WCN6855 will report memdump via ACL data or HCI event when
it get crashed, so we collect memdump to debug firmware.
Signed-off-by: Tim Jiang <[email protected]>
---
drivers/bluetooth/btusb.c | 222 ++++++++++++++++++++++++++++++++++++++
1 file changed, 222 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2303b0a66323..f045bbb0ee09 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -733,6 +733,16 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
{}
};
+struct qca_dump_info {
+ /* fields for dump collection */
+ u16 id_vendor;
+ u16 id_product;
+ u32 fw_version;
+ u32 controller_id;
+ u32 ram_dump_size;
+ u16 ram_dump_seqno;
+};
+
#define BTUSB_MAX_ISOC_FRAMES 10
#define BTUSB_INTR_RUNNING 0
@@ -752,6 +762,7 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
#define BTUSB_WAKEUP_AUTOSUSPEND 14
#define BTUSB_USE_ALT3_FOR_WBS 15
#define BTUSB_ALT6_CONTINUOUS_TX 16
+#define BTUSB_HW_SSR_ACTIVE 17
struct btusb_data {
struct hci_dev *hdev;
@@ -814,6 +825,8 @@ struct btusb_data {
int oob_wake_irq; /* irq for out-of-band wake-on-bt */
unsigned cmd_timeout_cnt;
+
+ struct qca_dump_info qca_dump;
};
static void btusb_reset(struct hci_dev *hdev)
@@ -904,6 +917,11 @@ static void btusb_qca_cmd_timeout(struct hci_dev *hdev)
struct btusb_data *data = hci_get_drvdata(hdev);
struct gpio_desc *reset_gpio = data->reset_gpio;
+ if (test_bit(BTUSB_HW_SSR_ACTIVE, &data->flags)) {
+ bt_dev_info(hdev, "Ramdump in progress, defer cmd_timeout");
+ return;
+ }
+
if (++data->cmd_timeout_cnt < 5)
return;
@@ -3294,6 +3312,202 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,
return 0;
}
+#define QCA_MEMDUMP_ACL_HANDLE 0x2EDD
+#define QCA_MEMDUMP_SIZE_MAX 0x100000
+#define QCA_MEMDUMP_VSE_CLASS 0x01
+#define QCA_MEMDUMP_MSG_TYPE 0x08
+#define QCA_MEMDUMP_PKT_SIZE 248
+#define QCA_LAST_SEQUENCE_NUM 0xffff
+
+struct qca_dump_hdr {
+ u8 vse_class;
+ u8 msg_type;
+ __le16 seqno;
+ u8 reserved;
+ union {
+ u8 data[0];
+ struct {
+ __le32 ram_dump_size;
+ u8 data0[0];
+ } __packed;
+ };
+} __packed;
+
+
+static void btusb_dump_hdr_qca(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ char buf[128];
+ struct btusb_data *btdata = hci_get_drvdata(hdev);
+
+ snprintf(buf, sizeof(buf), "Controller Name: 0x%x\n",
+ btdata->qca_dump.controller_id);
+ skb_put_data(skb, buf, strlen(buf));
+
+ snprintf(buf, sizeof(buf), "Firmware Version: 0x%x\n",
+ btdata->qca_dump.fw_version);
+ skb_put_data(skb, buf, strlen(buf));
+
+ snprintf(buf, sizeof(buf), "Driver: %s\nVendor: qca\n",
+ btusb_driver.name);
+ skb_put_data(skb, buf, strlen(buf));
+
+ snprintf(buf, sizeof(buf), "VID: 0x%x\nPID:0x%x\n",
+ btdata->qca_dump.id_vendor, btdata->qca_dump.id_product);
+ skb_put_data(skb, buf, strlen(buf));
+
+ snprintf(buf, sizeof(buf), "Lmp Subversion: 0x%x\n",
+ hdev->lmp_subver);
+ skb_put_data(skb, buf, strlen(buf));
+}
+
+static void btusb_coredump_qca(struct hci_dev *hdev)
+{
+ static const u8 param[] = { 0x26 };
+ struct sk_buff *skb;
+
+ skb = __hci_cmd_sync(hdev, 0xfc0c, 1, param, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb))
+ bt_dev_err(hdev, "%s: triggle crash failed (%ld)", __func__, PTR_ERR(skb));
+ kfree_skb(skb);
+}
+
+/*
+ * ==0: not a dump pkt.
+ * < 0: fails to handle a dump pkt
+ * > 0: otherwise.
+ */
+static int handle_dump_pkt_qca(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ int ret = 1;
+ u8 pkt_type;
+ u8 *sk_ptr;
+ unsigned int sk_len;
+ u16 seqno;
+ u32 dump_size;
+
+ struct hci_event_hdr *event_hdr;
+ struct hci_acl_hdr *acl_hdr;
+ struct qca_dump_hdr *dump_hdr;
+ struct btusb_data *btdata = hci_get_drvdata(hdev);
+ struct usb_device *udev = btdata->udev;
+
+ pkt_type = hci_skb_pkt_type(skb);
+ sk_ptr = skb->data;
+ sk_len = skb->len;
+
+ if (pkt_type == HCI_ACLDATA_PKT) {
+ acl_hdr = hci_acl_hdr(skb);
+ if (le16_to_cpu(acl_hdr->handle) != QCA_MEMDUMP_ACL_HANDLE)
+ return 0;
+ sk_ptr += HCI_ACL_HDR_SIZE;
+ sk_len -= HCI_ACL_HDR_SIZE;
+ event_hdr = (struct hci_event_hdr *)sk_ptr;
+ } else {
+ event_hdr = hci_event_hdr(skb);
+ }
+
+ if ((event_hdr->evt != HCI_VENDOR_PKT)
+ || (event_hdr->plen != (sk_len - HCI_EVENT_HDR_SIZE)))
+ return 0;
+
+ sk_ptr += HCI_EVENT_HDR_SIZE;
+ sk_len -= HCI_EVENT_HDR_SIZE;
+
+ dump_hdr = (struct qca_dump_hdr *)sk_ptr;
+ if ((sk_len < offsetof(struct qca_dump_hdr, data))
+ || (dump_hdr->vse_class != QCA_MEMDUMP_VSE_CLASS)
+ || (dump_hdr->msg_type != QCA_MEMDUMP_MSG_TYPE))
+ return 0;
+
+ /*it is dump pkt now*/
+ seqno = le16_to_cpu(dump_hdr->seqno);
+ if (seqno == 0) {
+ set_bit(BTUSB_HW_SSR_ACTIVE, &btdata->flags);
+ dump_size = le32_to_cpu(dump_hdr->ram_dump_size);
+ if (!dump_size || (dump_size > QCA_MEMDUMP_SIZE_MAX)) {
+ ret = -EILSEQ;
+ bt_dev_err(hdev, "Invalid memdump size(%u)",
+ dump_size);
+ goto out;
+ }
+
+ ret = hci_devcd_init(hdev, dump_size);
+ if (ret < 0) {
+ bt_dev_err(hdev, "memdump init error(%d)", ret);
+ goto out;
+ }
+
+ btdata->qca_dump.ram_dump_size = dump_size;
+ btdata->qca_dump.ram_dump_seqno = 0;
+ sk_ptr += offsetof(struct qca_dump_hdr, data0);
+ sk_len -= offsetof(struct qca_dump_hdr, data0);
+
+ usb_disable_autosuspend(udev);
+ bt_dev_info(hdev, "%s memdump size(%u)\n",
+ (pkt_type == HCI_ACLDATA_PKT) ? "ACL" : "event",
+ dump_size);
+ } else {
+ sk_ptr += offsetof(struct qca_dump_hdr, data);
+ sk_len -= offsetof(struct qca_dump_hdr, data);
+ }
+
+ if (!btdata->qca_dump.ram_dump_size) {
+ ret = -EINVAL;
+ bt_dev_err(hdev, "memdump is not active");
+ goto out;
+ }
+
+ if ((seqno > btdata->qca_dump.ram_dump_seqno + 1) && (seqno != QCA_LAST_SEQUENCE_NUM)) {
+ dump_size = QCA_MEMDUMP_PKT_SIZE * (seqno - btdata->qca_dump.ram_dump_seqno - 1);
+ hci_devcd_append_pattern(hdev, 0x0, dump_size);
+ bt_dev_err(hdev,
+ "expected memdump seqno(%u) is not received(%u)\n",
+ btdata->qca_dump.ram_dump_seqno, seqno);
+ btdata->qca_dump.ram_dump_seqno = seqno;
+ kfree_skb(skb);
+ return ret;
+ }
+
+ skb_pull(skb, skb->len - sk_len);
+ hci_devcd_append(hdev, skb);
+ btdata->qca_dump.ram_dump_seqno++;
+ if (seqno == QCA_LAST_SEQUENCE_NUM) {
+ bt_dev_info(hdev,
+ "memdump done: pkts(%u), total(%u)\n",
+ btdata->qca_dump.ram_dump_seqno, btdata->qca_dump.ram_dump_size);
+
+ hci_devcd_complete(hdev);
+ goto out;
+ }
+ return ret;
+
+out:
+ if (btdata->qca_dump.ram_dump_size)
+ usb_enable_autosuspend(udev);
+ btdata->qca_dump.ram_dump_size = 0;
+ btdata->qca_dump.ram_dump_seqno = 0;
+ clear_bit(BTUSB_HW_SSR_ACTIVE, &btdata->flags);
+
+ if (ret < 0)
+ kfree_skb(skb);
+ return ret;
+}
+
+static int btusb_recv_acl_qca(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ if (handle_dump_pkt_qca(hdev, skb))
+ return 0;
+ return hci_recv_frame(hdev, skb);
+}
+
+static int btusb_recv_evt_qca(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ if (handle_dump_pkt_qca(hdev, skb))
+ return 0;
+ return hci_recv_frame(hdev, skb);
+}
+
+
#define QCA_DFU_PACKET_LEN 4096
#define QCA_GET_TARGET_VERSION 0x09
@@ -3628,6 +3842,9 @@ static int btusb_setup_qca(struct hci_dev *hdev)
if (err < 0)
return err;
+ btdata->qca_dump.fw_version = le32_to_cpu(ver.patch_version);
+ btdata->qca_dump.controller_id = le32_to_cpu(ver.rom_version);
+
if (!(status & QCA_SYSCFG_UPDATED)) {
err = btusb_setup_qca_load_nvm(hdev, &ver, info);
if (err < 0)
@@ -4117,6 +4334,11 @@ static int btusb_probe(struct usb_interface *intf,
}
if (id->driver_info & BTUSB_QCA_WCN6855) {
+ data->qca_dump.id_vendor = id->idVendor;
+ data->qca_dump.id_product = id->idProduct;
+ data->recv_event = btusb_recv_evt_qca;
+ data->recv_acl = btusb_recv_acl_qca;
+ hci_devcd_register(hdev, btusb_coredump_qca, btusb_dump_hdr_qca, NULL);
data->setup_on_usb = btusb_setup_qca;
hdev->shutdown = btusb_shutdown_qca;
hdev->set_bdaddr = btusb_set_bdaddr_wcn6855;
--
2.17.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=741172
---Test result---
Test Summary:
CheckPatch PASS 0.81 seconds
GitLint PASS 0.29 seconds
SubjectPrefix PASS 0.10 seconds
BuildKernel PASS 32.92 seconds
CheckAllWarning PASS 35.42 seconds
CheckSparse PASS 40.65 seconds
CheckSmatch PASS 110.35 seconds
BuildKernel32 PASS 31.79 seconds
TestRunnerSetup PASS 456.05 seconds
TestRunner_l2cap-tester PASS 17.24 seconds
TestRunner_iso-tester PASS 20.98 seconds
TestRunner_bnep-tester PASS 5.65 seconds
TestRunner_mgmt-tester PASS 116.99 seconds
TestRunner_rfcomm-tester PASS 8.99 seconds
TestRunner_sco-tester PASS 8.43 seconds
TestRunner_ioctl-tester PASS 9.89 seconds
TestRunner_mesh-tester PASS 7.12 seconds
TestRunner_smp-tester PASS 8.16 seconds
TestRunner_userchan-tester PASS 5.94 seconds
IncrementalBuild PASS 29.73 seconds
---
Regards,
Linux Bluetooth
Hi Paul:
-----Original Message-----
From: Paul Menzel <[email protected]>
Sent: Wednesday, April 19, 2023 3:23 PM
To: Tim Jiang (QUIC) <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; Balakrishna Godavarthi (QUIC) <[email protected]>; Hemant Gupta (QUIC) <[email protected]>; [email protected]
Subject: Re: [PATCH v3] Bluetooth: btusb: Add WCN6855 devcoredump support
Dear Tim,
Than you for the patch.
Am 19.04.23 um 05:38 schrieb Tim Jiang:
> WCN6855 will report memdump via ACL data or HCI event when it get
> crashed, so we collect memdump to debug firmware.
s/when it get crashed/when it crashes/
Please give an example, how to collect the memdump, and maybe even how to force a crash.
[Tim] force a crash as following:
sudo hcitool cmd 3f 0c 26
collect the memdump , such as : cat /sys/class/devcoredump/devcd1/data > ~/crash.dmp
Please amend the commit message to document the specification/datasheet name and revision.
[Tim] what documents ?
Is WCN6855 the only device supporting this, or could other devices be easily added?
[Tim] no , some other qca devices also can be support this , I plan to raise another change
> Signed-off-by: Tim Jiang <[email protected]>
> ---
> drivers/bluetooth/btusb.c | 222 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 222 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 2303b0a66323..f045bbb0ee09 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -733,6 +733,16 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
> {}
> };
>
> +struct qca_dump_info {
> + /* fields for dump collection */
> + u16 id_vendor;
> + u16 id_product;
> + u32 fw_version;
> + u32 controller_id;
> + u32 ram_dump_size;
I’d add the unit to the variable name.
> + u16 ram_dump_seqno;
> +};
> +
> #define BTUSB_MAX_ISOC_FRAMES 10
>
> #define BTUSB_INTR_RUNNING 0
> @@ -752,6 +762,7 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
> #define BTUSB_WAKEUP_AUTOSUSPEND 14
> #define BTUSB_USE_ALT3_FOR_WBS 15
> #define BTUSB_ALT6_CONTINUOUS_TX 16
> +#define BTUSB_HW_SSR_ACTIVE 17
>
> struct btusb_data {
> struct hci_dev *hdev;
> @@ -814,6 +825,8 @@ struct btusb_data {
>
> int oob_wake_irq; /* irq for out-of-band wake-on-bt */
> unsigned cmd_timeout_cnt;
> +
> + struct qca_dump_info qca_dump;
> };
>
> static void btusb_reset(struct hci_dev *hdev) @@ -904,6 +917,11 @@
> static void btusb_qca_cmd_timeout(struct hci_dev *hdev)
> struct btusb_data *data = hci_get_drvdata(hdev);
> struct gpio_desc *reset_gpio = data->reset_gpio;
>
> + if (test_bit(BTUSB_HW_SSR_ACTIVE, &data->flags)) {
> + bt_dev_info(hdev, "Ramdump in progress, defer cmd_timeout");
> + return;
> + }
> +
> if (++data->cmd_timeout_cnt < 5)
> return;
>
> @@ -3294,6 +3312,202 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,
> return 0;
> }
>
> +#define QCA_MEMDUMP_ACL_HANDLE 0x2EDD #define QCA_MEMDUMP_SIZE_MAX
> +0x100000 #define QCA_MEMDUMP_VSE_CLASS 0x01 #define
> +QCA_MEMDUMP_MSG_TYPE 0x08 #define QCA_MEMDUMP_PKT_SIZE 248 #define
> +QCA_LAST_SEQUENCE_NUM 0xffff
> +
> +struct qca_dump_hdr {
> + u8 vse_class;
> + u8 msg_type;
> + __le16 seqno;
> + u8 reserved;
> + union {
> + u8 data[0];
> + struct {
> + __le32 ram_dump_size;
> + u8 data0[0];
> + } __packed;
> + };
> +} __packed;
> +
> +
> +static void btusb_dump_hdr_qca(struct hci_dev *hdev, struct sk_buff
> +*skb) {
> + char buf[128];
> + struct btusb_data *btdata = hci_get_drvdata(hdev);
> +
> + snprintf(buf, sizeof(buf), "Controller Name: 0x%x\n",
> + btdata->qca_dump.controller_id);
> + skb_put_data(skb, buf, strlen(buf));
> +
> + snprintf(buf, sizeof(buf), "Firmware Version: 0x%x\n",
> + btdata->qca_dump.fw_version);
> + skb_put_data(skb, buf, strlen(buf));
> +
> + snprintf(buf, sizeof(buf), "Driver: %s\nVendor: qca\n",
> + btusb_driver.name);
> + skb_put_data(skb, buf, strlen(buf));
> +
> + snprintf(buf, sizeof(buf), "VID: 0x%x\nPID:0x%x\n",
> + btdata->qca_dump.id_vendor, btdata->qca_dump.id_product);
> + skb_put_data(skb, buf, strlen(buf));
> +
> + snprintf(buf, sizeof(buf), "Lmp Subversion: 0x%x\n",
> + hdev->lmp_subver);
> + skb_put_data(skb, buf, strlen(buf)); }
> +
> +static void btusb_coredump_qca(struct hci_dev *hdev) {
> + static const u8 param[] = { 0x26 };
> + struct sk_buff *skb;
> +
> + skb = __hci_cmd_sync(hdev, 0xfc0c, 1, param, HCI_CMD_TIMEOUT);
> + if (IS_ERR(skb))
> + bt_dev_err(hdev, "%s: triggle crash failed (%ld)", __func__,
> +PTR_ERR(skb));
What does “triggle” mean?
> + kfree_skb(skb);
> +}
> +
> +/*
> + * ==0: not a dump pkt.
> + * < 0: fails to handle a dump pkt
> + * > 0: otherwise.
> + */
> +static int handle_dump_pkt_qca(struct hci_dev *hdev, struct sk_buff
> +*skb) {
> + int ret = 1;
> + u8 pkt_type;
> + u8 *sk_ptr;
> + unsigned int sk_len;
> + u16 seqno;
> + u32 dump_size;
> +
> + struct hci_event_hdr *event_hdr;
> + struct hci_acl_hdr *acl_hdr;
> + struct qca_dump_hdr *dump_hdr;
> + struct btusb_data *btdata = hci_get_drvdata(hdev);
> + struct usb_device *udev = btdata->udev;
> +
> + pkt_type = hci_skb_pkt_type(skb);
> + sk_ptr = skb->data;
> + sk_len = skb->len;
> +
> + if (pkt_type == HCI_ACLDATA_PKT) {
> + acl_hdr = hci_acl_hdr(skb);
> + if (le16_to_cpu(acl_hdr->handle) != QCA_MEMDUMP_ACL_HANDLE)
> + return 0;
> + sk_ptr += HCI_ACL_HDR_SIZE;
> + sk_len -= HCI_ACL_HDR_SIZE;
> + event_hdr = (struct hci_event_hdr *)sk_ptr;
> + } else {
> + event_hdr = hci_event_hdr(skb);
> + }
> +
> + if ((event_hdr->evt != HCI_VENDOR_PKT)
> + || (event_hdr->plen != (sk_len - HCI_EVENT_HDR_SIZE)))
> + return 0;
Indentation/alignment of the second and third line (it’s the same) looks confusing, as it’s not clear, what is the body.
> +
> + sk_ptr += HCI_EVENT_HDR_SIZE;
> + sk_len -= HCI_EVENT_HDR_SIZE;
> +
> + dump_hdr = (struct qca_dump_hdr *)sk_ptr;
> + if ((sk_len < offsetof(struct qca_dump_hdr, data))
> + || (dump_hdr->vse_class != QCA_MEMDUMP_VSE_CLASS)
> + || (dump_hdr->msg_type != QCA_MEMDUMP_MSG_TYPE))
The coding style is off.
> + return 0;
> +
> + /*it is dump pkt now*/
Please add spaces, and elaborate. I do not understant the comment.
> + seqno = le16_to_cpu(dump_hdr->seqno);
> + if (seqno == 0) {
> + set_bit(BTUSB_HW_SSR_ACTIVE, &btdata->flags);
> + dump_size = le32_to_cpu(dump_hdr->ram_dump_size);
> + if (!dump_size || (dump_size > QCA_MEMDUMP_SIZE_MAX)) {
> + ret = -EILSEQ;
> + bt_dev_err(hdev, "Invalid memdump size(%u)",
> + dump_size);
> + goto out;
> + }
> +
> + ret = hci_devcd_init(hdev, dump_size);
> + if (ret < 0) {
> + bt_dev_err(hdev, "memdump init error(%d)", ret);
I’d add spaces before the (.
> + goto out;
> + }
> +
> + btdata->qca_dump.ram_dump_size = dump_size;
> + btdata->qca_dump.ram_dump_seqno = 0;
> + sk_ptr += offsetof(struct qca_dump_hdr, data0);
> + sk_len -= offsetof(struct qca_dump_hdr, data0);
> +
> + usb_disable_autosuspend(udev);
> + bt_dev_info(hdev, "%s memdump size(%u)\n",
> + (pkt_type == HCI_ACLDATA_PKT) ? "ACL" : "event",
> + dump_size);
> + } else {
> + sk_ptr += offsetof(struct qca_dump_hdr, data);
> + sk_len -= offsetof(struct qca_dump_hdr, data);
> + }
> +
> + if (!btdata->qca_dump.ram_dump_size) {
> + ret = -EINVAL;
> + bt_dev_err(hdev, "memdump is not active");
What is the heuristics behind that? Setting `ram_dump_size` to zero disables the feature? Where is this documented?
> + goto out;
> + }
> +
> + if ((seqno > btdata->qca_dump.ram_dump_seqno + 1) && (seqno != QCA_LAST_SEQUENCE_NUM)) {
> + dump_size = QCA_MEMDUMP_PKT_SIZE * (seqno - btdata->qca_dump.ram_dump_seqno - 1);
> + hci_devcd_append_pattern(hdev, 0x0, dump_size);
> + bt_dev_err(hdev,
> + "expected memdump seqno(%u) is not received(%u)\n",
I’d add spaces before the ( – also in other places.
Kind regards,
Paul
> + btdata->qca_dump.ram_dump_seqno, seqno);
> + btdata->qca_dump.ram_dump_seqno = seqno;
> + kfree_skb(skb);
> + return ret;
> + }
> +
> + skb_pull(skb, skb->len - sk_len);
> + hci_devcd_append(hdev, skb);
> + btdata->qca_dump.ram_dump_seqno++;
> + if (seqno == QCA_LAST_SEQUENCE_NUM) {
> + bt_dev_info(hdev,
> + "memdump done: pkts(%u), total(%u)\n",
> + btdata->qca_dump.ram_dump_seqno, btdata->qca_dump.ram_dump_size);
> +
> + hci_devcd_complete(hdev);
> + goto out;
> + }
> + return ret;
> +
> +out:
> + if (btdata->qca_dump.ram_dump_size)
> + usb_enable_autosuspend(udev);
> + btdata->qca_dump.ram_dump_size = 0;
> + btdata->qca_dump.ram_dump_seqno = 0;
> + clear_bit(BTUSB_HW_SSR_ACTIVE, &btdata->flags);
> +
> + if (ret < 0)
> + kfree_skb(skb);
> + return ret;
> +}
> +
> +static int btusb_recv_acl_qca(struct hci_dev *hdev, struct sk_buff
> +*skb) {
> + if (handle_dump_pkt_qca(hdev, skb))
> + return 0;
> + return hci_recv_frame(hdev, skb);
> +}
> +
> +static int btusb_recv_evt_qca(struct hci_dev *hdev, struct sk_buff
> +*skb) {
> + if (handle_dump_pkt_qca(hdev, skb))
> + return 0;
> + return hci_recv_frame(hdev, skb);
> +}
> +
> +
> #define QCA_DFU_PACKET_LEN 4096
>
> #define QCA_GET_TARGET_VERSION 0x09
> @@ -3628,6 +3842,9 @@ static int btusb_setup_qca(struct hci_dev *hdev)
> if (err < 0)
> return err;
>
> + btdata->qca_dump.fw_version = le32_to_cpu(ver.patch_version);
> + btdata->qca_dump.controller_id = le32_to_cpu(ver.rom_version);
> +
> if (!(status & QCA_SYSCFG_UPDATED)) {
> err = btusb_setup_qca_load_nvm(hdev, &ver, info);
> if (err < 0)
> @@ -4117,6 +4334,11 @@ static int btusb_probe(struct usb_interface *intf,
> }
>
> if (id->driver_info & BTUSB_QCA_WCN6855) {
> + data->qca_dump.id_vendor = id->idVendor;
> + data->qca_dump.id_product = id->idProduct;
> + data->recv_event = btusb_recv_evt_qca;
> + data->recv_acl = btusb_recv_acl_qca;
> + hci_devcd_register(hdev, btusb_coredump_qca, btusb_dump_hdr_qca,
> +NULL);
> data->setup_on_usb = btusb_setup_qca;
> hdev->shutdown = btusb_shutdown_qca;
> hdev->set_bdaddr = btusb_set_bdaddr_wcn6855;
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <[email protected]>:
On Wed, 19 Apr 2023 11:38:05 +0800 you wrote:
> WCN6855 will report memdump via ACL data or HCI event when
> it get crashed, so we collect memdump to debug firmware.
>
> Signed-off-by: Tim Jiang <[email protected]>
> ---
> drivers/bluetooth/btusb.c | 222 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 222 insertions(+)
Here is the summary with links:
- [v3] Bluetooth: btusb: Add WCN6855 devcoredump support
https://git.kernel.org/bluetooth/bluetooth-next/c/8c70acc21f68
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html