This adds a new BT_AMP socket option to control the use of AMP channels.
It is for use with the SOL_BLUETOOTH option level on L2CAP sockets.
Available option values are defined as:
BT_AMP_REQUIRE_BR_EDR
* Default
* AMP controllers cannot be used
* Channel move requests from the remote device are denied
* If the L2CAP channel is currently using AMP, move the channel to
BR/EDR
BT_AMP_PREFER_AMP
* Allow use of AMP controllers
* If the L2CAP channel is currently on BR/EDR and AMP controller
resources are available, initiate a channel move to AMP
* Channel move requests from the remote device are allowed
* If the L2CAP socket has not been connected yet, try to create
and configure the channel directly on an AMP controller rather
than BR/EDR
BT_AMP_PREFER_BR_EDR
* Allow use of AMP controllers
* If the L2CAP channel is currently on AMP, move it to BR/EDR
* Channel move requests from the remote device are allowed
Signed-off-by: Mat Martineau <[email protected]>
---
include/net/bluetooth/bluetooth.h | 25 +++++++++++++++++++++++++
1 files changed, 25 insertions(+), 0 deletions(-)
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 27a902d..5e8b6c3 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -64,6 +64,31 @@ struct bt_security {
#define BT_DEFER_SETUP 7
+
+#define BT_AMP_POLICY 8
+/* Require BR/EDR (default policy)
+ * AMP controllers cannot be used
+ * Channel move requests from the remote device are denied
+ * If the L2CAP channel is currently using AMP, move the channel to BR/EDR
+ */
+#define BT_AMP_POLICY_REQUIRE_BR_EDR 0
+/* Prefer AMP
+ * Allow use of AMP controllers
+ * If the L2CAP channel is currently on BR/EDR and AMP controller
+ * resources are available, initiate a channel move to AMP
+ * Channel move requests from the remote device are allowed
+ * If the L2CAP socket has not been connected yet, try to create
+ * and configure the channel directly on an AMP controller rather
+ * than BR/EDR
+ */
+#define BT_AMP_POLICY_PREFER_AMP 1
+/* Prefer BR/EDR
+ * Allow use of AMP controllers
+ * If the L2CAP channel is currently on AMP, move it to BR/EDR
+ * Channel move requests from the remote device are allowed
+ */
+#define BT_AMP_POLICY_PREFER_BR_EDR 2
+
#define BT_INFO(fmt, arg...) printk(KERN_INFO "Bluetooth: " fmt "\n" , ## arg)
#define BT_ERR(fmt, arg...) printk(KERN_ERR "%s: " fmt "\n" , __func__ , ## arg)
#define BT_DBG(fmt, arg...) pr_debug("%s: " fmt "\n" , __func__ , ## arg)
--
1.7.1
Hi Mat,
* Mat Martineau <[email protected]> [2010-09-08 09:46:14 -0700]:
> This adds a new BT_AMP socket option to control the use of AMP channels.
> It is for use with the SOL_BLUETOOTH option level on L2CAP sockets.
>
> Available option values are defined as:
>
> BT_AMP_REQUIRE_BR_EDR
> * Default
> * AMP controllers cannot be used
> * Channel move requests from the remote device are denied
> * If the L2CAP channel is currently using AMP, move the channel to
> BR/EDR
>
> BT_AMP_PREFER_AMP
> * Allow use of AMP controllers
> * If the L2CAP channel is currently on BR/EDR and AMP controller
> resources are available, initiate a channel move to AMP
> * Channel move requests from the remote device are allowed
> * If the L2CAP socket has not been connected yet, try to create
> and configure the channel directly on an AMP controller rather
> than BR/EDR
>
> BT_AMP_PREFER_BR_EDR
> * Allow use of AMP controllers
> * If the L2CAP channel is currently on AMP, move it to BR/EDR
> * Channel move requests from the remote device are allowed
>
> Signed-off-by: Mat Martineau <[email protected]>
> ---
> include/net/bluetooth/bluetooth.h | 25 +++++++++++++++++++++++++
> 1 files changed, 25 insertions(+), 0 deletions(-)
>
> diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
> index 27a902d..5e8b6c3 100644
> --- a/include/net/bluetooth/bluetooth.h
> +++ b/include/net/bluetooth/bluetooth.h
> @@ -64,6 +64,31 @@ struct bt_security {
>
> #define BT_DEFER_SETUP 7
>
> +
> +#define BT_AMP_POLICY 8
Please add a empty line here.
> +/* Require BR/EDR (default policy)
> + * AMP controllers cannot be used
> + * Channel move requests from the remote device are denied
> + * If the L2CAP channel is currently using AMP, move the channel to BR/EDR
> + */
> +#define BT_AMP_POLICY_REQUIRE_BR_EDR 0
And here.
> +/* Prefer AMP
> + * Allow use of AMP controllers
> + * If the L2CAP channel is currently on BR/EDR and AMP controller
> + * resources are available, initiate a channel move to AMP
> + * Channel move requests from the remote device are allowed
> + * If the L2CAP socket has not been connected yet, try to create
> + * and configure the channel directly on an AMP controller rather
> + * than BR/EDR
> + */
> +#define BT_AMP_POLICY_PREFER_AMP 1
And here.
> +/* Prefer BR/EDR
> + * Allow use of AMP controllers
> + * If the L2CAP channel is currently on AMP, move it to BR/EDR
> + * Channel move requests from the remote device are allowed
> + */
> +#define BT_AMP_POLICY_PREFER_BR_EDR 2
> +
> #define BT_INFO(fmt, arg...) printk(KERN_INFO "Bluetooth: " fmt "\n" , ## arg)
> #define BT_ERR(fmt, arg...) printk(KERN_ERR "%s: " fmt "\n" , __func__ , ## arg)
> #define BT_DBG(fmt, arg...) pr_debug("%s: " fmt "\n" , __func__ , ## arg)
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Gustavo F. Padovan
roFUSION embedded systems - http://profusion.mobi