (!cp)
+ return;
+
+ le_set_scan_enable_complete(hdev, cp->enable);
+}
+
static void hci_cc_le_read_white_list_size(struct hci_dev *hdev,
struct sk_buff *skb)
{
@@ -3044,6 +3087,14 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb,
hci_cc_write_ssp_debug_mode(hdev, skb);
break;

+ case HCI_OP_LE_SET_EXT_SCAN_PARAMS:
+ hci_cc_le_set_ext_scan_param(hdev, skb);
+ break;
+
+ case HCI_OP_LE_SET_EXT_SCAN_ENABLE:
+ hci_cc_le_set_ext_scan_enable(hdev, skb);
+ break;
+
default:
BT_DBG("%s opcode 0x%4.4x", hdev->name, *opcode);
break;
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index d9d07c4..f3def2e 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -663,11 +663,22 @@ void __hci_req_update_eir(struct hci_request *req)

void hci_req_add_le_scan_disable(struct hci_request *req)
{
- struct hci_cp_le_set_scan_enable cp;
+ struct hci_dev *hdev = req->hdev;

- memset(&cp, 0, sizeof(cp));
- cp.enable = LE_SCAN_DISABLE;
- hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(cp), &cp);
+ if (use_ext_scan(hdev)) {
+ struct hci_cp_le_set_ext_scan_enable cp;
+
+ memset(&cp, 0, sizeof(cp));
+ cp.enable = LE_SCAN_DISABLE;
+ hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_ENABLE, sizeof(cp),
+ &cp);
+ } else {
+ struct hci_cp_le_set_scan_enable cp;
+
+ memset(&cp, 0, sizeof(cp));
+ cp.enable = LE_SCAN_DISABLE;
+ hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(cp), &cp);
+ }
}

static void add_to_white_list(struct hci_request *req,
@@ -786,23 +797,60 @@ static bool scan_use_rpa(struct hci_dev *hdev)
static void hci_req_start_scan(struct hci_request *req, u8 type, u16 interval,
u16 window, u8 own_addr_type, u8 filter_policy)
{
- struct hci_cp_le_set_scan_param param_cp;
- struct hci_cp_le_set_scan_enable enable_cp;
-
- memset(&param_cp, 0, sizeof(param_cp));
- param_cp.type = type;
- param_cp.interval = cpu_to_le16(interval);
- param_cp.window = cpu_to_le16(window);
- param_cp.own_address_type = own_addr_type;
- param_cp.filter_policy = filter_policy;
- hci_req_add(req, HCI_OP_LE_SET_SCAN_PARAM, sizeof(param_cp),
- &param_cp);
+ struct hci_dev *hdev = req->hdev;

- memset(&enable_cp, 0, sizeof(enable_cp));
- enable_cp.enable = LE_SCAN_ENABLE;
- enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
- hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(enable_cp),
- &enable_cp);
+ /* Use ext scanning if set ext scan param and ext scan enable is
+ * supported
+ */
+ if (use_ext_scan(hdev)) {
+ struct hci_cp_le_set_ext_scan_params *ext_param_cp;
+ struct hci_cp_le_set_ext_scan_enable ext_enable_cp;
+ struct hci_cp_le_scan_phy_params *phy_params;
+ /* Ony single PHY (1M) is supported as of now */
+ u8 data[sizeof(*ext_param_cp) + sizeof(*phy_params) * 1];
+
+ ext_param_cp = (void *)data;
+ phy_params = (void *)ext_param_cp->data;
+
+ memset(ext_param_cp, 0, sizeof(*ext_param_cp));
+ ext_param_cp->own_addr_type = own_addr_type;
+ ext_param_cp->filter_policy = filter_policy;
+ ext_param_cp->scanning_phys = LE_SCAN_PHY_1M;
+
+ memset(phy_params, 0, sizeof(*phy_params));
+ phy_params->type = type;
+ phy_params->interval = cpu_to_le16(interval);
+ phy_params->window = cpu_to_le16(window);
+
+ hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_PARAMS,
+ sizeof(*ext_param_cp) + sizeof(*phy_params),
+ ext_param_cp);
+
+ memset(&ext_enable_cp, 0, sizeof(ext_enable_cp));
+ ext_enable_cp.enable = LE_SCAN_ENABLE;
+ ext_enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
+
+ hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_ENABLE,
+ sizeof(ext_enable_cp), &ext_enable_cp);
+ } else {
+ struct hci_cp_le_set_scan_param param_cp;
+ struct hci_cp_le_set_scan_enable enable_cp;
+
+ memset(&param_cp, 0, sizeof(param_cp));
+ param_cp.type = type;
+ param_cp.interval = cpu_to_le16(interval);
+ param_cp.window = cpu_to_le16(window);
+ param_cp.own_address_type = own_addr_type;
+ param_cp.filter_policy = filter_policy;
+ hci_req_add(req, HCI_OP_LE_SET_SCAN_PARAM, sizeof(param_cp),
+ &param_cp);
+
+ memset(&enable_cp, 0, sizeof(enable_cp));
+ enable_cp.enable = LE_SCAN_ENABLE;
+ enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
+ hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(enable_cp),
+ &enable_cp);
+ }
}

void hci_req_add_le_passive_scan(struct hci_request *req)
@@ -1964,7 +2012,6 @@ static void le_scan_disable_work(struct work_struct *work)
static int le_scan_restart(struct hci_request *req, unsigned long opt)
{
struct hci_dev *hdev = req->hdev;
- struct hci_cp_le_set_scan_enable cp;

/* If controller is not scanning we are done. */
if (!hci_dev_test_flag(hdev, HCI_LE_SCAN))
@@ -1972,10 +2019,23 @@ static int le_scan_restart(struct hci_request *req, unsigned long opt)

hci_req_add_le_scan_disable(req);

- memset(&cp, 0, sizeof(cp));
- cp.enable = LE_SCAN_ENABLE;
- cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
- hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(cp), &cp);
+ if (use_ext_scan(hdev)) {
+ struct hci_cp_le_set_ext_scan_enable ext_enable_cp;
+
+ memset(&ext_enable_cp, 0, sizeof(ext_enable_cp));
+ ext_enable_cp.enable = LE_SCAN_ENABLE;
+ ext_enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
+
+ hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_ENABLE,
+ sizeof(ext_enable_cp), &ext_enable_cp);
+ } else {
+ struct hci_cp_le_set_scan_enable cp;
+
+ memset(&cp, 0, sizeof(cp));
+ cp.enable = LE_SCAN_ENABLE;
+ cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
+ hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(cp), &cp);
+ }

return 0;
}
--
2.7.4


2018-03-05 11:27:59

by Jaganath K

[permalink] [raw]
Subject: [PATCH v1 01/11] Bluetooth: Introduce helpers for LE set scan start and complete

Introduce a helper hci_req_start_scan() which starts an LE
scan and call it from passive_Scan() and active_scan().
There is not functionality change in this patch.

This is basically done to enable extended scanning if the
controller supports which will be done in the subsequent
patch

Signed-off-by: Jaganath Kanakkassery <[email protected]>
---
net/bluetooth/hci_event.c | 37 ++++++++++++++++-------------
net/bluetooth/hci_request.c | 58 +++++++++++++++++++--------------------------
2 files changed, 46 insertions(+), 49 deletions(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index cd3bbb7..e034ced 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1126,24 +1126,11 @@ static void store_pending_adv_report(struct hci_dev *hdev, bdaddr_t *bdaddr,
d->last_adv_data_len = len;
}

-static void hci_cc_le_set_scan_enable(struct hci_dev *hdev,
- struct sk_buff *skb)
+static void le_set_scan_enable_complete(struct hci_dev *hdev, u8 enable)
{
- struct hci_cp_le_set_scan_enable *cp;
- __u8 status = *((__u8 *) skb->data);
-
- BT_DBG("%s status 0x%2.2x", hdev->name, status);
-
- if (status)
- return;
-
- cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_SCAN_ENABLE);
- if (!cp)
- return;
-
hci_dev_lock(hdev);

- switch (cp->enable) {
+ switch (enable) {
case LE_SCAN_ENABLE:
hci_dev_set_flag(hdev, HCI_LE_SCAN);
if (hdev->le_scan_type == LE_SCAN_ACTIVE)
@@ -1189,13 +1176,31 @@ static void hci_cc_le_set_scan_enable(struct hci_dev *hdev,

default:
bt_dev_err(hdev, "use of reserved LE_Scan_Enable param %d",
- cp->enable);
+ enable);
break;
}

hci_dev_unlock(hdev);
}

+static void hci_cc_le_set_scan_enable(struct hci_dev *hdev,
+ struct sk_buff *skb)
+{
+ struct hci_cp_le_set_scan_enable *cp;
+ __u8 status = *((__u8 *) skb->data);
+
+ BT_DBG("%s status 0x%2.2x", hdev->name, status);
+
+ if (status)
+ return;
+
+ cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_SCAN_ENABLE);
+ if (!cp)
+ return;
+
+ le_set_scan_enable_complete(hdev, cp->enable);
+}
+
static void hci_cc_le_read_white_list_size(struct hci_dev *hdev,
struct sk_buff *skb)
{
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index 66c0781..d9d07c4 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -783,10 +783,30 @@ static bool scan_use_rpa(struct hci_dev *hdev)
return hci_dev_test_flag(hdev, HCI_PRIVACY);
}

-void hci_req_add_le_passive_scan(struct hci_request *req)
+static void hci_req_start_scan(struct hci_request *req, u8 type, u16 interval,
+ u16 window, u8 own_addr_type, u8 filter_policy)
{
struct hci_cp_le_set_scan_param param_cp;
struct hci_cp_le_set_scan_enable enable_cp;
+
+ memset(&param_cp, 0, sizeof(param_cp));
+ param_cp.type = type;
+ param_cp.interval = cpu_to_le16(interval);
+ param_cp.window = cpu_to_le16(window);
+ param_cp.own_address_type = own_addr_type;
+ param_cp.filter_policy = filter_policy;
+ hci_req_add(req, HCI_OP_LE_SET_SCAN_PARAM, sizeof(param_cp),
+ &param_cp);
+
+ memset(&enable_cp, 0, sizeof(enable_cp));
+ enable_cp.enable = LE_SCAN_ENABLE;
+ enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
+ hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(enable_cp),
+ &enable_cp);
+}
+
+void hci_req_add_le_passive_scan(struct hci_request *req)
+{
struct hci_dev *hdev = req->hdev;
u8 own_addr_type;
u8 filter_policy;
@@ -820,20 +840,8 @@ void hci_req_add_le_passive_scan(struct hci_request *req)
(hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY))
filter_policy |= 0x02;

- memset(&param_cp, 0, sizeof(param_cp));
- param_cp.type = LE_SCAN_PASSIVE;
- param_cp.interval = cpu_to_le16(hdev->le_scan_interval);
- param_cp.window = cpu_to_le16(hdev->le_scan_window);
- param_cp.own_address_type = own_addr_type;
- param_cp.filter_policy = filter_policy;
- hci_req_add(req, HCI_OP_LE_SET_SCAN_PARAM, sizeof(param_cp),
- &param_cp);
-
- memset(&enable_cp, 0, sizeof(enable_cp));
- enable_cp.enable = LE_SCAN_ENABLE;
- enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
- hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(enable_cp),
- &enable_cp);
+ hci_req_start_scan(req, LE_SCAN_PASSIVE, hdev->le_scan_interval,
+ hdev->le_scan_window, own_addr_type, filter_policy);
}

static u8 get_cur_adv_instance_scan_rsp_len(struct hci_dev *hdev)
@@ -2026,8 +2034,6 @@ static int active_scan(struct hci_request *req, unsigned long opt)
{
uint16_t interval = opt;
struct hci_dev *hdev = req->hdev;
- struct hci_cp_le_set_scan_param param_cp;
- struct hci_cp_le_set_scan_enable enable_cp;
u8 own_addr_type;
int err;

@@ -2066,22 +2072,8 @@ static int active_scan(struct hci_request *req, unsigned long opt)
if (err < 0)
own_addr_type = ADDR_LE_DEV_PUBLIC;

- memset(&param_cp, 0, sizeof(param_cp));
- param_cp.type = LE_SCAN_ACTIVE;
- param_cp.interval = cpu_to_le16(interval);
- param_cp.window = cpu_to_le16(DISCOV_LE_SCAN_WIN);
- param_cp.own_address_type = own_addr_type;
-
- hci_req_add(req, HCI_OP_LE_SET_SCAN_PARAM, sizeof(param_cp),
- &param_cp);
-
- memset(&enable_cp, 0, sizeof(enable_cp));
- enable_cp.enable = LE_SCAN_ENABLE;
- enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
-
- hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(enable_cp),
- &enable_cp);
-
+ hci_req_start_scan(req, LE_SCAN_ACTIVE, interval, DISCOV_LE_SCAN_WIN,
+ own_addr_type, 0);
return 0;
}

--
2.7.4