Use macro for image type instead of using hard code number.
Signed-off-by: Kiran K <[email protected]>
---
drivers/bluetooth/btintel.c | 12 ++++++------
drivers/bluetooth/btintel.h | 3 +++
2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 6ba7f5d1b837..2abe75f06e9c 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -489,7 +489,7 @@ static int btintel_version_info_tlv(struct hci_dev *hdev,
}
switch (version->img_type) {
- case 0x01:
+ case BTINTEL_IMG_BOOTLOADER:
variant = "Bootloader";
/* It is required that every single firmware fragment is acknowledged
* with a command complete event. If the boot parameters indicate
@@ -521,7 +521,7 @@ static int btintel_version_info_tlv(struct hci_dev *hdev,
version->min_fw_build_nn, version->min_fw_build_cw,
2000 + version->min_fw_build_yy);
break;
- case 0x03:
+ case BTINTEL_IMG_OP:
variant = "Firmware";
break;
default:
@@ -535,7 +535,7 @@ static int btintel_version_info_tlv(struct hci_dev *hdev,
bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u", variant,
2000 + (version->timestamp >> 8), version->timestamp & 0xff,
version->build_type, version->build_num);
- if (version->img_type == 0x03)
+ if (version->img_type == BTINTEL_IMG_OP)
bt_dev_info(hdev, "Firmware SHA1: 0x%8.8x", version->git_sha1);
return 0;
@@ -1172,7 +1172,7 @@ static int btintel_download_fw_tlv(struct hci_dev *hdev,
* If the firmware version has changed that means it needs to be reset
* to bootloader when operational so the new firmware can be loaded.
*/
- if (ver->img_type == 0x03)
+ if (ver->img_type == BTINTEL_IMG_OP)
return -EINVAL;
/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
@@ -2230,7 +2230,7 @@ static int btintel_prepare_fw_download_tlv(struct hci_dev *hdev,
* It is not possible to use the Secure Boot Parameters in this
* case since that command is only available in bootloader mode.
*/
- if (ver->img_type == 0x03) {
+ if (ver->img_type == BTINTEL_IMG_OP) {
btintel_clear_flag(hdev, INTEL_BOOTLOADER);
btintel_check_bdaddr(hdev);
} else {
@@ -2600,7 +2600,7 @@ static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,
return err;
/* check if controller is already having an operational firmware */
- if (ver->img_type == 0x03)
+ if (ver->img_type == BTINTEL_IMG_OP)
goto finish;
err = btintel_boot(hdev, boot_param);
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index d19fcdb9ff0b..d961a33bfbd6 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -51,6 +51,9 @@ struct intel_tlv {
u8 val[];
} __packed;
+#define BTINTEL_IMG_BOOTLOADER 0x01 /* Bootloader image */
+#define BTINTEL_IMG_OP 0x03 /* Operational image */
+
struct intel_version_tlv {
u32 cnvi_top;
u32 cnvr_top;
--
2.34.1
Some variants of Intel controllers like BlazarI supports downloading of
Intermediate bootloader (IML) image. IML gives flexibility to fix issues as its
not possible to fix issue in Primary bootloader once flashed to ROM. This patch
adds the support to download IML before downloading operational firmware image.
dmesg logs:
[13.399003] Bluetooth: Core ver 2.22
[13.399006] Bluetooth: Starting self testing
[13.401194] Bluetooth: ECDH test passed in 2135 usecs
[13.421175] Bluetooth: SMP test passed in 597 usecs
[13.421184] Bluetooth: Finished self testing
[13.422919] Bluetooth: HCI device and connection manager initialized
[13.422923] Bluetooth: HCI socket layer initialized
[13.422925] Bluetooth: L2CAP socket layer initialized
[13.422930] Bluetooth: SCO socket layer initialized
[13.458065] Bluetooth: hci0: Device revision is 0
[13.458071] Bluetooth: hci0: Secure boot is disabled
[13.458072] Bluetooth: hci0: OTP lock is disabled
[13.458072] Bluetooth: hci0: API lock is enabled
[13.458073] Bluetooth: hci0: Debug lock is disabled
[13.458073] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[13.458075] Bluetooth: hci0: Bootloader timestamp 2022.46 buildtype 1 build 26590
[13.458324] Bluetooth: hci0: DSM reset method type: 0x00
[13.460678] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291-iml.sfi
[13.460684] Bluetooth: hci0: Boot Address: 0x30099000
[13.460685] Bluetooth: hci0: Firmware Version: 227-11.24
[13.562554] Bluetooth: hci0: Waiting for firmware download to complete
[13.563023] Bluetooth: hci0: Firmware loaded in 99941 usecs
[13.563057] Bluetooth: hci0: Waiting for device to boot
[13.565029] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[13.565148] Bluetooth: hci0: Device booted in 2064 usecs
[13.567065] Bluetooth: hci0: No device address configured
[13.569010] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291.sfi
[13.569061] Bluetooth: hci0: Boot Address: 0x10000800
[13.569062] Bluetooth: hci0: Firmware Version: 227-11.24
[13.788891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[13.788897] Bluetooth: BNEP filters: protocol multicast
[13.788902] Bluetooth: BNEP socket layer initialized
[15.435905] Bluetooth: hci0: Waiting for firmware download to complete
[15.436016] Bluetooth: hci0: Firmware loaded in 1823233 usecs
[15.436258] Bluetooth: hci0: Waiting for device to boot
[15.471140] Bluetooth: hci0: Device booted in 34277 usecs
[15.471201] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[15.471487] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0090-0291.ddc
[15.474353] Bluetooth: hci0: Applying Intel DDC parameters completed
[15.474486] Bluetooth: hci0: Found Intel DDC parameters: intel/bdaddress.cfg
[15.475299] Bluetooth: hci0: Applying Intel DDC parameters completed
[15.479381] Bluetooth: hci0: Firmware timestamp 2024.10 buildtype 3 build 58595
[15.479385] Bluetooth: hci0: Firmware SHA1: 0xb4f3cc46
[15.483243] Bluetooth: hci0: Fseq status: Success (0x00)
[15.483246] Bluetooth: hci0: Fseq executed: 00.00.00.00
[15.483247] Bluetooth: hci0: Fseq BT Top: 00.00.00.00
[15.578712] Bluetooth: MGMT ver 1.22
[15.822682] Bluetooth: RFCOMM TTY layer initialized
[15.822690] Bluetooth: RFCOMM socket layer initialized
[15.822695] Bluetooth: RFCOMM ver 1.11
Signed-off-by: Kiran K <[email protected]>
---
drivers/bluetooth/btintel.c | 38 ++++++++++++++++++++++++++++++++++++-
drivers/bluetooth/btintel.h | 3 +++
2 files changed, 40 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 2abe75f06e9c..f9e7f67e61d7 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -521,6 +521,9 @@ static int btintel_version_info_tlv(struct hci_dev *hdev,
version->min_fw_build_nn, version->min_fw_build_cw,
2000 + version->min_fw_build_yy);
break;
+ case BTINTEL_IMG_IML:
+ variant = "Intermediate loader";
+ break;
case BTINTEL_IMG_OP:
variant = "Firmware";
break;
@@ -2194,10 +2197,26 @@ static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver,
char *fw_name, size_t len,
const char *suffix)
{
+ const char *format;
/* The firmware file name for new generation controllers will be
* ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step>
*/
- snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s",
+ switch (ver->cnvi_top & 0xfff) {
+ /* Only Blazar product supports downloading of intermediate loader
+ * image
+ */
+ case CNVI_BLAZARI:
+ if (ver->img_type == BTINTEL_IMG_BOOTLOADER)
+ format = "intel/ibt-%04x-%04x-iml.%s";
+ else
+ format = "intel/ibt-%04x-%04x.%s";
+ break;
+ default:
+ format = "intel/ibt-%04x-%04x.%s";
+ break;
+ }
+
+ snprintf(fw_name, len, format,
INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvi_top),
INTEL_CNVX_TOP_STEP(ver->cnvi_top)),
INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvr_top),
@@ -2607,6 +2626,23 @@ static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,
if (err)
return err;
+ err = btintel_read_version_tlv(hdev, ver);
+ if (err)
+ return err;
+
+ /* If image type returned is BTINTEL_IMG_IML, then controller supports
+ * intermediae loader image
+ */
+ if (ver->img_type == BTINTEL_IMG_IML) {
+ err = btintel_prepare_fw_download_tlv(hdev, ver, &boot_param);
+ if (err)
+ return err;
+
+ err = btintel_boot(hdev, boot_param);
+ if (err)
+ return err;
+ }
+
btintel_clear_flag(hdev, INTEL_BOOTLOADER);
btintel_get_fw_name_tlv(ver, ddcname, sizeof(ddcname), "ddc");
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index d961a33bfbd6..2c560d0acaac 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -51,7 +51,10 @@ struct intel_tlv {
u8 val[];
} __packed;
+#define CNVI_BLAZARI 0x900
+
#define BTINTEL_IMG_BOOTLOADER 0x01 /* Bootloader image */
+#define BTINTEL_IMG_IML 0x02 /* Intermediate image */
#define BTINTEL_IMG_OP 0x03 /* Operational image */
struct intel_version_tlv {
--
2.34.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=834216
---Test result---
Test Summary:
CheckPatch FAIL 1.90 seconds
GitLint FAIL 0.82 seconds
SubjectPrefix PASS 0.21 seconds
BuildKernel PASS 26.85 seconds
CheckAllWarning PASS 30.21 seconds
CheckSparse PASS 35.73 seconds
CheckSmatch PASS 96.96 seconds
BuildKernel32 PASS 25.72 seconds
TestRunnerSetup PASS 485.01 seconds
TestRunner_l2cap-tester PASS 17.43 seconds
TestRunner_iso-tester PASS 29.07 seconds
TestRunner_bnep-tester PASS 4.47 seconds
TestRunner_mgmt-tester PASS 107.17 seconds
TestRunner_rfcomm-tester PASS 7.07 seconds
TestRunner_sco-tester PASS 14.63 seconds
TestRunner_ioctl-tester PASS 7.36 seconds
TestRunner_mesh-tester PASS 5.79 seconds
TestRunner_smp-tester PASS 6.49 seconds
TestRunner_userchan-tester PASS 4.66 seconds
IncrementalBuild PASS 31.11 seconds
Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
[v5,2/2] Bluetooth: btintel: Add support to download intermediate loader
WARNING: Prefer a maximum 75 chars per line (possible unwrapped commit description?)
#80:
Intermediate bootloader (IML) image. IML gives flexibility to fix issues as its
total: 0 errors, 1 warnings, 69 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/src/13588355.patch has style problems, please review.
NOTE: Ignored message types: UNKNOWN_COMMIT_ID
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: GitLint - FAIL
Desc: Run gitlint
Output:
[v5,2/2] Bluetooth: btintel: Add support to download intermediate loader
WARNING: I3 - ignore-body-lines: gitlint will be switching from using Python regex 'match' (match beginning) to 'search' (match anywhere) semantics. Please review your ignore-body-lines.regex option accordingly. To remove this warning, set general.regex-style-search=True. More details: https://jorisroovers.github.io/gitlint/configuration/#regex-style-search
24: B1 Line exceeds max length (81>80): "[13.458075] Bluetooth: hci0: Bootloader timestamp 2022.46 buildtype 1 build 26590"
---
Regards,
Linux Bluetooth
Hello:
This series was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <[email protected]>:
On Mon, 11 Mar 2024 14:16:25 +0530 you wrote:
> Use macro for image type instead of using hard code number.
>
> Signed-off-by: Kiran K <[email protected]>
> ---
> drivers/bluetooth/btintel.c | 12 ++++++------
> drivers/bluetooth/btintel.h | 3 +++
> 2 files changed, 9 insertions(+), 6 deletions(-)
Here is the summary with links:
- [v5,1/2] Bluetooth: btintel: Define macros for image types
https://git.kernel.org/bluetooth/bluetooth-next/c/cf53bd76851c
- [v5,2/2] Bluetooth: btintel: Add support to download intermediate loader
(no matching commit)
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html