Good afternoon,
I'm working on a small embedded system with its own stack and using BlueZ on
Ubuntu 9.04 (4.32 according to apt-cache).
I am using a very stupid l2cap test program (listed below) to just open a
connection to psm 0x1001 and send "Hello, World!".
The embedded system receives the L2CAP connection request from BlueZ (scid of
0x0040) and responds by sending a configuration request. It uses dcid 0x0040.
BlueZ responds to the configuration request with a successful configuration
response, but it sets the scid to 0x0000 and I can't for the life of me figure
out why.
The raw HCI packets (obtained from hcidump) are as follows:
BlueZ connection request:
02 2a 20 0c 00 08 00 01 00 02 02 04 00 01 10 40 00
Embedded configure request:
02 2a 20 10 00 0c 00 01 00 04 02 08 00 40 00 00 00 01 02 96 00
BlueZ configure response:
02 2a 20 12 00 0e 00 01 00 05 02 0a 00 00 00 00 00 00 00 01 02 96 00
BlueZ configure request:
02 2a 20 0c 00 08 00 01 00 04 03 04 00 00 00 00 00
As you can see, the connection request is using scid 0x0040 to psm 0x1001, and
the configure request coming back to BlueZ is using dcid 0x0040. The BlueZ
configure response (and subsequent request) are using channel id 0x0000. Why is
this?
If I patch out the embedded system's L2CAP handler code to accept the
configuration response coming from the wrong cid BlueZ continues by sending the
data packet ("Hello, World!" but again, to dcid 0x0000...
Why is BlueZ flipping the channel ID like this? I am assuming that I am making
a mistake somewhere as BlueZ gets a LOT more use than this embedded stack, but
I can't figure out what this is happening for nor how to correctly work with
it.
Regards,
Andrew
l2captest program:
$ cat tools/l2captest/l2capclient.c
#include <stdio.h>
#include <string.h>
#include <sys/socket.h>
#include <bluetooth/bluetooth.h>
#include <bluetooth/l2cap.h>
int main(int argc, char **argv)
{
struct sockaddr_l2 addr = { 0 };
int s, status;
char *message = "Hello, world!\n";
char dest[18] = "11:22:33:44:55:66";
if(argc < 2) {
fprintf(stderr, "usage: %s <bt_addr>\n", argv[0]);
return 1;
}
strncpy(dest, argv[1], 18);
// allocate a socket
s = socket(AF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_L2CAP);
// set the connection parameters (who to connect to)
addr.l2_family = AF_BLUETOOTH;
addr.l2_psm = htobs(0x1001);
str2ba(dest, &addr.l2_bdaddr);
// connect to server
status = connect(s, (struct sockaddr *)&addr, sizeof(addr));
// send a message
if(status == 0) {
status = write(s, message, 15);
}
if( status < 0 ) perror("uh oh");
close(s);
return 0;
}
hcidump -XV -t output:
HCI sniffer - Bluetooth packet analyzer ver 1.42
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
2010-06-13 17:27:08.423268 < HCI Command: Create Connection (0x01|0x0005) plen
13
bdaddr 11:22:33:44:55:66 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2010-06-13 17:27:08.495324 > HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
2010-06-13 17:27:09.703325 > HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 42 bdaddr 11:22:33:44:55:66 type ACL encrypt 0x00
2010-06-13 17:27:09.703363 < HCI Command: Read Remote Supported Features
(0x01|0x001b) plen 2
handle 42
2010-06-13 17:27:09.740326 > HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
2010-06-13 17:27:09.741324 > HCI Event: Page Scan Repetition Mode Change
(0x20) plen 7
bdaddr 11:22:33:44:55:66 mode 1
2010-06-13 17:27:09.742327 > HCI Event: Max Slots Change (0x1b) plen 3
handle 42 slots 5
2010-06-13 17:27:09.745327 > HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 1
2010-06-13 17:27:09.745343 < HCI Command: Remote Name Request (0x01|0x0019)
plen 10
bdaddr 11:22:33:44:55:66 mode 2 clkoffset 0x0000
2010-06-13 17:27:09.749324 > HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
2010-06-13 17:27:09.754206 > HCI Event: Read Remote Supported Features (0x0b)
plen 11
status 0x00 handle 42
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
2010-06-13 17:27:09.754227 < ACL data: handle 42 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
2010-06-13 17:27:09.759326 > HCI Event: Number of Completed Packets (0x13)
plen 5
handle 42 packets 1
2010-06-13 17:27:09.777323 > HCI Event: Remote Name Req Complete (0x07) plen
255
status 0x00 bdaddr 11:22:33:44:55:66 name 'inPulse'
2010-06-13 17:27:09.824448 > ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Info rsp: type 2 result 1
Not supported
2010-06-13 17:27:09.824469 < ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 4097 scid 0x0040
2010-06-13 17:27:09.830326 > HCI Event: Number of Completed Packets (0x13)
plen 5
handle 42 packets 1
2010-06-13 17:27:10.195699 > ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 150
2010-06-13 17:27:10.195724 < ACL data: handle 42 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0000 flags 0x00 result 0 clen 4
MTU 150
2010-06-13 17:27:10.195728 < ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0000 flags 0x00 clen 0
2010-06-13 17:27:10.201327 > HCI Event: Number of Completed Packets (0x13)
plen 5
handle 42 packets 1
2010-06-13 17:27:10.203324 > HCI Event: Number of Completed Packets (0x13)
plen 5
handle 42 packets 1
(after a long pause, it times out)
2010-06-13 17:27:50.422951 < HCI Command: Disconnect (0x01|0x0006) plen 3
handle 42 reason 0x13
Reason: Remote User Terminated Connection
2010-06-13 17:27:50.426338 > HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
2010-06-13 17:27:50.430344 > HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 42 reason 0x16
Reason: Connection Terminated by Local Host
* Gustavo F. Padovan <[email protected]> [2010-06-14 02:26:15 -0300]:
> From: Gustavo F. Padovan <[email protected]>
>
> If such event happens we shall reply with a Command Reject, because we are
> not expecting any configure request.
>
> Signed-off-by: Gustavo F. Padovan <[email protected]>
> ---
> net/bluetooth/l2cap.c | 8 +++++++-
> 1 files changed, 7 insertions(+), 1 deletions(-)
>
> diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
> index 9753b69..f725fcc 100644
> --- a/net/bluetooth/l2cap.c
> +++ b/net/bluetooth/l2cap.c
> @@ -2741,8 +2741,14 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr
> if (!sk)
> return -ENOENT;
>
> - if (sk->sk_state == BT_DISCONN)
> + if (sk->sk_state != BT_CONFIG) {
> + struct l2cap_cmd_rej rej;
> +
> + rej.reason = cpu_to_le16(0x0002);
> + l2cap_send_cmd(conn, cmd.ident, L2CAP_COMMAND_REJ,
> + sizeof(rej), &rej);
> goto unlock;
> + }
>
> /* Reject if config buffer is too small. */
> len = cmd_len - sizeof(*req);
I tested this one by myself. I'm queueing it for -next.
With a little modification it works.
- l2cap_send_cmd(conn, cmd.ident, L2CAP_COMMAND_REJ,
+ l2cap_send_cmd(conn, cmd->ident, L2CAP_COMMAND_REJ,
i.e., the original patch even compile. ;)
--
Gustavo F. Padovan
http://padovan.org
From: Gustavo F. Padovan <[email protected]>
If such event happens we shall reply with a Command Reject, because we are
not expecting any configure request.
Signed-off-by: Gustavo F. Padovan <[email protected]>
---
net/bluetooth/l2cap.c | 8 +++++++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 9753b69..f725fcc 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -2741,8 +2741,14 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr
if (!sk)
return -ENOENT;
- if (sk->sk_state == BT_DISCONN)
+ if (sk->sk_state != BT_CONFIG) {
+ struct l2cap_cmd_rej rej;
+
+ rej.reason = cpu_to_le16(0x0002);
+ l2cap_send_cmd(conn, cmd.ident, L2CAP_COMMAND_REJ,
+ sizeof(rej), &rej);
goto unlock;
+ }
/* Reject if config buffer is too small. */
len = cmd_len - sizeof(*req);
--
1.7.1
Hi Andrew,
* Andrew Kohlsmith (mailing lists account) <[email protected]> [2010-06-13 17:28:35 -0400]:
> Good afternoon,
>
> I'm working on a small embedded system with its own stack and using BlueZ on
> Ubuntu 9.04 (4.32 according to apt-cache).
>
> I am using a very stupid l2cap test program (listed below) to just open a
> connection to psm 0x1001 and send "Hello, World!".
>
> The embedded system receives the L2CAP connection request from BlueZ (scid of
> 0x0040) and responds by sending a configuration request. It uses dcid 0x0040.
> BlueZ responds to the configuration request with a successful configuration
> response, but it sets the scid to 0x0.000 and I can't for the life of me figure
> out why.
>
> The raw HCI packets (obtained from hcidump) are as follows:
>
> BlueZ connection request:
> 02 2a 20 0c 00 08 00 01 00 02 02 04 00 01 10 40 00
There is a missing connection response from the Embedded here. It sends
the configure response directly.
Bluez shouldn't even send a config request in this case, this is another
bug btw. Not related to yours.
>
> Embedded configure request:
> 02 2a 20 10 00 0c 00 01 00 04 02 08 00 40 00 00 00 01 02 96 00
>
> BlueZ configure response:
> 02 2a 20 12 00 0e 00 01 00 05 02 0a 00 00 00 00 00 00 00 01 02 96 00
>
> BlueZ configure request:
> 02 2a 20 0c 00 08 00 01 00 04 03 04 00 00 00 00 00
>
> As you can see, the connection request is using scid 0x0040 to psm 0x1001, and
> the configure request coming back to BlueZ is using dcid 0x0040. The BlueZ
> configure response (and subsequent request) are using channel id 0x0000. Why is
> this?
>
> If I patch out the embedded system's L2CAP handler code to accept the
> configuration response coming from the wrong cid BlueZ continues by sending the
> data packet ("Hello, World!" but again, to dcid 0x0000...
>
> Why is BlueZ flipping the channel ID like this? I am assuming that I am making
> a mistake somewhere as BlueZ gets a LOT more use than this embedded stack, but
> I can't figure out what this is happening for nor how to correctly work with
> it.
>
--
Gustavo F. Padovan
http://padovan.org
On Sunday, June 13, 2010 05:28:35 pm Andrew Kohlsmith (mailing lists account)
wrote:
> I'm working on a small embedded system with its own stack and using BlueZ
> on Ubuntu 9.04 (4.32 according to apt-cache).
I should also note the kernel I'm running, as some discussion on the IRC
channel indicated that this stuff is actually in the kernel and not bluetoothd.
$ uname -a
Linux office.mixdown.ca 2.6.28-19-generic #61-Ubuntu SMP Wed May 26 23:32:46 UTC
2010 x86_64 GNU/Linux
-A.