This patch adds support for the ST-Ericsson CG2900
Connectivity Combo controller (Bluetooth, FM, GPS).
Signed-off-by: Par-Gunnar Hjalmdahl <[email protected]>
Acked-by: Linus Walleij <[email protected]>
---
drivers/staging/Kconfig | 2 +
drivers/staging/Makefile | 1 +
drivers/staging/cg2900/Kconfig | 72 +
drivers/staging/cg2900/Makefile | 12 +
drivers/staging/cg2900/TODO | 23 +
drivers/staging/cg2900/bluetooth/Makefile | 9 +
drivers/staging/cg2900/bluetooth/btcg2900.c | 1203 ++++++++
drivers/staging/cg2900/bluetooth/cg2900_uart.c | 2074 +++++++++++++
drivers/staging/cg2900/bluetooth/hci_ldisc.c | 657 ++++
drivers/staging/cg2900/bluetooth/hci_uart.h | 105 +
drivers/staging/cg2900/board-mop500-cg2900.c | 204 ++
drivers/staging/cg2900/devices-cg2900.c | 342 +++
drivers/staging/cg2900/devices-cg2900.h | 31 +
drivers/staging/cg2900/include/cg2900.h | 278 ++
drivers/staging/cg2900/include/cg2900_audio.h | 473 +++
drivers/staging/cg2900/include/cg2900_hci.h | 19 +
drivers/staging/cg2900/mfd/Makefile | 18 +
drivers/staging/cg2900/mfd/cg2900_audio.c | 3462 ++++++++++++++++++++++
drivers/staging/cg2900/mfd/cg2900_char_devices.c | 701 +++++
drivers/staging/cg2900/mfd/cg2900_chip.c | 3415 +++++++++++++++++++++
drivers/staging/cg2900/mfd/cg2900_chip.h | 613 ++++
drivers/staging/cg2900/mfd/cg2900_core.c | 713 +++++
drivers/staging/cg2900/mfd/cg2900_core.h | 51 +
drivers/staging/cg2900/mfd/cg2900_lib.c | 281 ++
drivers/staging/cg2900/mfd/cg2900_lib.h | 61 +
drivers/staging/cg2900/mfd/cg2900_test.c | 402 +++
drivers/staging/cg2900/mfd/stlc2690_chip.c | 1653 +++++++++++
drivers/staging/cg2900/mfd/stlc2690_chip.h | 47 +
28 files changed, 16922 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/cg2900/Kconfig
create mode 100644 drivers/staging/cg2900/Makefile
create mode 100644 drivers/staging/cg2900/TODO
create mode 100644 drivers/staging/cg2900/bluetooth/Makefile
create mode 100644 drivers/staging/cg2900/bluetooth/btcg2900.c
create mode 100644 drivers/staging/cg2900/bluetooth/cg2900_uart.c
create mode 100644 drivers/staging/cg2900/bluetooth/hci_ldisc.c
create mode 100644 drivers/staging/cg2900/bluetooth/hci_uart.h
create mode 100644 drivers/staging/cg2900/board-mop500-cg2900.c
create mode 100644 drivers/staging/cg2900/devices-cg2900.c
create mode 100644 drivers/staging/cg2900/devices-cg2900.h
create mode 100644 drivers/staging/cg2900/include/cg2900.h
create mode 100644 drivers/staging/cg2900/include/cg2900_audio.h
create mode 100644 drivers/staging/cg2900/include/cg2900_hci.h
create mode 100644 drivers/staging/cg2900/mfd/Makefile
create mode 100644 drivers/staging/cg2900/mfd/cg2900_audio.c
create mode 100644 drivers/staging/cg2900/mfd/cg2900_char_devices.c
create mode 100644 drivers/staging/cg2900/mfd/cg2900_chip.c
create mode 100644 drivers/staging/cg2900/mfd/cg2900_chip.h
create mode 100644 drivers/staging/cg2900/mfd/cg2900_core.c
create mode 100644 drivers/staging/cg2900/mfd/cg2900_core.h
create mode 100644 drivers/staging/cg2900/mfd/cg2900_lib.c
create mode 100644 drivers/staging/cg2900/mfd/cg2900_lib.h
create mode 100644 drivers/staging/cg2900/mfd/cg2900_test.c
create mode 100644 drivers/staging/cg2900/mfd/stlc2690_chip.c
create mode 100644 drivers/staging/cg2900/mfd/stlc2690_chip.h
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 5c8fcfc..148f2e6 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -179,5 +179,7 @@ source "drivers/staging/cptm1217/Kconfig"
source "drivers/staging/ste_rmi4/Kconfig"
+source "drivers/staging/cg2900/Kconfig"
+
endif # !STAGING_EXCLUDE_BUILD
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index d538863..b402cab 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_W35UND) += winbond/
obj-$(CONFIG_PRISM2_USB) += wlan-ng/
obj-$(CONFIG_ECHO) += echo/
obj-$(CONFIG_BRCM80211) += brcm80211/
+obj-$(CONFIG_CG2900) += cg2900/
obj-$(CONFIG_RT2860) += rt2860/
obj-$(CONFIG_RT2870) += rt2870/
obj-$(CONFIG_COMEDI) += comedi/
diff --git a/drivers/staging/cg2900/Kconfig b/drivers/staging/cg2900/Kconfig
new file mode 100644
index 0000000..2a0d14c
--- /dev/null
+++ b/drivers/staging/cg2900/Kconfig
@@ -0,0 +1,72 @@
+#
+# CG2900
+#
+
+config CG2900
+ tristate "Support ST-Ericsson CG2900 main structure"
+ depends on NET && MFD_SUPPORT
+ help
+ ST-Ericsson CG2900 Connectivity Combo controller main
+ structure.
+ Supports multiple functionalities muxed over a Bluetooth HCI H:4
+ interface.
+ CG2900 support Bluetooth, FM radio, and GPS.
+
+config CG2900_CHIP
+ tristate "Support CG2900 Connectivity controller"
+ depends on CG2900
+ help
+ ST-Ericsson CG2900 Connectivity Controller chip handler.
+ Contains chip handler performing driver initialization
+ such as patchdownload and also instantiates the supported
+ MFD devices.
+
+config STLC2690_CHIP
+ tristate "Support STLC2690 Connectivity controller"
+ depends on CG2900
+ help
+ ST-Ericsson STLC2690 Connectivity Controller chip handler.
+ Contains chip handler performing driver initialization
+ such as patchdownload and also instantiates the supported
+ MFD devices.
+
+config CG2900_UART
+ tristate "Support CG2900 UART transport"
+ depends on CG2900
+ select BT
+ select BT_HCIUART
+ help
+ UART driver for ST-Ericsson CG2900 Connectivity Controller.
+ Contains functions for setting baud rate and to transport
+ data to and from the CG2900 controller over UART.
+ Also handles low power handling for the CG2900 when using UART as
+ transport.
+
+config CG2900_AUDIO
+ tristate "Support CG2900 audio interface"
+ depends on CG2900
+ help
+ ST-Ericsson CG2900 Connectivity audio interface driver.
+ Gives a module the ability to setup audio paths
+ within the CG2900 controller.
+ Supports both a normal function API and using character device
+ from user space.
+
+config CG2900_TEST
+ tristate "Support CG2900 Test Char Device"
+ depends on CG2900
+ help
+ ST-Ericsson CG2900 Test Character Device driver.
+ Creates a character device which can be used by
+ a test framework in user space to emulate a connected chip.
+ Note that this is used to test the chip handler driver,
+ not to test the connected chip.
+
+config BT_CG2900
+ tristate "ST-Ericsson CG2900 Bluetooth driver"
+ depends on CG2900 && BT
+ help
+ Select if ST-Ericsson CG2900 Connectivity controller shall be used as
+ Bluetooth controller for BlueZ.
+ This driver registers to the Bluetooth stack and when opened,
+ enables the CG2900 controller in a proper way.
diff --git a/drivers/staging/cg2900/Makefile b/drivers/staging/cg2900/Makefile
new file mode 100644
index 0000000..c6414c2
--- /dev/null
+++ b/drivers/staging/cg2900/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for ST-Ericsson CG2900 connectivity combo controller
+#
+
+ccflags-y := \
+ -Idrivers/staging/cg2900/include \
+ -Iarch/arm/mach-ux500
+
+obj-$(CONFIG_CG2900) += board-mop500-cg2900.o devices-cg2900.o
+
+obj-y += mfd/
+obj-y += bluetooth/
diff --git a/drivers/staging/cg2900/TODO b/drivers/staging/cg2900/TODO
new file mode 100644
index 0000000..e122eba
--- /dev/null
+++ b/drivers/staging/cg2900/TODO
@@ -0,0 +1,23 @@
+TODO
+----
+
+ - Decide upon main driver architecture.
+
+ - Decide if the CG2900 driver should be a separate driver as today or if it
+ should be a sub-driver using the TI-ST (Shared Transport) driver that is also
+ written for a combo connectivity controller.
+
+ - Decide if cg2900_uart should register on top of hci_ldisc.c (as now) or if it
+ should instead register on top of hci_h4.c thereby reusing hci_h4
+ implementation.
+
+ - Update the hci_ldisc.c so that it will allow drivers to be registered without
+ registering them directly to the Bluetooth stack. Also extend the hci_ldisc.c
+ with more functions to abstract the tty API in a conformative way (currently
+ sometimes the tty API used, sometimes the hci_ldisc interface).
+
+ - Decide if the CG2900 driver should use imported structs and defines to create
+ Bluetooth packets as today or if the Bluetooth stack in the Kernel should be
+ extended so it is possible to use generic functions to send and receive
+ commands and events both from the Bluetooth stack itself and from external
+ drivers such as the CG2900 driver.
diff --git a/drivers/staging/cg2900/bluetooth/Makefile b/drivers/staging/cg2900/bluetooth/Makefile
new file mode 100644
index 0000000..936a4a2
--- /dev/null
+++ b/drivers/staging/cg2900/bluetooth/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for ST-Ericsson CG2900 connectivity combo controller
+#
+
+ccflags-y := \
+ -Idrivers/staging/cg2900/include
+
+obj-$(CONFIG_BT_CG2900) += btcg2900.o
+obj-$(CONFIG_CG2900_UART) += cg2900_uart.o hci_ldisc.o
diff --git a/drivers/staging/cg2900/bluetooth/btcg2900.c b/drivers/staging/cg2900/bluetooth/btcg2900.c
new file mode 100644
index 0000000..2ee724f
--- /dev/null
+++ b/drivers/staging/cg2900/bluetooth/btcg2900.c
@@ -0,0 +1,1203 @@
+/*
+ * Bluetooth driver for ST-Ericsson CG2900 connectivity controller.
+ *
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected])
+ * Henrik Possung ([email protected])
+ * Josef Kindberg ([email protected])
+ * Dariusz Szymszak ([email protected])
+ * Kjell Andersson ([email protected])
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <asm/byteorder.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "cg2900.h"
+
+#define BT_HEADER_LENGTH 0x03
+
+#define STLC2690_HCI_REV 0x0600
+#define CG2900_PG1_HCI_REV 0x0101
+#define CG2900_PG2_HCI_REV 0x0200
+#define CG2900_PG1_SPECIAL_HCI_REV 0x0700
+
+#define NAME "BTCG2900 "
+
+/* Wait for 5 seconds for a response to our requests */
+#define RESP_TIMEOUT 5000
+
+/* Bluetooth error codes */
+#define HCI_ERR_NO_ERROR 0x00
+#define HCI_ERR_CMD_DISALLOWED 0x0C
+
+/**
+ * enum reset_state - RESET-states of the HCI driver.
+ *
+ * @RESET_IDLE: No reset in progress.
+ * @RESET_ACTIVATED: Reset in progress.
+ * @RESET_UNREGISTERED: hdev is unregistered.
+ */
+
+enum reset_state {
+ RESET_IDLE,
+ RESET_ACTIVATED,
+ RESET_UNREGISTERED
+};
+
+/**
+ * enum enable_state - ENABLE-states of the HCI driver.
+ *
+ * @ENABLE_IDLE: The HCI driver is loaded but not opened.
+ * @ENABLE_WAITING_BT_ENABLED_CC: The HCI driver is waiting for a command
+ * complete event from the BT chip as a
+ * response to a BT Enable (true) command.
+ * @ENABLE_BT_ENABLED: The BT chip is enabled.
+ * @ENABLE_WAITING_BT_DISABLED_CC: The HCI driver is waiting for a command
+ * complete event from the BT chip as a
+ * response to a BT Enable (false) command.
+ * @ENABLE_BT_DISABLED: The BT chip is disabled.
+ * @ENABLE_BT_ERROR: The HCI driver is in a bad state, some
+ * thing has failed and is not expected to
+ * work properly.
+ */
+enum enable_state {
+ ENABLE_IDLE,
+ ENABLE_WAITING_BT_ENABLED_CC,
+ ENABLE_BT_ENABLED,
+ ENABLE_WAITING_BT_DISABLED_CC,
+ ENABLE_BT_DISABLED,
+ ENABLE_BT_ERROR
+};
+
+/* Defines which state the driver has when BT is active */
+#define BTCG2900_ACTIVE_STATE ENABLE_BT_ENABLED
+
+/**
+ * struct btcg2900_info - Specifies HCI driver private data.
+ *
+ * This type specifies CG2900 HCI driver private data.
+ *
+ * @list: list_head struct.
+ * @parent: Parent to this BT device. All BT channels will have
+ * common parent.
+ * @cmd: Device structure for BT command channel.
+ * @evt: Device structure for BT event channel.
+ * @acl: Device structure for BT ACL channel.
+ * @pdev: Device structure for platform device.
+ * @hdev: Device structure for HCI device.
+ * @reset_state: Device enum for HCI driver reset state.
+ * @enable_state: Device enum for HCI driver BT enable state.
+ */
+struct btcg2900_info {
+ struct list_head list;
+ struct device *parent;
+ struct device *cmd;
+ struct device *evt;
+ struct device *acl;
+ struct hci_dev *hdev;
+ enum reset_state reset_state;
+ enum enable_state enable_state;
+};
+
+/**
+ * struct enable_info - Specifies data for sending enable commands.
+ *
+ * @enable: True if command should enable the functionality.
+ * @name: Name of the command, only informative.
+ * @get_cmd: Function for retrieving command.
+ * @success: State to set upon success.
+ * @awaiting_cc: State to set while waiting for response.
+ * @failed: State to set upon failure.
+ */
+struct enable_info {
+ bool enable;
+ char *name;
+ struct sk_buff* (*get_cmd)(struct btcg2900_info *info, bool enable);
+ enum enable_state success;
+ enum enable_state awaiting_cc;
+ enum enable_state failed;
+};
+
+/**
+ * struct dev_info - Specifies private data used when receiving callbacks from CG2900 driver.
+ *
+ * @hci_data_type: Type of data according to BlueZ.
+ */
+struct dev_info {
+ u8 hci_data_type;
+};
+
+/* Defines for vs_bt_enable_cmd */
+#define BT_VS_BT_ENABLE 0xFF10
+#define VS_BT_DISABLE 0x00
+#define VS_BT_ENABLE 0x01
+
+/**
+ * struct vs_bt_enable_cmd - Specifies HCI VS Bluetooth_Enable command.
+ *
+ * @op_code: HCI command op code.
+ * @len: Parameter length of command.
+ * @enable: 0 for disable BT, 1 for enable BT.
+ */
+struct vs_bt_enable_cmd {
+ __le16 op_code;
+ u8 len;
+ u8 enable;
+} __packed;
+
+/*
+ * hci_wait_queue - Main Wait Queue in HCI driver.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(hci_wait_queue);
+
+/*
+ * btcg2900_devices - List of active CG2900 BT devices.
+ */
+static LIST_HEAD(btcg2900_devices);
+
+/* Internal function declarations */
+static int register_bluetooth(struct btcg2900_info *info);
+
+/* Internal functions */
+
+/**
+ * get_bt_enable_cmd() - Get HCI BT enable command.
+ * @info: Device info structure.
+ * @bt_enable: true if Bluetooth IP shall be enabled, false otherwise.
+ *
+ * Returns:
+ * NULL if no command shall be sent,
+ * sk_buffer with command otherwise.
+ */
+static struct sk_buff *get_bt_enable_cmd(struct btcg2900_info *info,
+ bool bt_enable)
+{
+ struct sk_buff *skb;
+ struct vs_bt_enable_cmd *cmd;
+ struct cg2900_rev_data rev_data;
+ struct cg2900_user_data *pf_data;
+
+ pf_data = dev_get_platdata(info->cmd);
+
+ if (!pf_data->get_local_revision(pf_data, &rev_data)) {
+ BT_ERR(NAME "Couldn't get revision");
+ return NULL;
+ }
+
+ /* If connected chip does not support the command return NULL */
+ if (CG2900_PG1_SPECIAL_HCI_REV != rev_data.revision &&
+ CG2900_PG1_HCI_REV != rev_data.revision &&
+ CG2900_PG2_HCI_REV != rev_data.revision)
+ return NULL;
+
+ /* CG2900 used */
+ skb = pf_data->alloc_skb(sizeof(*cmd), GFP_KERNEL);
+ if (!skb) {
+ BT_ERR(NAME "Could not allocate skb");
+ return NULL;
+ }
+
+ cmd = (struct vs_bt_enable_cmd *)skb_put(skb, sizeof(*cmd));
+ cmd->op_code = cpu_to_le16(BT_VS_BT_ENABLE);
+ cmd->len = sizeof(*cmd) - BT_HEADER_LENGTH;
+ if (bt_enable)
+ cmd->enable = VS_BT_ENABLE;
+ else
+ cmd->enable = VS_BT_DISABLE;
+
+ return skb;
+}
+
+/**
+ * close_bt_users() - Close all BT channels.
+ * @info: HCI driver info structure.
+ */
+static void close_bt_users(struct btcg2900_info *info)
+{
+ struct cg2900_user_data *pf_data;
+
+ pf_data = dev_get_platdata(info->cmd);
+ if (pf_data->opened)
+ pf_data->close(pf_data);
+
+ pf_data = dev_get_platdata(info->acl);
+ if (pf_data->opened)
+ pf_data->close(pf_data);
+
+ pf_data = dev_get_platdata(info->evt);
+ if (pf_data->opened)
+ pf_data->close(pf_data);
+}
+
+/**
+ * handle_bt_enable_comp() - Handle received BtEnable Complete event.
+ * @info: Info structure.
+ * @skb: Buffer with data coming from device.
+ *
+ * Returns:
+ * true if data has been handled internally,
+ * false otherwise.
+ */
+static bool handle_bt_enable_comp(struct btcg2900_info *info, u8 status)
+{
+ if (info->enable_state != ENABLE_WAITING_BT_ENABLED_CC &&
+ info->enable_state != ENABLE_WAITING_BT_DISABLED_CC)
+ return false;
+ /*
+ * This is the command complete event for
+ * the HCI_Cmd_VS_Bluetooth_Enable.
+ * Check result and update state.
+ *
+ * The BT chip is enabled/disabled. Either it was enabled/
+ * disabled now (status NO_ERROR) or it was already enabled/
+ * disabled (assuming status CMD_DISALLOWED is already enabled/
+ * disabled).
+ */
+ if (status != HCI_ERR_NO_ERROR && status != HCI_ERR_CMD_DISALLOWED) {
+ BT_ERR(NAME "Could not enable/disable BT core (0x%X)",
+ status);
+ BT_DBG("New enable_state: ENABLE_BT_ERROR");
+ info->enable_state = ENABLE_BT_ERROR;
+ goto finished;
+ }
+
+ if (info->enable_state == ENABLE_WAITING_BT_ENABLED_CC) {
+ BT_DBG("New enable_state: ENABLE_BT_ENABLED");
+ info->enable_state = ENABLE_BT_ENABLED;
+ BT_INFO("CG2900 BT core is enabled");
+ } else {
+ BT_DBG("New enable_state: ENABLE_BT_DISABLED");
+ info->enable_state = ENABLE_BT_DISABLED;
+ BT_INFO("CG2900 BT core is disabled");
+ }
+
+finished:
+ /* Wake up whoever is waiting for this result. */
+ wake_up_all(&hci_wait_queue);
+ return true;
+}
+
+/**
+ * handle_bt_enable_stat() - Handle received BtEnable Status event.
+ * @info: Info structure.
+ * @skb: Buffer with data coming from device.
+ *
+ * Returns:
+ * true if data has been handled internally,
+ * false otherwise.
+ */
+static bool handle_bt_enable_stat(struct btcg2900_info *info, u8 status)
+{
+ if (info->enable_state != ENABLE_WAITING_BT_DISABLED_CC &&
+ info->enable_state != ENABLE_WAITING_BT_ENABLED_CC)
+ return false;
+
+ BT_DBG("HCI Driver received Command Status (BT enable): 0x%X", status);
+ /*
+ * This is the command status event for the HCI_Cmd_VS_Bluetooth_Enable.
+ * Just free the packet.
+ */
+ return true;
+}
+
+/**
+ * handle_rx_evt() - Check if received data is response to internal command.
+ * @info: Info structure.
+ * @skb: Buffer with data coming from device.
+ *
+ * Returns:
+ * true if data has been handled internally,
+ * false otherwise.
+ */
+static bool handle_rx_evt(struct btcg2900_info *info, struct sk_buff *skb)
+{
+ struct hci_event_hdr *evt = (struct hci_event_hdr *)skb->data;
+ struct hci_ev_cmd_complete *cmd_complete;
+ struct hci_ev_cmd_status *cmd_status;
+ u16 op_code;
+ u8 status;
+ bool pkt_handled = false;
+
+ /* If BT is active no internal packets shall be generated */
+ if (info->enable_state == BTCG2900_ACTIVE_STATE)
+ return false;
+
+ if (evt->evt == HCI_EV_CMD_COMPLETE) {
+ cmd_complete = (struct hci_ev_cmd_complete *)(evt + 1);
+ status = *((u8 *)(cmd_complete + 1));
+ op_code = le16_to_cpu(cmd_complete->opcode);
+
+ if (op_code == BT_VS_BT_ENABLE)
+ pkt_handled = handle_bt_enable_comp(info, status);
+ } else if (evt->evt == HCI_EV_CMD_STATUS) {
+ cmd_status = (struct hci_ev_cmd_status *)(evt + 1);
+ op_code = le16_to_cpu(cmd_status->opcode);
+ status = cmd_status->status;
+
+ if (op_code == BT_VS_BT_ENABLE)
+ pkt_handled = handle_bt_enable_stat(info, status);
+ }
+
+ if (pkt_handled)
+ kfree_skb(skb);
+
+ return pkt_handled;
+}
+
+/**
+ * hci_read_cb() - Callback for handling data received from CG2900 driver.
+ * @dev: Device receiving data.
+ * @skb: Buffer with data coming from device.
+ */
+static void hci_read_cb(struct cg2900_user_data *user, struct sk_buff *skb)
+{
+ int err = 0;
+ struct dev_info *dev_info;
+ struct btcg2900_info *info;
+
+ dev_info = cg2900_get_usr(user);
+ info = dev_get_drvdata(user->dev);
+
+ if (user->dev != info->evt || !handle_rx_evt(info, skb)) {
+ bt_cb(skb)->pkt_type = dev_info->hci_data_type;
+ skb->dev = (struct net_device *)info->hdev;
+ /* Update BlueZ stats */
+ info->hdev->stat.byte_rx += skb->len;
+ if (bt_cb(skb)->pkt_type == HCI_ACLDATA_PKT)
+ info->hdev->stat.acl_rx++;
+ else
+ info->hdev->stat.evt_rx++;
+
+ BT_DBG("Data receive %d bytes", skb->len);
+
+ /* Provide BlueZ with received frame*/
+ err = hci_recv_frame(skb);
+ /* If err, skb have been freed in hci_recv_frame() */
+ if (err)
+ BT_ERR(NAME "Failed in supplying packet to Bluetooth"
+ " stack (%d)", err);
+ }
+}
+
+/**
+ * hci_reset_cb() - Callback for handling reset from CG2900 driver.
+ * @dev: CPD device resetting.
+ */
+static void hci_reset_cb(struct cg2900_user_data *dev)
+{
+ int err;
+ struct btcg2900_info *info;
+ struct cg2900_user_data *pf_data;
+
+ BT_INFO(NAME "hci_reset_cb");
+
+ info = dev_get_drvdata(dev->dev);
+
+ BT_DBG("New reset_state: RESET_ACTIVATED");
+ info->reset_state = RESET_ACTIVATED;
+
+ /*
+ * Continue to deregister hdev if all channels has been reset else
+ * return.
+ */
+ pf_data = dev_get_platdata(info->acl);
+ if (pf_data->opened)
+ return;
+ pf_data = dev_get_platdata(info->cmd);
+ if (pf_data->opened)
+ return;
+ pf_data = dev_get_platdata(info->evt);
+ if (pf_data->opened)
+ return;
+
+ /*
+ * Deregister HCI device. Close and Destruct functions should
+ * in turn be called by BlueZ.
+ */
+ BT_DBG("Deregister HCI device");
+ err = hci_unregister_dev(info->hdev);
+ if (err)
+ BT_ERR(NAME "Can not deregister HCI device! (%d)", err);
+ /*
+ * Now we are in trouble. Try to register a new hdev
+ * anyway even though this will cost some memory.
+ */
+
+ wait_event_timeout(hci_wait_queue,
+ (RESET_UNREGISTERED == info->reset_state),
+ msecs_to_jiffies(RESP_TIMEOUT));
+ if (RESET_UNREGISTERED != info->reset_state)
+ /*
+ * Now we are in trouble. Try to register a new hdev
+ * anyway even though this will cost some memory.
+ */
+ BT_ERR(NAME "Timeout expired. Could not deregister HCI device");
+
+ /* Init and register hdev */
+ BT_DBG("Register HCI device");
+ err = register_bluetooth(info);
+ if (err)
+ BT_ERR(NAME "HCI Device registration error (%d)", err);
+}
+
+/**
+ * send_enable_cmd() - Send a command with only enable/disable functionality.
+ * @info: Info structure.
+ * @en_info: Enable info structure.
+ *
+ * Returns:
+ * 0 if successful,
+ * -EACCES if correct response to command is not received,
+ * Error codes from CG2900 write.
+ */
+static int send_enable_cmd(struct btcg2900_info *info,
+ struct enable_info *en_info)
+{
+ struct sk_buff *enable_cmd;
+ int err;
+ struct cg2900_user_data *pf_data;
+
+ /*
+ * Call function that returns the chip dependent enable HCI command.
+ * If NULL is returned, then no bt_enable command should be sent to the
+ * chip.
+ */
+ enable_cmd = en_info->get_cmd(info, en_info->enable);
+ if (!enable_cmd) {
+ BT_DBG("%s New enable_state: %d", en_info->name,
+ en_info->success);
+ info->enable_state = en_info->success;
+ return 0;
+ }
+
+ /* Set the HCI state before sending command to chip. */
+ BT_DBG("%s New enable_state: %d", en_info->name, en_info->awaiting_cc);
+ info->enable_state = en_info->awaiting_cc;
+
+ /* Send command to chip */
+ pf_data = dev_get_platdata(info->cmd);
+ err = pf_data->write(pf_data, enable_cmd);
+ if (err) {
+ BT_ERR("Couldn't send %s command (%d)", en_info->name, err);
+ kfree_skb(enable_cmd);
+ info->enable_state = en_info->failed;
+ return err;
+ }
+
+ /*
+ * Wait for callback to receive command complete and then wake us up
+ * again.
+ */
+ wait_event_timeout(hci_wait_queue,
+ info->enable_state == en_info->success,
+ msecs_to_jiffies(RESP_TIMEOUT));
+ /* Check the current state to see if it worked */
+ if (info->enable_state != en_info->success) {
+ BT_ERR("Could not change %s state (%d)",
+ en_info->name, info->enable_state);
+ BT_DBG("%s New enable_state: %d", en_info->name,
+ en_info->failed);
+ info->enable_state = en_info->failed;
+ return -EACCES;
+ }
+
+ return 0;
+}
+
+/**
+ * btcg2900_open() - Open HCI interface.
+ * @hdev: HCI device being opened.
+ *
+ * BlueZ callback function for opening HCI interface to device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if NULL pointer is supplied.
+ * -EOPNOTSUPP if supplied packet type is not supported.
+ * -EBUSY if device is already opened.
+ * -EACCES if opening of channels failed.
+ */
+static int btcg2900_open(struct hci_dev *hdev)
+{
+ struct btcg2900_info *info;
+ struct cg2900_user_data *pf_data;
+ int err;
+ struct enable_info en_info;
+
+ BT_INFO("Open ST-Ericsson CG2900 driver");
+
+ if (!hdev) {
+ BT_ERR(NAME "NULL supplied for hdev");
+ return -EINVAL;
+ }
+
+ info = (struct btcg2900_info *)hdev->driver_data;
+ if (!info) {
+ BT_ERR(NAME "NULL supplied for driver_data");
+ return -EINVAL;
+ }
+
+ if (test_and_set_bit(HCI_RUNNING, &(hdev->flags))) {
+ BT_ERR(NAME "Device already opened!");
+ return -EBUSY;
+ }
+
+ pf_data = dev_get_platdata(info->acl);
+ err = pf_data->open(pf_data);
+ if (err) {
+ BT_ERR("Couldn't open BT ACL channel (%d)", err);
+ goto handle_error;
+ }
+
+ pf_data = dev_get_platdata(info->cmd);
+ err = pf_data->open(pf_data);
+ if (err) {
+ BT_ERR("Couldn't open BT CMD channel (%d)", err);
+ goto handle_error;
+ }
+
+ pf_data = dev_get_platdata(info->evt);
+ err = pf_data->open(pf_data);
+ if (err) {
+ BT_ERR("Couldn't open BT EVT channel (%d)", err);
+ goto handle_error;
+ }
+
+ if (info->reset_state == RESET_ACTIVATED) {
+ BT_DBG("New reset_state: RESET_IDLE");
+ info->reset_state = RESET_IDLE;
+ }
+
+ /* First enable the BT core */
+ en_info.enable = true;
+ en_info.get_cmd = get_bt_enable_cmd;
+ en_info.name = "VS BT Enable (true)";
+ en_info.success = ENABLE_BT_ENABLED;
+ en_info.awaiting_cc = ENABLE_WAITING_BT_ENABLED_CC;
+ en_info.failed = ENABLE_BT_DISABLED;
+
+ err = send_enable_cmd(info, &en_info);
+ if (err) {
+ BT_ERR("Couldn't enable BT core (%d)", err);
+ goto handle_error;
+ }
+
+ return 0;
+
+handle_error:
+ close_bt_users(info);
+ clear_bit(HCI_RUNNING, &(hdev->flags));
+ return err;
+
+}
+
+/**
+ * btcg2900_close() - Close HCI interface.
+ * @hdev: HCI device being closed.
+ *
+ * BlueZ callback function for closing HCI interface.
+ * It flushes the interface first.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if NULL pointer is supplied.
+ * -EOPNOTSUPP if supplied packet type is not supported.
+ * -EBUSY if device is not opened.
+ */
+static int btcg2900_close(struct hci_dev *hdev)
+{
+ struct btcg2900_info *info = NULL;
+ int err;
+ struct enable_info en_info;
+
+ BT_DBG("btcg2900_close");
+
+ if (!hdev) {
+ BT_ERR(NAME "NULL supplied for hdev");
+ return -EINVAL;
+ }
+
+ info = (struct btcg2900_info *)hdev->driver_data;
+ if (!info) {
+ BT_ERR(NAME "NULL supplied for driver_data");
+ return -EINVAL;
+ }
+
+ if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags))) {
+ BT_ERR(NAME "Device already closed!");
+ return -EBUSY;
+ }
+
+ /* Do not do this if there is an reset ongoing */
+ if (info->reset_state == RESET_ACTIVATED)
+ goto remove_users;
+
+ /* Now disable the BT core */
+ en_info.enable = false;
+ en_info.get_cmd = get_bt_enable_cmd;
+ en_info.name = "VS BT Enable (false)";
+ en_info.success = ENABLE_BT_DISABLED;
+ en_info.awaiting_cc = ENABLE_WAITING_BT_DISABLED_CC;
+ en_info.failed = ENABLE_BT_ENABLED;
+
+ err = send_enable_cmd(info, &en_info);
+ if (err)
+ BT_ERR("Couldn't disable BT core (%d)", err);
+
+remove_users:
+ /* Finally deregister all users and free allocated data */
+ close_bt_users(info);
+ return 0;
+}
+
+/**
+ * btcg2900_send() - Send packet to device.
+ * @skb: sk buffer to be sent.
+ *
+ * BlueZ callback function for sending sk buffer.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if NULL pointer is supplied.
+ * -EOPNOTSUPP if supplied packet type is not supported.
+ * Error codes from cg2900_write.
+ */
+static int btcg2900_send(struct sk_buff *skb)
+{
+ struct hci_dev *hdev;
+ struct btcg2900_info *info;
+ struct cg2900_user_data *pf_data;
+ int err = 0;
+
+ if (!skb) {
+ BT_ERR(NAME "NULL supplied for skb");
+ return -EINVAL;
+ }
+
+ hdev = (struct hci_dev *)(skb->dev);
+ if (!hdev) {
+ BT_ERR(NAME "NULL supplied for hdev");
+ return -EINVAL;
+ }
+
+ info = (struct btcg2900_info *)hdev->driver_data;
+ if (!info) {
+ BT_ERR(NAME "NULL supplied for info");
+ return -EINVAL;
+ }
+
+ /* Update BlueZ stats */
+ hdev->stat.byte_tx += skb->len;
+
+ BT_DBG("Data transmit %d bytes", skb->len);
+
+ switch (bt_cb(skb)->pkt_type) {
+ case HCI_COMMAND_PKT:
+ BT_DBG("Sending HCI_COMMAND_PKT");
+ pf_data = dev_get_platdata(info->cmd);
+ err = pf_data->write(pf_data, skb);
+ hdev->stat.cmd_tx++;
+ break;
+ case HCI_ACLDATA_PKT:
+ BT_DBG("Sending HCI_ACLDATA_PKT");
+ pf_data = dev_get_platdata(info->acl);
+ err = pf_data->write(pf_data, skb);
+ hdev->stat.acl_tx++;
+ break;
+ default:
+ BT_ERR(NAME "Trying to transmit unsupported packet type"
+ " (0x%.2X)", bt_cb(skb)->pkt_type);
+ err = -EOPNOTSUPP;
+ break;
+ };
+
+ return err;
+}
+
+/**
+ * btcg2900_destruct() - Destruct HCI interface.
+ * @hdev: HCI device being destructed.
+ */
+static void btcg2900_destruct(struct hci_dev *hdev)
+{
+ struct btcg2900_info *info;
+
+ BT_DBG("btcg2900_destruct");
+
+ info = hdev->driver_data;
+ if (!info) {
+ BT_ERR(NAME "NULL supplied for info");
+ return;
+ }
+
+ /*
+ * When destruct is called it means that the Bluetooth stack is done
+ * with the HCI device and we can now free it.
+ * Normally we do this only when removing the whole module through
+ * btcg2900_remove(), but when being reset we free the device here and
+ * we then set the reset state so that the reset handler can allocate a
+ * new HCI device and then register it to the Bluetooth stack.
+ */
+ if (info->reset_state == RESET_ACTIVATED) {
+ if (info->hdev) {
+ hci_free_dev(info->hdev);
+ info->hdev = NULL;
+ }
+ BT_DBG("New reset_state: RESET_UNREGISTERED");
+ info->reset_state = RESET_UNREGISTERED;
+ wake_up_all(&hci_wait_queue);
+ }
+}
+
+/**
+ * get_info() - Return info structure for this device.
+ * @dev: Current device.
+ *
+ * Returns:
+ * Pointer to info struct if there is no error.
+ * ERR_PTR(-ENOMEM) if allocation fails.
+ */
+static struct btcg2900_info *get_info(struct device *dev)
+{
+ struct list_head *cursor;
+ struct btcg2900_info *tmp;
+ struct btcg2900_info *info = NULL;
+
+ /* Find the info structure */
+ list_for_each(cursor, &btcg2900_devices) {
+ tmp = list_entry(cursor, struct btcg2900_info, list);
+ if (tmp->parent == dev->parent) {
+ info = tmp;
+ break;
+ }
+ }
+
+ if (info)
+ return info;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ BT_ERR("Could not allocate info struct");
+ return ERR_PTR(-ENOMEM);
+ }
+ info->parent = dev->parent;
+ list_add_tail(&info->list, &btcg2900_devices);
+ BT_DBG("CG2900 device added");
+ return info;
+}
+
+/**
+ * device_removed() - Remove device from list if there are no channels left.
+ * @info: BTCG2900 info structure.
+ */
+static void device_removed(struct btcg2900_info *info)
+{
+ struct list_head *cursor;
+ struct btcg2900_info *tmp;
+
+ if (info->acl || info->cmd || info->evt)
+ /* There are still devices active */
+ return;
+
+ /* Find the info structure and delete it */
+ list_for_each(cursor, &btcg2900_devices) {
+ tmp = list_entry(cursor, struct btcg2900_info, list);
+ if (tmp == info) {
+ list_del(cursor);
+ break;
+ }
+ }
+ kfree(info);
+ BT_DBG("CG2900 device removed");
+}
+
+/**
+ * register_bluetooth() - Initialize module.
+ *
+ * Alloc, init, and register HCI device to BlueZ.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if allocation fails.
+ * Error codes from hci_register_dev.
+ */
+static int register_bluetooth(struct btcg2900_info *info)
+{
+ int err;
+ struct cg2900_user_data *pf_data;
+
+ /* Check if all channels have been probed */
+ if (!info->acl || !info->cmd || !info->evt)
+ return 0;
+
+ pf_data = dev_get_platdata(info->cmd);
+
+ info->hdev = hci_alloc_dev();
+ if (!info->hdev) {
+ BT_ERR("Could not allocate mem for CG2900 BT driver");
+ return -ENOMEM;
+ }
+
+ SET_HCIDEV_DEV(info->hdev, info->parent);
+ info->hdev->bus = pf_data->channel_data.bt_bus;
+ info->hdev->driver_data = info;
+ info->hdev->owner = THIS_MODULE;
+ info->hdev->open = btcg2900_open;
+ info->hdev->close = btcg2900_close;
+ info->hdev->send = btcg2900_send;
+ info->hdev->destruct = btcg2900_destruct;
+
+ err = hci_register_dev(info->hdev);
+ if (err) {
+ BT_ERR("Can not register BTCG2900 HCI device (%d)", err);
+ hci_free_dev(info->hdev);
+ info->hdev = NULL;
+ }
+
+ BT_INFO("CG2900 registered");
+
+ BT_DBG("New enable_state: ENABLE_IDLE");
+ info->enable_state = ENABLE_IDLE;
+ BT_DBG("New reset_state: RESET_IDLE");
+ info->reset_state = RESET_IDLE;
+
+ return err;
+}
+
+/**
+ * probe_common() - Initialize channel and register to BT stack.
+ * @dev: Current device.
+ * @info: BTCG2900 info structure.
+ * @hci_data_type: Data type of this channel, e.g. ACL.
+ *
+ * Allocate and initialize private data. Register to Bluetooth stack.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if allocation fails.
+ * Error codes from register_bluetooth.
+ */
+static int probe_common(struct device *dev,
+ struct btcg2900_info *info,
+ u8 hci_data_type)
+{
+ int err;
+ struct cg2900_user_data *pf_data;
+ struct dev_info *dev_info;
+
+ dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
+ if (!dev_info) {
+ BT_ERR("Could not allocate dev_info");
+ return -ENOMEM;
+ }
+
+ dev_set_drvdata(dev, info);
+
+ pf_data = dev_get_platdata(dev);
+ pf_data->dev = dev;
+ pf_data->read_cb = hci_read_cb;
+ pf_data->reset_cb = hci_reset_cb;
+
+ /* Init and register hdev */
+ err = register_bluetooth(info);
+ if (err) {
+ BT_ERR("HCI Device registration error (%d)", err);
+ kfree(dev_info);
+ return err;
+ }
+ dev_info->hci_data_type = hci_data_type;
+ cg2900_set_usr(pf_data, dev_info);
+
+ return 0;
+}
+
+/**
+ * btcg2900_cmd_probe() - Initialize command channel.
+ * @pdev: Platform device.
+ *
+ * Allocate and initialize private data.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from get_info and probe_common.
+ */
+static int __devinit btcg2900_cmd_probe(struct platform_device *pdev)
+{
+ int err;
+ struct btcg2900_info *info;
+
+ BT_DBG("Starting CG2900 Command channel");
+
+ info = get_info(&pdev->dev);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ info->cmd = &pdev->dev;
+
+ err = probe_common(&pdev->dev, info, HCI_COMMAND_PKT);
+ if (err) {
+ BT_ERR("Failed to initialize channel");
+ info->cmd = NULL;
+ device_removed(info);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * btcg2900_acl_probe() - Initialize command channel.
+ * @pdev: Platform device.
+ *
+ * Allocate and initialize private data.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from get_info and probe_common.
+ */
+static int __devinit btcg2900_acl_probe(struct platform_device *pdev)
+{
+ int err;
+ struct btcg2900_info *info;
+
+ BT_DBG("Starting CG2900 ACL channel");
+
+ info = get_info(&pdev->dev);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ info->acl = &pdev->dev;
+
+ err = probe_common(&pdev->dev, info, HCI_ACLDATA_PKT);
+ if (err) {
+ BT_ERR("Failed to initialize channel");
+ info->acl = NULL;
+ device_removed(info);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * btcg2900_evt_probe() - Initialize event channel.
+ * @pdev: Platform device.
+ *
+ * Allocate and initialize private data.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from get_info and probe_common.
+ */
+static int __devinit btcg2900_evt_probe(struct platform_device *pdev)
+{
+ int err;
+ struct btcg2900_info *info;
+
+ BT_DBG("Starting CG2900 Event channel");
+
+ info = get_info(&pdev->dev);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ info->evt = &pdev->dev;
+
+ err = probe_common(&pdev->dev, info, HCI_EVENT_PKT);
+ if (err) {
+ BT_ERR("Failed to initialize channel");
+ info->evt = NULL;
+ device_removed(info);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * remove_common() - Remove channel.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from hci_unregister_dev.
+ */
+static int remove_common(struct device *dev,
+ struct btcg2900_info *info)
+{
+ int err = 0;
+ struct cg2900_user_data *pf_data;
+ struct dev_info *dev_info;
+
+ pf_data = dev_get_platdata(dev);
+ dev_info = cg2900_get_usr(pf_data);
+
+ kfree(dev_info);
+ cg2900_set_usr(pf_data, NULL);
+
+ if (!info->hdev)
+ goto finished;
+
+ BT_INFO("Unregistering CG2900");
+ err = hci_unregister_dev(info->hdev);
+ if (err)
+ BT_ERR("Can not unregister HCI device (%d)", err);
+ hci_free_dev(info->hdev);
+ info->hdev = NULL;
+
+finished:
+ device_removed(info);
+ return err;
+}
+
+/**
+ * btcg2900_cmd_remove() - Remove command channel.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from remove_common.
+ */
+static int __devexit btcg2900_cmd_remove(struct platform_device *pdev)
+{
+ struct btcg2900_info *info;
+
+ BT_DBG("Removing CG2900 Command channel");
+
+ info = dev_get_drvdata(&pdev->dev);
+ info->cmd = NULL;
+ return remove_common(&pdev->dev, info);
+}
+
+/**
+ * btcg2900_acl_remove() - Remove ACL channel.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from remove_common.
+ */
+static int __devexit btcg2900_acl_remove(struct platform_device *pdev)
+{
+ struct btcg2900_info *info;
+
+ BT_DBG("Removing CG2900 ACL channel");
+
+ info = dev_get_drvdata(&pdev->dev);
+ info->acl = NULL;
+ return remove_common(&pdev->dev, info);
+}
+
+/**
+ * btcg2900_evt_remove() - Remove event channel.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from remove_common.
+ */
+static int __devexit btcg2900_evt_remove(struct platform_device *pdev)
+{
+ struct btcg2900_info *info;
+
+ BT_DBG("Removing CG2900 Event channel");
+
+ info = dev_get_drvdata(&pdev->dev);
+ info->evt = NULL;
+ return remove_common(&pdev->dev, info);
+}
+
+static struct platform_driver btcg2900_cmd_driver = {
+ .driver = {
+ .name = "cg2900-btcmd",
+ .owner = THIS_MODULE,
+ },
+ .probe = btcg2900_cmd_probe,
+ .remove = __devexit_p(btcg2900_cmd_remove),
+};
+
+static struct platform_driver btcg2900_acl_driver = {
+ .driver = {
+ .name = "cg2900-btacl",
+ .owner = THIS_MODULE,
+ },
+ .probe = btcg2900_acl_probe,
+ .remove = __devexit_p(btcg2900_acl_remove),
+};
+
+static struct platform_driver btcg2900_evt_driver = {
+ .driver = {
+ .name = "cg2900-btevt",
+ .owner = THIS_MODULE,
+ },
+ .probe = btcg2900_evt_probe,
+ .remove = __devexit_p(btcg2900_evt_remove),
+};
+
+/**
+ * btcg2900_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init btcg2900_init(void)
+{
+ int err;
+
+ BT_DBG("btcg2900_init");
+
+ err = platform_driver_register(&btcg2900_cmd_driver);
+ if (err) {
+ BT_ERR("Failed to register cmd (%d)", err);
+ return err;
+ }
+ err = platform_driver_register(&btcg2900_acl_driver);
+ if (err) {
+ BT_ERR("Failed to register acl (%d)", err);
+ return err;
+ }
+ err = platform_driver_register(&btcg2900_evt_driver);
+ if (err) {
+ BT_ERR("Failed to register evt (%d)", err);
+ return err;
+ }
+ return err;
+}
+
+/**
+ * btcg2900_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit btcg2900_exit(void)
+{
+ BT_DBG("btcg2900_exit");
+ platform_driver_unregister(&btcg2900_cmd_driver);
+ platform_driver_unregister(&btcg2900_acl_driver);
+ platform_driver_unregister(&btcg2900_evt_driver);
+}
+
+module_init(btcg2900_init);
+module_exit(btcg2900_exit);
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_AUTHOR("Henrik Possung ST-Ericsson");
+MODULE_AUTHOR("Josef Kindberg ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux Bluetooth HCI H:4 Driver for ST-Ericsson controller");
diff --git a/drivers/staging/cg2900/bluetooth/cg2900_uart.c b/drivers/staging/cg2900/bluetooth/cg2900_uart.c
new file mode 100644
index 0000000..4417525
--- /dev/null
+++ b/drivers/staging/cg2900/bluetooth/cg2900_uart.c
@@ -0,0 +1,2074 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * Lukasz Rymanowski ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth UART Driver for ST-Ericsson CG2900 connectivity controller.
+ */
+#define NAME "cg2900_uart"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <asm/byteorder.h>
+#include <linux/atomic.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/timer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/tty.h>
+#include <linux/tty_ldisc.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+
+#include "cg2900.h"
+
+#include "hci_uart.h"
+
+#define MAIN_DEV (uart_info->dev)
+
+/* Workqueues' names */
+#define UART_WQ_NAME "cg2900_uart_wq"
+#define UART_NAME "cg2900_uart"
+
+/*
+ * A BT command complete event without any parameters is the defined size plus
+ * 1 byte extra for the status field which is always present in a
+ * command complete event.
+ */
+#define HCI_BT_CMD_COMPLETE_LEN (sizeof(struct hci_ev_cmd_complete) + 1)
+
+/* Timers used in milliseconds */
+#define UART_TX_TIMEOUT 100
+#define UART_RX_TIMEOUT 20
+#define UART_RESP_TIMEOUT 1000
+#define UART_RESUME_TIMEOUT 20
+
+/* Number of bytes to reserve at start of sk_buffer when receiving packet */
+#define RX_SKB_RESERVE 8
+/* Max size of received packet (not including reserved bytes) */
+#define RX_SKB_MAX_SIZE 1024
+
+/* Size of the header in the different packets */
+#define HCI_BT_EVT_HDR_SIZE 2
+#define HCI_BT_ACL_HDR_SIZE 4
+#define HCI_FM_RADIO_HDR_SIZE 1
+#define HCI_GNSS_HDR_SIZE 3
+
+/* Position of length field in the different packets */
+#define HCI_EVT_LEN_POS 2
+#define HCI_ACL_LEN_POS 3
+#define FM_RADIO_LEN_POS 1
+#define GNSS_LEN_POS 2
+
+/* Baud rate defines */
+#define ZERO_BAUD_RATE 0
+#define DEFAULT_BAUD_RATE 115200
+#define HIGH_BAUD_RATE 3000000
+
+#define BT_SIZE_OF_HDR (sizeof(__le16) + sizeof(__u8))
+#define BT_PARAM_LEN(__pkt_len) (__pkt_len - BT_SIZE_OF_HDR)
+
+/* Standardized Bluetooth H:4 channels */
+#define HCI_BT_CMD_H4_CHANNEL 0x01
+#define HCI_BT_ACL_H4_CHANNEL 0x02
+#define HCI_BT_SCO_H4_CHANNEL 0x03
+#define HCI_BT_EVT_H4_CHANNEL 0x04
+
+#define BT_BDADDR_SIZE 6
+
+/* Reserve 1 byte for the HCI H:4 header */
+#define HCI_H4_SIZE 1
+#define CG2900_SKB_RESERVE HCI_H4_SIZE
+
+/* Default H4 channels which may change depending on connected controller */
+#define HCI_FM_RADIO_H4_CHANNEL 0x08
+#define HCI_GNSS_H4_CHANNEL 0x09
+
+/* Bluetooth error codes */
+#define HCI_BT_ERROR_NO_ERROR 0x00
+
+/* Bytes in the command Hci_Cmd_ST_Set_Uart_Baud_Rate */
+#define CG2900_BAUD_RATE_57600 0x03
+#define CG2900_BAUD_RATE_115200 0x02
+#define CG2900_BAUD_RATE_230400 0x01
+#define CG2900_BAUD_RATE_460800 0x00
+#define CG2900_BAUD_RATE_921600 0x20
+#define CG2900_BAUD_RATE_2000000 0x25
+#define CG2900_BAUD_RATE_3000000 0x27
+#define CG2900_BAUD_RATE_4000000 0x2B
+
+/* GNSS */
+struct gnss_hci_hdr {
+ __u8 op_code;
+ __le16 plen;
+} __packed;
+
+/* FM legacy command packet */
+struct fm_leg_cmd {
+ __u8 length;
+ __u8 opcode;
+ __u8 read_write;
+ __u8 fm_function;
+ union { /* Payload varies with function */
+ __le16 irqmask;
+ struct fm_leg_fm_cmd {
+ __le16 head;
+ __le16 data[];
+ } fm_cmd;
+ };
+} __packed;
+
+/* FM legacy command complete packet */
+struct fm_leg_cmd_cmpl {
+ __u8 param_length;
+ __u8 status;
+ __u8 opcode;
+ __u8 read_write;
+ __u8 cmd_status;
+ __u8 fm_function;
+ __le16 response_head;
+ __le16 data[];
+} __packed;
+
+/* FM legacy interrupt packet, PG2 style */
+struct fm_leg_irq_v2 {
+ __u8 param_length;
+ __u8 status;
+ __u8 opcode;
+ __u8 event_type;
+ __u8 event_id;
+ __le16 irq;
+} __packed;
+
+/* FM legacy interrupt packet, PG1 style */
+struct fm_leg_irq_v1 {
+ __u8 param_length;
+ __u8 opcode;
+ __u8 event_id;
+ __le16 irq;
+} __packed;
+
+union fm_leg_evt_or_irq {
+ __u8 param_length;
+ struct fm_leg_cmd_cmpl evt;
+ struct fm_leg_irq_v2 irq_v2;
+ struct fm_leg_irq_v1 irq_v1;
+} __packed;
+
+/* BT VS SetBaudRate command */
+#define CG2900_BT_OP_VS_SET_BAUD_RATE 0xFC09
+struct bt_vs_set_baud_rate_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 baud_rate;
+} __packed;
+
+/**
+ * enum uart_rx_state - UART RX-state for UART.
+ * @W4_PACKET_TYPE: Waiting for packet type.
+ * @W4_EVENT_HDR: Waiting for BT event header.
+ * @W4_ACL_HDR: Waiting for BT ACL header.
+ * @W4_FM_RADIO_HDR: Waiting for FM header.
+ * @W4_GNSS_HDR: Waiting for GNSS header.
+ * @W4_DATA: Waiting for data in rest of the packet (after header).
+ */
+enum uart_rx_state {
+ W4_PACKET_TYPE,
+ W4_EVENT_HDR,
+ W4_ACL_HDR,
+ W4_FM_RADIO_HDR,
+ W4_GNSS_HDR,
+ W4_DATA
+};
+
+/**
+ * enum sleep_state - Sleep-state for UART.
+ * @CHIP_AWAKE: Chip is awake.
+ * @CHIP_FALLING_ASLEEP: Chip is falling asleep.
+ * @CHIP_ASLEEP: Chip is asleep.
+ * @CHIP_SUSPENDED: Chip in suspend state.
+ * @CHIP_RESUMING: Chip is going back from suspend state.
+ * @CHIP_POWERED_DOWN: Chip is off.
+ */
+enum sleep_state {
+ CHIP_AWAKE,
+ CHIP_FALLING_ASLEEP,
+ CHIP_ASLEEP,
+ CHIP_SUSPENDED,
+ CHIP_RESUMING,
+ CHIP_POWERED_DOWN
+};
+
+/**
+ * enum baud_rate_change_state - Baud rate-state for UART.
+ * @BAUD_IDLE: No baud rate change is ongoing.
+ * @BAUD_SENDING_RESET: HCI reset has been sent. Waiting for command complete
+ * event.
+ * @BAUD_START: Set baud rate cmd scheduled for sending.
+ * @BAUD_SENDING: Set baud rate cmd sending in progress.
+ * @BAUD_WAITING: Set baud rate cmd sent, waiting for command complete
+ * event.
+ * @BAUD_SUCCESS: Baud rate change has succeeded.
+ * @BAUD_FAIL: Baud rate change has failed.
+ */
+enum baud_rate_change_state {
+ BAUD_IDLE,
+ BAUD_SENDING_RESET,
+ BAUD_START,
+ BAUD_SENDING,
+ BAUD_WAITING,
+ BAUD_SUCCESS,
+ BAUD_FAIL
+};
+
+/**
+ * struct uart_work_struct - Work structure for UART module.
+ * @work: Work structure.
+ * @data: Pointer to private data.
+ *
+ * This structure is used to pack work for work queue.
+ */
+struct uart_work_struct {
+ struct work_struct work;
+ void *data;
+};
+
+/**
+ * struct uart_delayed_work_struct - Work structure for UART module.
+ * @delayed_work: Work structure.
+ * @data: Pointer to private data.
+ *
+ * This structure is used to pack work for work queue.
+ */
+struct uart_delayed_work_struct {
+ struct delayed_work work;
+ void *data;
+};
+
+/**
+ * struct uart_info - Main UART info structure.
+ * @rx_state: Current RX state.
+ * @rx_count: Number of bytes left to receive.
+ * @rx_skb: SK_buffer to store the received data into.
+ * @tx_queue: TX queue for sending data to chip.
+ * @hu: Hci uart structure.
+ * @wq: UART work queue.
+ * @baud_rate_state: UART baud rate change state.
+ * @baud_rate: Current baud rate setting.
+ * @sleep_state: UART sleep state.
+ * @sleep_work: Delayed sleep work struct.
+ * @wakeup_work: Wake-up work struct.
+ * @restart_sleep_work: Reschedule sleep_work and wake-up work struct.
+ * @sleep_state_lock: Used to protect chip state.
+ * @sleep_allowed: Indicates if tty has functions needed for sleep mode.
+ * @tx_in_progress: Indicates data sending in progress.
+ * @rx_in_progress: Indicates data receiving in progress.
+ * @transmission_lock: Spin_lock to protect tx/rx_in_progress.
+ * @regulator: Regulator.
+ * @regulator_enabled: True if regulator is enabled.
+ * @dev: Pointer to CG2900 uart device.
+ * @chip_dev: Chip device for current UART transport.
+ * @cts_irq: CTS interrupt for this UART.
+ * @cts_gpio: CTS GPIO for this UART.
+ */
+struct uart_info {
+ enum uart_rx_state rx_state;
+ unsigned long rx_count;
+ struct sk_buff *rx_skb;
+ struct sk_buff_head tx_queue;
+
+ struct hci_uart *hu;
+
+ struct workqueue_struct *wq;
+ enum baud_rate_change_state baud_rate_state;
+ int baud_rate;
+ enum sleep_state sleep_state;
+ struct uart_delayed_work_struct sleep_work;
+ struct uart_work_struct wakeup_work;
+ struct uart_work_struct restart_sleep_work;
+ struct mutex sleep_state_lock;
+ bool sleep_allowed;
+ bool tx_in_progress;
+ bool rx_in_progress;
+ spinlock_t transmission_lock;
+ struct regulator *regulator;
+ bool regulator_enabled;
+ struct device *dev;
+ struct cg2900_chip_dev chip_dev;
+ int cts_irq;
+ int cts_gpio;
+};
+
+/* Module parameters */
+static int uart_default_baud = DEFAULT_BAUD_RATE;
+static int uart_high_baud = HIGH_BAUD_RATE;
+static int uart_debug;
+
+static DECLARE_WAIT_QUEUE_HEAD(uart_wait_queue);
+
+static void wake_up_chip(struct uart_info *uart_info);
+
+/**
+ * is_chip_flow_off() - Check if chip has set flow off.
+ * @tty: Pointer to tty.
+ *
+ * Returns:
+ * true - chip flows off.
+ * false - chip flows on.
+ */
+static bool is_chip_flow_off(struct uart_info *uart_info)
+{
+ int lines;
+
+ lines = hci_uart_tiocmget(uart_info->hu);
+
+ if (lines & TIOCM_CTS)
+ return false;
+ else
+ return true;
+}
+
+/**
+ * create_work_item() - Create work item and add it to the work queue.
+ * @uart_info: Main Uart structure.
+ * @work_func: Work function.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EBUSY if not possible to queue work.
+ * -ENOMEM if allocation fails.
+ */
+static int create_work_item(struct uart_info *uart_info,
+ work_func_t work_func)
+{
+ struct uart_work_struct *new_work;
+ int res;
+
+ new_work = kmalloc(sizeof(*new_work), GFP_ATOMIC);
+ if (!new_work) {
+ dev_err(MAIN_DEV,
+ "Failed to alloc memory for uart_work_struct\n");
+ return -ENOMEM;
+ }
+
+ new_work->data = uart_info;
+ INIT_WORK(&new_work->work, work_func);
+
+ res = queue_work(uart_info->wq, &new_work->work);
+ if (!res) {
+ dev_err(MAIN_DEV,
+ "Failed to queue work_struct because it's already "
+ "in the queue\n");
+ kfree(new_work);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+/**
+ * handle_cts_irq() - Called to handle CTS interrupt in work context.
+ * @work: work which needs to be done.
+ *
+ * The handle_cts_irq() function is a work handler called if interrupt on CTS
+ * occurred. It wakes up the transport.
+ */
+static void handle_cts_irq(struct work_struct *work)
+{
+ struct uart_work_struct *current_work =
+ container_of(work, struct uart_work_struct, work);
+ struct uart_info *uart_info = (struct uart_info *)current_work->data;
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+ /* Mark that there is an ongoing transfer. */
+ uart_info->rx_in_progress = true;
+ spin_unlock_bh(&(uart_info->transmission_lock));
+
+ /* Cancel pending sleep work if there is any. */
+ cancel_delayed_work_sync(&uart_info->sleep_work.work);
+
+ mutex_lock(&(uart_info->sleep_state_lock));
+
+ if (uart_info->sleep_state == CHIP_SUSPENDED) {
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_RESUMING\n");
+ uart_info->sleep_state = CHIP_RESUMING;
+ mutex_unlock(&(uart_info->sleep_state_lock));
+ } else {
+ mutex_unlock(&(uart_info->sleep_state_lock));
+ wake_up_chip(uart_info);
+ }
+
+ kfree(current_work);
+}
+
+/**
+ * cts_interrupt() - Called to handle CTS interrupt.
+ * @irq: Interrupt that occurred.
+ * @dev_id: Device ID where interrupt occurred.
+ *
+ * The cts_interrupt() function is called if interrupt on CTS occurred.
+ * It disables the interrupt and starts a new work thread to handle
+ * the interrupt.
+ */
+static irqreturn_t cts_interrupt(int irq, void *dev_id)
+{
+ struct uart_info *uart_info = dev_get_drvdata(dev_id);
+#ifdef CONFIG_PM
+ disable_irq_wake(irq);
+#endif
+ disable_irq_nosync(irq);
+
+ /* Create work and leave IRQ context. */
+ (void)create_work_item(uart_info, handle_cts_irq);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * set_cts_irq() - Enable interrupt on CTS.
+ * @uart_info: Main Uart structure.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from request_irq and disable_uart.
+ */
+static int set_cts_irq(struct uart_info *uart_info)
+{
+ int err;
+ int cts_val = 0;
+
+ /* Set IRQ on CTS. */
+ err = request_irq(uart_info->cts_irq,
+ cts_interrupt,
+ IRQF_TRIGGER_FALLING,
+ UART_NAME,
+ uart_info->dev);
+ if (err) {
+ dev_err(MAIN_DEV, "Could not request CTS IRQ (%d)\n", err);
+ return err;
+ }
+
+ /*
+ * It may happen that there was already an interrupt on CTS just before
+ * the enable_irq() call above. If the CTS line is low now it means that
+ * it's happened, so disable the CTS interrupt and return -ECANCELED.
+ */
+ cts_val = gpio_get_value(uart_info->cts_gpio);
+ if (!cts_val) {
+ dev_dbg(MAIN_DEV, "Missed interrupt, going back to "
+ "awake state\n");
+ free_irq(uart_info->cts_irq, uart_info->dev);
+ return -ECANCELED;
+ }
+
+#ifdef CONFIG_PM
+ enable_irq_wake(uart_info->cts_irq);
+#endif
+ return 0;
+}
+
+/**
+ * disable_uart_pins() - Disable the UART pins.
+ * @uart_info: Main Uart structure.
+ */
+static void disable_uart_pins(struct uart_info *uart_info)
+{
+ struct cg2900_platform_data *pf_data;
+
+ pf_data = dev_get_platdata(uart_info->dev);
+
+ if (pf_data->uart.disable_uart) {
+ int err = pf_data->uart.disable_uart(&uart_info->chip_dev);
+ if (err)
+ dev_err(MAIN_DEV,
+ "Unable to disable UART Hardware (%d)\n", err);
+ }
+}
+
+/**
+ * enable_uart_pins() - Enable the UART pins.
+ * @uart_info: Main Uart structure.
+ */
+static void enable_uart_pins(struct uart_info *uart_info)
+{
+ struct cg2900_platform_data *pf_data;
+
+ pf_data = dev_get_platdata(uart_info->dev);
+
+ if (pf_data->uart.enable_uart) {
+ int err = pf_data->uart.enable_uart(&uart_info->chip_dev);
+ if (err)
+ dev_err(MAIN_DEV,
+ "Unable to enable UART Hardware (%d)\n", err);
+ }
+}
+
+/**
+ * unset_cts_irq() - Disable interrupt on CTS.
+ * @uart_info: Main Uart structure.
+ */
+static void unset_cts_irq(struct uart_info *uart_info)
+{
+ /* Free CTS interrupt */
+ free_irq(uart_info->cts_irq, uart_info->dev);
+}
+
+/**
+ * get_sleep_timeout() - Get sleep timeout.
+ * @uart_info: Main Uart structure.
+ *
+ * Check all conditions for sleep and return sleep timeout.
+ * Return:
+ * 0: sleep not allowed.
+ * other: Timeout value in ms.
+ */
+static unsigned long get_sleep_timeout(struct uart_info *uart_info)
+{
+ unsigned long timeout_jiffies = cg2900_get_sleep_timeout();
+
+ if (timeout_jiffies &&
+ uart_info->hu &&
+ uart_info->hu->fd &&
+ uart_info->sleep_allowed)
+ return timeout_jiffies;
+
+ return 0;
+}
+
+/**
+ * work_wake_up_chip() - Called to wake up of the transport in work context.
+ * @work: work which needs to be done.
+ */
+static void work_wake_up_chip(struct work_struct *work)
+{
+ struct uart_work_struct *current_work =
+ container_of(work, struct uart_work_struct, work);
+ struct uart_info *uart_info = (struct uart_info *)current_work->data;
+
+ wake_up_chip(uart_info);
+}
+
+/**
+ * wake_up_chip() - Wakes up the chip and transport.
+ * @work: pointer to a work struct if the function was called that way.
+ *
+ * Depending on the current sleep state it may wake up the transport.
+ */
+static void wake_up_chip(struct uart_info *uart_info)
+{
+ unsigned long timeout_jiffies = get_sleep_timeout(uart_info);
+
+ /* Resuming state is special. Need to get back chip to awake state. */
+ if (!timeout_jiffies && uart_info->sleep_state != CHIP_RESUMING)
+ return;
+
+ mutex_lock(&(uart_info->sleep_state_lock));
+
+ /*
+ * If chip is powered down we cannot wake it up here. It has to be woken
+ * up through a call to uart_set_chip_power()
+ */
+ if (CHIP_POWERED_DOWN == uart_info->sleep_state)
+ goto finished;
+
+ /*
+ * This function indicates data is transmitted.
+ * Therefore see to that the chip is awake.
+ */
+ if (CHIP_AWAKE == uart_info->sleep_state)
+ goto finished;
+
+ if (CHIP_ASLEEP == uart_info->sleep_state ||
+ CHIP_RESUMING == uart_info->sleep_state) {
+ /* Wait before disabling IRQ */
+ schedule_timeout_killable(
+ msecs_to_jiffies(UART_RESUME_TIMEOUT));
+
+ /* Disable IRQ only when it was enabled. */
+ unset_cts_irq(uart_info);
+ (void)hci_uart_set_baudrate(uart_info->hu,
+ uart_info->baud_rate);
+
+ enable_uart_pins(uart_info);
+
+ /*
+ * Wait before flowing on. Otherwise UART might not be ready in
+ * time
+ */
+ schedule_timeout_killable(
+ msecs_to_jiffies(UART_RESUME_TIMEOUT));
+
+ /* Set FLOW on. */
+ hci_uart_flow_ctrl(uart_info->hu, FLOW_ON);
+ }
+
+ /* Unset BREAK. */
+ dev_dbg(MAIN_DEV, "wake_up_chip: Clear break\n");
+ hci_uart_set_break(uart_info->hu, BREAK_OFF);
+
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_AWAKE\n");
+ uart_info->sleep_state = CHIP_AWAKE;
+
+finished:
+ mutex_unlock(&(uart_info->sleep_state_lock));
+}
+
+/**
+ * set_chip_sleep_mode() - Put the chip and transport to sleep mode.
+ * @work: pointer to work_struct.
+ *
+ * The set_chip_sleep_mode() function is called if there are no ongoing data
+ * transmissions. It tries to put the chip in sleep mode.
+ *
+ */
+static void set_chip_sleep_mode(struct work_struct *work)
+{
+ int err = 0;
+ struct delayed_work *delayed_work =
+ container_of(work, struct delayed_work, work);
+ struct uart_delayed_work_struct *current_work = container_of(
+ delayed_work, struct uart_delayed_work_struct, work);
+ struct uart_info *uart_info = (struct uart_info *)current_work->data;
+ unsigned long timeout_jiffies = get_sleep_timeout(uart_info);
+ int chars_in_buffer;
+
+ if (!timeout_jiffies)
+ return;
+
+ if (uart_info->tx_in_progress || uart_info->rx_in_progress) {
+ dev_dbg(MAIN_DEV, "Not going to sleep, TX/RX in progress\n");
+ return;
+ }
+
+ mutex_lock(&(uart_info->sleep_state_lock));
+
+ switch (uart_info->sleep_state) {
+ case CHIP_FALLING_ASLEEP:
+ if (!is_chip_flow_off(uart_info)) {
+ dev_dbg(MAIN_DEV, "Chip flow is on, it's not ready to"
+ "sleep yet\n");
+ goto schedule_sleep_work;
+ }
+
+ /* Flow OFF. */
+ hci_uart_flow_ctrl(uart_info->hu, FLOW_OFF);
+
+ disable_uart_pins(uart_info);
+
+ /*
+ * Set baud zero.
+ * This cause shut off UART clock as well.
+ */
+ (void)hci_uart_set_baudrate(uart_info->hu,
+ ZERO_BAUD_RATE);
+ err = set_cts_irq(uart_info);
+ if (err < 0) {
+ enable_uart_pins(uart_info);
+ (void)hci_uart_set_baudrate(uart_info->hu,
+ uart_info->baud_rate);
+ hci_uart_flow_ctrl(uart_info->hu, FLOW_ON);
+ hci_uart_set_break(uart_info->hu, BREAK_OFF);
+
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_AWAKE\n");
+ uart_info->sleep_state = CHIP_AWAKE;
+
+ if (err == -ECANCELED)
+ goto finished;
+ else {
+ dev_err(MAIN_DEV, "Can not set interrupt on "
+ "CTS, err:%d\n", err);
+ goto error;
+ }
+ }
+
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_ASLEEP\n");
+ uart_info->sleep_state = CHIP_ASLEEP;
+ break;
+ case CHIP_AWAKE:
+ chars_in_buffer = hci_uart_chars_in_buffer(uart_info->hu);
+ if (chars_in_buffer) {
+ dev_dbg(MAIN_DEV, "sleep_timer_expired: "
+ "tx not finished, stay awake and "
+ "restart the sleep timer\n");
+ goto schedule_sleep_work;
+ }
+
+ dev_dbg(MAIN_DEV, "sleep_timer_expired: Set break\n");
+ hci_uart_set_break(uart_info->hu, BREAK_ON);
+
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_FALLING_ASLEEP\n");
+ uart_info->sleep_state = CHIP_FALLING_ASLEEP;
+ goto schedule_sleep_work;
+
+ case CHIP_POWERED_DOWN:
+ case CHIP_SUSPENDED:
+ case CHIP_ASLEEP: /* Fallthrough. */
+ default:
+ dev_dbg(MAIN_DEV,
+ "Chip sleeps, is suspended or powered down\n");
+ break;
+ }
+
+ mutex_unlock(&(uart_info->sleep_state_lock));
+
+ return;
+
+finished:
+ mutex_unlock(&(uart_info->sleep_state_lock));
+ return;
+schedule_sleep_work:
+ mutex_unlock(&(uart_info->sleep_state_lock));
+ if (timeout_jiffies)
+ queue_delayed_work(uart_info->wq, &uart_info->sleep_work.work,
+ timeout_jiffies);
+ return;
+error:
+ /* Disable sleep mode.*/
+ dev_err(MAIN_DEV, "Disable sleep mode\n");
+ uart_info->sleep_allowed = false;
+ mutex_unlock(&(uart_info->sleep_state_lock));
+}
+
+#ifdef CONFIG_PM
+/**
+ * cg2900_uart_suspend() - Called by Linux PM to put the device in a low power mode.
+ * @pdev: Pointer to platform device.
+ * @state: New state.
+ *
+ * In UART case, CG2900 driver does nothing on suspend.
+ *
+ * Returns:
+ * 0 - Success.
+ */
+static int cg2900_uart_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ int err = 0;
+ struct uart_info *uart_info = dev_get_drvdata(&pdev->dev);
+
+ mutex_lock(&(uart_info->sleep_state_lock));
+
+ if (uart_info->sleep_state == CHIP_POWERED_DOWN)
+ goto finished;
+
+ if (uart_info->sleep_state != CHIP_ASLEEP) {
+ err = -EBUSY;
+ goto finished;
+ }
+
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_SUSPENDED\n");
+ uart_info->sleep_state = CHIP_SUSPENDED;
+
+finished:
+ mutex_unlock(&(uart_info->sleep_state_lock));
+ return err;
+}
+
+/**
+ * cg2900_uart_resume() - Called to bring a device back from a low power state.
+ * @pdev: Pointer to platform device.
+ *
+ * In UART case, CG2900 driver does nothing on resume.
+ *
+ * Returns:
+ * 0 - Success.
+ */
+static int cg2900_uart_resume(struct platform_device *pdev)
+{
+ struct uart_info *uart_info = dev_get_drvdata(&pdev->dev);
+
+ mutex_lock(&(uart_info->sleep_state_lock));
+
+ if (uart_info->sleep_state == CHIP_RESUMING)
+ /* System resume because of trafic on UART. Lets wakeup.*/
+ (void)queue_work(uart_info->wq, &uart_info->wakeup_work.work);
+ else if (uart_info->sleep_state != CHIP_POWERED_DOWN) {
+ /* No need to wakeup chip. Go back to Asleep state.*/
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_ASLEEP\n");
+ uart_info->sleep_state = CHIP_ASLEEP;
+ }
+
+ mutex_unlock(&(uart_info->sleep_state_lock));
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+/**
+ * cg2900_enable_regulator() - Enable regulator.
+ * @uart_info: Main Uart structure.
+ *
+ * Returns:
+ * 0 - Success.
+ * Error from regulator_get, regulator_enable.
+ */
+static int cg2900_enable_regulator(struct uart_info *uart_info)
+{
+#ifdef CONFIG_REGULATOR
+ int err;
+
+ /* Get and enable regulator. */
+ uart_info->regulator = regulator_get(uart_info->dev, "gbf_1v8");
+ if (IS_ERR(uart_info->regulator)) {
+ dev_err(MAIN_DEV, "Not able to find regulator\n");
+ err = PTR_ERR(uart_info->regulator);
+ } else {
+ err = regulator_enable(uart_info->regulator);
+ if (err)
+ dev_err(MAIN_DEV, "Not able to enable regulator\n");
+ else
+ uart_info->regulator_enabled = true;
+ }
+ return err;
+#else
+ return 0;
+#endif
+}
+
+/**
+ * cg2900_disable_regulator() - Disable regulator.
+ * @uart_info: Main Uart structure.
+ *
+ */
+static void cg2900_disable_regulator(struct uart_info *uart_info)
+{
+#ifdef CONFIG_REGULATOR
+ /* Disable and put regulator. */
+ if (uart_info->regulator && uart_info->regulator_enabled) {
+ regulator_disable(uart_info->regulator);
+ uart_info->regulator_enabled = false;
+ }
+ regulator_put(uart_info->regulator);
+ uart_info->regulator = NULL;
+#endif
+}
+
+/**
+ * is_set_baud_rate_cmd() - Checks if data contains set baud rate hci cmd.
+ * @data: Pointer to data array to check.
+ *
+ * Returns:
+ * true - if cmd found;
+ * false - otherwise.
+ */
+static bool is_set_baud_rate_cmd(const char *data)
+{
+ struct hci_command_hdr *cmd;
+
+ if (data[0] != HCI_BT_CMD_H4_CHANNEL)
+ return false;
+
+ cmd = (struct hci_command_hdr *)&data[1];
+ if (le16_to_cpu(cmd->opcode) == CG2900_BT_OP_VS_SET_BAUD_RATE &&
+ cmd->plen == BT_PARAM_LEN(sizeof(struct bt_vs_set_baud_rate_cmd)))
+ return true;
+
+ return false;
+}
+
+/**
+ * is_bt_cmd_complete_no_param() - Checks if data contains command complete event for a certain command.
+ * @skb: sk_buffer containing the data including H:4 header.
+ * @opcode: Command op code.
+ * @status: Command status.
+ *
+ * Returns:
+ * true - If this is the command complete we were looking for;
+ * false - otherwise.
+ */
+static bool is_bt_cmd_complete_no_param(struct sk_buff *skb, u16 opcode,
+ u8 *status)
+{
+ struct hci_event_hdr *event;
+ struct hci_ev_cmd_complete *complete;
+ u8 *data = &(skb->data[0]);
+
+ if (HCI_BT_EVT_H4_CHANNEL != *data)
+ return false;
+
+ data += HCI_H4_SIZE;
+ event = (struct hci_event_hdr *)data;
+ if (HCI_EV_CMD_COMPLETE != event->evt ||
+ HCI_BT_CMD_COMPLETE_LEN != event->plen)
+ return false;
+
+ data += sizeof(*event);
+ complete = (struct hci_ev_cmd_complete *)data;
+ if (opcode != le16_to_cpu(complete->opcode))
+ return false;
+
+ if (status) {
+ /*
+ * All command complete have the status field at first byte of
+ * packet data.
+ */
+ data += sizeof(*complete);
+ *status = *data;
+ }
+ return true;
+}
+
+/**
+ * alloc_rx_skb() - Alloc an sk_buff structure for receiving data from controller.
+ * @size: Size in number of octets.
+ * @priority: Allocation priority, e.g. GFP_KERNEL.
+ *
+ * Returns:
+ * Pointer to sk_buff structure.
+ */
+static struct sk_buff *alloc_rx_skb(unsigned int size, gfp_t priority)
+{
+ struct sk_buff *skb;
+
+ /* Allocate the SKB and reserve space for the header */
+ skb = alloc_skb(size + RX_SKB_RESERVE, priority);
+ if (skb)
+ skb_reserve(skb, RX_SKB_RESERVE);
+
+ return skb;
+}
+
+/**
+ * finish_setting_baud_rate() - Handles sending the ste baud rate hci cmd.
+ * @hu: Pointer to associated Hci uart structure.
+ *
+ * finish_setting_baud_rate() makes sure that the set baud rate cmd has
+ * been really sent out on the wire and then switches the tty driver to new
+ * baud rate.
+ */
+static void finish_setting_baud_rate(struct hci_uart *hu)
+{
+ struct uart_info *uart_info =
+ (struct uart_info *)dev_get_drvdata(hu->proto->dev);
+ /*
+ * Give the tty driver time to send data and proceed. If it hasn't
+ * been sent we can't do much about it anyway.
+ */
+ schedule_timeout_killable(msecs_to_jiffies(UART_TX_TIMEOUT));
+
+ /*
+ * Now set the termios struct to the new baudrate. Start by storing
+ * the old termios.
+ */
+ if (hci_uart_set_baudrate(hu, uart_info->baud_rate) < 0) {
+ /* Something went wrong.*/
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_IDLE\n");
+ uart_info->baud_rate_state = BAUD_IDLE;
+ } else {
+ dev_dbg(MAIN_DEV, "Setting termios to new baud rate\n");
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_WAITING\n");
+ uart_info->baud_rate_state = BAUD_WAITING;
+ }
+
+ hci_uart_flow_ctrl(hu, FLOW_ON);
+}
+
+/**
+ * alloc_set_baud_rate_cmd() - Allocates new sk_buff and fills in the change baud rate hci cmd.
+ * @uart_info: Main Uart structure.
+ * @baud: (in/out) Requested new baud rate. Updated to default baud rate
+ * upon invalid value.
+ *
+ * Returns:
+ * Pointer to allocated sk_buff if successful;
+ * NULL otherwise.
+ */
+static struct sk_buff *alloc_set_baud_rate_cmd(struct uart_info *uart_info,
+ int *baud)
+{
+ struct sk_buff *skb;
+ u8 *h4;
+ struct bt_vs_set_baud_rate_cmd *cmd;
+
+ skb = alloc_skb(sizeof(*cmd) + CG2900_SKB_RESERVE, GFP_ATOMIC);
+ if (!skb) {
+ dev_err(MAIN_DEV,
+ "alloc_set_baud_rate_cmd: Failed to alloc skb\n");
+ return NULL;
+ }
+ skb_reserve(skb, CG2900_SKB_RESERVE);
+
+ cmd = (struct bt_vs_set_baud_rate_cmd *)skb_put(skb, sizeof(cmd));
+
+ /* Create the Hci_Cmd_ST_Set_Uart_Baud_Rate packet */
+ cmd->opcode = cpu_to_le16(CG2900_BT_OP_VS_SET_BAUD_RATE);
+ cmd->plen = BT_PARAM_LEN(sizeof(cmd));
+
+ switch (*baud) {
+ case 57600:
+ cmd->baud_rate = CG2900_BAUD_RATE_57600;
+ break;
+ case 115200:
+ cmd->baud_rate = CG2900_BAUD_RATE_115200;
+ break;
+ case 230400:
+ cmd->baud_rate = CG2900_BAUD_RATE_230400;
+ break;
+ case 460800:
+ cmd->baud_rate = CG2900_BAUD_RATE_460800;
+ break;
+ case 921600:
+ cmd->baud_rate = CG2900_BAUD_RATE_921600;
+ break;
+ case 2000000:
+ cmd->baud_rate = CG2900_BAUD_RATE_2000000;
+ break;
+ case 3000000:
+ cmd->baud_rate = CG2900_BAUD_RATE_3000000;
+ break;
+ case 4000000:
+ cmd->baud_rate = CG2900_BAUD_RATE_4000000;
+ break;
+ default:
+ dev_err(MAIN_DEV,
+ "Invalid speed requested (%d), using 115200 bps "
+ "instead\n", *baud);
+ cmd->baud_rate = CG2900_BAUD_RATE_115200;
+ *baud = 115200;
+ break;
+ };
+
+ h4 = skb_push(skb, HCI_H4_SIZE);
+ *h4 = HCI_BT_CMD_H4_CHANNEL;
+
+ return skb;
+}
+
+/**
+ * work_do_transmit() - Transmit data packet to connectivity controller over UART.
+ * @work: Pointer to work info structure. Contains uart_info structure
+ * pointer.
+ */
+static void work_do_transmit(struct work_struct *work)
+{
+ struct uart_work_struct *current_work =
+ container_of(work, struct uart_work_struct, work);
+ struct uart_info *uart_info = (struct uart_info *)current_work->data;
+
+ kfree(current_work);
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+ /* Mark that there is an ongoing transfer. */
+ uart_info->tx_in_progress = true;
+ spin_unlock_bh(&(uart_info->transmission_lock));
+
+ /* Cancel pending sleep work if there is any. */
+ cancel_delayed_work_sync(&uart_info->sleep_work.work);
+
+ /* Wake up the chip and transport. */
+ wake_up_chip(uart_info);
+
+ (void)hci_uart_tx_wakeup(uart_info->hu);
+}
+
+/**
+ * work_hw_deregistered() - Handle HW deregistered.
+ * @work: Reference to work data.
+ */
+static void work_hw_deregistered(struct work_struct *work)
+{
+ struct uart_work_struct *current_work;
+ struct uart_info *uart_info;
+ int err;
+ current_work = container_of(work, struct uart_work_struct, work);
+ uart_info = (struct uart_info *)current_work->data;
+
+ err = cg2900_deregister_trans_driver(&uart_info->chip_dev);
+ if (err)
+ dev_err(MAIN_DEV, "Could not deregister UART from Core (%d)\n",
+ err);
+
+ kfree(current_work);
+}
+
+/**
+ * set_baud_rate() - Sets new baud rate for the UART.
+ * @hu: Pointer to hci_uart structure.
+ * @baud: New baud rate.
+ *
+ * This function first sends the HCI command
+ * Hci_Cmd_ST_Set_Uart_Baud_Rate. It then changes the baud rate in HW, and
+ * finally it waits for the Command Complete event for the
+ * Hci_Cmd_ST_Set_Uart_Baud_Rate command.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EALREADY if baud rate change is already in progress.
+ * -EFAULT if one or more of the UART related structs is not allocated.
+ * -ENOMEM if skb allocation has failed.
+ * -EPERM if setting the new baud rate has failed.
+ * Errors from create_work_item.
+ */
+static int set_baud_rate(struct hci_uart *hu, int baud)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ int old_baud_rate;
+ struct uart_info *uart_info =
+ (struct uart_info *)dev_get_drvdata(hu->proto->dev);
+
+ dev_dbg(MAIN_DEV, "set_baud_rate (%d baud)\n", baud);
+
+ if (uart_info->baud_rate_state != BAUD_IDLE) {
+ dev_err(MAIN_DEV,
+ "Trying to set new baud rate before old setting "
+ "is finished\n");
+ return -EALREADY;
+ }
+
+ /*
+ * Wait some time to be sure that any RX process has finished (which
+ * flows on RTS in the end) before flowing off the RTS.
+ */
+ schedule_timeout_killable(msecs_to_jiffies(UART_RX_TIMEOUT));
+ hci_uart_flow_ctrl(uart_info->hu, FLOW_OFF);
+
+ /*
+ * Store old baud rate so that we can restore it if something goes
+ * wrong.
+ */
+ old_baud_rate = uart_info->baud_rate;
+
+ skb = alloc_set_baud_rate_cmd(uart_info, &baud);
+ if (!skb) {
+ dev_err(MAIN_DEV, "alloc_set_baud_rate_cmd failed\n");
+ return -ENOMEM;
+ }
+
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_START\n");
+ uart_info->baud_rate_state = BAUD_START;
+ uart_info->baud_rate = baud;
+
+ /* Queue the sk_buffer... */
+ skb_queue_tail(&uart_info->tx_queue, skb);
+
+ /* ... and call the common UART TX function */
+ err = create_work_item(uart_info, work_do_transmit);
+ if (err) {
+ dev_err(MAIN_DEV,
+ "Failed to send change baud rate cmd, freeing skb\n");
+ skb = skb_dequeue_tail(&uart_info->tx_queue);
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_IDLE\n");
+ uart_info->baud_rate_state = BAUD_IDLE;
+ uart_info->baud_rate = old_baud_rate;
+ kfree_skb(skb);
+ return err;
+ }
+
+ dev_dbg(MAIN_DEV, "Set baud rate cmd scheduled for sending\n");
+
+ /*
+ * Now wait for the command complete.
+ * It will come at the new baudrate.
+ */
+ wait_event_timeout(uart_wait_queue,
+ ((BAUD_SUCCESS == uart_info->baud_rate_state) ||
+ (BAUD_FAIL == uart_info->baud_rate_state)),
+ msecs_to_jiffies(UART_RESP_TIMEOUT));
+ if (BAUD_SUCCESS == uart_info->baud_rate_state)
+ dev_info(MAIN_DEV, "Baud rate changed to %d baud\n", baud);
+ else {
+ dev_err(MAIN_DEV, "Failed to set new baud rate (%d)\n",
+ uart_info->baud_rate_state);
+ err = -EPERM;
+ }
+
+ /* Finally flush the TTY so we are sure that is no bad data there */
+ hci_uart_flush_buffer(hu);
+ dev_dbg(MAIN_DEV, "Flushing TTY after baud rate change\n");
+ /* Finished. Set state to IDLE */
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_IDLE\n");
+ uart_info->baud_rate_state = BAUD_IDLE;
+
+ return err;
+}
+
+/**
+ * uart_write() - Transmit data to CG2900 over UART.
+ * @dev: Transport device information.
+ * @skb: SK buffer to transmit.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Errors from create_work_item.
+ */
+static int uart_write(struct cg2900_chip_dev *dev, struct sk_buff *skb)
+{
+ int err;
+ struct uart_info *uart_info = dev_get_drvdata(dev->dev);
+
+ if (uart_debug)
+ dev_dbg(MAIN_DEV, "uart_write: data len = %d\n", skb->len);
+
+ /* Queue the sk_buffer... */
+ skb_queue_tail(&uart_info->tx_queue, skb);
+
+ /* ...and start TX operation */
+
+ err = create_work_item(uart_info, work_do_transmit);
+ if (err)
+ dev_err(MAIN_DEV,
+ "Failed to create work item (%d) uart_tty_wakeup\n",
+ err);
+
+ return err;
+}
+
+/**
+ * uart_open() - Open the CG2900 UART for data transfers.
+ * @dev: Transport device information.
+ *
+ * Returns:
+ * 0 if there is no error,
+ * -EACCES if write to transport failed,
+ * -EIO if chip did not answer to commands.
+ * Errors from set_baud_rate.
+ */
+static int uart_open(struct cg2900_chip_dev *dev)
+{
+ u8 *h4;
+ struct sk_buff *skb;
+ struct hci_command_hdr *cmd;
+ struct uart_info *uart_info = dev_get_drvdata(dev->dev);
+
+ /*
+ * Chip has just been started up. It has a system to autodetect
+ * exact baud rate and transport to use. There are only a few commands
+ * it will recognize and HCI Reset is one of them.
+ * We therefore start with sending that before actually changing
+ * baud rate.
+ *
+ * Create the Hci_Reset packet
+ */
+
+ skb = alloc_skb(sizeof(*cmd) + HCI_H4_SIZE, GFP_ATOMIC);
+ if (!skb) {
+ dev_err(MAIN_DEV, "Couldn't allocate sk_buff with length %d\n",
+ sizeof(*cmd));
+ return -EACCES;
+ }
+ skb_reserve(skb, HCI_H4_SIZE);
+ cmd = (struct hci_command_hdr *)skb_put(skb, sizeof(*cmd));
+ cmd->opcode = cpu_to_le16(HCI_OP_RESET);
+ cmd->plen = 0; /* No parameters for HCI reset */
+
+ h4 = skb_push(skb, HCI_H4_SIZE);
+ *h4 = HCI_BT_CMD_H4_CHANNEL;
+
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_SENDING_RESET\n");
+ uart_info->baud_rate_state = BAUD_SENDING_RESET;
+ dev_dbg(MAIN_DEV, "Sending HCI reset before baud rate change\n");
+
+
+ /* Queue the sk_buffer... */
+ skb_queue_tail(&uart_info->tx_queue, skb);
+
+ (void)hci_uart_tx_wakeup(uart_info->hu);
+
+ /*
+ * Wait for command complete. If error, exit without changing
+ * baud rate.
+ */
+ wait_event_timeout(uart_wait_queue,
+ BAUD_IDLE == uart_info->baud_rate_state,
+ msecs_to_jiffies(UART_RESP_TIMEOUT));
+ if (BAUD_IDLE != uart_info->baud_rate_state) {
+ dev_err(MAIN_DEV, "Failed to send HCI Reset\n");
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_IDLE\n");
+ uart_info->baud_rate_state = BAUD_IDLE;
+ return -EIO;
+ }
+
+ /* Just return if there will be no change of baud rate */
+ if (uart_default_baud != uart_high_baud)
+ return set_baud_rate(uart_info->hu, uart_high_baud);
+ else
+ return 0;
+}
+
+/**
+ * uart_set_chip_power() - Enable or disable the CG2900.
+ * @chip_on: true if chip shall be enabled, false otherwise.
+ */
+static void uart_set_chip_power(struct cg2900_chip_dev *dev, bool chip_on)
+{
+ int uart_baudrate = uart_default_baud;
+ struct cg2900_platform_data *pf_data;
+ struct uart_info *uart_info;
+
+ pf_data = dev_get_platdata(dev->dev);
+ uart_info = dev_get_drvdata(dev->dev);
+
+ dev_info(MAIN_DEV, "Set chip power: %s\n",
+ (chip_on ? "ENABLE" : "DISABLE"));
+
+ /* Cancel any ongoing works.*/
+ cancel_work_sync(&uart_info->wakeup_work.work);
+ cancel_delayed_work_sync(&uart_info->sleep_work.work);
+
+ mutex_lock(&uart_info->sleep_state_lock);
+
+ if (!uart_info->hu) {
+ dev_err(MAIN_DEV, "Hci uart struct is not allocated\n");
+ goto unlock;
+ }
+
+ if (chip_on) {
+ if (uart_info->sleep_state != CHIP_POWERED_DOWN) {
+ dev_err(MAIN_DEV, "Chip is already powered up (%d)\n",
+ uart_info->sleep_state);
+ goto unlock;
+ }
+
+ if (cg2900_enable_regulator(uart_info))
+ goto unlock;
+
+ if (pf_data->enable_chip) {
+ pf_data->enable_chip(dev);
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_AWAKE\n");
+ uart_info->sleep_state = CHIP_AWAKE;
+ }
+
+ (void)hci_uart_set_baudrate(uart_info->hu, uart_baudrate);
+
+ hci_uart_flow_ctrl(uart_info->hu, FLOW_ON);
+ hci_uart_set_break(uart_info->hu, BREAK_OFF);
+ } else {
+ /* Turn off the chip.*/
+ switch (uart_info->sleep_state) {
+ case CHIP_AWAKE:
+ break;
+ case CHIP_FALLING_ASLEEP:
+ hci_uart_set_break(uart_info->hu, BREAK_OFF);
+ break;
+ case CHIP_SUSPENDED:
+ case CHIP_ASLEEP:
+ unset_cts_irq(uart_info);
+ enable_uart_pins(uart_info);
+ break;
+ default:
+ break;
+ }
+
+ if (pf_data->disable_chip) {
+ pf_data->disable_chip(dev);
+ dev_dbg(MAIN_DEV,
+ "New sleep_state: CHIP_POWERED_DOWN\n");
+ uart_info->sleep_state = CHIP_POWERED_DOWN;
+ }
+ cg2900_disable_regulator(uart_info);
+ /*
+ * Setting baud rate to 0 will tell UART driver to shut off its
+ * clocks.
+ */
+ (void)hci_uart_set_baudrate(uart_info->hu, ZERO_BAUD_RATE);
+ }
+
+unlock:
+ mutex_unlock(&(uart_info->sleep_state_lock));
+}
+
+/**
+ * uart_chip_startup_finished() - CG2900 startup finished.
+ * @dev: Transport device information.
+ */
+static void uart_chip_startup_finished(struct cg2900_chip_dev *dev)
+{
+ struct uart_info *uart_info = dev_get_drvdata(dev->dev);
+ unsigned long timeout_jiffies = get_sleep_timeout(uart_info);
+
+ /* Schedule work to put the chip and transport to sleep. */
+ if (timeout_jiffies)
+ queue_delayed_work(uart_info->wq, &uart_info->sleep_work.work,
+ timeout_jiffies);
+}
+/**
+ * uart_close() - Close the CG2900 UART for data transfers.
+ * @dev: Transport device information.
+ *
+ * Returns:
+ * 0 if there is no error.
+ */
+static int uart_close(struct cg2900_chip_dev *dev)
+{
+ /* The chip is already shut down. Power off the chip. */
+ uart_set_chip_power(dev, false);
+ return 0;
+}
+
+/**
+ * send_skb_to_core() - Sends packet received from UART to CG2900 Core.
+ * @skb: Received data packet.
+ *
+ * This function checks if UART is waiting for Command complete event,
+ * see set_baud_rate.
+ * If it is waiting it checks if it is the expected packet and the status.
+ * If not is passes the packet to CG2900 Core.
+ */
+static void send_skb_to_core(struct uart_info *uart_info, struct sk_buff *skb)
+{
+ u8 status;
+
+ if (!skb) {
+ dev_err(MAIN_DEV, "send_skb_to_core: Received NULL as skb\n");
+ return;
+ }
+
+ if (BAUD_WAITING == uart_info->baud_rate_state) {
+ /*
+ * Should only really be one packet received now:
+ * the CmdComplete for the SetBaudrate command
+ * Let's see if this is the packet we are waiting for.
+ */
+ if (!is_bt_cmd_complete_no_param(skb,
+ CG2900_BT_OP_VS_SET_BAUD_RATE, &status)) {
+ /*
+ * Received other event. Should not really happen,
+ * but pass the data to CG2900 Core anyway.
+ */
+ dev_dbg(MAIN_DEV, "Sending packet to CG2900 Core while "
+ "waiting for BaudRate CmdComplete\n");
+ uart_info->chip_dev.c_cb.data_from_chip
+ (&uart_info->chip_dev, skb);
+ return;
+ }
+
+ /*
+ * We have received complete event for our baud rate
+ * change command
+ */
+ if (HCI_BT_ERROR_NO_ERROR == status) {
+ dev_dbg(MAIN_DEV, "Received baud rate change complete "
+ "event OK\n");
+ dev_dbg(MAIN_DEV,
+ "New baud_rate_state: BAUD_SUCCESS\n");
+ uart_info->baud_rate_state = BAUD_SUCCESS;
+ } else {
+ dev_err(MAIN_DEV,
+ "Received baud rate change complete event "
+ "with status 0x%X\n", status);
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_FAIL\n");
+ uart_info->baud_rate_state = BAUD_FAIL;
+ }
+ wake_up_all(&uart_wait_queue);
+ kfree_skb(skb);
+ } else if (BAUD_SENDING_RESET == uart_info->baud_rate_state) {
+ /*
+ * Should only really be one packet received now:
+ * the CmdComplete for the Reset command
+ * Let's see if this is the packet we are waiting for.
+ */
+ if (!is_bt_cmd_complete_no_param(skb, HCI_OP_RESET, &status)) {
+ /*
+ * Received other event. Should not really happen,
+ * but pass the data to CG2900 Core anyway.
+ */
+ dev_dbg(MAIN_DEV, "Sending packet to CG2900 Core while "
+ "waiting for Reset CmdComplete\n");
+ uart_info->chip_dev.c_cb.data_from_chip
+ (&uart_info->chip_dev, skb);
+ return;
+ }
+
+ /*
+ * We have received complete event for our baud rate
+ * change command
+ */
+ if (HCI_BT_ERROR_NO_ERROR == status) {
+ dev_dbg(MAIN_DEV,
+ "Received HCI reset complete event OK\n");
+ /*
+ * Go back to BAUD_IDLE since this was not really
+ * baud rate change but just a preparation of the chip
+ * to be ready to receive commands.
+ */
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_IDLE\n");
+ uart_info->baud_rate_state = BAUD_IDLE;
+ } else {
+ dev_err(MAIN_DEV,
+ "Received HCI reset complete event with "
+ "status 0x%X", status);
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_FAIL\n");
+ uart_info->baud_rate_state = BAUD_FAIL;
+ }
+ wake_up_all(&uart_wait_queue);
+ kfree_skb(skb);
+ } else {
+ /* Just pass data to CG2900 Core */
+ uart_info->chip_dev.c_cb.data_from_chip
+ (&uart_info->chip_dev, skb);
+ }
+}
+
+/**
+ * check_data_len() - Check number of bytes to receive.
+ * @len: Number of bytes left to receive.
+ */
+static void check_data_len(struct uart_info *uart_info, int len)
+{
+ /* First get number of bytes left in the sk_buffer */
+ register int room = skb_tailroom(uart_info->rx_skb);
+
+ if (!len) {
+ /* No data left to receive. Transmit to CG2900 Core */
+ send_skb_to_core(uart_info, uart_info->rx_skb);
+ } else if (len > room) {
+ dev_err(MAIN_DEV, "Data length is too large (%d > %d)\n",
+ len, room);
+ kfree_skb(uart_info->rx_skb);
+ } else {
+ /*
+ * "Normal" case. Switch to data receiving state and store
+ * data length.
+ */
+ uart_info->rx_state = W4_DATA;
+ uart_info->rx_count = len;
+ return;
+ }
+
+ uart_info->rx_state = W4_PACKET_TYPE;
+ uart_info->rx_skb = NULL;
+ uart_info->rx_count = 0;
+}
+
+/**
+ * work_restart_sleep() - Cancel pending sleep_work, wake-up driver and
+ * schedule new sleep_work in a work context.
+ * @work: work which needs to be done.
+ */
+static void work_restart_sleep(struct work_struct *work)
+{
+ struct uart_work_struct *current_work =
+ container_of(work, struct uart_work_struct, work);
+ struct uart_info *uart_info = (struct uart_info *)current_work->data;
+ unsigned long timeout_jiffies = get_sleep_timeout(uart_info);
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+ uart_info->rx_in_progress = false;
+ spin_unlock_bh(&(uart_info->transmission_lock));
+
+ /* Cancel pending sleep work if there is any. */
+ cancel_delayed_work_sync(&uart_info->sleep_work.work);
+
+ wake_up_chip(uart_info);
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+ /*
+ * If there are no ongoing transfers schedule the sleep work.
+ */
+ if (!(uart_info->tx_in_progress) && timeout_jiffies)
+ queue_delayed_work(uart_info->wq,
+ &uart_info->sleep_work.work,
+ timeout_jiffies);
+ spin_unlock_bh(&(uart_info->transmission_lock));
+}
+
+/**
+ * cg2900_hu_receive() - Handles received UART data.
+ * @data: Data received
+ * @count: Number of bytes received
+ *
+ * The cg2900_hu_receive() function handles received UART data and puts it
+ * together to one complete packet.
+ *
+ * Returns:
+ * Number of bytes not handled, i.e. 0 = no error.
+ */
+static int cg2900_hu_receive(struct hci_uart *hu,
+ void *data, int count)
+{
+ const u8 *r_ptr;
+ u8 *w_ptr;
+ int len;
+ struct hci_event_hdr *evt;
+ struct hci_acl_hdr *acl;
+ union fm_leg_evt_or_irq *fm;
+ struct gnss_hci_hdr *gnss;
+ struct uart_info *uart_info = dev_get_drvdata(hu->proto->dev);
+ u8 *tmp;
+
+ r_ptr = (const u8 *)data;
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+ /* Mark that there is an ongoing transfer. */
+ uart_info->rx_in_progress = true;
+ spin_unlock_bh(&(uart_info->transmission_lock));
+
+ /* Cancel pending sleep work if there is any. */
+ cancel_delayed_work(&uart_info->sleep_work.work);
+
+ if (uart_debug)
+ print_hex_dump_bytes(NAME " RX:\t", DUMP_PREFIX_NONE,
+ data, count);
+
+ /* Continue while there is data left to handle */
+ while (count) {
+ /*
+ * If we have already received a packet we know how many bytes
+ * there are left.
+ */
+ if (!uart_info->rx_count)
+ goto check_h4_header;
+
+ /* First copy received data into the skb_rx */
+ len = min_t(unsigned int, uart_info->rx_count, count);
+ memcpy(skb_put(uart_info->rx_skb, len), r_ptr, len);
+ /* Update counters from the length and step the data pointer */
+ uart_info->rx_count -= len;
+ count -= len;
+ r_ptr += len;
+
+ if (uart_info->rx_count)
+ /*
+ * More data to receive to current packet. Break and
+ * wait for next data on the UART.
+ */
+ break;
+
+ /* Handle the different states */
+ tmp = uart_info->rx_skb->data + CG2900_SKB_RESERVE;
+ switch (uart_info->rx_state) {
+ case W4_DATA:
+ /*
+ * Whole data packet has been received.
+ * Transmit it to CG2900 Core.
+ */
+ send_skb_to_core(uart_info, uart_info->rx_skb);
+
+ uart_info->rx_state = W4_PACKET_TYPE;
+ uart_info->rx_skb = NULL;
+ continue;
+
+ case W4_EVENT_HDR:
+ evt = (struct hci_event_hdr *)tmp;
+ check_data_len(uart_info, evt->plen);
+ /* Header read. Continue with next bytes */
+ continue;
+
+ case W4_ACL_HDR:
+ acl = (struct hci_acl_hdr *)tmp;
+ check_data_len(uart_info, le16_to_cpu(acl->dlen));
+ /* Header read. Continue with next bytes */
+ continue;
+
+ case W4_FM_RADIO_HDR:
+ fm = (union fm_leg_evt_or_irq *)tmp;
+ check_data_len(uart_info, fm->param_length);
+ /* Header read. Continue with next bytes */
+ continue;
+
+ case W4_GNSS_HDR:
+ gnss = (struct gnss_hci_hdr *)tmp;
+ check_data_len(uart_info, le16_to_cpu(gnss->plen));
+ /* Header read. Continue with next bytes */
+ continue;
+
+ default:
+ dev_err(MAIN_DEV,
+ "Bad state indicating memory overwrite "
+ "(0x%X)\n", (u8)(uart_info->rx_state));
+ break;
+ }
+
+check_h4_header:
+ /* Check which H:4 packet this is and update RX states */
+ if (*r_ptr == HCI_BT_EVT_H4_CHANNEL) {
+ uart_info->rx_state = W4_EVENT_HDR;
+ uart_info->rx_count = HCI_BT_EVT_HDR_SIZE;
+ } else if (*r_ptr == HCI_BT_ACL_H4_CHANNEL) {
+ uart_info->rx_state = W4_ACL_HDR;
+ uart_info->rx_count = HCI_BT_ACL_HDR_SIZE;
+ } else if (*r_ptr == HCI_FM_RADIO_H4_CHANNEL) {
+ uart_info->rx_state = W4_FM_RADIO_HDR;
+ uart_info->rx_count = HCI_FM_RADIO_HDR_SIZE;
+ } else if (*r_ptr == HCI_GNSS_H4_CHANNEL) {
+ uart_info->rx_state = W4_GNSS_HDR;
+ uart_info->rx_count = HCI_GNSS_HDR_SIZE;
+ } else {
+ dev_err(MAIN_DEV, "Unknown HCI packet type 0x%X\n",
+ (u8)*r_ptr);
+ r_ptr++;
+ count--;
+ continue;
+ }
+
+ /*
+ * Allocate packet. We do not yet know the size and therefore
+ * allocate max size.
+ */
+ uart_info->rx_skb = alloc_rx_skb(RX_SKB_MAX_SIZE, GFP_ATOMIC);
+ if (!uart_info->rx_skb) {
+ dev_err(MAIN_DEV,
+ "Can't allocate memory for new packet\n");
+ uart_info->rx_state = W4_PACKET_TYPE;
+ uart_info->rx_count = 0;
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+ uart_info->rx_in_progress = false;
+ spin_unlock_bh(&(uart_info->transmission_lock));
+ return 0;
+ }
+
+ /* Write the H:4 header first in the sk_buffer */
+ w_ptr = skb_put(uart_info->rx_skb, 1);
+ *w_ptr = *r_ptr;
+
+ /* First byte (H4 header) read. Goto next byte */
+ r_ptr++;
+ count--;
+ }
+
+ (void)queue_work(uart_info->wq, &uart_info->restart_sleep_work.work);
+
+ return count;
+}
+
+/**
+ * cg2900_hu_open() - Called when UART line discipline changed to N_HCI.
+ * @hu: Pointer to associated Hci uart structure.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Errors from cg2900_register_trans_driver.
+ */
+static int cg2900_hu_open(struct hci_uart *hu)
+{
+ int err;
+ struct uart_info *uart_info = dev_get_drvdata(hu->proto->dev);
+
+ if (!uart_info)
+ return -EACCES;
+
+ dev_info(MAIN_DEV, "UART opened\n");
+
+ skb_queue_head_init(&uart_info->tx_queue);
+
+ uart_info->hu = hu;
+
+ /* Tell CG2900 Core that UART is connected */
+ err = cg2900_register_trans_driver(&uart_info->chip_dev);
+ if (err)
+ dev_err(MAIN_DEV, "Could not register transport driver (%d)\n",
+ err);
+
+ if (hu->tty->ops->tiocmget && hu->tty->ops->break_ctl)
+ uart_info->sleep_allowed = true;
+ else {
+ dev_err(MAIN_DEV, "Sleep mode not available\n");
+ uart_info->sleep_allowed = false;
+ }
+
+ return err;
+
+}
+
+/**
+ * cg2900_hu_close() - Close UART tty.
+ * @hu: Pointer to associated hci_uart structure.
+ *
+ * The uart_tty_close() function is called when the line discipline is changed
+ * to something else, the TTY is closed, or the TTY detects a hangup.
+ */
+static int cg2900_hu_close(struct hci_uart *hu)
+{
+ int err;
+ struct uart_info *uart_info = dev_get_drvdata(hu->proto->dev);
+
+
+ BUG_ON(!uart_info);
+ BUG_ON(!uart_info->wq);
+
+ /* Purge any stored sk_buffers */
+ skb_queue_purge(&uart_info->tx_queue);
+ if (uart_info->rx_skb) {
+ kfree_skb(uart_info->rx_skb);
+ uart_info->rx_skb = NULL;
+ }
+
+ dev_info(MAIN_DEV, "UART closed\n");
+ err = create_work_item(uart_info, work_hw_deregistered);
+ if (err)
+ dev_err(MAIN_DEV, "Failed to create work item (%d) "
+ "work_hw_deregistered\n", err);
+
+ uart_info->hu = NULL;
+
+ return 0;
+}
+
+/**
+ * cg2900_hu_dequeue() - Get new skbuff.
+ * @hu: Pointer to associated hci_uart structure.
+ *
+ * The uart_tty_close() function is called when the line discipline is changed
+ * to something else, the TTY is closed, or the TTY detects a hangup.
+ */
+static struct sk_buff *cg2900_hu_dequeue(struct hci_uart *hu)
+{
+ struct sk_buff *skb;
+ struct uart_info *uart_info = dev_get_drvdata(hu->proto->dev);
+ unsigned long timeout_jiffies = get_sleep_timeout(uart_info);
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+
+ skb = skb_dequeue(&uart_info->tx_queue);
+
+ if (!skb)
+ uart_info->tx_in_progress = false;
+
+ /*
+ * If there are no ongoing transfers schedule the sleep work.
+ */
+ if (!(uart_info->rx_in_progress) && timeout_jiffies && !skb)
+ queue_delayed_work(uart_info->wq,
+ &uart_info->sleep_work.work,
+ timeout_jiffies);
+
+ spin_unlock_bh(&(uart_info->transmission_lock));
+
+ if (BAUD_SENDING == uart_info->baud_rate_state && !skb)
+ finish_setting_baud_rate(hu);
+ /*
+ * If it's set baud rate cmd set correct baud state and after
+ * sending is finished inform the tty driver about the new
+ * baud rate.
+ */
+ if ((BAUD_START == uart_info->baud_rate_state) &&
+ skb && (is_set_baud_rate_cmd(skb->data))) {
+ dev_dbg(MAIN_DEV, "UART set baud rate cmd found\n");
+ uart_info->baud_rate_state = BAUD_SENDING;
+ }
+
+ if (uart_debug && skb)
+ print_hex_dump_bytes(NAME " TX:\t", DUMP_PREFIX_NONE,
+ skb->data, skb->len);
+
+ return skb;
+}
+
+/**
+ * cg2900_hu_flush() - Flush buffers.
+ * @hu: Pointer to associated hci_uart structure.
+ *
+ */
+static int cg2900_hu_flush(struct hci_uart *hu)
+{
+ struct uart_info *uart_info = dev_get_drvdata(hu->proto->dev);
+
+ dev_dbg(MAIN_DEV, "ui %p", uart_info);
+ skb_queue_purge(&uart_info->tx_queue);
+ return 0;
+}
+
+/**
+ * cg2900_uart_probe() - Initialize CG2900 UART resources.
+ * @pdev: Platform device.
+ *
+ * This function initializes the module and registers to the UART framework.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM for failed alloc or structure creation.
+ * -ECHILD for failed work queue creation.
+ * Error codes generated by tty_register_ldisc.
+ */
+static int __devinit cg2900_uart_probe(struct platform_device *pdev)
+{
+ int err = 0;
+ struct uart_info *uart_info;
+ struct hci_uart_proto *p;
+ struct resource *resource;
+
+ pr_debug("cg2900_uart_probe");
+
+ uart_info = kzalloc(sizeof(*uart_info), GFP_KERNEL);
+ if (!uart_info) {
+ pr_err("Couldn't allocate uart_info");
+ return -ENOMEM;
+ }
+
+ uart_info->sleep_state = CHIP_POWERED_DOWN;
+ mutex_init(&(uart_info->sleep_state_lock));
+
+ spin_lock_init(&(uart_info->transmission_lock));
+
+ uart_info->chip_dev.t_cb.open = uart_open;
+ uart_info->chip_dev.t_cb.close = uart_close;
+ uart_info->chip_dev.t_cb.write = uart_write;
+ uart_info->chip_dev.t_cb.set_chip_power = uart_set_chip_power;
+ uart_info->chip_dev.t_cb.chip_startup_finished =
+ uart_chip_startup_finished;
+ uart_info->chip_dev.pdev = pdev;
+ uart_info->chip_dev.dev = &pdev->dev;
+ uart_info->chip_dev.t_data = uart_info;
+
+ resource = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
+ "cts_irq");
+ if (!resource) {
+ dev_err(&pdev->dev, "CTS IRQ does not exist\n");
+ err = -EINVAL;
+ goto error_handling_free;
+ }
+ uart_info->cts_irq = resource->start;
+
+ resource = platform_get_resource_byname(pdev, IORESOURCE_IO,
+ "cts_gpio");
+ if (!resource) {
+ dev_err(&pdev->dev, "CTS GPIO does not exist\n");
+ err = -EINVAL;
+ goto error_handling_free;
+ }
+ uart_info->cts_gpio = resource->start;
+
+ /* Init UART TX work queue */
+ uart_info->wq = create_singlethread_workqueue(UART_WQ_NAME);
+ if (!uart_info->wq) {
+ dev_err(MAIN_DEV, "Could not create workqueue\n");
+ err = -ECHILD; /* No child processes */
+ goto error_handling_free;
+ }
+
+ /* Initialize sleep work data */
+ uart_info->sleep_work.data = uart_info;
+ INIT_DELAYED_WORK(&uart_info->sleep_work.work, set_chip_sleep_mode);
+
+ /* Initialize wake-up work data */
+ uart_info->wakeup_work.data = uart_info;
+ INIT_WORK(&uart_info->wakeup_work.work, work_wake_up_chip);
+
+ /* Initialize after_receive work data */
+ uart_info->restart_sleep_work.data = uart_info;
+ INIT_WORK(&uart_info->restart_sleep_work.work, work_restart_sleep);
+
+ uart_info->dev = &pdev->dev;
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p) {
+ dev_err(MAIN_DEV, "cg2900_uart_probe: Could not allocate p\n");
+ goto error_handling_wq;
+ }
+
+ p->dev = uart_info->dev;
+ p->id = HCI_UART_STE;
+ p->open = &cg2900_hu_open;
+ p->close = &cg2900_hu_close;
+ p->recv = &cg2900_hu_receive;
+ p->dequeue = &cg2900_hu_dequeue;
+ p->flush = &cg2900_hu_flush;
+
+ dev_set_drvdata(uart_info->dev, (void *)uart_info);
+
+ err = hci_uart_register_proto(p);
+ if (err) {
+ dev_err(MAIN_DEV, "cg2900_uart_probe: Can not register "
+ "protocol\n");
+ kfree(p);
+ goto error_handling_wq;
+ }
+
+ goto finished;
+
+error_handling_wq:
+ destroy_workqueue(uart_info->wq);
+error_handling_free:
+ kfree(uart_info);
+ uart_info = NULL;
+finished:
+ return err;
+}
+
+/**
+ * cg2900_uart_remove() - Release CG2900 UART resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success.
+ * Error codes generated by tty_unregister_ldisc.
+ */
+static int __devexit cg2900_uart_remove(struct platform_device *pdev)
+{
+ struct uart_info *uart_info = dev_get_drvdata(&pdev->dev);
+
+ pr_debug("cg2900_uart_remove");
+
+ if (!uart_info)
+ return -ECHILD;
+
+ if (uart_info->hu)
+ hci_uart_unregister_proto(uart_info->hu->proto);
+
+ destroy_workqueue(uart_info->wq);
+
+ dev_info(MAIN_DEV, "CG2900 UART removed\n");
+ kfree(uart_info);
+ uart_info = NULL;
+ return 0;
+}
+
+static struct platform_driver cg2900_uart_driver = {
+ .driver = {
+ .name = "cg2900-uart",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_uart_probe,
+ .remove = __devexit_p(cg2900_uart_remove),
+#ifdef CONFIG_PM
+ .suspend = cg2900_uart_suspend,
+ .resume = cg2900_uart_resume
+#endif
+};
+
+
+/**
+ * cg2900_uart_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init cg2900_uart_init(void)
+{
+ pr_debug("cg2900_uart_init");
+ return platform_driver_register(&cg2900_uart_driver);
+}
+
+/**
+ * cg2900_uart_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit cg2900_uart_exit(void)
+{
+ pr_debug("cg2900_uart_exit");
+ platform_driver_unregister(&cg2900_uart_driver);
+}
+
+module_init(cg2900_uart_init);
+module_exit(cg2900_uart_exit);
+
+module_param(uart_default_baud, int, S_IRUGO);
+MODULE_PARM_DESC(uart_default_baud,
+ "Default UART baud rate, e.g. 115200. If not set 115200 will "
+ "be used.");
+
+module_param(uart_high_baud, int, S_IRUGO | S_IWUSR | S_IWGRP);
+MODULE_PARM_DESC(uart_high_baud,
+ "High speed UART baud rate, e.g. 4000000. If not set 3000000 "
+ "will be used.");
+
+module_param(uart_debug, int, S_IRUGO | S_IWUSR | S_IWGRP);
+MODULE_PARM_DESC(uart_debug, "Enable/Disable debug. 0 means Debug disabled.");
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ST-Ericsson CG2900 UART Driver");
diff --git a/drivers/staging/cg2900/bluetooth/hci_ldisc.c b/drivers/staging/cg2900/bluetooth/hci_ldisc.c
new file mode 100644
index 0000000..d7ff9d4
--- /dev/null
+++ b/drivers/staging/cg2900/bluetooth/hci_ldisc.c
@@ -0,0 +1,657 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * This file is a staging solution and shall be integrated into
+ * /drivers/bluetooth/hci_ldisc.c.
+ *
+ * Original hci_ldisc.c file:
+ * Copyright (C) 2000-2001 Qualcomm Incorporated
+ * Copyright (C) 2002-2003 Maxim Krasnyansky <[email protected]>
+ * Copyright (C) 2004-2005 Marcel Holtmann <[email protected]>
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/poll.h>
+
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/ioctl.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+
+#define VERSION "2.3"
+
+#define TTY_BREAK_ON (-1)
+#define TTY_BREAK_OFF (0)
+
+static int reset;
+
+static struct hci_uart_proto *hup[HCI_UART_MAX_PROTO];
+
+int cg2900_hci_uart_register_proto(struct hci_uart_proto *p)
+{
+ if (p->id >= HCI_UART_MAX_PROTO)
+ return -EINVAL;
+
+ if (hup[p->id])
+ return -EEXIST;
+
+ hup[p->id] = p;
+
+ return 0;
+}
+
+int cg2900_hci_uart_unregister_proto(struct hci_uart_proto *p)
+{
+ if (p->id >= HCI_UART_MAX_PROTO)
+ return -EINVAL;
+
+ if (!hup[p->id])
+ return -EINVAL;
+
+ hup[p->id] = NULL;
+
+ return 0;
+}
+
+static struct hci_uart_proto *hci_uart_get_proto(unsigned int id)
+{
+ if (id >= HCI_UART_MAX_PROTO)
+ return NULL;
+
+ return hup[id];
+}
+
+static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type)
+{
+ struct hci_dev *hdev = hu->hdev;
+
+ if (!hdev)
+ return;
+
+ /* Update HCI stat counters */
+ switch (pkt_type) {
+ case HCI_COMMAND_PKT:
+ hdev->stat.cmd_tx++;
+ break;
+
+ case HCI_ACLDATA_PKT:
+ hdev->stat.acl_tx++;
+ break;
+
+ case HCI_SCODATA_PKT:
+ hdev->stat.sco_tx++;
+ break;
+ }
+}
+
+static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
+{
+ struct sk_buff *skb = hu->tx_skb;
+
+ if (!skb)
+ skb = hu->proto->dequeue(hu);
+ else
+ hu->tx_skb = NULL;
+
+ return skb;
+}
+
+int cg2900_hci_uart_tx_wakeup(struct hci_uart *hu)
+{
+ struct tty_struct *tty = hu->tty;
+ struct hci_dev *hdev = hu->hdev;
+ struct sk_buff *skb;
+
+ if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) {
+ set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
+ return 0;
+ }
+
+ BT_DBG("");
+
+restart:
+ clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
+
+ while ((skb = hci_uart_dequeue(hu))) {
+ int len;
+
+ set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ len = tty->ops->write(tty, skb->data, skb->len);
+ if (hdev)
+ hdev->stat.byte_tx += len;
+
+ skb_pull(skb, len);
+ if (skb->len) {
+ hu->tx_skb = skb;
+ break;
+ }
+
+ hci_uart_tx_complete(hu, bt_cb(skb)->pkt_type);
+ kfree_skb(skb);
+ }
+
+ if (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state))
+ goto restart;
+
+ clear_bit(HCI_UART_SENDING, &hu->tx_state);
+ return 0;
+}
+
+int cg2900_hci_uart_set_break(struct hci_uart *hu, bool break_on)
+{
+ struct tty_struct *tty = hu->tty;
+ int state = TTY_BREAK_OFF;
+
+ if (break_on)
+ state = TTY_BREAK_ON;
+
+ if (tty->ops->break_ctl)
+ return tty->ops->break_ctl(tty, state);
+ else
+ return -EOPNOTSUPP;
+}
+
+void cg2900_hci_uart_flow_ctrl(struct hci_uart *hu, bool flow_on)
+{
+ if (flow_on)
+ tty_unthrottle(hu->tty);
+ else
+ tty_throttle(hu->tty);
+}
+
+int cg2900_hci_uart_set_baudrate(struct hci_uart *hu, int baud)
+{
+ struct ktermios old_termios;
+ struct tty_struct *tty = hu->tty;
+
+ if (!tty->ops->set_termios)
+ return -EOPNOTSUPP;
+
+ mutex_lock(&(tty->termios_mutex));
+ /* Start by storing the old termios. */
+ memcpy(&old_termios, tty->termios, sizeof(old_termios));
+
+ tty_encode_baud_rate(tty, baud, baud);
+
+ /* Finally inform the driver */
+ tty->ops->set_termios(tty, &old_termios);
+
+ mutex_unlock(&(tty->termios_mutex));
+
+ return 0;
+}
+
+int cg2900_hci_uart_tiocmget(struct hci_uart *hu)
+{
+ struct tty_struct *tty = hu->tty;
+
+ if (!tty->ops->tiocmget || !hu->fd)
+ return -EOPNOTSUPP;
+
+ return tty->ops->tiocmget(tty, hu->fd);
+}
+
+void cg2900_hci_uart_flush_buffer(struct hci_uart *hu)
+{
+ tty_driver_flush_buffer(hu->tty);
+}
+
+int cg2900_hci_uart_chars_in_buffer(struct hci_uart *hu)
+{
+ return tty_chars_in_buffer(hu->tty);
+}
+
+/* ------- Interface to HCI layer ------ */
+/* Initialize device */
+static int hci_uart_open(struct hci_dev *hdev)
+{
+ BT_DBG("%s %p", hdev->name, hdev);
+
+ /* Nothing to do for UART driver */
+
+ set_bit(HCI_RUNNING, &hdev->flags);
+
+ return 0;
+}
+
+/* Reset device */
+static int hci_uart_flush(struct hci_dev *hdev)
+{
+ struct hci_uart *hu = (struct hci_uart *) hdev->driver_data;
+ struct tty_struct *tty = hu->tty;
+
+ BT_DBG("hdev %p tty %p", hdev, tty);
+
+ if (hu->tx_skb) {
+ kfree_skb(hu->tx_skb); hu->tx_skb = NULL;
+ }
+
+ /* Flush any pending characters in the driver and discipline. */
+ tty_ldisc_flush(tty);
+ tty_driver_flush_buffer(tty);
+
+ if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ hu->proto->flush(hu);
+
+ return 0;
+}
+
+/* Close device */
+static int hci_uart_close(struct hci_dev *hdev)
+{
+ BT_DBG("hdev %p", hdev);
+
+ if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
+ return 0;
+
+ hci_uart_flush(hdev);
+ hdev->flush = NULL;
+ return 0;
+}
+
+/* Send frames from HCI layer */
+static int hci_uart_send_frame(struct sk_buff *skb)
+{
+ struct hci_dev* hdev = (struct hci_dev *) skb->dev;
+ struct hci_uart *hu;
+
+ if (!hdev) {
+ BT_ERR("Frame for unknown device (hdev=NULL)");
+ return -ENODEV;
+ }
+
+ if (!test_bit(HCI_RUNNING, &hdev->flags))
+ return -EBUSY;
+
+ hu = (struct hci_uart *) hdev->driver_data;
+
+ BT_DBG("%s: type %d len %d", hdev->name, bt_cb(skb)->pkt_type,
+ skb->len);
+
+ hu->proto->enqueue(hu, skb);
+
+ hci_uart_tx_wakeup(hu);
+
+ return 0;
+}
+
+static void hci_uart_destruct(struct hci_dev *hdev)
+{
+ if (!hdev)
+ return;
+
+ BT_DBG("%s", hdev->name);
+ kfree(hdev->driver_data);
+}
+
+/* ------ LDISC part ------ */
+/* hci_uart_tty_open
+ *
+ * Called when line discipline changed to HCI_UART.
+ *
+ * Arguments:
+ * tty pointer to tty info structure
+ * Return Value:
+ * 0 if success, otherwise error code
+ */
+static int hci_uart_tty_open(struct tty_struct *tty)
+{
+ struct hci_uart *hu = (void *) tty->disc_data;
+
+ BT_DBG("tty %p", tty);
+
+ /* FIXME: This btw is bogus, nothing requires the old ldisc to clear
+ the pointer */
+ if (hu)
+ return -EEXIST;
+
+ /* Error if the tty has no write op instead of leaving an exploitable
+ hole */
+ if (tty->ops->write == NULL)
+ return -EOPNOTSUPP;
+
+ hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL);
+ if (!hu) {
+ BT_ERR("Can't allocate control structure");
+ return -ENFILE;
+ }
+
+ tty->disc_data = hu;
+ hu->tty = tty;
+ tty->receive_room = 65536;
+
+ spin_lock_init(&hu->rx_lock);
+
+ /* Flush any pending characters in the driver and line discipline. */
+
+ /* FIXME: why is this needed. Note don't use ldisc_ref here as the
+ open path is before the ldisc is referencable */
+
+ if (tty->ldisc->ops->flush_buffer)
+ tty->ldisc->ops->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
+
+ return 0;
+}
+
+/* hci_uart_tty_close()
+ *
+ * Called when the line discipline is changed to something
+ * else, the tty is closed, or the tty detects a hangup.
+ */
+static void hci_uart_tty_close(struct tty_struct *tty)
+{
+ struct hci_uart *hu = (void *)tty->disc_data;
+
+ BT_DBG("tty %p", tty);
+
+ /* Detach from the tty */
+ tty->disc_data = NULL;
+
+ if (hu) {
+ struct hci_dev *hdev = hu->hdev;
+
+ if (hdev)
+ hci_uart_close(hdev);
+
+ if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
+ hu->proto->close(hu);
+ if (hdev) {
+ hci_unregister_dev(hdev);
+ hci_free_dev(hdev);
+ }
+ }
+ }
+}
+
+/* hci_uart_tty_wakeup()
+ *
+ * Callback for transmit wakeup. Called when low level
+ * device driver can accept more send data.
+ *
+ * Arguments: tty pointer to associated tty instance data
+ * Return Value: None
+ */
+static void hci_uart_tty_wakeup(struct tty_struct *tty)
+{
+ struct hci_uart *hu = (void *)tty->disc_data;
+
+ BT_DBG("");
+
+ if (!hu)
+ return;
+
+ clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+
+ if (tty != hu->tty)
+ return;
+
+ if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ hci_uart_tx_wakeup(hu);
+}
+
+/* hci_uart_tty_receive()
+ *
+ * Called by tty low level driver when receive data is
+ * available.
+ *
+ * Arguments: tty pointer to tty isntance data
+ * data pointer to received data
+ * flags pointer to flags for data
+ * count count of received data in bytes
+ *
+ * Return Value: None
+ */
+static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
+ char *flags, int count)
+{
+ struct hci_uart *hu = (void *)tty->disc_data;
+
+ if (!hu || tty != hu->tty)
+ return;
+
+ if (!test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ return;
+
+ spin_lock(&hu->rx_lock);
+ hu->proto->recv(hu, (void *) data, count);
+ if (hu->hdev)
+ hu->hdev->stat.byte_rx += count;
+ spin_unlock(&hu->rx_lock);
+
+ tty_unthrottle(tty);
+}
+
+static int hci_uart_register_dev(struct hci_uart *hu)
+{
+ struct hci_dev *hdev;
+
+ BT_DBG("");
+
+ /* Initialize and register HCI device */
+ hdev = hci_alloc_dev();
+ if (!hdev) {
+ BT_ERR("Can't allocate HCI device");
+ return -ENOMEM;
+ }
+
+ hu->hdev = hdev;
+
+ hdev->bus = HCI_UART;
+ hdev->driver_data = hu;
+
+ hdev->open = hci_uart_open;
+ hdev->close = hci_uart_close;
+ hdev->flush = hci_uart_flush;
+ hdev->send = hci_uart_send_frame;
+ hdev->destruct = hci_uart_destruct;
+
+ hdev->owner = THIS_MODULE;
+
+ if (!reset)
+ set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
+
+ if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags))
+ set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
+ if (hci_register_dev(hdev) < 0) {
+ BT_ERR("Can't register HCI device");
+ hci_free_dev(hdev);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int hci_uart_set_proto(struct hci_uart *hu, int id)
+{
+ struct hci_uart_proto *p;
+ int err;
+
+ p = hci_uart_get_proto(id);
+ if (!p)
+ return -EPROTONOSUPPORT;
+
+ hu->proto = p;
+
+ err = p->open(hu);
+ if (err)
+ return err;
+
+ /*
+ * Protocol might register hdev by itself.
+ * In that case, there is no need to register it here.
+ */
+ if (!hu->proto->register_hci_dev)
+ return 0;
+
+ err = hci_uart_register_dev(hu);
+ if (err) {
+ p->close(hu);
+ return err;
+ }
+
+ return 0;
+}
+
+/* hci_uart_tty_ioctl()
+ *
+ * Process IOCTL system call for the tty device.
+ *
+ * Arguments:
+ *
+ * tty pointer to tty instance data
+ * file pointer to open file object for device
+ * cmd IOCTL command code
+ * arg argument for IOCTL call (cmd dependent)
+ *
+ * Return Value: Command dependent
+ */
+static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct hci_uart *hu = (void *)tty->disc_data;
+ int err = 0;
+
+ BT_DBG("");
+
+ /* Verify the status of the device */
+ if (!hu)
+ return -EBADF;
+
+ switch (cmd) {
+ case HCIUARTSETPROTO:
+ if (!test_and_set_bit(HCI_UART_PROTO_SET, &hu->flags)) {
+ err = hci_uart_set_proto(hu, arg);
+ if (err) {
+ clear_bit(HCI_UART_PROTO_SET, &hu->flags);
+ return err;
+ }
+ /* Keep file descriptor.*/
+ hu->fd = file;
+ } else
+ return -EBUSY;
+ break;
+
+ case HCIUARTGETPROTO:
+ if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ return hu->proto->id;
+ return -EUNATCH;
+
+ case HCIUARTGETDEVICE:
+ if (test_bit(HCI_UART_PROTO_SET, &hu->flags)) {
+ if (hu->hdev)
+ return hu->hdev->id;
+ else
+ return -ENOMSG;
+ }
+ return -EUNATCH;
+
+ case HCIUARTSETFLAGS:
+ if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ return -EBUSY;
+ hu->hdev_flags = arg;
+ break;
+
+ case HCIUARTGETFLAGS:
+ return hu->hdev_flags;
+
+ default:
+ err = n_tty_ioctl_helper(tty, file, cmd, arg);
+ break;
+ };
+
+ return err;
+}
+
+/*
+ * We don't provide read/write/poll interface for user space.
+ */
+static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file,
+ unsigned char __user *buf, size_t nr)
+{
+ return 0;
+}
+
+static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file,
+ const unsigned char *data, size_t count)
+{
+ return 0;
+}
+
+static unsigned int hci_uart_tty_poll(struct tty_struct *tty,
+ struct file *filp, poll_table *wait)
+{
+ return 0;
+}
+
+static int __init cg2900_hci_uart_init(void)
+{
+ static struct tty_ldisc_ops hci_uart_ldisc;
+ int err;
+
+ BT_INFO("HCI UART driver ver %s", VERSION);
+
+ /* Register the tty discipline */
+
+ memset(&hci_uart_ldisc, 0, sizeof(hci_uart_ldisc));
+ hci_uart_ldisc.magic = TTY_LDISC_MAGIC;
+ hci_uart_ldisc.name = "n_cg2900_hci";
+ hci_uart_ldisc.open = hci_uart_tty_open;
+ hci_uart_ldisc.close = hci_uart_tty_close;
+ hci_uart_ldisc.read = hci_uart_tty_read;
+ hci_uart_ldisc.write = hci_uart_tty_write;
+ hci_uart_ldisc.ioctl = hci_uart_tty_ioctl;
+ hci_uart_ldisc.poll = hci_uart_tty_poll;
+ hci_uart_ldisc.receive_buf = hci_uart_tty_receive;
+ hci_uart_ldisc.write_wakeup = hci_uart_tty_wakeup;
+ hci_uart_ldisc.owner = THIS_MODULE;
+
+ err = tty_register_ldisc(N_CG2900_HCI, &hci_uart_ldisc);
+ if (err) {
+ BT_ERR("HCI line discipline registration failed. (%d)", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static void __exit cg2900_hci_uart_exit(void)
+{
+ int err;
+
+ /* Release tty registration of line discipline */
+ err = tty_unregister_ldisc(N_CG2900_HCI);
+ if (err)
+ BT_ERR("Can't unregister HCI line discipline (%d)", err);
+}
+
+module_init(cg2900_hci_uart_init);
+module_exit(cg2900_hci_uart_exit);
+
+module_param(reset, bool, 0644);
+MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl <[email protected]>");
+MODULE_DESCRIPTION("CG2900 Staging Bluetooth HCI UART driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_LDISC(N_CG2900_HCI);
diff --git a/drivers/staging/cg2900/bluetooth/hci_uart.h b/drivers/staging/cg2900/bluetooth/hci_uart.h
new file mode 100644
index 0000000..23a6951
--- /dev/null
+++ b/drivers/staging/cg2900/bluetooth/hci_uart.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * This file is a staging solution and shall be integrated into
+ * /drivers/bluetooth/hci_uart.h.
+ *
+ * Original hci_uart.h file:
+ * Copyright (C) 2000-2001 Qualcomm Incorporated
+ * Copyright (C) 2002-2003 Maxim Krasnyansky <[email protected]>
+ * Copyright (C) 2004-2005 Marcel Holtmann <[email protected]>
+ */
+
+/*
+ * Staging CG2900 Bluetooth HCI UART. Will be replaced by normal N_HCI when
+ * moved to normal driver folder.
+ */
+#ifndef N_CG2900_HCI
+#define N_CG2900_HCI 23
+#endif /* N_CG2900_HCI */
+
+/* Ioctls */
+#define HCIUARTSETPROTO _IOW('U', 200, int)
+#define HCIUARTGETPROTO _IOR('U', 201, int)
+#define HCIUARTGETDEVICE _IOR('U', 202, int)
+#define HCIUARTSETFLAGS _IOW('U', 203, int)
+#define HCIUARTGETFLAGS _IOR('U', 204, int)
+
+/* UART protocols */
+#define HCI_UART_MAX_PROTO 7
+
+#define HCI_UART_H4 0
+#define HCI_UART_BCSP 1
+#define HCI_UART_3WIRE 2
+#define HCI_UART_H4DS 3
+#define HCI_UART_LL 4
+#define HCI_UART_ATH3K 5
+#define HCI_UART_STE 6
+
+#define HCI_UART_RAW_DEVICE 0
+
+/* UART break and flow control parameters */
+#define BREAK_ON true
+#define BREAK_OFF false
+#define FLOW_ON true
+#define FLOW_OFF false
+
+struct hci_uart;
+
+struct hci_uart_proto {
+ unsigned int id;
+ int (*open)(struct hci_uart *hu);
+ int (*close)(struct hci_uart *hu);
+ int (*flush)(struct hci_uart *hu);
+ int (*recv)(struct hci_uart *hu, void *data, int len);
+ int (*enqueue)(struct hci_uart *hu, struct sk_buff *skb);
+ struct sk_buff *(*dequeue)(struct hci_uart *hu);
+ bool register_hci_dev;
+ struct device *dev;
+};
+
+struct hci_uart {
+ struct tty_struct *tty;
+ struct hci_dev *hdev;
+ unsigned long flags;
+ unsigned long hdev_flags;
+
+ struct hci_uart_proto *proto;
+ void *priv;
+
+ struct sk_buff *tx_skb;
+ unsigned long tx_state;
+ spinlock_t rx_lock;
+
+ struct file *fd;
+};
+
+/* HCI_UART proto flag bits */
+#define HCI_UART_PROTO_SET 0
+
+/* TX states */
+#define HCI_UART_SENDING 1
+#define HCI_UART_TX_WAKEUP 2
+
+int cg2900_hci_uart_register_proto(struct hci_uart_proto *p);
+int cg2900_hci_uart_unregister_proto(struct hci_uart_proto *p);
+int cg2900_hci_uart_tx_wakeup(struct hci_uart *hu);
+int cg2900_hci_uart_set_baudrate(struct hci_uart *hu, int baud);
+int cg2900_hci_uart_set_break(struct hci_uart *hu, bool break_on);
+int cg2900_hci_uart_tiocmget(struct hci_uart *hu);
+void cg2900_hci_uart_flush_buffer(struct hci_uart *hu);
+void cg2900_hci_uart_flow_ctrl(struct hci_uart *hu, bool flow_on);
+int cg2900_hci_uart_chars_in_buffer(struct hci_uart *hu);
+
+#define hci_uart_register_proto cg2900_hci_uart_register_proto
+#define hci_uart_unregister_proto cg2900_hci_uart_unregister_proto
+#define hci_uart_tx_wakeup cg2900_hci_uart_tx_wakeup
+#define hci_uart_set_baudrate cg2900_hci_uart_set_baudrate
+#define hci_uart_set_break cg2900_hci_uart_set_break
+#define hci_uart_tiocmget cg2900_hci_uart_tiocmget
+#define hci_uart_flush_buffer cg2900_hci_uart_flush_buffer
+#define hci_uart_flow_ctrl cg2900_hci_uart_flow_ctrl
+#define hci_uart_chars_in_buffer cg2900_hci_uart_chars_in_buffer
diff --git a/drivers/staging/cg2900/board-mop500-cg2900.c b/drivers/staging/cg2900/board-mop500-cg2900.c
new file mode 100644
index 0000000..4a51feb
--- /dev/null
+++ b/drivers/staging/cg2900/board-mop500-cg2900.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2008-2011 ST-Ericsson
+ *
+ * Author: Par-Gunnar Hjalmdahl <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <asm/mach-types.h>
+
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+
+#include <plat/pincfg.h>
+
+#include "cg2900.h"
+#include "devices-cg2900.h"
+#include "pins-db8500.h"
+
+
+#define CG2900_BT_ENABLE_GPIO 170
+#define CG2900_GBF_ENA_RESET_GPIO 171
+#define CG2900_BT_CTS_GPIO 0
+
+enum cg2900_gpio_pull_sleep cg2900_sleep_gpio[21] = {
+ CG2900_NO_PULL, /* GPIO 0: PTA_CONFX */
+ CG2900_PULL_DN, /* GPIO 1: PTA_STATUS */
+ CG2900_NO_PULL, /* GPIO 2: UART_CTSN */
+ CG2900_PULL_UP, /* GPIO 3: UART_RTSN */
+ CG2900_PULL_UP, /* GPIO 4: UART_TXD */
+ CG2900_NO_PULL, /* GPIO 5: UART_RXD */
+ CG2900_PULL_DN, /* GPIO 6: IOM_DOUT */
+ CG2900_NO_PULL, /* GPIO 7: IOM_FSC */
+ CG2900_NO_PULL, /* GPIO 8: IOM_CLK */
+ CG2900_NO_PULL, /* GPIO 9: IOM_DIN */
+ CG2900_PULL_DN, /* GPIO 10: PWR_REQ */
+ CG2900_PULL_DN, /* GPIO 11: HOST_WAKEUP */
+ CG2900_PULL_DN, /* GPIO 12: IIS_DOUT */
+ CG2900_NO_PULL, /* GPIO 13: IIS_WS */
+ CG2900_NO_PULL, /* GPIO 14: IIS_CLK */
+ CG2900_NO_PULL, /* GPIO 15: IIS_DIN */
+ CG2900_PULL_DN, /* GPIO 16: PTA_FREQ */
+ CG2900_PULL_DN, /* GPIO 17: PTA_RF_ACTIVE */
+ CG2900_NO_PULL, /* GPIO 18: NotConnected (J6428) */
+ CG2900_NO_PULL, /* GPIO 19: EXT_DUTY_CYCLE */
+ CG2900_NO_PULL, /* GPIO 20: EXT_FRM_SYNCH */
+};
+
+static struct platform_device ux500_cg2900_device = {
+ .name = "cg2900",
+};
+
+static struct platform_device ux500_cg2900_chip_device = {
+ .name = "cg2900-chip",
+ .dev = {
+ .parent = &ux500_cg2900_device.dev,
+ },
+};
+
+static struct platform_device ux500_stlc2690_chip_device = {
+ .name = "stlc2690-chip",
+ .dev = {
+ .parent = &ux500_cg2900_device.dev,
+ },
+};
+
+static struct cg2900_platform_data cg2900_test_platform_data = {
+ .bus = HCI_VIRTUAL,
+ .gpio_sleep = cg2900_sleep_gpio,
+};
+
+static struct platform_device ux500_cg2900_test_device = {
+ .name = "cg2900-test",
+ .dev = {
+ .parent = &ux500_cg2900_device.dev,
+ .platform_data = &cg2900_test_platform_data,
+ },
+};
+
+static struct resource cg2900_uart_resources[] = {
+ {
+ .start = CG2900_GBF_ENA_RESET_GPIO,
+ .end = CG2900_GBF_ENA_RESET_GPIO,
+ .flags = IORESOURCE_IO,
+ .name = "gbf_ena_reset",
+ },
+ {
+ .start = CG2900_BT_ENABLE_GPIO,
+ .end = CG2900_BT_ENABLE_GPIO,
+ .flags = IORESOURCE_IO,
+ .name = "bt_enable",
+ },
+ {
+ .start = CG2900_BT_CTS_GPIO,
+ .end = CG2900_BT_CTS_GPIO,
+ .flags = IORESOURCE_IO,
+ .name = "cts_gpio",
+ },
+ {
+ .start = NOMADIK_GPIO_TO_IRQ(CG2900_BT_CTS_GPIO),
+ .end = NOMADIK_GPIO_TO_IRQ(CG2900_BT_CTS_GPIO),
+ .flags = IORESOURCE_IRQ,
+ .name = "cts_irq",
+ },
+};
+
+static pin_cfg_t cg2900_uart_enabled[] = {
+ GPIO0_U0_CTSn | PIN_INPUT_PULLUP,
+ GPIO1_U0_RTSn | PIN_OUTPUT_HIGH,
+ GPIO2_U0_RXD | PIN_INPUT_PULLUP,
+ GPIO3_U0_TXD | PIN_OUTPUT_HIGH
+};
+
+static pin_cfg_t cg2900_uart_disabled[] = {
+ GPIO0_GPIO | PIN_INPUT_PULLUP, /* CTS pull up. */
+ GPIO1_GPIO | PIN_OUTPUT_HIGH, /* RTS high-flow off. */
+ GPIO2_GPIO | PIN_INPUT_PULLUP, /* RX pull down. */
+ GPIO3_GPIO | PIN_OUTPUT_LOW /* TX low - break on. */
+};
+
+static struct cg2900_platform_data cg2900_uart_platform_data = {
+ .bus = HCI_UART,
+ .gpio_sleep = cg2900_sleep_gpio,
+ .uart = {
+ .n_uart_gpios = 4,
+ .uart_enabled = cg2900_uart_enabled,
+ .uart_disabled = cg2900_uart_disabled,
+ },
+};
+
+static struct platform_device ux500_cg2900_uart_device = {
+ .name = "cg2900-uart",
+ .dev = {
+ .platform_data = &cg2900_uart_platform_data,
+ .parent = &ux500_cg2900_device.dev,
+ },
+ .num_resources = ARRAY_SIZE(cg2900_uart_resources),
+ .resource = cg2900_uart_resources,
+};
+
+static bool mach_supported(void)
+{
+ if (machine_is_u8500() ||
+ machine_is_u5500() ||
+ machine_is_hrefv60() ||
+ machine_is_nomadik())
+ return true;
+
+ return false;
+}
+
+static int __init board_cg2900_init(void)
+{
+ int err;
+
+ if (!mach_supported())
+ return 0;
+
+ dcg2900_init_platdata(&cg2900_test_platform_data);
+ dcg2900_init_platdata(&cg2900_uart_platform_data);
+
+ err = platform_device_register(&ux500_cg2900_device);
+ if (err)
+ return err;
+ err = platform_device_register(&ux500_cg2900_uart_device);
+ if (err)
+ return err;
+ err = platform_device_register(&ux500_cg2900_test_device);
+ if (err)
+ return err;
+ err = platform_device_register(&ux500_cg2900_chip_device);
+ if (err)
+ return err;
+ err = platform_device_register(&ux500_stlc2690_chip_device);
+ if (err)
+ return err;
+
+ dev_info(&ux500_cg2900_device.dev, "CG2900 initialized\n");
+ return 0;
+}
+
+static void __exit board_cg2900_exit(void)
+{
+ if (!mach_supported())
+ return;
+
+ platform_device_unregister(&ux500_stlc2690_chip_device);
+ platform_device_unregister(&ux500_cg2900_chip_device);
+ platform_device_unregister(&ux500_cg2900_test_device);
+ platform_device_unregister(&ux500_cg2900_uart_device);
+ platform_device_unregister(&ux500_cg2900_device);
+
+ dev_info(&ux500_cg2900_device.dev, "CG2900 removed\n");
+}
+
+module_init(board_cg2900_init);
+module_exit(board_cg2900_exit);
diff --git a/drivers/staging/cg2900/devices-cg2900.c b/drivers/staging/cg2900/devices-cg2900.c
new file mode 100644
index 0000000..c84feab
--- /dev/null
+++ b/drivers/staging/cg2900/devices-cg2900.c
@@ -0,0 +1,342 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Board specific device support for the Linux Bluetooth HCI H:4 Driver
+ * for ST-Ericsson connectivity controller.
+ */
+#define NAME "devices-cg2900"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <asm/byteorder.h>
+#include <asm-generic/errno-base.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <plat/pincfg.h>
+
+#include "cg2900.h"
+#include "devices-cg2900.h"
+
+#define BT_VS_POWER_SWITCH_OFF 0xFD40
+
+#define H4_HEADER_LENGTH 0x01
+#define BT_HEADER_LENGTH 0x03
+
+#define STLC2690_HCI_REV 0x0600
+#define CG2900_PG1_HCI_REV 0x0101
+#define CG2900_PG2_HCI_REV 0x0200
+#define CG2900_PG1_SPECIAL_HCI_REV 0x0700
+
+#define CHIP_INITIAL_HIGH_TIMEOUT 5 /* ms */
+#define CHIP_INITIAL_LOW_TIMEOUT 2 /* us */
+
+struct vs_power_sw_off_cmd {
+ __le16 op_code;
+ u8 len;
+ u8 gpio_0_7_pull_up;
+ u8 gpio_8_15_pull_up;
+ u8 gpio_16_20_pull_up;
+ u8 gpio_0_7_pull_down;
+ u8 gpio_8_15_pull_down;
+ u8 gpio_16_20_pull_down;
+} __packed;
+
+struct dcg2900_info {
+ int gbf_gpio;
+ int bt_gpio;
+ bool sleep_gpio_set;
+ u8 gpio_0_7_pull_up;
+ u8 gpio_8_15_pull_up;
+ u8 gpio_16_20_pull_up;
+ u8 gpio_0_7_pull_down;
+ u8 gpio_8_15_pull_down;
+ u8 gpio_16_20_pull_down;
+ spinlock_t pdb_toggle_lock;
+};
+
+static void dcg2900_enable_chip(struct cg2900_chip_dev *dev)
+{
+ struct dcg2900_info *info = dev->b_data;
+ unsigned long flags;
+
+ if (info->gbf_gpio == -1)
+ return;
+
+ /*
+ * Due to a bug in some CG2900 we cannot just set GPIO high to enable
+ * the chip. We must do the following:
+ * 1: Set PDB high
+ * 2: Wait a few milliseconds
+ * 3: Set PDB low
+ * 4: Wait 2 microseconds
+ * 5: Set PDB high
+ * We disable interrupts step 3-5 to assure that step 4 does not take
+ * too long time (which would invalidate the fix).
+ */
+ gpio_set_value(info->gbf_gpio, 1);
+
+ schedule_timeout_uninterruptible(
+ msecs_to_jiffies(CHIP_INITIAL_HIGH_TIMEOUT));
+
+ spin_lock_irqsave(&info->pdb_toggle_lock, flags);
+ gpio_set_value(info->gbf_gpio, 0);
+ udelay(CHIP_INITIAL_LOW_TIMEOUT);
+ gpio_set_value(info->gbf_gpio, 1);
+ spin_unlock_irqrestore(&info->pdb_toggle_lock, flags);
+}
+
+static void dcg2900_disable_chip(struct cg2900_chip_dev *dev)
+{
+ struct dcg2900_info *info = dev->b_data;
+
+ if (info->gbf_gpio != -1)
+ gpio_set_value(info->gbf_gpio, 0);
+}
+
+static struct sk_buff *dcg2900_get_power_switch_off_cmd
+ (struct cg2900_chip_dev *dev, u16 *op_code)
+{
+ struct sk_buff *skb;
+ struct vs_power_sw_off_cmd *cmd;
+ struct dcg2900_info *info;
+ int i;
+
+ /* If connected chip does not support the command return NULL */
+ if (CG2900_PG1_SPECIAL_HCI_REV != dev->chip.hci_revision &&
+ CG2900_PG1_HCI_REV != dev->chip.hci_revision &&
+ CG2900_PG2_HCI_REV != dev->chip.hci_revision)
+ return NULL;
+
+ dev_dbg(dev->dev, "Generating PowerSwitchOff command\n");
+
+ info = dev->b_data;
+
+ skb = alloc_skb(sizeof(*cmd) + H4_HEADER_LENGTH, GFP_KERNEL);
+ if (!skb) {
+ dev_err(dev->dev, "Could not allocate skb\n");
+ return NULL;
+ }
+
+ skb_reserve(skb, H4_HEADER_LENGTH);
+ cmd = (struct vs_power_sw_off_cmd *)skb_put(skb, sizeof(*cmd));
+ cmd->op_code = cpu_to_le16(BT_VS_POWER_SWITCH_OFF);
+ cmd->len = sizeof(*cmd) - BT_HEADER_LENGTH;
+ /*
+ * Enter system specific GPIO settings here:
+ * Section data[3-5] is GPIO pull-up selection
+ * Section data[6-8] is GPIO pull-down selection
+ * Each section is a bitfield where
+ * - byte 0 bit 0 is GPIO 0
+ * - byte 0 bit 1 is GPIO 1
+ * - up to
+ * - byte 2 bit 4 which is GPIO 20
+ * where each bit means:
+ * - 0: No pull-up / no pull-down
+ * - 1: Pull-up / pull-down
+ * All GPIOs are set as input.
+ */
+ if (!info->sleep_gpio_set) {
+ struct cg2900_platform_data *pf_data;
+
+ pf_data = dev_get_platdata(dev->dev);
+ for (i = 0; i < 8; i++) {
+ if (pf_data->gpio_sleep[i] == CG2900_PULL_UP)
+ info->gpio_0_7_pull_up |= (1 << i);
+ else if (pf_data->gpio_sleep[i] == CG2900_PULL_DN)
+ info->gpio_0_7_pull_down |= (1 << i);
+ }
+ for (i = 8; i < 16; i++) {
+ if (pf_data->gpio_sleep[i] == CG2900_PULL_UP)
+ info->gpio_8_15_pull_up |= (1 << (i - 8));
+ else if (pf_data->gpio_sleep[i] == CG2900_PULL_DN)
+ info->gpio_8_15_pull_down |= (1 << (i - 8));
+ }
+ for (i = 16; i < 21; i++) {
+ if (pf_data->gpio_sleep[i] == CG2900_PULL_UP)
+ info->gpio_16_20_pull_up |= (1 << (i - 16));
+ else if (pf_data->gpio_sleep[i] == CG2900_PULL_DN)
+ info->gpio_16_20_pull_down |= (1 << (i - 16));
+ }
+ info->sleep_gpio_set = true;
+ }
+ cmd->gpio_0_7_pull_up = info->gpio_0_7_pull_up;
+ cmd->gpio_8_15_pull_up = info->gpio_8_15_pull_up;
+ cmd->gpio_16_20_pull_up = info->gpio_16_20_pull_up;
+ cmd->gpio_0_7_pull_down = info->gpio_0_7_pull_down;
+ cmd->gpio_8_15_pull_down = info->gpio_8_15_pull_down;
+ cmd->gpio_16_20_pull_down = info->gpio_16_20_pull_down;
+
+
+ if (op_code)
+ *op_code = BT_VS_POWER_SWITCH_OFF;
+
+ return skb;
+}
+
+static int dcg2900_init(struct cg2900_chip_dev *dev)
+{
+ int err = 0;
+ struct dcg2900_info *info;
+ struct resource *resource;
+ const char *gbf_name;
+ const char *bt_name = NULL;
+
+ /* First retrieve and save the resources */
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(dev->dev, "Could not allocate dcg2900_info\n");
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&info->pdb_toggle_lock);
+
+ if (!dev->pdev->num_resources) {
+ dev_dbg(dev->dev, "No resources available\n");
+ info->gbf_gpio = -1;
+ info->bt_gpio = -1;
+ goto finished;
+ }
+
+ resource = platform_get_resource_byname(dev->pdev, IORESOURCE_IO,
+ "gbf_ena_reset");
+ if (!resource) {
+ dev_err(dev->dev, "GBF GPIO does not exist\n");
+ err = -EINVAL;
+ goto err_handling;
+ }
+ info->gbf_gpio = resource->start;
+ gbf_name = resource->name;
+
+ resource = platform_get_resource_byname(dev->pdev, IORESOURCE_IO,
+ "bt_enable");
+ /* BT Enable GPIO may not exist */
+ if (resource) {
+ info->bt_gpio = resource->start;
+ bt_name = resource->name;
+ }
+
+ /* Now setup the GPIOs */
+ err = gpio_request(info->gbf_gpio, gbf_name);
+ if (err < 0) {
+ dev_err(dev->dev, "gpio_request failed with err: %d\n", err);
+ goto err_handling;
+ }
+
+ err = gpio_direction_output(info->gbf_gpio, 0);
+ if (err < 0) {
+ dev_err(dev->dev, "gpio_direction_output failed with err: %d\n",
+ err);
+ goto err_handling_free_gpio_gbf;
+ }
+
+ if (!bt_name) {
+ info->bt_gpio = -1;
+ goto finished;
+ }
+
+ err = gpio_request(info->bt_gpio, bt_name);
+ if (err < 0) {
+ dev_err(dev->dev, "gpio_request failed with err: %d\n", err);
+ goto err_handling_free_gpio_gbf;
+ }
+
+ err = gpio_direction_output(info->bt_gpio, 1);
+ if (err < 0) {
+ dev_err(dev->dev, "gpio_direction_output failed with err: %d\n",
+ err);
+ goto err_handling_free_gpio_bt;
+ }
+
+finished:
+ dev->b_data = info;
+ return 0;
+
+err_handling_free_gpio_bt:
+ gpio_free(info->bt_gpio);
+err_handling_free_gpio_gbf:
+ gpio_free(info->gbf_gpio);
+err_handling:
+ kfree(info);
+ return err;
+}
+
+static void dcg2900_exit(struct cg2900_chip_dev *dev)
+{
+ struct dcg2900_info *info = dev->b_data;
+
+ dcg2900_disable_chip(dev);
+ if (info->bt_gpio != -1)
+ gpio_free(info->bt_gpio);
+ if (info->gbf_gpio != -1)
+ gpio_free(info->gbf_gpio);
+ kfree(info);
+ dev->b_data = NULL;
+}
+
+static int dcg2900_disable_uart(struct cg2900_chip_dev *dev)
+{
+ int err;
+ struct cg2900_platform_data *pdata = dev_get_platdata(dev->dev);
+
+ /*
+ * Without this delay we get interrupt on CTS immediately
+ * due to some turbulences on this line.
+ */
+ mdelay(4);
+
+ /* Disable UART functions. */
+ err = nmk_config_pins(pdata->uart.uart_disabled,
+ pdata->uart.n_uart_gpios);
+ if (err)
+ goto error;
+
+ return 0;
+
+error:
+ (void)nmk_config_pins(pdata->uart.uart_enabled,
+ pdata->uart.n_uart_gpios);
+ dev_err(dev->dev, "Cannot set interrupt (%d)\n", err);
+ return err;
+}
+
+static int dcg2900_enable_uart(struct cg2900_chip_dev *dev)
+{
+ int err;
+ struct cg2900_platform_data *pdata = dev_get_platdata(dev->dev);
+
+ /* Restore UART settings. */
+ err = nmk_config_pins(pdata->uart.uart_enabled,
+ pdata->uart.n_uart_gpios);
+ if (err)
+ dev_err(dev->dev, "Unable to enable UART (%d)\n", err);
+
+ return err;
+}
+
+void dcg2900_init_platdata(struct cg2900_platform_data *data)
+{
+ data->init = dcg2900_init;
+ data->exit = dcg2900_exit;
+ data->enable_chip = dcg2900_enable_chip;
+ data->disable_chip = dcg2900_disable_chip;
+ data->get_power_switch_off_cmd = dcg2900_get_power_switch_off_cmd;
+
+ data->uart.enable_uart = dcg2900_enable_uart;
+ data->uart.disable_uart = dcg2900_disable_uart;
+}
diff --git a/drivers/staging/cg2900/devices-cg2900.h b/drivers/staging/cg2900/devices-cg2900.h
new file mode 100644
index 0000000..e365a4f
--- /dev/null
+++ b/drivers/staging/cg2900/devices-cg2900.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Par-Gunnar Hjalmdahl <[email protected]>
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __DEVICES_CG2900_H
+#define __DEVICES_CG2900_H
+
+#include "cg2900.h"
+
+/**
+ * enum cg2900_gpio_pull_sleep - GPIO pull setting in sleep.
+ * @CG2900_NO_PULL: Normal input in sleep (no pull up or down).
+ * @CG2900_PULL_UP: Pull up in sleep.
+ * @CG2900_PULL_DN: Pull down in sleep.
+ */
+enum cg2900_gpio_pull_sleep {
+ CG2900_NO_PULL,
+ CG2900_PULL_UP,
+ CG2900_PULL_DN
+};
+
+/**
+ * dcg2900_init_platdata() - Initializes platform data with callback functions.
+ * @data: Platform data.
+ */
+extern void dcg2900_init_platdata(struct cg2900_platform_data *data);
+
+#endif /* __DEVICES_CG2900_H */
diff --git a/drivers/staging/cg2900/include/cg2900.h b/drivers/staging/cg2900/include/cg2900.h
new file mode 100644
index 0000000..476ce15
--- /dev/null
+++ b/drivers/staging/cg2900/include/cg2900.h
@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 connectivity
+ * controller.
+ */
+
+#ifndef _CG2900_H_
+#define _CG2900_H_
+
+#include <linux/types.h>
+
+/* Perform reset. No parameters used */
+#define CG2900_CHAR_DEV_IOCTL_RESET _IOW('U', 210, int)
+/* Check for reset */
+#define CG2900_CHAR_DEV_IOCTL_CHECK4RESET _IOR('U', 212, int)
+/* Retrieve revision info */
+#define CG2900_CHAR_DEV_IOCTL_GET_REVISION _IOR('U', 213, \
+ struct cg2900_rev_data)
+
+#define CG2900_CHAR_DEV_IOCTL_EVENT_IDLE 0
+#define CG2900_CHAR_DEV_IOCTL_EVENT_RESET 1
+
+/**
+ * struct cg2900_rev_data - Contains revision data for the local controller.
+ * @revision: Revision of the controller, e.g. to indicate that it is
+ * a CG2900 controller.
+ * @sub_version: Subversion of the controller, e.g. to indicate a certain
+ * tape-out of the controller.
+ *
+ * The values to match retrieved values to each controller may be retrieved from
+ * the manufacturer.
+ */
+struct cg2900_rev_data {
+ int revision;
+ int sub_version;
+};
+
+#ifdef __KERNEL__
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+
+/* Temporary solution while in staging directory */
+#include "cg2900_hci.h"
+
+/**
+ * struct cg2900_chip_rev_info - Chip info structure.
+ * @manufacturer: Chip manufacturer.
+ * @hci_version: Bluetooth version supported over HCI.
+ * @hci_revision: Chip revision, i.e. which chip is this.
+ * @lmp_pal_version: Bluetooth version supported over air.
+ * @hci_sub_version: Chip sub-version, i.e. which tape-out is this.
+ *
+ * Note that these values match the Bluetooth Assigned Numbers,
+ * see http://www.bluetooth.org/
+ */
+struct cg2900_chip_rev_info {
+ u16 manufacturer;
+ u8 hci_version;
+ u16 hci_revision;
+ u8 lmp_pal_version;
+ u16 hci_sub_version;
+};
+
+struct cg2900_chip_dev;
+
+/**
+ * struct cg2900_id_callbacks - Chip handler identification callbacks.
+ * @check_chip_support: Called when chip is connected. If chip is supported by
+ * driver, return true and fill in @callbacks in @dev.
+ *
+ * Note that the callback may be NULL. It must always be NULL checked before
+ * calling.
+ */
+struct cg2900_id_callbacks {
+ bool (*check_chip_support)(struct cg2900_chip_dev *dev);
+};
+
+/**
+ * struct cg2900_chip_callbacks - Callback functions registered by chip handler.
+ * @data_from_chip: Called when data shall be transmitted to user.
+ * @chip_removed: Called when chip is removed.
+ *
+ * Note that some callbacks may be NULL. They must always be NULL checked before
+ * calling.
+ */
+struct cg2900_chip_callbacks {
+ void (*data_from_chip)(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb);
+ void (*chip_removed)(struct cg2900_chip_dev *dev);
+};
+
+/**
+ * struct cg2900_trans_callbacks - Callback functions registered by transport.
+ * @open: CG2900 Core needs a transport.
+ * @close: CG2900 Core does not need a transport.
+ * @write: CG2900 Core transmits to the chip.
+ * @set_chip_power: CG2900 Core enables or disables the chip.
+ * @chip_startup_finished: CG2900 Chip startup finished notification.
+ *
+ * Note that some callbacks may be NULL. They must always be NULL checked before
+ * calling.
+ */
+struct cg2900_trans_callbacks {
+ int (*open)(struct cg2900_chip_dev *dev);
+ int (*close)(struct cg2900_chip_dev *dev);
+ int (*write)(struct cg2900_chip_dev *dev, struct sk_buff *skb);
+ void (*set_chip_power)(struct cg2900_chip_dev *dev, bool chip_on);
+ void (*chip_startup_finished)(struct cg2900_chip_dev *dev);
+};
+
+/**
+ * struct cg2900_chip_dev - Chip handler info structure.
+ * @dev: Device associated with this chip.
+ * @pdev: Platform device associated with this chip.
+ * @chip: Chip info such as manufacturer.
+ * @c_cb: Callback structure for the chip handler.
+ * @t_cb: Callback structure for the transport.
+ * @c_data: Arbitrary data set by chip handler.
+ * @t_data: Arbitrary data set by transport.
+ * @b_data: Arbitrary data set by board handler.
+ * @prv_data: Arbitrary data set by CG2900 Core.
+ */
+struct cg2900_chip_dev {
+ struct device *dev;
+ struct platform_device *pdev;
+ struct cg2900_chip_rev_info chip;
+ struct cg2900_chip_callbacks c_cb;
+ struct cg2900_trans_callbacks t_cb;
+ void *c_data;
+ void *t_data;
+ void *b_data;
+ void *prv_data;
+};
+
+/**
+ * struct cg2900_platform_data - Contains platform data for CG2900.
+ * @init: Callback called upon system start.
+ * @exit: Callback called upon system shutdown.
+ * @enable_chip: Callback called for enabling CG2900 chip.
+ * @disable_chip: Callback called for disabling CG2900 chip.
+ * @get_power_switch_off_cmd: Callback called to retrieve
+ * HCI VS_Power_Switch_Off command (command
+ * HCI requires platform specific GPIO data).
+ * @bus: Transport used, see @include/net/bluetooth/hci.h.
+ * @gpio_sleep: Array of GPIO sleep settings.
+ * @enable_uart: Callback called when switching from UART GPIO to
+ * UART HW.
+ * @disable_uart: Callback called when switching from UART HW to
+ * UART GPIO.
+ * @n_uart_gpios: Number of UART GPIOs.
+ * @uart_enabled: Array of size @n_uart_gpios with GPIO setting for
+ * enabling UART HW (switching from GPIO mode).
+ * @uart_disabled: Array of size @n_uart_gpios with GPIO setting for
+ * disabling UART HW (switching to GPIO mode).
+ * @uart: Platform data structure for UART transport.
+ *
+ * Any callback may be NULL if not needed.
+ */
+struct cg2900_platform_data {
+ int (*init)(struct cg2900_chip_dev *dev);
+ void (*exit)(struct cg2900_chip_dev *dev);
+ void (*enable_chip)(struct cg2900_chip_dev *dev);
+ void (*disable_chip)(struct cg2900_chip_dev *dev);
+ struct sk_buff* (*get_power_switch_off_cmd)(struct cg2900_chip_dev *dev,
+ u16 *op_code);
+
+ __u8 bus;
+ enum cg2900_gpio_pull_sleep *gpio_sleep;
+
+ struct {
+ int (*enable_uart)(struct cg2900_chip_dev *dev);
+ int (*disable_uart)(struct cg2900_chip_dev *dev);
+ int n_uart_gpios;
+ unsigned long *uart_enabled;
+ unsigned long *uart_disabled;
+ } uart;
+};
+
+/**
+ * struct cg2900_user_data - Contains platform data for CG2900 user.
+ * @dev: Current device. Set by CG2900 user upon probe.
+ * @opened: True if channel is opened.
+ * @user_data: Data set and used by CG2900 user.
+ * @private_data: Data set and used by CG2900 driver.
+ * @h4_channel: H4 channel. Set by CG2900 driver.
+ * @is_audio: True if this channel is an audio channel. Set by CG2900
+ * driver.
+ * @chip_independent: True if this channel does not require chip to be
+ * powered. Set by CG2900 driver.
+ * @bt_bus: Transport used, see @include/net/bluetooth/hci.h.
+ * @char_dev_name: Name to be used for character device.
+ * @channel_data: Input data specific to current device.
+ * @open: Open device channel. Set by CG2900 driver.
+ * @close: Close device channel. Set by CG2900 driver.
+ * @reset: Reset connectivity controller. Set by CG2900 driver.
+ * @alloc_skb: Alloc sk_buffer. Set by CG2900 driver.
+ * @write: Write to device channel. Set by CG2900 driver.
+ * @get_local_revision: Get revision data of conncected chip. Set by CG2900
+ * driver.
+ * @read_cb: Callback function called when data is received on the
+ * device channel. Set by CG2900 user. Mandatory.
+ * @reset_cb: Callback function called when the connectivity
+ * controller has been reset. Set by CG2900 user.
+ *
+ * Any callback may be NULL if not needed.
+ */
+struct cg2900_user_data {
+ struct device *dev;
+ bool opened;
+
+ void *user_data;
+ void *private_data;
+
+ int h4_channel;
+ bool is_audio;
+ bool chip_independent;
+
+ union {
+ __u8 bt_bus;
+ char *char_dev_name;
+ } channel_data;
+
+ int (*open)(struct cg2900_user_data *user_data);
+ void (*close)(struct cg2900_user_data *user_data);
+ int (*reset)(struct cg2900_user_data *user_data);
+ struct sk_buff * (*alloc_skb)(unsigned int size, gfp_t priority);
+ int (*write)(struct cg2900_user_data *user_data, struct sk_buff *skb);
+ bool (*get_local_revision)(struct cg2900_user_data *user_data,
+ struct cg2900_rev_data *rev_data);
+
+ void (*read_cb)(struct cg2900_user_data *user_data,
+ struct sk_buff *skb);
+ void (*reset_cb)(struct cg2900_user_data *user_data);
+};
+
+static inline void *cg2900_get_usr(struct cg2900_user_data *dev)
+{
+ if (dev)
+ return dev->user_data;
+ return NULL;
+}
+
+static inline void cg2900_set_usr(struct cg2900_user_data *dev, void *data)
+{
+ if (dev)
+ dev->user_data = data;
+}
+
+static inline void *cg2900_get_prv(struct cg2900_user_data *dev)
+{
+ if (dev)
+ return dev->private_data;
+ return NULL;
+}
+
+static inline void cg2900_set_prv(struct cg2900_user_data *dev, void *data)
+{
+ if (dev)
+ dev->private_data = data;
+}
+
+extern int cg2900_register_chip_driver(struct cg2900_id_callbacks *cb);
+extern void cg2900_deregister_chip_driver(struct cg2900_id_callbacks *cb);
+extern int cg2900_register_trans_driver(struct cg2900_chip_dev *dev);
+extern int cg2900_deregister_trans_driver(struct cg2900_chip_dev *dev);
+extern unsigned long cg2900_get_sleep_timeout(void);
+
+#endif /* __KERNEL__ */
+#endif /* _CG2900_H_ */
diff --git a/drivers/staging/cg2900/include/cg2900_audio.h b/drivers/staging/cg2900/include/cg2900_audio.h
new file mode 100644
index 0000000..ff0f053
--- /dev/null
+++ b/drivers/staging/cg2900/include/cg2900_audio.h
@@ -0,0 +1,473 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth Audio Driver for ST-Ericsson controller.
+ */
+
+#ifndef _CG2900_AUDIO_H_
+#define _CG2900_AUDIO_H_
+
+#include <linux/types.h>
+
+/*
+ * Digital Audio Interface configuration types
+ */
+
+/** CG2900_A2DP_MAX_AVDTP_HDR_LEN - Max length of a AVDTP header.
+ * Max length of a AVDTP header for an A2DP packet.
+ */
+#define CG2900_A2DP_MAX_AVDTP_HDR_LEN 25
+
+/*
+ * Op codes used when writing commands to the audio interface from user space
+ * using the char device.
+ */
+#define CG2900_OPCODE_SET_DAI_CONF 0x01
+#define CG2900_OPCODE_GET_DAI_CONF 0x02
+#define CG2900_OPCODE_CONFIGURE_ENDPOINT 0x03
+#define CG2900_OPCODE_START_STREAM 0x04
+#define CG2900_OPCODE_STOP_STREAM 0x05
+
+/**
+ * enum cg2900_dai_dir - Contains the DAI port directions alternatives.
+ * @DAI_DIR_B_RX_A_TX: Port B as Rx and port A as Tx.
+ * @DAI_DIR_B_TX_A_RX: Port B as Tx and port A as Rx.
+ */
+enum cg2900_dai_dir {
+ DAI_DIR_B_RX_A_TX = 0x00,
+ DAI_DIR_B_TX_A_RX = 0x01
+};
+
+/**
+ * enum cg2900_dai_mode - DAI mode alternatives.
+ * @DAI_MODE_SLAVE: Slave.
+ * @DAI_MODE_MASTER: Master.
+ */
+enum cg2900_dai_mode {
+ DAI_MODE_SLAVE = 0x00,
+ DAI_MODE_MASTER = 0x01
+};
+
+/**
+ * enum cg2900_dai_stream_ratio - Voice stream ratio alternatives.
+ * @STREAM_RATIO_FM16_VOICE16: FM 16kHz, Voice 16kHz.
+ * @STREAM_RATIO_FM16_VOICE8: FM 16kHz, Voice 8kHz.
+ * @STREAM_RATIO_FM48_VOICE16: FM 48kHz, Voice 16Khz.
+ * @STREAM_RATIO_FM48_VOICE8: FM 48kHz, Voice 8kHz.
+ *
+ * Contains the alternatives for the voice stream ratio between the Audio stream
+ * sample rate and the Voice stream sample rate.
+ */
+enum cg2900_dai_stream_ratio {
+ STREAM_RATIO_FM16_VOICE16 = 0x01,
+ STREAM_RATIO_FM16_VOICE8 = 0x02,
+ STREAM_RATIO_FM48_VOICE16 = 0x03,
+ STREAM_RATIO_FM48_VOICE8 = 0x06
+};
+
+/**
+ * enum cg2900_dai_fs_duration - Frame sync duration alternatives.
+ * @SYNC_DURATION_8: 8 frames sync duration.
+ * @SYNC_DURATION_16: 16 frames sync duration.
+ * @SYNC_DURATION_24: 24 frames sync duration.
+ * @SYNC_DURATION_32: 32 frames sync duration.
+ * @SYNC_DURATION_48: 48 frames sync duration.
+ * @SYNC_DURATION_50: 50 frames sync duration.
+ * @SYNC_DURATION_64: 64 frames sync duration.
+ * @SYNC_DURATION_75: 75 frames sync duration.
+ * @SYNC_DURATION_96: 96 frames sync duration.
+ * @SYNC_DURATION_125: 125 frames sync duration.
+ * @SYNC_DURATION_128: 128 frames sync duration.
+ * @SYNC_DURATION_150: 150 frames sync duration.
+ * @SYNC_DURATION_192: 192 frames sync duration.
+ * @SYNC_DURATION_250: 250 frames sync duration.
+ * @SYNC_DURATION_256: 256 frames sync duration.
+ * @SYNC_DURATION_300: 300 frames sync duration.
+ * @SYNC_DURATION_384: 384 frames sync duration.
+ * @SYNC_DURATION_500: 500 frames sync duration.
+ * @SYNC_DURATION_512: 512 frames sync duration.
+ * @SYNC_DURATION_600: 600 frames sync duration.
+ * @SYNC_DURATION_768: 768 frames sync duration.
+ *
+ * This parameter sets the PCM frame sync duration. It is calculated as the
+ * ratio between the bit clock and the frame rate. For example, if the bit
+ * clock is 512 kHz and the stream sample rate is 8 kHz, the PCM frame sync
+ * duration is 512 / 8 = 64.
+ */
+enum cg2900_dai_fs_duration {
+ SYNC_DURATION_8 = 0,
+ SYNC_DURATION_16 = 1,
+ SYNC_DURATION_24 = 2,
+ SYNC_DURATION_32 = 3,
+ SYNC_DURATION_48 = 4,
+ SYNC_DURATION_50 = 5,
+ SYNC_DURATION_64 = 6,
+ SYNC_DURATION_75 = 7,
+ SYNC_DURATION_96 = 8,
+ SYNC_DURATION_125 = 9,
+ SYNC_DURATION_128 = 10,
+ SYNC_DURATION_150 = 11,
+ SYNC_DURATION_192 = 12,
+ SYNC_DURATION_250 = 13,
+ SYNC_DURATION_256 = 14,
+ SYNC_DURATION_300 = 15,
+ SYNC_DURATION_384 = 16,
+ SYNC_DURATION_500 = 17,
+ SYNC_DURATION_512 = 18,
+ SYNC_DURATION_600 = 19,
+ SYNC_DURATION_768 = 20
+};
+
+/**
+ * enum cg2900_dai_bit_clk - Bit Clock alternatives.
+ * @BIT_CLK_128: 128 Kbits clock.
+ * @BIT_CLK_256: 256 Kbits clock.
+ * @BIT_CLK_512: 512 Kbits clock.
+ * @BIT_CLK_768: 768 Kbits clock.
+ * @BIT_CLK_1024: 1024 Kbits clock.
+ * @BIT_CLK_1411_76: 1411.76 Kbits clock.
+ * @BIT_CLK_1536: 1536 Kbits clock.
+ * @BIT_CLK_2000: 2000 Kbits clock.
+ * @BIT_CLK_2048: 2048 Kbits clock.
+ * @BIT_CLK_2400: 2400 Kbits clock.
+ * @BIT_CLK_2823_52: 2823.52 Kbits clock.
+ * @BIT_CLK_3072: 3072 Kbits clock.
+ *
+ * This parameter sets the bit clock speed. This is the clocking of the actual
+ * data. A usual parameter for eSCO voice is 512 kHz.
+ */
+enum cg2900_dai_bit_clk {
+ BIT_CLK_128 = 0x00,
+ BIT_CLK_256 = 0x01,
+ BIT_CLK_512 = 0x02,
+ BIT_CLK_768 = 0x03,
+ BIT_CLK_1024 = 0x04,
+ BIT_CLK_1411_76 = 0x05,
+ BIT_CLK_1536 = 0x06,
+ BIT_CLK_2000 = 0x07,
+ BIT_CLK_2048 = 0x08,
+ BIT_CLK_2400 = 0x09,
+ BIT_CLK_2823_52 = 0x0A,
+ BIT_CLK_3072 = 0x0B
+};
+
+/**
+ * enum cg2900_dai_sample_rate - Sample rates alternatives.
+ * @SAMPLE_RATE_8: 8 kHz sample rate.
+ * @SAMPLE_RATE_16: 16 kHz sample rate.
+ * @SAMPLE_RATE_44_1: 44.1 kHz sample rate.
+ * @SAMPLE_RATE_48: 48 kHz sample rate.
+ */
+enum cg2900_dai_sample_rate {
+ SAMPLE_RATE_8 = 0,
+ SAMPLE_RATE_16 = 1,
+ SAMPLE_RATE_44_1 = 2,
+ SAMPLE_RATE_48 = 3
+};
+
+/**
+ * enum cg2900_dai_port_protocol - Port protocol alternatives.
+ * @PORT_PROTOCOL_PCM: Protocol PCM.
+ * @PORT_PROTOCOL_I2S: Protocol I2S.
+ */
+enum cg2900_dai_port_protocol {
+ PORT_PROTOCOL_PCM = 0x00,
+ PORT_PROTOCOL_I2S = 0x01
+};
+
+/**
+ * enum cg2900_dai_channel_sel - The channel selection alternatives.
+ * @CHANNEL_SELECTION_RIGHT: Right channel used.
+ * @CHANNEL_SELECTION_LEFT: Left channel used.
+ * @CHANNEL_SELECTION_BOTH: Both channels used.
+ */
+enum cg2900_dai_channel_sel {
+ CHANNEL_SELECTION_RIGHT = 0x00,
+ CHANNEL_SELECTION_LEFT = 0x01,
+ CHANNEL_SELECTION_BOTH = 0x02
+};
+
+/**
+ * struct cg2900_dai_conf_i2s_pcm - Port configuration structure.
+ * @mode: Operational mode of the port configured.
+ * @i2s_channel_sel: I2S channels used. Only valid if used in I2S mode.
+ * @slot_0_used: True if SCO slot 0 is used.
+ * @slot_1_used: True if SCO slot 1 is used.
+ * @slot_2_used: True if SCO slot 2 is used.
+ * @slot_3_used: True if SCO slot 3 is used.
+ * @slot_0_dir: Direction of slot 0.
+ * @slot_1_dir: Direction of slot 1.
+ * @slot_2_dir: Direction of slot 2.
+ * @slot_3_dir: Direction of slot 3.
+ * @slot_0_start: Slot 0 start (relative to the PCM frame sync).
+ * @slot_1_start: Slot 1 start (relative to the PCM frame sync)
+ * @slot_2_start: Slot 2 start (relative to the PCM frame sync)
+ * @slot_3_start: Slot 3 start (relative to the PCM frame sync)
+ * @ratio: Voice stream ratio between the Audio stream sample rate
+ * and the Voice stream sample rate.
+ * @protocol: Protocol used on port.
+ * @duration: Frame sync duration.
+ * @clk: Bit clock.
+ * @sample_rate: Sample rate.
+ */
+struct cg2900_dai_conf_i2s_pcm {
+ enum cg2900_dai_mode mode;
+ enum cg2900_dai_channel_sel i2s_channel_sel;
+ bool slot_0_used;
+ bool slot_1_used;
+ bool slot_2_used;
+ bool slot_3_used;
+ enum cg2900_dai_dir slot_0_dir;
+ enum cg2900_dai_dir slot_1_dir;
+ enum cg2900_dai_dir slot_2_dir;
+ enum cg2900_dai_dir slot_3_dir;
+ __u8 slot_0_start;
+ __u8 slot_1_start;
+ __u8 slot_2_start;
+ __u8 slot_3_start;
+ enum cg2900_dai_stream_ratio ratio;
+ enum cg2900_dai_port_protocol protocol;
+ enum cg2900_dai_fs_duration duration;
+ enum cg2900_dai_bit_clk clk;
+ enum cg2900_dai_sample_rate sample_rate;
+};
+
+/**
+ * enum cg2900_dai_half_period - Half period duration alternatives.
+ * @HALF_PER_DUR_8: 8 Bits.
+ * @HALF_PER_DUR_16: 16 Bits.
+ * @HALF_PER_DUR_24: 24 Bits.
+ * @HALF_PER_DUR_25: 25 Bits.
+ * @HALF_PER_DUR_32: 32 Bits.
+ * @HALF_PER_DUR_48: 48 Bits.
+ * @HALF_PER_DUR_64: 64 Bits.
+ * @HALF_PER_DUR_75: 75 Bits.
+ * @HALF_PER_DUR_96: 96 Bits.
+ * @HALF_PER_DUR_128: 128 Bits.
+ * @HALF_PER_DUR_150: 150 Bits.
+ * @HALF_PER_DUR_192: 192 Bits.
+ *
+ * This parameter sets the number of bits contained in each I2S half period,
+ * i.e. each channel slot. A usual value is 16 bits.
+ */
+enum cg2900_dai_half_period {
+ HALF_PER_DUR_8 = 0x00,
+ HALF_PER_DUR_16 = 0x01,
+ HALF_PER_DUR_24 = 0x02,
+ HALF_PER_DUR_25 = 0x03,
+ HALF_PER_DUR_32 = 0x04,
+ HALF_PER_DUR_48 = 0x05,
+ HALF_PER_DUR_64 = 0x06,
+ HALF_PER_DUR_75 = 0x07,
+ HALF_PER_DUR_96 = 0x08,
+ HALF_PER_DUR_128 = 0x09,
+ HALF_PER_DUR_150 = 0x0A,
+ HALF_PER_DUR_192 = 0x0B
+};
+
+/**
+ * enum cg2900_dai_word_width - Word width alternatives.
+ * @WORD_WIDTH_16: 16 bits words.
+ * @WORD_WIDTH_32: 32 bits words.
+ */
+enum cg2900_dai_word_width {
+ WORD_WIDTH_16 = 0x00,
+ WORD_WIDTH_32 = 0x01
+};
+
+/**
+ * struct cg2900_dai_conf_i2s - Port configuration struct for I2S.
+ * @mode: Operational mode of the port.
+ * @half_period: Half period duration.
+ * @channel_sel: Channel selection.
+ * @sample_rate: Sample rate.
+ * @word_width: Word width.
+ */
+struct cg2900_dai_conf_i2s {
+ enum cg2900_dai_mode mode;
+ enum cg2900_dai_half_period half_period;
+ enum cg2900_dai_channel_sel channel_sel;
+ enum cg2900_dai_sample_rate sample_rate;
+ enum cg2900_dai_word_width word_width;
+};
+
+/**
+ * union cg2900_dai_port_conf - DAI port configuration union.
+ * @i2s: The configuration struct for a port supporting only I2S.
+ * @i2s_pcm: The configuration struct for a port supporting both PCM and I2S.
+ */
+union cg2900_dai_port_conf {
+ struct cg2900_dai_conf_i2s i2s;
+ struct cg2900_dai_conf_i2s_pcm i2s_pcm;
+};
+
+/**
+ * enum cg2900_dai_ext_port_id - DAI external port id alternatives.
+ * @PORT_0_I2S: Port id is 0 and it supports only I2S.
+ * @PORT_1_I2S_PCM: Port id is 1 and it supports both I2S and PCM.
+ */
+enum cg2900_dai_ext_port_id {
+ PORT_0_I2S,
+ PORT_1_I2S_PCM
+};
+
+/**
+ * enum cg2900_audio_endpoint_id - Audio endpoint id alternatives.
+ * @ENDPOINT_PORT_0_I2S: Internal audio endpoint of the external I2S
+ * interface.
+ * @ENDPOINT_PORT_1_I2S_PCM: Internal audio endpoint of the external I2S/PCM
+ * interface.
+ * @ENDPOINT_SLIMBUS_VOICE: Internal audio endpoint of the external Slimbus
+ * voice interface. (Currently not supported)
+ * @ENDPOINT_SLIMBUS_AUDIO: Internal audio endpoint of the external Slimbus
+ * audio interface. (Currently not supported)
+ * @ENDPOINT_BT_SCO_INOUT: Bluetooth SCO bidirectional.
+ * @ENDPOINT_BT_A2DP_SRC: Bluetooth A2DP source.
+ * @ENDPOINT_BT_A2DP_SNK: Bluetooth A2DP sink.
+ * @ENDPOINT_FM_RX: FM receive.
+ * @ENDPOINT_FM_TX: FM transmit.
+ * @ENDPOINT_ANALOG_OUT: Analog out.
+ * @ENDPOINT_DSP_AUDIO_IN: DSP audio in.
+ * @ENDPOINT_DSP_AUDIO_OUT: DSP audio out.
+ * @ENDPOINT_DSP_VOICE_IN: DSP voice in.
+ * @ENDPOINT_DSP_VOICE_OUT: DSP voice out.
+ * @ENDPOINT_DSP_TONE_IN: DSP tone in.
+ * @ENDPOINT_BURST_BUFFER_IN: Burst buffer in.
+ * @ENDPOINT_BURST_BUFFER_OUT: Burst buffer out.
+ * @ENDPOINT_MUSIC_DECODER: Music decoder.
+ * @ENDPOINT_HCI_AUDIO_IN: HCI audio in.
+ */
+enum cg2900_audio_endpoint_id {
+ ENDPOINT_PORT_0_I2S,
+ ENDPOINT_PORT_1_I2S_PCM,
+ ENDPOINT_SLIMBUS_VOICE,
+ ENDPOINT_SLIMBUS_AUDIO,
+ ENDPOINT_BT_SCO_INOUT,
+ ENDPOINT_BT_A2DP_SRC,
+ ENDPOINT_BT_A2DP_SNK,
+ ENDPOINT_FM_RX,
+ ENDPOINT_FM_TX,
+ ENDPOINT_ANALOG_OUT,
+ ENDPOINT_DSP_AUDIO_IN,
+ ENDPOINT_DSP_AUDIO_OUT,
+ ENDPOINT_DSP_VOICE_IN,
+ ENDPOINT_DSP_VOICE_OUT,
+ ENDPOINT_DSP_TONE_IN,
+ ENDPOINT_BURST_BUFFER_IN,
+ ENDPOINT_BURST_BUFFER_OUT,
+ ENDPOINT_MUSIC_DECODER,
+ ENDPOINT_HCI_AUDIO_IN
+};
+
+/**
+ * struct cg2900_dai_config - Configuration struct for Digital Audio Interface.
+ * @port: The port id to configure. Acts as a discriminator for @conf parameter
+ * which is a union.
+ * @conf: The configuration union that contains the parameters for the port.
+ */
+struct cg2900_dai_config {
+ enum cg2900_dai_ext_port_id port;
+ union cg2900_dai_port_conf conf;
+};
+
+/*
+ * Endpoint configuration types
+ */
+
+/**
+ * enum cg2900_endpoint_sample_rate - Audio endpoint configuration sample rate alternatives.
+ *
+ * This enum defines the same values as @cg2900_dai_sample_rate, but
+ * is kept to preserve the API.
+ *
+ * @ENDPOINT_SAMPLE_RATE_8_KHZ: 8 kHz sample rate.
+ * @ENDPOINT_SAMPLE_RATE_16_KHZ: 16 kHz sample rate.
+ * @ENDPOINT_SAMPLE_RATE_44_1_KHZ: 44.1 kHz sample rate.
+ * @ENDPOINT_SAMPLE_RATE_48_KHZ: 48 kHz sample rate.
+ */
+enum cg2900_endpoint_sample_rate {
+ ENDPOINT_SAMPLE_RATE_8_KHZ = SAMPLE_RATE_8,
+ ENDPOINT_SAMPLE_RATE_16_KHZ = SAMPLE_RATE_16,
+ ENDPOINT_SAMPLE_RATE_44_1_KHZ = SAMPLE_RATE_44_1,
+ ENDPOINT_SAMPLE_RATE_48_KHZ = SAMPLE_RATE_48
+};
+
+
+/**
+ * struct cg2900_endpoint_config_a2dp_src - A2DP source audio endpoint configurations.
+ * @sample_rate: Sample rate.
+ * @channel_count: Number of channels.
+ */
+struct cg2900_endpoint_config_a2dp_src {
+ enum cg2900_endpoint_sample_rate sample_rate;
+ unsigned int channel_count;
+};
+
+/**
+ * struct cg2900_endpoint_config_fm - Configuration parameters for an FM endpoint.
+ * @sample_rate: The sample rate alternatives for the FM audio endpoints.
+ */
+struct cg2900_endpoint_config_fm {
+ enum cg2900_endpoint_sample_rate sample_rate;
+};
+
+
+/**
+ * struct cg2900_endpoint_config_sco_in_out - SCO audio endpoint configuration structure.
+ * @sample_rate: Sample rate, valid values are
+ * * ENDPOINT_SAMPLE_RATE_8_KHZ
+ * * ENDPOINT_SAMPLE_RATE_16_KHZ.
+ */
+struct cg2900_endpoint_config_sco_in_out {
+ enum cg2900_endpoint_sample_rate sample_rate;
+};
+
+/**
+ * union cg2900_endpoint_config - Different audio endpoint configurations.
+ * @sco: SCO audio endpoint configuration structure.
+ * @a2dp_src: A2DP source audio endpoint configuration structure.
+ * @fm: FM audio endpoint configuration structure.
+ */
+union cg2900_endpoint_config_union {
+ struct cg2900_endpoint_config_sco_in_out sco;
+ struct cg2900_endpoint_config_a2dp_src a2dp_src;
+ struct cg2900_endpoint_config_fm fm;
+};
+
+/**
+ * struct cg2900_endpoint_config - Audio endpoint configuration.
+ * @endpoint_id: Identifies the audio endpoint. Works as a discriminator
+ * for the config union.
+ * @config: Union holding the configuration parameters for
+ * the endpoint.
+ */
+struct cg2900_endpoint_config {
+ enum cg2900_audio_endpoint_id endpoint_id;
+ union cg2900_endpoint_config_union config;
+};
+
+#ifdef __KERNEL__
+#include <linux/device.h>
+
+int cg2900_audio_get_devices(struct device *devices[], __u8 size);
+int cg2900_audio_open(unsigned int *session, struct device *parent);
+int cg2900_audio_close(unsigned int *session);
+int cg2900_audio_set_dai_config(unsigned int session,
+ struct cg2900_dai_config *config);
+int cg2900_audio_get_dai_config(unsigned int session,
+ struct cg2900_dai_config *config);
+int cg2900_audio_config_endpoint(unsigned int session,
+ struct cg2900_endpoint_config *config);
+int cg2900_audio_start_stream(unsigned int session,
+ enum cg2900_audio_endpoint_id ep_1,
+ enum cg2900_audio_endpoint_id ep_2,
+ unsigned int *stream_handle);
+int cg2900_audio_stop_stream(unsigned int session,
+ unsigned int stream_handle);
+
+#endif /* __KERNEL__ */
+#endif /* _CG2900_AUDIO_H_ */
diff --git a/drivers/staging/cg2900/include/cg2900_hci.h b/drivers/staging/cg2900/include/cg2900_hci.h
new file mode 100644
index 0000000..e094a9d
--- /dev/null
+++ b/drivers/staging/cg2900/include/cg2900_hci.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * This file is a staging solution and shall be integrated into
+ * /include/net/bluetooth/hci.h.
+ */
+
+#ifndef __CG2900_HCI_H
+#define __CG2900_HCI_H
+
+#define HCI_EV_HW_ERROR 0x10
+struct hci_ev_hw_error {
+ __u8 hw_code;
+} __packed;
+
+#endif /* __CG2900_HCI_H */
diff --git a/drivers/staging/cg2900/mfd/Makefile b/drivers/staging/cg2900/mfd/Makefile
new file mode 100644
index 0000000..bdbd8de
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/Makefile
@@ -0,0 +1,18 @@
+#
+# Makefile for ST-Ericsson CG2900 connectivity combo controller
+#
+
+ccflags-y := \
+ -Idrivers/staging/cg2900/include
+
+obj-$(CONFIG_CG2900) += cg2900_core.o cg2900_lib.o
+export-objs := cg2900_core.o cg2900_lib.o
+
+obj-$(CONFIG_CG2900) += cg2900_char_devices.o
+
+obj-$(CONFIG_CG2900_TEST) += cg2900_test.o
+
+obj-$(CONFIG_CG2900_CHIP) += cg2900_chip.o
+obj-$(CONFIG_STLC2690_CHIP) += stlc2690_chip.o
+
+obj-$(CONFIG_CG2900_AUDIO) += cg2900_audio.o
diff --git a/drivers/staging/cg2900/mfd/cg2900_audio.c b/drivers/staging/cg2900/mfd/cg2900_audio.c
new file mode 100644
index 0000000..6eadd96
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_audio.c
@@ -0,0 +1,3462 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth Audio Driver for ST-Ericsson CG2900 controller.
+ */
+#define NAME "cg2900_audio"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/types.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+
+#include "cg2900.h"
+#include "cg2900_audio.h"
+#include "cg2900_chip.h"
+
+#define MAX_NBR_OF_USERS 10
+#define FIRST_USER 1
+
+#define DEFAULT_SCO_HANDLE 0x0008
+
+/* Use a timeout of 5 seconds when waiting for a command response */
+#define RESP_TIMEOUT 5000
+
+#define BT_DEV (info->dev_bt)
+#define FM_DEV (info->dev_fm)
+
+/* Bluetooth error codes */
+#define HCI_BT_ERROR_NO_ERROR 0x00
+
+/* Used to select proper API, ignoring subrevisions etc */
+enum chip_revision {
+ CHIP_REV_PG1,
+ CHIP_REV_PG2
+};
+
+/**
+ * enum chip_resp_state - State when communicating with the CG2900 controller.
+ * @IDLE: No outstanding packets to the controller.
+ * @WAITING: Packet has been sent to the controller. Waiting for
+ * response.
+ * @RESP_RECEIVED: Response from controller has been received but not yet
+ * handled.
+ */
+enum chip_resp_state {
+ IDLE,
+ WAITING,
+ RESP_RECEIVED
+};
+
+/**
+ * enum main_state - Main state for the CG2900 Audio driver.
+ * @OPENED: Audio driver has registered to CG2900 Core.
+ * @CLOSED: Audio driver is not registered to CG2900 Core.
+ * @RESET: A reset of CG2900 Core has occurred and no user has re-opened
+ * the audio driver.
+ */
+enum main_state {
+ OPENED,
+ CLOSED,
+ RESET
+};
+
+/**
+ * struct endpoint_list - List for storing endpoint configuration nodes.
+ * @ep_list: Pointer to first node in list.
+ * @management_mutex: Mutex for handling access to list.
+ */
+struct endpoint_list {
+ struct list_head ep_list;
+ struct mutex management_mutex;
+};
+
+/**
+ * struct endpoint_config_node - Node for storing endpoint configuration.
+ * @list: list_head struct.
+ * @endpoint_id: Endpoint ID.
+ * @config: Stored configuration for this endpoint.
+ */
+struct endpoint_config_node {
+ struct list_head list;
+ enum cg2900_audio_endpoint_id endpoint_id;
+ union cg2900_endpoint_config_union config;
+};
+
+/**
+ * struct audio_info - Main CG2900 Audio driver info structure.
+ * @list: list_head struct.
+ * @state: Current state of the CG2900 Audio driver.
+ * @revision: Chip revision, used to select API.
+ * @misc_dev: The misc device created by this driver.
+ * @misc_registered: True if misc device is registered.
+ * @parent: Parent device.
+ * @dev_bt: Device registered by this driver for the BT
+ * audio channel.
+ * @dev_fm: Device registered by this driver for the FM
+ * audio channel.
+ * @management_mutex: Mutex for handling access to CG2900 Audio driver
+ * management.
+ * @bt_mutex: Mutex for handling access to BT audio channel.
+ * @fm_mutex: Mutex for handling access to FM audio channel.
+ * @nbr_of_users_active: Number of sessions open in the CG2900 Audio
+ * driver.
+ * @i2s_config: DAI I2S configuration.
+ * @i2s_pcm_config: DAI PCM_I2S configuration.
+ * @i2s_config_known: @true if @i2s_config has been set,
+ * @false otherwise.
+ * @i2s_pcm_config_known: @true if @i2s_pcm_config has been set,
+ * @false otherwise.
+ * @endpoints: List containing the endpoint configurations.
+ * @stream_ids: Bitmask for in-use stream ids (only used with
+ * PG2 chip API).
+ */
+struct audio_info {
+ struct list_head list;
+ enum main_state state;
+ enum chip_revision revision;
+ struct miscdevice misc_dev;
+ bool misc_registered;
+ struct device *parent;
+ struct device *dev_bt;
+ struct device *dev_fm;
+ struct mutex management_mutex;
+ struct mutex bt_mutex;
+ struct mutex fm_mutex;
+ int nbr_of_users_active;
+ struct cg2900_dai_conf_i2s i2s_config;
+ struct cg2900_dai_conf_i2s_pcm i2s_pcm_config;
+ bool i2s_config_known;
+ bool i2s_pcm_config_known;
+ struct endpoint_list endpoints;
+ u8 stream_ids[16];
+};
+
+/**
+ * struct audio_user - CG2900 audio user info structure.
+ * @session: Stored session for the char device.
+ * @resp_state: State for controller communications.
+ * @info: CG2900 audio info structure.
+ */
+struct audio_user {
+ int session;
+ enum chip_resp_state resp_state;
+ struct audio_info *info;
+};
+
+/**
+ * struct audio_cb_info - Callback info structure registered in @user_data.
+ * @user: Audio user currently awaiting data on the channel.
+ * @wq: Wait queue for this channel.
+ * @skb_queue: Sk buffer queue.
+ */
+struct audio_cb_info {
+ struct audio_user *user;
+ wait_queue_head_t wq;
+ struct sk_buff_head skb_queue;
+};
+
+/**
+ * struct char_dev_info - CG2900 character device info structure.
+ * @session: Stored session for the char device.
+ * @stored_data: Data returned when executing last command, if any.
+ * @stored_data_len: Length of @stored_data in bytes.
+ * @management_mutex: Mutex for handling access to char dev management.
+ * @rw_mutex: Mutex for handling access to char dev writes and reads.
+ * @info: CG2900 audio info struct.
+ * @rx_queue: Data queue.
+ */
+struct char_dev_info {
+ int session;
+ u8 *stored_data;
+ int stored_data_len;
+ struct mutex management_mutex;
+ struct mutex rw_mutex;
+ struct audio_info *info;
+ struct sk_buff_head rx_queue;
+};
+
+/*
+ * cg2900_audio_devices - List of active CG2900 audio devices.
+ */
+LIST_HEAD(cg2900_audio_devices);
+
+/*
+ * cg2900_audio_sessions - Pointers to currently opened sessions (maps
+ * session ID to user info).
+ */
+static struct audio_user *cg2900_audio_sessions[MAX_NBR_OF_USERS];
+
+/*
+ * Internal conversion functions
+ *
+ * Since the CG2900 APIs uses several different ways to encode the
+ * same parameter in different cases, we have to use translator
+ * functions.
+ */
+
+/**
+ * session_config_sample_rate() - Convert sample rate to format used in VS_Set_SessionConfiguration.
+ * @rate: Sample rate in API encoding.
+ */
+static u8 session_config_sample_rate(enum cg2900_endpoint_sample_rate rate)
+{
+ static const u8 codes[] = {
+ [ENDPOINT_SAMPLE_RATE_8_KHZ] = CG2900_BT_SESSION_RATE_8K,
+ [ENDPOINT_SAMPLE_RATE_16_KHZ] = CG2900_BT_SESSION_RATE_16K,
+ [ENDPOINT_SAMPLE_RATE_44_1_KHZ] = CG2900_BT_SESSION_RATE_44_1K,
+ [ENDPOINT_SAMPLE_RATE_48_KHZ] = CG2900_BT_SESSION_RATE_48K
+ };
+
+ return codes[rate];
+}
+
+/**
+ * mc_i2s_sample_rate() - Convert sample rate to format used in VS_Port_Config for I2S.
+ * @rate: Sample rate in API encoding.
+ */
+static u8 mc_i2s_sample_rate(enum cg2900_dai_sample_rate rate)
+{
+ static const u8 codes[] = {
+ [SAMPLE_RATE_8] = CG2900_MC_I2S_SAMPLE_RATE_8,
+ [SAMPLE_RATE_16] = CG2900_MC_I2S_SAMPLE_RATE_16,
+ [SAMPLE_RATE_44_1] = CG2900_MC_I2S_SAMPLE_RATE_44_1,
+ [SAMPLE_RATE_48] = CG2900_MC_I2S_SAMPLE_RATE_48
+ };
+
+ return codes[rate];
+}
+
+/**
+ * mc_pcm_sample_rate() - Convert sample rate to format used in VS_Port_Config for PCM/I2S.
+ * @rate: Sample rate in API encoding.
+ */
+static u8 mc_pcm_sample_rate(enum cg2900_dai_sample_rate rate)
+{
+ static const u8 codes[] = {
+ [SAMPLE_RATE_8] = CG2900_MC_PCM_SAMPLE_RATE_8,
+ [SAMPLE_RATE_16] = CG2900_MC_PCM_SAMPLE_RATE_16,
+ [SAMPLE_RATE_44_1] = CG2900_MC_PCM_SAMPLE_RATE_44_1,
+ [SAMPLE_RATE_48] = CG2900_MC_PCM_SAMPLE_RATE_48
+ };
+
+ return codes[rate];
+}
+
+/**
+ * mc_i2s_channel_select() - Convert channel selection to format used in VS_Port_Config.
+ * @sel: Channel selection in API encoding.
+ */
+static u8 mc_i2s_channel_select(enum cg2900_dai_channel_sel sel)
+{
+ static const u8 codes[] = {
+ [CHANNEL_SELECTION_RIGHT] = CG2900_MC_I2S_RIGHT_CHANNEL,
+ [CHANNEL_SELECTION_LEFT] = CG2900_MC_I2S_LEFT_CHANNEL,
+ [CHANNEL_SELECTION_BOTH] = CG2900_MC_I2S_BOTH_CHANNELS
+ };
+ return codes[sel];
+}
+
+/**
+ * get_fs_duration() - Convert framesync-enumeration to real value.
+ * @duration: Framsync duration (API encoding).
+ *
+ * Returns:
+ * Duration in bits.
+ */
+static u16 get_fs_duration(enum cg2900_dai_fs_duration duration)
+{
+ static const u16 values[] = {
+ [SYNC_DURATION_8] = 8,
+ [SYNC_DURATION_16] = 16,
+ [SYNC_DURATION_24] = 24,
+ [SYNC_DURATION_32] = 32,
+ [SYNC_DURATION_48] = 48,
+ [SYNC_DURATION_50] = 50,
+ [SYNC_DURATION_64] = 64,
+ [SYNC_DURATION_75] = 75,
+ [SYNC_DURATION_96] = 96,
+ [SYNC_DURATION_125] = 125,
+ [SYNC_DURATION_128] = 128,
+ [SYNC_DURATION_150] = 150,
+ [SYNC_DURATION_192] = 192,
+ [SYNC_DURATION_250] = 250,
+ [SYNC_DURATION_256] = 256,
+ [SYNC_DURATION_300] = 300,
+ [SYNC_DURATION_384] = 384,
+ [SYNC_DURATION_500] = 500,
+ [SYNC_DURATION_512] = 512,
+ [SYNC_DURATION_600] = 600,
+ [SYNC_DURATION_768] = 768
+ };
+ return values[duration];
+}
+
+/**
+ * mc_i2s_role() - Convert master/slave encoding to format for I2S-ports.
+ * @mode: Master/slave in API encoding.
+ */
+static u8 mc_i2s_role(enum cg2900_dai_mode mode)
+{
+ if (mode == DAI_MODE_SLAVE)
+ return CG2900_I2S_MODE_SLAVE;
+ else
+ return CG2900_I2S_MODE_MASTER;
+}
+
+/**
+ * mc_pcm_role() - Convert master/slave encoding to format for PCM/I2S-port.
+ * @mode: Master/slave in API encoding.
+ */
+static u8 mc_pcm_role(enum cg2900_dai_mode mode)
+{
+ if (mode == DAI_MODE_SLAVE)
+ return CG2900_PCM_MODE_SLAVE;
+ else
+ return CG2900_PCM_MODE_MASTER;
+}
+
+/**
+ * fm_get_conversion() - Convert sample rate to convert up/down used in X_Set_Control FM commands.
+ * @srate: Sample rate.
+ */
+static u16 fm_get_conversion(enum cg2900_endpoint_sample_rate srate)
+{
+ if (srate >= ENDPOINT_SAMPLE_RATE_44_1_KHZ)
+ return CG2900_FM_CMD_SET_CTRL_CONV_UP;
+ else
+ return CG2900_FM_CMD_SET_CTRL_CONV_DOWN;
+}
+
+/**
+ * get_info() - Return info structure for this device.
+ * @dev: Current device.
+ *
+ * This function returns the info structure on the following basis:
+ * * If dev is NULL return first info struct found. If none is found return
+ * NULL.
+ * * If dev is valid we will return corresponding info struct if dev is the
+ * parent of the info struct or if dev's parent is the parent of the info
+ * struct.
+ * * If dev is valid and no info structure is found, a new info struct is
+ * allocated, initialized, and returned.
+ *
+ * Returns:
+ * Pointer to info struct if there is no error.
+ * NULL if NULL was supplied and no info structure exist.
+ * ERR_PTR(-ENOMEM) if allocation fails.
+ */
+static struct audio_info *get_info(struct device *dev)
+{
+ struct list_head *cursor;
+ struct audio_info *tmp;
+ struct audio_info *info = NULL;
+
+ /*
+ * Find the info structure for dev. If NULL is supplied for dev
+ * just return first device found.
+ */
+ list_for_each(cursor, &cg2900_audio_devices) {
+ tmp = list_entry(cursor, struct audio_info, list);
+ if (!dev || tmp->parent == dev->parent || tmp->parent == dev) {
+ info = tmp;
+ break;
+ }
+ }
+
+ if (!dev || info)
+ return info;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(dev, "Could not allocate info struct\n");
+ return ERR_PTR(-ENOMEM);
+ }
+ info->parent = dev->parent;
+
+ /* Initiate the mutexes */
+ mutex_init(&(info->management_mutex));
+ mutex_init(&(info->bt_mutex));
+ mutex_init(&(info->fm_mutex));
+ mutex_init(&(info->endpoints.management_mutex));
+
+ /* Initiate the endpoint list */
+ INIT_LIST_HEAD(&info->endpoints.ep_list);
+
+ list_add_tail(&info->list, &cg2900_audio_devices);
+
+ dev_info(dev, "CG2900 device added\n");
+ return info;
+}
+
+/**
+ * flush_endpoint_list() - Deletes all stored endpoints in @list.
+ * @list: List of endpoints.
+ */
+static void flush_endpoint_list(struct endpoint_list *list)
+{
+ struct list_head *cursor, *next;
+ struct endpoint_config_node *tmp;
+
+ mutex_lock(&list->management_mutex);
+ list_for_each_safe(cursor, next, &(list->ep_list)) {
+ tmp = list_entry(cursor, struct endpoint_config_node, list);
+ list_del(cursor);
+ kfree(tmp);
+ }
+ mutex_unlock(&list->management_mutex);
+}
+
+/**
+ * device_removed() - Remove device from list if there are no channels left.
+ * @info: CG2900 audio info structure.
+ */
+static void device_removed(struct audio_info *info)
+{
+ struct list_head *cursor;
+ struct audio_info *tmp;
+
+ if (info->dev_bt || info->dev_fm)
+ /* There are still devices active */
+ return;
+
+ /* Find the stored info structure */
+ list_for_each(cursor, &cg2900_audio_devices) {
+ tmp = list_entry(cursor, struct audio_info, list);
+ if (tmp == info) {
+ list_del(cursor);
+ break;
+ }
+ }
+
+ flush_endpoint_list(&info->endpoints);
+
+ mutex_destroy(&info->management_mutex);
+ mutex_destroy(&info->bt_mutex);
+ mutex_destroy(&info->fm_mutex);
+ mutex_destroy(&info->endpoints.management_mutex);
+
+ kfree(info);
+ pr_info("CG2900 Audio device removed");
+}
+
+/**
+ * read_cb() - Handle data received from STE connectivity driver.
+ * @dev: Device receiving data.
+ * @skb: Buffer with data coming form device.
+ */
+static void read_cb(struct cg2900_user_data *dev, struct sk_buff *skb)
+{
+ struct audio_cb_info *cb_info;
+
+ cb_info = cg2900_get_usr(dev);
+
+ if (!(cb_info->user)) {
+ dev_err(dev->dev, "NULL supplied as cb_info->user\n");
+ return;
+ }
+
+ /* Mark that packet has been received */
+ dev_dbg(dev->dev, "New resp_state: RESP_RECEIVED");
+ cb_info->user->resp_state = RESP_RECEIVED;
+ skb_queue_tail(&cb_info->skb_queue, skb);
+ wake_up_all(&cb_info->wq);
+}
+
+/**
+ * reset_cb() - Reset callback function.
+ * @dev: CG2900_Core device resetting.
+ */
+static void reset_cb(struct cg2900_user_data *dev)
+{
+ struct audio_info *info;
+
+ dev_dbg(dev->dev, "reset_cb\n");
+
+ info = dev_get_drvdata(dev->dev);
+ mutex_lock(&info->management_mutex);
+ info->nbr_of_users_active = 0;
+ info->state = RESET;
+ mutex_unlock(&info->management_mutex);
+}
+
+/**
+ * get_session_user() - Check that supplied session is within valid range.
+ * @session: Session ID.
+ *
+ * Returns:
+ * Audio_user if there is no error.
+ * NULL for bad session ID.
+ */
+static struct audio_user *get_session_user(int session)
+{
+ struct audio_user *audio_user;
+
+ if (session < FIRST_USER || session >= MAX_NBR_OF_USERS) {
+ pr_err("Calling with invalid session %d", session);
+ return NULL;
+ }
+
+ audio_user = cg2900_audio_sessions[session];
+ if (!audio_user)
+ pr_err("Calling with non-opened session %d", session);
+ return audio_user;
+}
+
+/**
+ * del_endpoint_private() - Deletes an endpoint from @list.
+ * @endpoint_id: Endpoint ID.
+ * @list: List of endpoints.
+ *
+ * Deletes an endpoint from the supplied endpoint list.
+ * This function is not protected by any semaphore.
+ */
+static void del_endpoint_private(enum cg2900_audio_endpoint_id endpoint_id,
+ struct endpoint_list *list)
+{
+ struct list_head *cursor, *next;
+ struct endpoint_config_node *tmp;
+
+ list_for_each_safe(cursor, next, &(list->ep_list)) {
+ tmp = list_entry(cursor, struct endpoint_config_node, list);
+ if (tmp->endpoint_id == endpoint_id) {
+ list_del(cursor);
+ kfree(tmp);
+ }
+ }
+}
+
+/**
+ * add_endpoint() - Add endpoint node to @list.
+ * @ep_config: Endpoint configuration.
+ * @list: List of endpoints.
+ *
+ * Add endpoint node to the supplied list and copies supplied config to node.
+ * If a node already exists for the supplied endpoint, the old node is removed
+ * and replaced by the new node.
+ */
+static void add_endpoint(struct cg2900_endpoint_config *ep_config,
+ struct endpoint_list *list)
+{
+ struct endpoint_config_node *item;
+
+ item = kzalloc(sizeof(*item), GFP_KERNEL);
+ if (!item) {
+ pr_err("add_endpoint: Failed to alloc memory");
+ return;
+ }
+
+ /* Store values */
+ item->endpoint_id = ep_config->endpoint_id;
+ memcpy(&(item->config), &(ep_config->config), sizeof(item->config));
+
+ mutex_lock(&(list->management_mutex));
+
+ /*
+ * Check if endpoint ID already exist in list.
+ * If that is the case, remove it.
+ */
+ if (!list_empty(&(list->ep_list)))
+ del_endpoint_private(ep_config->endpoint_id, list);
+
+ list_add_tail(&(item->list), &(list->ep_list));
+
+ mutex_unlock(&(list->management_mutex));
+}
+
+/**
+ * find_endpoint() - Finds endpoint identified by @endpoint_id in @list.
+ * @endpoint_id: Endpoint ID.
+ * @list: List of endpoints.
+ *
+ * Returns:
+ * Endpoint configuration if there is no error.
+ * NULL if no configuration can be found for @endpoint_id.
+ */
+static union cg2900_endpoint_config_union *
+find_endpoint(enum cg2900_audio_endpoint_id endpoint_id,
+ struct endpoint_list *list)
+{
+ struct list_head *cursor, *next;
+ struct endpoint_config_node *tmp;
+ struct endpoint_config_node *ret_ep = NULL;
+
+ mutex_lock(&list->management_mutex);
+ list_for_each_safe(cursor, next, &(list->ep_list)) {
+ tmp = list_entry(cursor, struct endpoint_config_node, list);
+ if (tmp->endpoint_id == endpoint_id) {
+ ret_ep = tmp;
+ break;
+ }
+ }
+ mutex_unlock(&list->management_mutex);
+
+ if (ret_ep)
+ return &(ret_ep->config);
+ else
+ return NULL;
+}
+
+/**
+ * new_stream_id() - Allocate a new stream id.
+ * @info: Current audio info struct.
+ *
+ * Returns:
+ * 0-127 new valid id.
+ * -ENOMEM if no id is available.
+ */
+static s8 new_stream_id(struct audio_info *info)
+{
+ int r;
+
+ mutex_lock(&info->management_mutex);
+
+ r = find_first_zero_bit(info->stream_ids,
+ 8 * sizeof(info->stream_ids));
+
+ if (r >= 8 * sizeof(info->stream_ids)) {
+ r = -ENOMEM;
+ goto out;
+ }
+
+ set_bit(r, (unsigned long int *)info->stream_ids);
+
+out:
+ mutex_unlock(&info->management_mutex);
+ return r;
+}
+
+/**
+ * release_stream_id() - Release a stream id.
+ * @info: Current audio info struct.
+ * @id: Stream to release.
+ */
+static void release_stream_id(struct audio_info *info, u8 id)
+{
+ if (id >= 8 * sizeof(info->stream_ids))
+ return;
+
+ mutex_lock(&info->management_mutex);
+ clear_bit(id, (unsigned long int *)info->stream_ids);
+ mutex_unlock(&info->management_mutex);
+}
+
+/**
+ * receive_fm_write_response() - Wait for and handle the response to an FM Legacy WriteCommand request.
+ * @audio_user: Audio user to check for.
+ * @command: FM command to wait for.
+ *
+ * This function first waits (up to 5 seconds) for a response to an FM
+ * write command and when one arrives, it checks that it is the one we
+ * are waiting for and also that no error has occurred.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int receive_fm_write_response(struct audio_user *audio_user,
+ u16 command)
+{
+ int err = 0;
+ int res;
+ struct sk_buff *skb;
+ struct fm_leg_cmd_cmpl *pkt;
+ u16 rsp_cmd;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = audio_user->info;
+ pf_data = dev_get_platdata(info->dev_fm);
+ cb_info = cg2900_get_usr(pf_data);
+
+ /*
+ * Wait for callback to receive command complete and then wake us up
+ * again.
+ */
+ res = wait_event_timeout(cb_info->wq,
+ audio_user->resp_state == RESP_RECEIVED,
+ msecs_to_jiffies(RESP_TIMEOUT));
+ if (!res) {
+ dev_err(FM_DEV, "Timeout while waiting for return packet\n");
+ return -ECOMM;
+ } else if (res < 0) {
+ dev_err(FM_DEV,
+ "Error %d occurred while waiting for return packet\n",
+ res);
+ return -ECOMM;
+ }
+
+ /* OK, now we should have received answer. Let's check it. */
+ skb = skb_dequeue_tail(&cb_info->skb_queue);
+ if (!skb) {
+ dev_err(FM_DEV, "No skb in queue when it should be there\n");
+ return -EIO;
+ }
+
+ pkt = (struct fm_leg_cmd_cmpl *)skb->data;
+
+ /* Check if we received the correct event */
+ if (pkt->opcode != CG2900_FM_GEN_ID_LEGACY) {
+ dev_err(FM_DEV,
+ "Received unknown FM packet. 0x%X %X %X %X %X\n",
+ skb->data[0], skb->data[1], skb->data[2],
+ skb->data[3], skb->data[4]);
+ err = -EIO;
+ goto error_handling_free_skb;
+ }
+
+ /* FM Legacy Command complete event */
+ rsp_cmd = cg2900_get_fm_cmd_id(le16_to_cpu(pkt->response_head));
+
+ if (pkt->fm_function != CG2900_FM_CMD_PARAM_WRITECOMMAND ||
+ rsp_cmd != command) {
+ dev_err(FM_DEV,
+ "Received unexpected packet func 0x%X cmd 0x%04X\n",
+ pkt->fm_function, rsp_cmd);
+ err = -EIO;
+ goto error_handling_free_skb;
+ }
+
+ if (pkt->cmd_status != CG2900_FM_CMD_STATUS_COMMAND_SUCCEEDED) {
+ dev_err(FM_DEV, "FM Command failed (%d)\n", pkt->cmd_status);
+ err = -EIO;
+ goto error_handling_free_skb;
+ }
+ /* Operation succeeded. We are now done */
+
+error_handling_free_skb:
+ kfree_skb(skb);
+ return err;
+}
+
+/**
+ * receive_bt_cmd_complete() - Wait for and handle an BT Command Complete event.
+ * @audio_user: Audio user to check for.
+ * @rsp: Opcode of BT command to wait for.
+ * @data: Pointer to buffer if any received data should be stored (except
+ * status).
+ * @data_len: Length of @data in bytes.
+ *
+ * This function first waits for BT Command Complete event (up to 5 seconds)
+ * and when one arrives, it checks that it is the one we are waiting for and
+ * also that no error has occurred.
+ * If @data is supplied it also copies received data into @data.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int receive_bt_cmd_complete(struct audio_user *audio_user, u16 rsp,
+ void *data, int data_len)
+{
+ int err = 0;
+ int res;
+ struct sk_buff *skb;
+ struct bt_cmd_cmpl_event *evt;
+ u16 opcode;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = audio_user->info;
+ pf_data = dev_get_platdata(info->dev_bt);
+ cb_info = cg2900_get_usr(pf_data);
+
+ /*
+ * Wait for callback to receive command complete and then wake us up
+ * again.
+ */
+ res = wait_event_timeout(cb_info->wq,
+ audio_user->resp_state == RESP_RECEIVED,
+ msecs_to_jiffies(RESP_TIMEOUT));
+ if (!res) {
+ dev_err(BT_DEV, "Timeout while waiting for return packet\n");
+ return -ECOMM;
+ } else if (res < 0) {
+ /* We timed out or an error occurred */
+ dev_err(BT_DEV,
+ "Error %d occurred while waiting for return packet\n",
+ res);
+ return -ECOMM;
+ }
+
+ /* OK, now we should have received answer. Let's check it. */
+ skb = skb_dequeue_tail(&cb_info->skb_queue);
+ if (!skb) {
+ dev_err(BT_DEV, "No skb in queue when it should be there\n");
+ return -EIO;
+ }
+
+ evt = (struct bt_cmd_cmpl_event *)skb->data;
+ if (evt->eventcode != HCI_EV_CMD_COMPLETE) {
+ dev_err(BT_DEV,
+ "We did not receive the event we expected (0x%X)\n",
+ evt->eventcode);
+ err = -EIO;
+ goto error_handling_free_skb;
+ }
+
+ opcode = le16_to_cpu(evt->opcode);
+ if (opcode != rsp) {
+ dev_err(BT_DEV,
+ "Received cmd complete for unexpected command: "
+ "0x%04X\n", opcode);
+ err = -EIO;
+ goto error_handling_free_skb;
+ }
+
+ if (evt->status != HCI_BT_ERROR_NO_ERROR) {
+ dev_err(BT_DEV, "Received command complete with err %d\n",
+ evt->status);
+ err = -EIO;
+ /*
+ * In data there might be more detailed error code.
+ * Let's copy it.
+ */
+ }
+
+ /*
+ * Copy the rest of the parameters if a buffer has been supplied.
+ * The caller must have set the length correctly.
+ */
+ if (data)
+ memcpy(data, evt->data, data_len);
+
+ /* Operation succeeded. We are now done */
+
+error_handling_free_skb:
+ kfree_skb(skb);
+ return err;
+}
+
+/**
+ * send_vs_delete_stream() - Delete an audio stream defined by @stream_handle.
+ * @audio_user: Audio user to check for.
+ * @stream_handle: Handle of the audio stream.
+ *
+ * This function is used to delete an audio stream defined by a stream
+ * handle.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -ENOMEM upon allocation errors.
+ * Errors from @cg2900_write.
+ * -EIO for other errors.
+ */
+static int send_vs_delete_stream(struct audio_user *audio_user,
+ unsigned int stream_handle)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ u16 opcode;
+ struct audio_info *info = audio_user->info;
+ struct cg2900_user_data *pf_data = dev_get_platdata(info->dev_bt);
+ struct audio_cb_info *cb_info = cg2900_get_usr(pf_data);
+
+ /* Now delete the stream - format command... */
+ if (info->revision == CHIP_REV_PG1) {
+ struct bt_vs_reset_session_cfg_cmd *cmd;
+
+ dev_dbg(BT_DEV, "BT: HCI_VS_Reset_Session_Configuration\n");
+
+ skb = pf_data->alloc_skb(sizeof(*cmd), GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "Could not allocate skb\n");
+ err = -ENOMEM;
+ return err;
+ }
+
+ cmd = (struct bt_vs_reset_session_cfg_cmd *)
+ skb_put(skb, sizeof(*cmd));
+
+ opcode = CG2900_BT_VS_RESET_SESSION_CONFIG;
+ cmd->opcode = cpu_to_le16(opcode);
+ cmd->plen = BT_PARAM_LEN(sizeof(*cmd));
+ cmd->id = (u8)stream_handle;
+ } else {
+ struct mc_vs_delete_stream_cmd *cmd;
+
+ dev_dbg(BT_DEV, "BT: HCI_VS_Delete_Stream\n");
+
+ skb = pf_data->alloc_skb(sizeof(*cmd), GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "Could not allocate skb\n");
+ err = -ENOMEM;
+ return err;
+ }
+
+ cmd = (struct mc_vs_delete_stream_cmd *)
+ skb_put(skb, sizeof(*cmd));
+
+ opcode = CG2900_MC_VS_DELETE_STREAM;
+ cmd->opcode = cpu_to_le16(opcode);
+ cmd->plen = BT_PARAM_LEN(sizeof(*cmd));
+ cmd->stream = (u8)stream_handle;
+ }
+
+ /* ...and send it */
+ cb_info->user = audio_user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ audio_user->resp_state = WAITING;
+
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ goto error_handling_free_skb;
+ }
+
+ /* wait for response */
+ if (info->revision == CHIP_REV_PG1) {
+ err = receive_bt_cmd_complete(audio_user, opcode, NULL, 0);
+ } else {
+ u8 vs_err;
+
+ /* All commands in PG2 API returns one byte extra status */
+ err = receive_bt_cmd_complete(audio_user, opcode,
+ &vs_err, sizeof(vs_err));
+
+ if (err)
+ dev_err(BT_DEV,
+ "VS_DELETE_STREAM - failed with error 0x%02X\n",
+ vs_err);
+ else
+ release_stream_id(info, stream_handle);
+ }
+
+ return err;
+
+error_handling_free_skb:
+ kfree_skb(skb);
+ return err;
+}
+
+/**
+ * send_vs_session_ctrl() - Formats an sends a CG2900_BT_VS_SESSION_CTRL command.
+ * @user: Audio user this command belongs to.
+ * @stream_handle: Handle to stream.
+ * @command: Command to execute on stream, should be one of
+ * CG2900_BT_SESSION_START, CG2900_BT_SESSION_STOP,
+ * CG2900_BT_SESSION_PAUSE, CG2900_BT_SESSION_RESUME.
+ *
+ * Packs and sends a command packet and waits for the response. Must
+ * be called with the bt_mutex held.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int send_vs_session_ctrl(struct audio_user *user,
+ u8 stream_handle, u8 command)
+{
+ int err = 0;
+ struct bt_vs_session_ctrl_cmd *pkt;
+ struct sk_buff *skb;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = user->info;
+ pf_data = dev_get_platdata(info->dev_bt);
+ cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(BT_DEV, "BT: HCI_VS_Session_Control handle: %d cmd: %d\n",
+ stream_handle, command);
+
+ skb = pf_data->alloc_skb(sizeof(*pkt), GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV,
+ "send_vs_session_ctrl: Could not allocate skb\n");
+ return -ENOMEM;
+ }
+
+ /* Enter data into the skb */
+ pkt = (struct bt_vs_session_ctrl_cmd *) skb_put(skb, sizeof(*pkt));
+
+ pkt->opcode = cpu_to_le16(CG2900_BT_VS_SESSION_CTRL);
+ pkt->plen = BT_PARAM_LEN(sizeof(*pkt));
+ pkt->id = stream_handle;
+ pkt->control = command; /* Start/stop etc */
+
+ cb_info->user = user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ user->resp_state = WAITING;
+
+ /* Send packet to controller */
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ kfree_skb(skb);
+ goto finished;
+ }
+
+ err = receive_bt_cmd_complete(user, CG2900_BT_VS_SESSION_CTRL,
+ NULL, 0);
+finished:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ user->resp_state = IDLE;
+ return err;
+}
+
+/**
+ * send_vs_session_config() - Formats an sends a CG2900_BT_VS_SESSION_CONFIG command.
+ * @user: Audio user this command belongs to.
+ * @config_stream: Custom function for configuring the stream.
+ * @priv_data: Private data passed to @config_stream untouched.
+ *
+ * Packs and sends a command packet and waits for the response. Must
+ * be called with the bt_mutex held.
+ *
+ * Space is allocated for one stream and a custom function is used to
+ * fill in the stream configuration.
+ *
+ * Returns:
+ * 0-255 stream handle if no error.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int send_vs_session_config(struct audio_user *user,
+ void(*config_stream)(struct audio_info *, void *,
+ struct session_config_stream *),
+ void *priv_data)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ struct bt_vs_session_config_cmd *pkt;
+ u8 session_id;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = user->info;
+ pf_data = dev_get_platdata(info->dev_bt);
+ cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(BT_DEV, "BT: HCI_VS_Set_Session_Configuration\n");
+
+ skb = pf_data->alloc_skb(sizeof(*pkt), GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV,
+ "send_vs_session_config: Could not allocate skb\n");
+ return -ENOMEM;
+ }
+
+ pkt = (struct bt_vs_session_config_cmd *)skb_put(skb, sizeof(*pkt));
+ /* zero the packet so we don't have to set all reserved fields */
+ memset(pkt, 0, sizeof(*pkt));
+
+ /* Common parameters */
+ pkt->opcode = cpu_to_le16(CG2900_BT_VS_SET_SESSION_CONFIG);
+ pkt->plen = BT_PARAM_LEN(sizeof(*pkt));
+ pkt->n_streams = 1; /* 1 stream configuration supplied */
+
+ /* Let the custom-function fill in the rest */
+ config_stream(info, priv_data, &pkt->stream);
+
+ cb_info->user = user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ user->resp_state = WAITING;
+
+ /* Send packet to controller */
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ kfree_skb(skb);
+ goto finished;
+ }
+
+ err = receive_bt_cmd_complete(user,
+ CG2900_BT_VS_SET_SESSION_CONFIG,
+ &session_id, sizeof(session_id));
+ /* Return session id/stream handle if success */
+ if (!err)
+ err = session_id;
+
+finished:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ user->resp_state = IDLE;
+ return err;
+}
+
+/**
+ * send_fm_write_1_param() - Formats and sends an FM legacy write command with one parameter.
+ * @user: Audio user this command belongs to.
+ * @command: Command.
+ * @param: Parameter for command.
+ *
+ * Packs and sends a command packet and waits for the response. Must
+ * be called with the fm_mutex held.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int send_fm_write_1_param(struct audio_user *user,
+ u16 command, u16 param)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ struct fm_leg_cmd *cmd;
+ size_t len;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = user->info;
+ pf_data = dev_get_platdata(info->dev_fm);
+ cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(FM_DEV, "send_fm_write_1_param cmd 0x%X param 0x%X\n",
+ command, param);
+
+ /* base package + one parameter */
+ len = sizeof(*cmd) + sizeof(cmd->fm_cmd.data[0]);
+
+ skb = pf_data->alloc_skb(len, GFP_KERNEL);
+ if (!skb) {
+ dev_err(FM_DEV,
+ "send_fm_write_1_param: Could not allocate skb\n");
+ return -ENOMEM;
+ }
+
+ cmd = (struct fm_leg_cmd *)skb_put(skb, len);
+
+ cmd->length = CG2900_FM_CMD_PARAM_LEN(len);
+ cmd->opcode = CG2900_FM_GEN_ID_LEGACY;
+ cmd->read_write = CG2900_FM_CMD_LEG_PARAM_WRITE;
+ cmd->fm_function = CG2900_FM_CMD_PARAM_WRITECOMMAND;
+ /* one parameter - builtin assumption for this function */
+ cmd->fm_cmd.head = cpu_to_le16(cg2900_make_fm_cmd_id(command, 1));
+ cmd->fm_cmd.data[0] = cpu_to_le16(param);
+
+ cb_info->user = user;
+ dev_dbg(FM_DEV, "New resp_state: WAITING\n");
+ user->resp_state = WAITING;
+
+ /* Send packet to controller */
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(FM_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ kfree_skb(skb);
+ goto finished;
+ }
+
+ err = receive_fm_write_response(user, command);
+finished:
+ dev_dbg(FM_DEV, "New resp_state: IDLE\n");
+ user->resp_state = IDLE;
+ return err;
+}
+
+/**
+ * send_vs_stream_ctrl() - Formats an sends a CG2900_MC_VS_STREAM_CONTROL command.
+ * @user: Audio user this command belongs to.
+ * @stream: Stream id.
+ * @command: Start/stop etc.
+ *
+ * Packs and sends a command packet and waits for the response. Must
+ * be called with the bt_mutex held.
+ *
+ * While the HCI command allows for multiple streams in one command,
+ * this function only handles one.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int send_vs_stream_ctrl(struct audio_user *user, u8 stream, u8 command)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ struct mc_vs_stream_ctrl_cmd *cmd;
+ size_t len;
+ u8 vs_err;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = user->info;
+ pf_data = dev_get_platdata(info->dev_bt);
+ cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(BT_DEV, "send_vs_stream_ctrl stream %d command %d\n", stream,
+ command);
+
+ /* basic length + one stream */
+ len = sizeof(*cmd) + sizeof(cmd->stream[0]);
+
+ skb = pf_data->alloc_skb(len, GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "send_vs_stream_ctrl:Could not allocate skb\n");
+ return -ENOMEM;
+ }
+
+ cmd = (struct mc_vs_stream_ctrl_cmd *)skb_put(skb, len);
+
+ cmd->opcode = cpu_to_le16(CG2900_MC_VS_STREAM_CONTROL);
+ cmd->plen = BT_PARAM_LEN(len);
+ cmd->command = command;
+
+ /* one stream */
+ cmd->n_streams = 1;
+ cmd->stream[0] = stream;
+
+ cb_info->user = user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ user->resp_state = WAITING;
+
+ /* Send packet to controller */
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ kfree_skb(skb);
+ goto finished;
+ }
+
+ /* All commands in PG2 API returns one byte with extra status */
+ err = receive_bt_cmd_complete(user,
+ CG2900_MC_VS_STREAM_CONTROL,
+ &vs_err, sizeof(vs_err));
+ if (err)
+ dev_err(BT_DEV,
+ "VS_STREAM_CONTROL - failed with error 0x%02x\n",
+ vs_err);
+
+finished:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ user->resp_state = IDLE;
+ return err;
+}
+
+/**
+ * send_vs_create_stream() - Formats an sends a CG2900_MC_VS_CREATE_STREAM command.
+ * @user: Audio user this command belongs to.
+ * @inport: Stream id.
+ * @outport: Start/stop etc.
+ * @order: Activation order.
+ *
+ * Packs and sends a command packet and waits for the response. Must
+ * be called with the bt_mutex held.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int send_vs_create_stream(struct audio_user *user, u8 inport,
+ u8 outport, u8 order)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ struct mc_vs_create_stream_cmd *cmd;
+ s8 id;
+ u8 vs_err;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = user->info;
+ pf_data = dev_get_platdata(info->dev_bt);
+ cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(BT_DEV,
+ "send_vs_create_stream inport %d outport %d order %d\n",
+ inport, outport, order);
+
+ id = new_stream_id(info);
+ if (id < 0) {
+ dev_err(BT_DEV, "No free stream id\n");
+ err = -EIO;
+ goto finished;
+ }
+
+ skb = pf_data->alloc_skb(sizeof(*cmd), GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV,
+ "send_vs_create_stream: Could not allocate skb\n");
+ err = -ENOMEM;
+ goto finished_release_id;
+ }
+
+ cmd = (struct mc_vs_create_stream_cmd *)skb_put(skb, sizeof(*cmd));
+
+ cmd->opcode = cpu_to_le16(CG2900_MC_VS_CREATE_STREAM);
+ cmd->plen = BT_PARAM_LEN(sizeof(*cmd));
+ cmd->id = (u8)id;
+ cmd->inport = inport;
+ cmd->outport = outport;
+ cmd->order = order;
+
+ cb_info->user = user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ user->resp_state = WAITING;
+
+ /* Send packet to controller */
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ kfree_skb(skb);
+ goto finished_release_id;
+ }
+
+ /* All commands in PG2 API returns one byte with extra status */
+ err = receive_bt_cmd_complete(user,
+ CG2900_MC_VS_CREATE_STREAM,
+ &vs_err, sizeof(vs_err));
+ if (err) {
+ dev_err(BT_DEV,
+ "VS_CREATE_STREAM - failed with error 0x%02x\n",
+ vs_err);
+ goto finished_release_id;
+ }
+
+ err = id;
+ goto finished;
+
+finished_release_id:
+ release_stream_id(info, id);
+finished:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ user->resp_state = IDLE;
+ return err;
+}
+
+/**
+ * send_vs_port_cfg() - Formats an sends a CG2900_MC_VS_PORT_CONFIG command.
+ * @user: Audio user this command belongs to.
+ * @port: Port id to configure.
+ * @cfg: Pointer to specific configuration.
+ * @cfglen: Length of configuration.
+ *
+ * Packs and sends a command packet and waits for the response. Must
+ * be called with the bt_mutex held.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int send_vs_port_cfg(struct audio_user *user, u8 port,
+ const void *cfg, size_t cfglen)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ struct mc_vs_port_cfg_cmd *cmd;
+ void *ptr;
+ u8 vs_err;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = user->info;
+ pf_data = dev_get_platdata(info->dev_bt);
+ cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(BT_DEV, "send_vs_port_cfg len %d\n", cfglen);
+
+ skb = pf_data->alloc_skb(sizeof(*cmd) + cfglen, GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "send_vs_port_cfg: Could not allocate skb\n");
+ return -ENOMEM;
+ }
+
+ /* Fill in common part */
+ cmd = (struct mc_vs_port_cfg_cmd *) skb_put(skb, sizeof(*cmd));
+ cmd->opcode = cpu_to_le16(CG2900_MC_VS_PORT_CONFIG);
+ cmd->plen = BT_PARAM_LEN(sizeof(*cmd) + cfglen);
+ cmd->type = port;
+
+ /* Copy specific configuration */
+ ptr = skb_put(skb, cfglen);
+ memcpy(ptr, cfg, cfglen);
+
+ /* Send */
+ cb_info->user = user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ user->resp_state = WAITING;
+
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ kfree_skb(skb);
+ goto finished;
+ }
+
+ /* All commands in PG2 API returns one byte with extra status */
+ err = receive_bt_cmd_complete(user, CG2900_MC_VS_PORT_CONFIG,
+ &vs_err, sizeof(vs_err));
+ if (err)
+ dev_err(BT_DEV, "VS_PORT_CONFIG - failed with error 0x%02x\n",
+ vs_err);
+
+finished:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ user->resp_state = IDLE;
+ return err;
+}
+
+/**
+ * set_dai_config_pg1() - Internal implementation of @cg2900_audio_set_dai_config for PG1 hardware.
+ * @audio_user: Pointer to audio user struct.
+ * @config: Pointer to the configuration to set.
+ *
+ * Sets the Digital Audio Interface (DAI) configuration for PG1
+ * hardware. This is and internal function and basic
+ * argument-verification should have been done by the caller.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EACCESS if port is not supported.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int set_dai_config_pg1(struct audio_user *audio_user,
+ struct cg2900_dai_config *config)
+{
+ int err = 0;
+ struct cg2900_dai_conf_i2s_pcm *i2s_pcm;
+ struct sk_buff *skb = NULL;
+ struct bt_vs_set_hw_cfg_cmd_i2s *i2s_cmd;
+ struct bt_vs_set_hw_cfg_cmd_pcm *pcm_cmd;
+ struct audio_info *info = audio_user->info;
+ struct cg2900_user_data *pf_data = dev_get_platdata(info->dev_bt);
+ struct audio_cb_info *cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(BT_DEV, "set_dai_config_pg1 port %d\n", config->port);
+
+ /*
+ * Use mutex to assure that only ONE command is sent at any time on
+ * each channel.
+ */
+ mutex_lock(&info->bt_mutex);
+
+ /* Allocate the sk_buffer. The length is actually a max length since
+ * length varies depending on logical transport.
+ */
+ skb = pf_data->alloc_skb(CG2900_BT_LEN_VS_SET_HARDWARE_CONFIG,
+ GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "set_dai_config_pg1: Could not allocate skb\n");
+ err = -ENOMEM;
+ goto finished_unlock_mutex;
+ }
+
+ /* Fill in hci-command according to received configuration */
+ switch (config->port) {
+ case PORT_0_I2S:
+ i2s_cmd = (struct bt_vs_set_hw_cfg_cmd_i2s *)
+ skb_put(skb, sizeof(*i2s_cmd));
+
+ i2s_cmd->opcode = cpu_to_le16(CG2900_BT_VS_SET_HARDWARE_CONFIG);
+ i2s_cmd->plen = BT_PARAM_LEN(sizeof(*i2s_cmd));
+
+ i2s_cmd->vp_type = PORT_PROTOCOL_I2S;
+ i2s_cmd->port_id = 0x00; /* First/only I2S port */
+ i2s_cmd->half_period = config->conf.i2s.half_period;
+
+ i2s_cmd->master_slave = mc_i2s_role(config->conf.i2s.mode);
+
+ /* Store the new configuration */
+ mutex_lock(&info->management_mutex);
+ memcpy(&info->i2s_config, &config->conf.i2s,
+ sizeof(config->conf.i2s));
+ info->i2s_config_known = true;
+ mutex_unlock(&info->management_mutex);
+ break;
+
+ case PORT_1_I2S_PCM:
+ pcm_cmd = (struct bt_vs_set_hw_cfg_cmd_pcm *)
+ skb_put(skb, sizeof(*pcm_cmd));
+
+ pcm_cmd->opcode = cpu_to_le16(CG2900_BT_VS_SET_HARDWARE_CONFIG);
+ pcm_cmd->plen = BT_PARAM_LEN(sizeof(*pcm_cmd));
+
+ i2s_pcm = &config->conf.i2s_pcm;
+
+ /*
+ * PG1 chips don't support I2S over the PCM/I2S bus,
+ * and PG2 chips don't use this command
+ */
+ if (i2s_pcm->protocol != PORT_PROTOCOL_PCM) {
+ dev_err(BT_DEV,
+ "I2S not supported over the PCM/I2S bus\n");
+ err = -EACCES;
+ goto error_handling_free_skb;
+ }
+
+ pcm_cmd->vp_type = PORT_PROTOCOL_PCM;
+ pcm_cmd->port_id = 0x00; /* First/only PCM port */
+
+ HWCONFIG_PCM_SET_MODE(pcm_cmd, mc_pcm_role(i2s_pcm->mode));
+
+ HWCONFIG_PCM_SET_DIR(pcm_cmd, 0, i2s_pcm->slot_0_dir);
+ HWCONFIG_PCM_SET_DIR(pcm_cmd, 1, i2s_pcm->slot_1_dir);
+ HWCONFIG_PCM_SET_DIR(pcm_cmd, 2, i2s_pcm->slot_2_dir);
+ HWCONFIG_PCM_SET_DIR(pcm_cmd, 3, i2s_pcm->slot_3_dir);
+
+ pcm_cmd->bit_clock = i2s_pcm->clk;
+ pcm_cmd->frame_len =
+ cpu_to_le16(get_fs_duration(i2s_pcm->duration));
+
+ /* Store the new configuration */
+ mutex_lock(&info->management_mutex);
+ memcpy(&info->i2s_pcm_config, &config->conf.i2s_pcm,
+ sizeof(config->conf.i2s_pcm));
+ info->i2s_pcm_config_known = true;
+ mutex_unlock(&info->management_mutex);
+ break;
+
+ default:
+ dev_err(BT_DEV, "Unknown port configuration %d\n",
+ config->port);
+ err = -EACCES;
+ goto error_handling_free_skb;
+ };
+
+ cb_info->user = audio_user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ audio_user->resp_state = WAITING;
+
+ /* Send packet to controller */
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ goto error_handling_free_skb;
+ }
+
+ err = receive_bt_cmd_complete(audio_user,
+ CG2900_BT_VS_SET_HARDWARE_CONFIG,
+ NULL, 0);
+
+ goto finished_unlock_mutex;
+
+error_handling_free_skb:
+ kfree_skb(skb);
+finished_unlock_mutex:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ audio_user->resp_state = IDLE;
+ mutex_unlock(&info->bt_mutex);
+ return err;
+}
+
+/**
+ * set_dai_config_pg2() - Internal implementation of @cg2900_audio_set_dai_config for PG2 hardware.
+ * @audio_user: Pointer to audio user struct.
+ * @config: Pointer to the configuration to set.
+ *
+ * Sets the Digital Audio Interface (DAI) configuration for PG2
+ * hardware. This is an internal function and basic
+ * argument-verification should have been done by the caller.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EACCESS if port is not supported.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int set_dai_config_pg2(struct audio_user *audio_user,
+ struct cg2900_dai_config *config)
+{
+ int err = 0;
+ struct cg2900_dai_conf_i2s *i2s;
+ struct cg2900_dai_conf_i2s_pcm *i2s_pcm;
+
+ struct mc_vs_port_cfg_i2s i2s_cfg;
+ struct mc_vs_port_cfg_pcm_i2s pcm_cfg;
+ struct audio_info *info = audio_user->info;
+
+ dev_dbg(BT_DEV, "set_dai_config_pg2 port %d\n", config->port);
+
+ /*
+ * Use mutex to assure that only ONE command is sent at any time on
+ * each channel.
+ */
+ mutex_lock(&info->bt_mutex);
+
+ switch (config->port) {
+ case PORT_0_I2S:
+ i2s = &config->conf.i2s;
+
+ memset(&i2s_cfg, 0, sizeof(i2s_cfg)); /* just to be safe */
+
+ /* master/slave */
+ PORTCFG_I2S_SET_ROLE(i2s_cfg, mc_i2s_role(i2s->mode));
+
+ PORTCFG_I2S_SET_HALFPERIOD(i2s_cfg, i2s->half_period);
+ PORTCFG_I2S_SET_CHANNELS(i2s_cfg,
+ mc_i2s_channel_select(i2s->channel_sel));
+ PORTCFG_I2S_SET_SRATE(i2s_cfg,
+ mc_i2s_sample_rate(i2s->sample_rate));
+ switch (i2s->word_width) {
+ case WORD_WIDTH_16:
+ PORTCFG_I2S_SET_WORDLEN(i2s_cfg, CG2900_MC_I2S_WORD_16);
+ break;
+ case WORD_WIDTH_32:
+ PORTCFG_I2S_SET_WORDLEN(i2s_cfg, CG2900_MC_I2S_WORD_32);
+ break;
+ }
+
+ /* Store the new configuration */
+ mutex_lock(&info->management_mutex);
+ memcpy(&(info->i2s_config), &(config->conf.i2s),
+ sizeof(config->conf.i2s));
+ info->i2s_config_known = true;
+ mutex_unlock(&info->management_mutex);
+
+ /* Send */
+ err = send_vs_port_cfg(audio_user, CG2900_MC_PORT_I2S,
+ &i2s_cfg, sizeof(i2s_cfg));
+ break;
+
+ case PORT_1_I2S_PCM:
+ i2s_pcm = &config->conf.i2s_pcm;
+
+ memset(&pcm_cfg, 0, sizeof(pcm_cfg)); /* just to be safe */
+
+ /* master/slave */
+ PORTCFG_PCM_SET_ROLE(pcm_cfg, mc_pcm_role(i2s_pcm->mode));
+
+ /* set direction for all 4 slots */
+ PORTCFG_PCM_SET_DIR(pcm_cfg, 0, i2s_pcm->slot_0_dir);
+ PORTCFG_PCM_SET_DIR(pcm_cfg, 1, i2s_pcm->slot_1_dir);
+ PORTCFG_PCM_SET_DIR(pcm_cfg, 2, i2s_pcm->slot_2_dir);
+ PORTCFG_PCM_SET_DIR(pcm_cfg, 3, i2s_pcm->slot_3_dir);
+
+ /* set used SCO slots, other use cases not supported atm */
+ PORTCFG_PCM_SET_SCO_USED(pcm_cfg, 0, i2s_pcm->slot_0_used);
+ PORTCFG_PCM_SET_SCO_USED(pcm_cfg, 1, i2s_pcm->slot_1_used);
+ PORTCFG_PCM_SET_SCO_USED(pcm_cfg, 2, i2s_pcm->slot_2_used);
+ PORTCFG_PCM_SET_SCO_USED(pcm_cfg, 3, i2s_pcm->slot_3_used);
+
+ /* slot starts */
+ pcm_cfg.slot_start[0] = i2s_pcm->slot_0_start;
+ pcm_cfg.slot_start[1] = i2s_pcm->slot_1_start;
+ pcm_cfg.slot_start[2] = i2s_pcm->slot_2_start;
+ pcm_cfg.slot_start[3] = i2s_pcm->slot_3_start;
+
+ /* audio/voice sample-rate ratio */
+ PORTCFG_PCM_SET_RATIO(pcm_cfg, i2s_pcm->ratio);
+
+ /* PCM or I2S mode */
+ PORTCFG_PCM_SET_MODE(pcm_cfg, i2s_pcm->protocol);
+
+ pcm_cfg.frame_len = i2s_pcm->duration;
+
+ PORTCFG_PCM_SET_BITCLK(pcm_cfg, i2s_pcm->clk);
+ PORTCFG_PCM_SET_SRATE(pcm_cfg,
+ mc_pcm_sample_rate(i2s_pcm->sample_rate));
+
+ /* Store the new configuration */
+ mutex_lock(&info->management_mutex);
+ memcpy(&(info->i2s_pcm_config), &(config->conf.i2s_pcm),
+ sizeof(config->conf.i2s_pcm));
+ info->i2s_pcm_config_known = true;
+ mutex_unlock(&info->management_mutex);
+
+ /* Send */
+ err = send_vs_port_cfg(audio_user, CG2900_MC_PORT_PCM_I2S,
+ &pcm_cfg, sizeof(pcm_cfg));
+ break;
+
+ default:
+ dev_err(BT_DEV, "Unknown port configuration %d\n",
+ config->port);
+ err = -EACCES;
+ };
+
+ mutex_unlock(&info->bt_mutex);
+ return err;
+}
+
+/**
+ * struct i2s_fm_stream_config_priv - Helper struct for stream i2s-fm streams.
+ * @fm_config: FM endpoint configuration.
+ * @rx: true for FM-RX, false for FM-TX.
+ */
+struct i2s_fm_stream_config_priv {
+ struct cg2900_endpoint_config_fm *fm_config;
+ bool rx;
+
+};
+
+/**
+ * config_i2s_fm_stream() - Callback for @send_vs_session_config.
+ * @info: Audio info structure.
+ * @_priv: Pointer to a @i2s_fm_stream_config_priv struct.
+ * @cfg: Pointer to stream config block in command packet.
+ *
+ * Fills in stream configuration for I2S-FM RX/TX.
+ */
+
+static void config_i2s_fm_stream(struct audio_info *info, void *_priv,
+ struct session_config_stream *cfg)
+{
+ struct i2s_fm_stream_config_priv *priv = _priv;
+ struct session_config_vport *fm;
+ struct session_config_vport *i2s;
+
+ cfg->media_type = CG2900_BT_SESSION_MEDIA_TYPE_AUDIO;
+
+ if (info->i2s_config.channel_sel == CHANNEL_SELECTION_BOTH)
+ SESSIONCFG_SET_CHANNELS(cfg, CG2900_BT_MEDIA_CONFIG_STEREO);
+ else
+ SESSIONCFG_SET_CHANNELS(cfg, CG2900_BT_MEDIA_CONFIG_MONO);
+
+ SESSIONCFG_I2S_SET_SRATE(cfg,
+ session_config_sample_rate(priv->fm_config->sample_rate));
+
+ cfg->codec_type = CG2900_CODEC_TYPE_NONE;
+ /* codec mode and parameters not used */
+
+ if (priv->rx) {
+ fm = &cfg->inport; /* FM is input */
+ i2s = &cfg->outport; /* I2S is output */
+ } else {
+ i2s = &cfg->inport; /* I2S is input */
+ fm = &cfg->outport; /* FM is output */
+ }
+
+ fm->type = CG2900_BT_VP_TYPE_FM;
+
+ i2s->type = CG2900_BT_VP_TYPE_I2S;
+ i2s->i2s.index = CG2900_BT_SESSION_I2S_INDEX_I2S;
+ i2s->i2s.channel = info->i2s_config.channel_sel;
+}
+
+/**
+ * conn_start_i2s_to_fm_rx() - Start an audio stream connecting FM RX to I2S.
+ * @audio_user: Audio user to check for.
+ * @stream_handle: [out] Pointer where to store the stream handle.
+ *
+ * This function sets up an FM RX to I2S stream.
+ * It does this by first setting the output mode and then the configuration of
+ * the External Sample Rate Converter.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -ENOMEM upon allocation errors.
+ * -EIO for other errors.
+ */
+static int conn_start_i2s_to_fm_rx(struct audio_user *audio_user,
+ unsigned int *stream_handle)
+{
+ int err = 0;
+ union cg2900_endpoint_config_union *fm_config;
+ struct audio_info *info = audio_user->info;
+
+ dev_dbg(FM_DEV, "conn_start_i2s_to_fm_rx\n");
+
+ fm_config = find_endpoint(ENDPOINT_FM_RX, &info->endpoints);
+ if (!fm_config) {
+ dev_err(FM_DEV, "FM RX not configured before stream start\n");
+ return -EIO;
+ }
+
+ if (!(info->i2s_config_known)) {
+ dev_err(FM_DEV,
+ "I2S DAI not configured before stream start\n");
+ return -EIO;
+ }
+
+ /*
+ * Use mutex to assure that only ONE command is sent at any
+ * time on each channel.
+ */
+ mutex_lock(&info->fm_mutex);
+ mutex_lock(&info->bt_mutex);
+
+ /*
+ * Now set the output mode of the External Sample Rate Converter by
+ * sending HCI_Write command with AUP_EXT_SetMode.
+ */
+ err = send_fm_write_1_param(audio_user,
+ CG2900_FM_CMD_ID_AUP_EXT_SET_MODE,
+ CG2900_FM_CMD_AUP_EXT_SET_MODE_PARALLEL);
+ if (err)
+ goto finished_unlock_mutex;
+
+ /*
+ * Now configure the External Sample Rate Converter by sending
+ * HCI_Write command with AUP_EXT_SetControl.
+ */
+ err = send_fm_write_1_param(
+ audio_user, CG2900_FM_CMD_ID_AUP_EXT_SET_CTRL,
+ fm_get_conversion(fm_config->fm.sample_rate));
+ if (err)
+ goto finished_unlock_mutex;
+
+ /* Set up the stream */
+ if (info->revision == CHIP_REV_PG1) {
+ struct i2s_fm_stream_config_priv stream_priv;
+
+ /* Now send HCI_VS_Set_Session_Configuration command */
+ stream_priv.fm_config = &fm_config->fm;
+ stream_priv.rx = true;
+ err = send_vs_session_config(audio_user, config_i2s_fm_stream,
+ &stream_priv);
+ } else {
+ struct mc_vs_port_cfg_fm fm_cfg;
+
+ memset(&fm_cfg, 0, sizeof(fm_cfg));
+
+ /* Configure port FM RX */
+ /* Expects 0-3 - same as user API - so no conversion needed */
+ PORTCFG_FM_SET_SRATE(fm_cfg, (u8)fm_config->fm.sample_rate);
+
+ err = send_vs_port_cfg(audio_user, CG2900_MC_PORT_FM_RX_1,
+ &fm_cfg, sizeof(fm_cfg));
+ if (err)
+ goto finished_unlock_mutex;
+
+ /* CreateStream */
+ err = send_vs_create_stream(audio_user,
+ CG2900_MC_PORT_FM_RX_1,
+ CG2900_MC_PORT_I2S,
+ 0); /* chip doesn't care */
+ }
+
+ if (err < 0)
+ goto finished_unlock_mutex;
+
+ /* Store the stream handle (used for start and stop stream) */
+ *stream_handle = (u8)err;
+ dev_dbg(FM_DEV, "stream_handle set to %d\n", *stream_handle);
+
+ /* Now start the stream */
+ if (info->revision == CHIP_REV_PG1)
+ err = send_vs_session_ctrl(audio_user, *stream_handle,
+ CG2900_BT_SESSION_START);
+ else
+ err = send_vs_stream_ctrl(audio_user, *stream_handle,
+ CG2900_MC_STREAM_START);
+ /*Let's delete a stream.*/
+ if (err < 0) {
+ dev_dbg(BT_DEV, "Could not start a stream.");
+ (void)send_vs_delete_stream(audio_user, *stream_handle);
+ }
+
+finished_unlock_mutex:
+ dev_dbg(FM_DEV, "New resp_state: IDLE\n");
+ audio_user->resp_state = IDLE;
+ mutex_unlock(&info->bt_mutex);
+ mutex_unlock(&info->fm_mutex);
+ return err;
+}
+
+/**
+ * conn_start_i2s_to_fm_tx() - Start an audio stream connecting FM TX to I2S.
+ * @audio_user: Audio user to check for.
+ * @stream_handle: [out] Pointer where to store the stream handle.
+ *
+ * This function sets up an I2S to FM TX stream.
+ * It does this by first setting the Audio Input source and then setting the
+ * configuration and input source of BT sample rate converter.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -ENOMEM upon allocation errors.
+ * -EIO for other errors.
+ */
+static int conn_start_i2s_to_fm_tx(struct audio_user *audio_user,
+ unsigned int *stream_handle)
+{
+ int err = 0;
+ union cg2900_endpoint_config_union *fm_config;
+ struct audio_info *info = audio_user->info;
+
+ dev_dbg(FM_DEV, "conn_start_i2s_to_fm_tx\n");
+
+ fm_config = find_endpoint(ENDPOINT_FM_TX, &info->endpoints);
+ if (!fm_config) {
+ dev_err(FM_DEV, "FM TX not configured before stream start\n");
+ return -EIO;
+ }
+
+ if (!(info->i2s_config_known)) {
+ dev_err(FM_DEV,
+ "I2S DAI not configured before stream start\n");
+ return -EIO;
+ }
+
+ /*
+ * Use mutex to assure that only ONE command is sent at any time
+ * on each channel.
+ */
+ mutex_lock(&info->fm_mutex);
+ mutex_lock(&info->bt_mutex);
+
+ /*
+ * Select Audio Input Source by sending HCI_Write command with
+ * AIP_SetMode.
+ */
+ dev_dbg(FM_DEV, "FM: AIP_SetMode\n");
+ err = send_fm_write_1_param(audio_user, CG2900_FM_CMD_ID_AIP_SET_MODE,
+ CG2900_FM_CMD_AIP_SET_MODE_INPUT_DIG);
+ if (err)
+ goto finished_unlock_mutex;
+
+ /*
+ * Now configure the BT sample rate converter by sending HCI_Write
+ * command with AIP_BT_SetControl.
+ */
+ dev_dbg(FM_DEV, "FM: AIP_BT_SetControl\n");
+ err = send_fm_write_1_param(
+ audio_user, CG2900_FM_CMD_ID_AIP_BT_SET_CTRL,
+ fm_get_conversion(fm_config->fm.sample_rate));
+ if (err)
+ goto finished_unlock_mutex;
+
+ /*
+ * Now set input of the BT sample rate converter by sending HCI_Write
+ * command with AIP_BT_SetMode.
+ */
+ dev_dbg(FM_DEV, "FM: AIP_BT_SetMode\n");
+ err = send_fm_write_1_param(audio_user,
+ CG2900_FM_CMD_ID_AIP_BT_SET_MODE,
+ CG2900_FM_CMD_AIP_BT_SET_MODE_INPUT_PAR);
+ if (err)
+ goto finished_unlock_mutex;
+
+ /* Set up the stream */
+ if (info->revision == CHIP_REV_PG1) {
+ struct i2s_fm_stream_config_priv stream_priv;
+
+ /* Now send HCI_VS_Set_Session_Configuration command */
+ stream_priv.fm_config = &fm_config->fm;
+ stream_priv.rx = false;
+ err = send_vs_session_config(audio_user, config_i2s_fm_stream,
+ &stream_priv);
+ } else {
+ struct mc_vs_port_cfg_fm fm_cfg;
+
+ memset(&fm_cfg, 0, sizeof(fm_cfg));
+
+ /* Configure port FM TX */
+ /* Expects 0-3 - same as user API - so no conversion needed */
+ PORTCFG_FM_SET_SRATE(fm_cfg, (u8)fm_config->fm.sample_rate);
+
+ err = send_vs_port_cfg(audio_user, CG2900_MC_PORT_FM_TX,
+ &fm_cfg, sizeof(fm_cfg));
+ if (err)
+ goto finished_unlock_mutex;
+
+ /* CreateStream */
+ err = send_vs_create_stream(audio_user,
+ CG2900_MC_PORT_I2S,
+ CG2900_MC_PORT_FM_TX,
+ 0); /* chip doesn't care */
+ }
+
+ if (err < 0)
+ goto finished_unlock_mutex;
+
+ /* Store the stream handle (used for start and stop stream) */
+ *stream_handle = (u8)err;
+ dev_dbg(FM_DEV, "stream_handle set to %d\n", *stream_handle);
+
+ /* Now start the stream */
+ if (info->revision == CHIP_REV_PG1)
+ err = send_vs_session_ctrl(audio_user, *stream_handle,
+ CG2900_BT_SESSION_START);
+ else
+ err = send_vs_stream_ctrl(audio_user, *stream_handle,
+ CG2900_MC_STREAM_START);
+ /* Let's delete and release stream.*/
+ if (err < 0) {
+ dev_dbg(BT_DEV, "Could not start a stream.");
+ (void)send_vs_delete_stream(audio_user, *stream_handle);
+ }
+
+finished_unlock_mutex:
+ dev_dbg(FM_DEV, "New resp_state: IDLE\n");
+ audio_user->resp_state = IDLE;
+ mutex_unlock(&info->bt_mutex);
+ mutex_unlock(&info->fm_mutex);
+ return err;
+}
+
+/**
+ * config_pcm_sco_stream() - Callback for @send_vs_session_config.
+ * @info: Audio info structure.
+ * @_priv: Pointer to a @cg2900_endpoint_config_sco_in_out struct.
+ * @cfg: Pointer to stream config block in command packet.
+ *
+ * Fills in stream configuration for PCM-SCO.
+ */
+static void config_pcm_sco_stream(struct audio_info *info, void *_priv,
+ struct session_config_stream *cfg)
+{
+ struct cg2900_endpoint_config_sco_in_out *sco_ep = _priv;
+
+ cfg->media_type = CG2900_BT_SESSION_MEDIA_TYPE_AUDIO;
+
+ SESSIONCFG_SET_CHANNELS(cfg, CG2900_BT_MEDIA_CONFIG_MONO);
+ SESSIONCFG_I2S_SET_SRATE(cfg,
+ session_config_sample_rate(sco_ep->sample_rate));
+
+ cfg->codec_type = CG2900_CODEC_TYPE_NONE;
+ /* codec mode and parameters not used */
+
+ cfg->inport.type = CG2900_BT_VP_TYPE_BT_SCO;
+ cfg->inport.sco.acl_handle = cpu_to_le16(DEFAULT_SCO_HANDLE);
+
+ cfg->outport.type = CG2900_BT_VP_TYPE_PCM;
+ cfg->outport.pcm.index = CG2900_BT_SESSION_PCM_INDEX_PCM_I2S;
+
+ SESSIONCFG_PCM_SET_USED(cfg->outport, 0,
+ info->i2s_pcm_config.slot_0_used);
+ SESSIONCFG_PCM_SET_USED(cfg->outport, 1,
+ info->i2s_pcm_config.slot_1_used);
+ SESSIONCFG_PCM_SET_USED(cfg->outport, 2,
+ info->i2s_pcm_config.slot_2_used);
+ SESSIONCFG_PCM_SET_USED(cfg->outport, 3,
+ info->i2s_pcm_config.slot_3_used);
+
+ cfg->outport.pcm.slot_start[0] =
+ info->i2s_pcm_config.slot_0_start;
+ cfg->outport.pcm.slot_start[1] =
+ info->i2s_pcm_config.slot_1_start;
+ cfg->outport.pcm.slot_start[2] =
+ info->i2s_pcm_config.slot_2_start;
+ cfg->outport.pcm.slot_start[3] =
+ info->i2s_pcm_config.slot_3_start;
+}
+
+/**
+ * conn_start_pcm_to_sco() - Start an audio stream connecting Bluetooth (e)SCO to PCM_I2S.
+ * @audio_user: Audio user to check for.
+ * @stream_handle: [out] Pointer where to store the stream handle.
+ *
+ * This function sets up a BT to_from PCM_I2S stream. It does this by
+ * first setting the Session configuration and then starting the Audio
+ * Stream.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -ENOMEM upon allocation errors.
+ * Errors from @cg2900_write
+ * -EIO for other errors.
+ */
+static int conn_start_pcm_to_sco(struct audio_user *audio_user,
+ unsigned int *stream_handle)
+{
+ int err = 0;
+ union cg2900_endpoint_config_union *bt_config;
+ struct audio_info *info = audio_user->info;
+
+ dev_dbg(BT_DEV, "conn_start_pcm_to_sco\n");
+
+ bt_config = find_endpoint(ENDPOINT_BT_SCO_INOUT, &info->endpoints);
+ if (!bt_config) {
+ dev_err(BT_DEV, "BT not configured before stream start\n");
+ return -EIO;
+ }
+
+ if (!(info->i2s_pcm_config_known)) {
+ dev_err(BT_DEV,
+ "I2S_PCM DAI not configured before stream start\n");
+ return -EIO;
+ }
+
+ /*
+ * Use mutex to assure that only ONE command is sent at any time on each
+ * channel.
+ */
+ mutex_lock(&info->bt_mutex);
+
+ /* Set up the stream */
+ if (info->revision == CHIP_REV_PG1) {
+ err = send_vs_session_config(audio_user, config_pcm_sco_stream,
+ &bt_config->sco);
+ } else {
+ struct mc_vs_port_cfg_sco sco_cfg;
+
+ /* zero codec params etc */
+ memset(&sco_cfg, 0, sizeof(sco_cfg));
+ sco_cfg.acl_id = DEFAULT_SCO_HANDLE;
+ PORTCFG_SCO_SET_WBS(sco_cfg, 0); /* No WBS yet */
+ PORTCFG_SCO_SET_CODEC(sco_cfg, CG2900_CODEC_TYPE_NONE);
+
+ err = send_vs_port_cfg(audio_user, CG2900_MC_PORT_BT_SCO,
+ &sco_cfg, sizeof(sco_cfg));
+ if (err)
+ goto finished_unlock_mutex;
+
+ /* CreateStream */
+ err = send_vs_create_stream(audio_user,
+ CG2900_MC_PORT_PCM_I2S,
+ CG2900_MC_PORT_BT_SCO,
+ 0); /* chip doesn't care */
+ }
+
+ if (err < 0)
+ goto finished_unlock_mutex;
+
+ /* Store the stream handle (used for start and stop stream) */
+ *stream_handle = (u8)err;
+ dev_dbg(BT_DEV, "stream_handle set to %d\n", *stream_handle);
+
+ /* Now start the stream */
+ if (info->revision == CHIP_REV_PG1)
+ err = send_vs_session_ctrl(audio_user, *stream_handle,
+ CG2900_BT_SESSION_START);
+ else
+ err = send_vs_stream_ctrl(audio_user, *stream_handle,
+ CG2900_MC_STREAM_START);
+ /* Let's delete and release stream.*/
+ if (err < 0) {
+ dev_dbg(BT_DEV, "Could not start a stream.");
+ (void)send_vs_delete_stream(audio_user, *stream_handle);
+ }
+
+finished_unlock_mutex:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ audio_user->resp_state = IDLE;
+ mutex_unlock(&info->bt_mutex);
+ return err;
+}
+
+/**
+ * conn_stop_stream() - Stops an audio stream defined by @stream_handle.
+ * @audio_user: Audio user to check for.
+ * @stream_handle: Handle of the audio stream.
+ *
+ * This function is used to stop an audio stream defined by a stream
+ * handle. It does this by first stopping the stream and then
+ * resetting the session/stream.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -ENOMEM upon allocation errors.
+ * Errors from @cg2900_write.
+ * -EIO for other errors.
+ */
+static int conn_stop_stream(struct audio_user *audio_user,
+ unsigned int stream_handle)
+{
+ int err = 0;
+ struct audio_info *info = audio_user->info;
+
+ dev_dbg(BT_DEV, "conn_stop_stream handle %d\n", stream_handle);
+
+ /*
+ * Use mutex to assure that only ONE command is sent at any
+ * time on each channel.
+ */
+ mutex_lock(&info->bt_mutex);
+
+ /* Now stop the stream */
+ if (info->revision == CHIP_REV_PG1)
+ err = send_vs_session_ctrl(audio_user, stream_handle,
+ CG2900_BT_SESSION_STOP);
+ else
+ err = send_vs_stream_ctrl(audio_user, stream_handle,
+ CG2900_MC_STREAM_STOP);
+ if (err)
+ goto finished_unlock_mutex;
+
+ err = send_vs_delete_stream(audio_user, stream_handle);
+
+finished_unlock_mutex:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ audio_user->resp_state = IDLE;
+ mutex_unlock(&info->bt_mutex);
+ return err;
+}
+
+/**
+ * cg2900_audio_get_devices() - Returns connected CG2900 Audio devices.
+ * @devices: Array of CG2900 Audio devices.
+ * @size: Max number of devices in array.
+ *
+ * Returns:
+ * 0 if no devices exist.
+ * > 0 is the number of devices inserted in the list.
+ * -EINVAL upon bad input parameter.
+ */
+int cg2900_audio_get_devices(struct device *devices[], __u8 size)
+{
+ struct list_head *cursor;
+ struct audio_info *tmp;
+ int i = 0;
+
+ if (!size) {
+ pr_err("No space to insert devices into list\n");
+ return 0;
+ }
+
+ if (!devices) {
+ pr_err("NULL submitted as devices array\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Go through and store the devices. If NULL is supplied for dev
+ * just return first device found.
+ */
+ list_for_each(cursor, &cg2900_audio_devices) {
+ tmp = list_entry(cursor, struct audio_info, list);
+ devices[i] = tmp->parent;
+ i++;
+ if (i == size)
+ break;
+ }
+ return i;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_get_devices);
+
+/**
+ * cg2900_audio_open() - Opens a session to the ST-Ericsson CG2900 Audio control interface.
+ * @session: [out] Address where to store the session identifier.
+ * Allocated by caller, must not be NULL.
+ * @parent: Parent device representing the CG2900 controller connected.
+ * If NULL is supplied the first available device is used.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EACCES if no info structure can be found.
+ * -EINVAL upon bad input parameter.
+ * -ENOMEM upon allocation failure.
+ * -EMFILE if no more user session could be opened.
+ * -EIO upon failure to register to CG2900.
+ * Error codes from get_info.
+ */
+int cg2900_audio_open(unsigned int *session, struct device *parent)
+{
+ int err = 0;
+ int i;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data_bt;
+ struct cg2900_user_data *pf_data_fm;
+
+ pr_debug("cg2900_audio_open");
+
+ info = get_info(parent);
+ if (!info) {
+ pr_err("No audio info exist");
+ return -EACCES;
+ } else if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ if (!session) {
+ pr_err("NULL supplied as session");
+ return -EINVAL;
+ }
+
+ mutex_lock(&info->management_mutex);
+
+ *session = 0;
+
+ /*
+ * First find a free session to use and allocate the session structure.
+ */
+ for (i = FIRST_USER;
+ i < MAX_NBR_OF_USERS && cg2900_audio_sessions[i];
+ i++)
+ ; /* Just loop until found or end reached */
+
+ if (i >= MAX_NBR_OF_USERS) {
+ pr_err("Couldn't find free user");
+ err = -EMFILE;
+ goto finished;
+ }
+
+ cg2900_audio_sessions[i] =
+ kzalloc(sizeof(*(cg2900_audio_sessions[0])), GFP_KERNEL);
+ if (!cg2900_audio_sessions[i]) {
+ pr_err("Could not allocate user");
+ err = -ENOMEM;
+ goto finished;
+ }
+ pr_debug("Found free session %d", i);
+ *session = i;
+ info->nbr_of_users_active++;
+
+ cg2900_audio_sessions[*session]->resp_state = IDLE;
+ cg2900_audio_sessions[*session]->session = *session;
+ cg2900_audio_sessions[*session]->info = info;
+
+ pf_data_bt = dev_get_platdata(info->dev_bt);
+ pf_data_fm = dev_get_platdata(info->dev_fm);
+
+ if (info->nbr_of_users_active == 1) {
+ struct cg2900_rev_data rev_data;
+
+ /*
+ * First user so register to CG2900 Core.
+ * First the BT audio device.
+ */
+ err = pf_data_bt->open(pf_data_bt);
+ if (err) {
+ dev_err(BT_DEV, "Failed to open BT audio channel\n");
+ goto error_handling;
+ }
+
+ /* Then the FM audio device */
+ err = pf_data_fm->open(pf_data_fm);
+ if (err) {
+ dev_err(FM_DEV, "Failed to open FM audio channel\n");
+ goto error_handling;
+ }
+
+ /* Read chip revision data */
+ if (!pf_data_bt->get_local_revision(pf_data_bt, &rev_data)) {
+ pr_err("Couldn't retrieve revision data");
+ err = -EIO;
+ goto error_handling;
+ }
+
+ /* Decode revision data */
+ switch (rev_data.revision) {
+ case CG2900_PG1_REV:
+ case CG2900_PG1_SPECIAL_REV:
+ info->revision = CHIP_REV_PG1;
+ break;
+
+ case CG2900_PG2_REV:
+ info->revision = CHIP_REV_PG2;
+ break;
+
+ default:
+ pr_err("Chip rev 0x%04X sub 0x%04X not supported",
+ rev_data.revision, rev_data.sub_version);
+ err = -EIO;
+ goto error_handling;
+ }
+
+ info->state = OPENED;
+ }
+
+ pr_info("Session %d opened", *session);
+
+ goto finished;
+
+error_handling:
+ if (pf_data_fm->opened)
+ pf_data_fm->close(pf_data_fm);
+ if (pf_data_bt->opened)
+ pf_data_bt->close(pf_data_bt);
+ info->nbr_of_users_active--;
+ kfree(cg2900_audio_sessions[*session]);
+ cg2900_audio_sessions[*session] = NULL;
+finished:
+ mutex_unlock(&info->management_mutex);
+ return err;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_open);
+
+/**
+ * cg2900_audio_close() - Closes an opened session to the ST-Ericsson CG2900 audio control interface.
+ * @session: [in_out] Pointer to session identifier to close.
+ * Will be 0 after this call.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL upon bad input parameter.
+ * -EIO if driver has not been opened.
+ * -EACCES if session has not opened.
+ */
+int cg2900_audio_close(unsigned int *session)
+{
+ int err = 0;
+ struct audio_user *audio_user;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data_bt;
+ struct cg2900_user_data *pf_data_fm;
+
+ pr_debug("cg2900_audio_close");
+
+ if (!session) {
+ pr_err("NULL pointer supplied");
+ return -EINVAL;
+ }
+
+ audio_user = get_session_user(*session);
+ if (!audio_user) {
+ pr_err("Invalid session ID");
+ return -EINVAL;
+ }
+
+ info = audio_user->info;
+
+ if (info->state != OPENED) {
+ dev_err(BT_DEV, "Audio driver not open\n");
+ return -EIO;
+ }
+
+ mutex_lock(&info->management_mutex);
+
+ pf_data_bt = dev_get_platdata(info->dev_bt);
+ pf_data_fm = dev_get_platdata(info->dev_fm);
+
+ if (!cg2900_audio_sessions[*session]) {
+ dev_err(BT_DEV, "Session %d not opened\n", *session);
+ err = -EACCES;
+ goto err_unlock_mutex;
+ }
+
+ kfree(cg2900_audio_sessions[*session]);
+ cg2900_audio_sessions[*session] = NULL;
+
+ info->nbr_of_users_active--;
+ if (info->nbr_of_users_active == 0) {
+ /* No more sessions open. Close channels */
+ pf_data_fm->close(pf_data_fm);
+ pf_data_bt->close(pf_data_bt);
+ info->state = CLOSED;
+ }
+
+ dev_info(BT_DEV, "Session %d closed\n", *session);
+
+ *session = 0;
+
+err_unlock_mutex:
+ mutex_unlock(&info->management_mutex);
+ return err;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_close);
+
+/**
+ * cg2900_audio_set_dai_config() - Sets the Digital Audio Interface configuration.
+ * @session: Session identifier this call is related to.
+ * @config: Pointer to the configuration to set.
+ * Allocated by caller, must not be NULL.
+ *
+ * Sets the Digital Audio Interface (DAI) configuration. The DAI is the external
+ * interface between the combo chip and the platform.
+ * For example the PCM or I2S interface.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL upon bad input parameter.
+ * -EIO if driver has not been opened.
+ * -ENOMEM upon allocation failure.
+ * -EACCES if trying to set unsupported configuration.
+ * Errors from @receive_bt_cmd_complete.
+ */
+int cg2900_audio_set_dai_config(unsigned int session,
+ struct cg2900_dai_config *config)
+{
+ int err = 0;
+ struct audio_user *audio_user;
+ struct audio_info *info;
+
+ pr_debug("cg2900_audio_set_dai_config session %d", session);
+
+ audio_user = get_session_user(session);
+ if (!audio_user)
+ return -EINVAL;
+
+ info = audio_user->info;
+
+ if (info->state != OPENED) {
+ dev_err(BT_DEV, "Audio driver not open\n");
+ return -EIO;
+ }
+
+ /* Different commands are used for PG1 and PG2 */
+ if (info->revision == CHIP_REV_PG1)
+ err = set_dai_config_pg1(audio_user, config);
+ else if (info->revision == CHIP_REV_PG2)
+ err = set_dai_config_pg2(audio_user, config);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_set_dai_config);
+
+/**
+ * cg2900_audio_get_dai_config() - Gets the current Digital Audio Interface configuration.
+ * @session: Session identifier this call is related to.
+ * @config: [out] Pointer to the configuration to get.
+ * Allocated by caller, must not be NULL.
+ *
+ * Gets the current Digital Audio Interface configuration. Currently this method
+ * can only be called after some one has called
+ * cg2900_audio_set_dai_config(), there is today no way of getting
+ * the static settings file parameters from this method.
+ * Note that the @port parameter within @config must be set when calling this
+ * function so that the ST-Ericsson CG2900 Audio driver will know which
+ * configuration to return.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL upon bad input parameter.
+ * -EIO if driver has not been opened or configuration has not been set.
+ */
+int cg2900_audio_get_dai_config(unsigned int session,
+ struct cg2900_dai_config *config)
+{
+ int err = 0;
+ struct audio_user *audio_user;
+ struct audio_info *info;
+
+ pr_debug("cg2900_audio_get_dai_config session %d", session);
+
+ if (!config) {
+ pr_err("NULL supplied as config structure");
+ return -EINVAL;
+ }
+
+ audio_user = get_session_user(session);
+ if (!audio_user)
+ return -EINVAL;
+
+ info = audio_user->info;
+
+ if (info->state != OPENED) {
+ dev_err(BT_DEV, "Audio driver not open\n");
+ return -EIO;
+ }
+
+ /*
+ * Return DAI configuration based on the received port.
+ * If port has not been configured return error.
+ */
+ switch (config->port) {
+ case PORT_0_I2S:
+ mutex_lock(&info->management_mutex);
+ if (info->i2s_config_known)
+ memcpy(&config->conf.i2s,
+ &info->i2s_config,
+ sizeof(config->conf.i2s));
+ else
+ err = -EIO;
+ mutex_unlock(&info->management_mutex);
+ break;
+
+ case PORT_1_I2S_PCM:
+ mutex_lock(&info->management_mutex);
+ if (info->i2s_pcm_config_known)
+ memcpy(&config->conf.i2s_pcm,
+ &info->i2s_pcm_config,
+ sizeof(config->conf.i2s_pcm));
+ else
+ err = -EIO;
+ mutex_unlock(&info->management_mutex);
+ break;
+
+ default:
+ dev_err(BT_DEV, "Unknown port configuration %d\n",
+ config->port);
+ err = -EIO;
+ break;
+ };
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_get_dai_config);
+
+/**
+ * cg2900_audio_config_endpoint() - Configures one endpoint in the combo chip's audio system.
+ * @session: Session identifier this call is related to.
+ * @config: Pointer to the endpoint's configuration structure.
+ *
+ * Configures one endpoint in the combo chip's audio system.
+ * Supported @endpoint_id values are:
+ * * ENDPOINT_BT_SCO_INOUT
+ * * ENDPOINT_BT_A2DP_SRC
+ * * ENDPOINT_FM_RX
+ * * ENDPOINT_FM_TX
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL upon bad input parameter.
+ * -EIO if driver has not been opened.
+ * -EACCES if supplied cg2900_dai_config struct contains not supported
+ * endpoint_id.
+ */
+int cg2900_audio_config_endpoint(unsigned int session,
+ struct cg2900_endpoint_config *config)
+{
+ struct audio_user *audio_user;
+ struct audio_info *info;
+
+ pr_debug("cg2900_audio_config_endpoint\n");
+
+ if (!config) {
+ pr_err("NULL supplied as configuration structure");
+ return -EINVAL;
+ }
+
+ audio_user = get_session_user(session);
+ if (!audio_user)
+ return -EINVAL;
+
+ info = audio_user->info;
+
+ if (info->state != OPENED) {
+ dev_err(BT_DEV, "Audio driver not open\n");
+ return -EIO;
+ }
+
+ switch (config->endpoint_id) {
+ case ENDPOINT_BT_SCO_INOUT:
+ case ENDPOINT_BT_A2DP_SRC:
+ case ENDPOINT_FM_RX:
+ case ENDPOINT_FM_TX:
+ add_endpoint(config, &info->endpoints);
+ break;
+
+ case ENDPOINT_PORT_0_I2S:
+ case ENDPOINT_PORT_1_I2S_PCM:
+ case ENDPOINT_SLIMBUS_VOICE:
+ case ENDPOINT_SLIMBUS_AUDIO:
+ case ENDPOINT_BT_A2DP_SNK:
+ case ENDPOINT_ANALOG_OUT:
+ case ENDPOINT_DSP_AUDIO_IN:
+ case ENDPOINT_DSP_AUDIO_OUT:
+ case ENDPOINT_DSP_VOICE_IN:
+ case ENDPOINT_DSP_VOICE_OUT:
+ case ENDPOINT_DSP_TONE_IN:
+ case ENDPOINT_BURST_BUFFER_IN:
+ case ENDPOINT_BURST_BUFFER_OUT:
+ case ENDPOINT_MUSIC_DECODER:
+ case ENDPOINT_HCI_AUDIO_IN:
+ default:
+ dev_err(BT_DEV, "Unsupported endpoint_id %d\n",
+ config->endpoint_id);
+ return -EACCES;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_config_endpoint);
+
+static bool is_dai_port(enum cg2900_audio_endpoint_id ep)
+{
+ /* These are the only supported ones */
+ return (ep == ENDPOINT_PORT_0_I2S) || (ep == ENDPOINT_PORT_1_I2S_PCM);
+}
+
+/**
+ * cg2900_audio_start_stream() - Connects two endpoints and starts the audio stream.
+ * @session: Session identifier this call is related to.
+ * @ep_1: One of the endpoints, no relation to direction or role.
+ * @ep_2: The other endpoint, no relation to direction or role.
+ * @stream_handle: Pointer where to store the stream handle.
+ * Allocated by caller, must not be NULL.
+ *
+ * Connects two endpoints and starts the audio stream.
+ * Note that the endpoints need to be configured before the stream is started;
+ * DAI endpoints, such as ENDPOINT_PORT_0_I2S, are
+ * configured through @cg2900_audio_set_dai_config() while other
+ * endpoints are configured through @cg2900_audio_config_endpoint().
+ *
+ * Supported @endpoint_id values are:
+ * * ENDPOINT_PORT_0_I2S
+ * * ENDPOINT_PORT_1_I2S_PCM
+ * * ENDPOINT_BT_SCO_INOUT
+ * * ENDPOINT_FM_RX
+ * * ENDPOINT_FM_TX
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL upon bad input parameter or unsupported configuration.
+ * -EIO if driver has not been opened.
+ * Errors from @conn_start_i2s_to_fm_rx, @conn_start_i2s_to_fm_tx, and
+ * @conn_start_pcm_to_sco.
+ */
+int cg2900_audio_start_stream(unsigned int session,
+ enum cg2900_audio_endpoint_id ep_1,
+ enum cg2900_audio_endpoint_id ep_2,
+ unsigned int *stream_handle)
+{
+ int err;
+ struct audio_user *audio_user;
+ struct audio_info *info;
+
+ pr_debug("cg2900_audio_start_stream session %d ep_1 %d ep_2 %d",
+ session, ep_1, ep_2);
+
+ audio_user = get_session_user(session);
+ if (!audio_user)
+ return -EINVAL;
+
+ info = audio_user->info;
+
+ if (info->state != OPENED) {
+ dev_err(BT_DEV, "Audio driver not open\n");
+ return -EIO;
+ }
+
+ /* Put digital interface in ep_1 to simplify comparison below */
+ if (!is_dai_port(ep_1)) {
+ /* Swap endpoints */
+ enum cg2900_audio_endpoint_id t = ep_1;
+ ep_1 = ep_2;
+ ep_2 = t;
+ }
+
+ if (ep_1 == ENDPOINT_PORT_1_I2S_PCM && ep_2 == ENDPOINT_BT_SCO_INOUT) {
+ err = conn_start_pcm_to_sco(audio_user, stream_handle);
+ } else if (ep_1 == ENDPOINT_PORT_0_I2S && ep_2 == ENDPOINT_FM_RX) {
+ err = conn_start_i2s_to_fm_rx(audio_user, stream_handle);
+ } else if (ep_1 == ENDPOINT_PORT_0_I2S && ep_2 == ENDPOINT_FM_TX) {
+ err = conn_start_i2s_to_fm_tx(audio_user, stream_handle);
+ } else {
+ dev_err(BT_DEV, "Endpoint config not handled: ep1: %d, "
+ "ep2: %d\n", ep_1, ep_2);
+ err = -EINVAL;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_start_stream);
+
+/**
+ * cg2900_audio_stop_stream() - Stops a stream and disconnects the endpoints.
+ * @session: Session identifier this call is related to.
+ * @stream_handle: Handle to the stream to stop.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL upon bad input parameter.
+ * -EIO if driver has not been opened.
+ */
+int cg2900_audio_stop_stream(unsigned int session, unsigned int stream_handle)
+{
+ struct audio_user *audio_user;
+ struct audio_info *info;
+
+ pr_debug("cg2900_audio_stop_stream handle %d", stream_handle);
+
+ audio_user = get_session_user(session);
+ if (!audio_user)
+ return -EINVAL;
+
+ info = audio_user->info;
+
+ if (info->state != OPENED) {
+ dev_err(BT_DEV, "Audio driver not open\n");
+ return -EIO;
+ }
+
+ return conn_stop_stream(audio_user, stream_handle);
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_stop_stream);
+
+/**
+ * audio_dev_open() - Open char device.
+ * @inode: Device driver information.
+ * @filp: Pointer to the file struct.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if allocation failed.
+ * Errors from @cg2900_audio_open.
+ */
+static int audio_dev_open(struct inode *inode, struct file *filp)
+{
+ int err;
+ struct char_dev_info *char_dev_info;
+ int minor;
+ struct audio_info *info = NULL;
+ struct audio_info *tmp;
+ struct list_head *cursor;
+
+ pr_debug("audio_dev_open");
+
+ minor = iminor(inode);
+
+ /* Find the info struct for this file */
+ list_for_each(cursor, &cg2900_audio_devices) {
+ tmp = list_entry(cursor, struct audio_info, list);
+ if (tmp->misc_dev.minor == minor) {
+ info = tmp;
+ break;
+ }
+ }
+ if (!info) {
+ pr_err("Could not identify device in inode");
+ return -EINVAL;
+ }
+
+ /*
+ * Allocate the char dev info structure. It will be stored inside
+ * the file pointer and supplied when file_ops are called.
+ * It's free'd in audio_dev_release.
+ */
+ char_dev_info = kzalloc(sizeof(*char_dev_info), GFP_KERNEL);
+ if (!char_dev_info) {
+ dev_err(BT_DEV, "Couldn't allocate char_dev_info\n");
+ return -ENOMEM;
+ }
+ filp->private_data = char_dev_info;
+ char_dev_info->info = info;
+
+ mutex_init(&char_dev_info->management_mutex);
+ mutex_init(&char_dev_info->rw_mutex);
+ skb_queue_head_init(&char_dev_info->rx_queue);
+
+ mutex_lock(&char_dev_info->management_mutex);
+ err = cg2900_audio_open(&char_dev_info->session, info->dev_bt->parent);
+ mutex_unlock(&char_dev_info->management_mutex);
+ if (err) {
+ dev_err(BT_DEV, "Failed to open CG2900 Audio driver (%d)\n",
+ err);
+ goto error_handling_free_mem;
+ }
+
+ return 0;
+
+error_handling_free_mem:
+ kfree(char_dev_info);
+ filp->private_data = NULL;
+ return err;
+}
+
+/**
+ * audio_dev_release() - Release char device.
+ * @inode: Device driver information.
+ * @filp: Pointer to the file struct.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EBADF if NULL pointer was supplied in private data.
+ * Errors from @cg2900_audio_close.
+ */
+static int audio_dev_release(struct inode *inode, struct file *filp)
+{
+ int err = 0;
+ struct char_dev_info *dev = filp->private_data;
+ struct audio_info *info = dev->info;
+
+ dev_dbg(BT_DEV, "audio_dev_release\n");
+
+ mutex_lock(&dev->management_mutex);
+ err = cg2900_audio_close(&dev->session);
+ if (err)
+ /*
+ * Just print the error. Still free the char_dev_info since we
+ * don't know the filp structure is valid after this call
+ */
+ dev_err(BT_DEV, "Error %d when closing CG2900 audio driver\n",
+ err);
+
+ mutex_unlock(&dev->management_mutex);
+
+ kfree(dev);
+ filp->private_data = NULL;
+
+ return err;
+}
+
+/**
+ * audio_dev_read() - Return information to the user from last @write call.
+ * @filp: Pointer to the file struct.
+ * @buf: Received buffer.
+ * @count: Size of buffer.
+ * @f_pos: Position in buffer.
+ *
+ * The audio_dev_read() function returns information from
+ * the last @write call to same char device.
+ * The data is in the following format:
+ * * OpCode of command for this data
+ * * Data content (Length of data is determined by the command OpCode, i.e.
+ * fixed for each command)
+ *
+ * Returns:
+ * Bytes successfully read (could be 0).
+ * -EBADF if NULL pointer was supplied in private data.
+ * -EFAULT if copy_to_user fails.
+ * -ENOMEM upon allocation failure.
+ */
+static ssize_t audio_dev_read(struct file *filp, char __user *buf, size_t count,
+ loff_t *f_pos)
+{
+ struct char_dev_info *dev = filp->private_data;
+ struct audio_info *info = dev->info;
+ unsigned int bytes_to_copy;
+ int err = 0;
+ struct sk_buff *skb;
+
+ dev_dbg(BT_DEV, "audio_dev_read count %d\n", count);
+
+ mutex_lock(&dev->rw_mutex);
+
+ skb = skb_dequeue(&dev->rx_queue);
+ if (!skb) {
+ /* No data to read */
+ bytes_to_copy = 0;
+ goto finished;
+ }
+
+ bytes_to_copy = min(count, (unsigned int)(skb->len));
+
+ err = copy_to_user(buf, skb->data, bytes_to_copy);
+ if (err) {
+ dev_err(BT_DEV, "copy_to_user error %d\n", err);
+ skb_queue_head(&dev->rx_queue, skb);
+ err = -EFAULT;
+ goto error_handling;
+ }
+
+ skb_pull(skb, bytes_to_copy);
+
+ if (skb->len > 0)
+ skb_queue_head(&dev->rx_queue, skb);
+ else
+ kfree_skb(skb);
+
+ goto finished;
+
+error_handling:
+ mutex_unlock(&dev->rw_mutex);
+ return (ssize_t)err;
+finished:
+ mutex_unlock(&dev->rw_mutex);
+ return bytes_to_copy;
+}
+
+/**
+ * audio_dev_write() - Call CG2900 Audio API function.
+ * @filp: Pointer to the file struct.
+ * @buf: Write buffer.
+ * @count: Size of the buffer write.
+ * @f_pos: Position of buffer.
+ *
+ * audio_dev_write() function executes supplied data and
+ * interprets it as if it was a function call to the CG2900 Audio API.
+ * The data is according to:
+ * * OpCode (4 bytes, see API).
+ * * Data according to OpCode (see API). No padding between parameters.
+ *
+ * Returns:
+ * Bytes successfully written (could be 0). Equals input @count if successful.
+ * -EBADF if NULL pointer was supplied in private data.
+ * -EFAULT if copy_from_user fails.
+ * Error codes from all CG2900 Audio API functions.
+ */
+static ssize_t audio_dev_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *f_pos)
+{
+ u8 *rec_data;
+ struct char_dev_info *dev = filp->private_data;
+ struct audio_info *info;
+ int err = 0;
+ int op_code = 0;
+ u8 *curr_data;
+ unsigned int stream_handle;
+ struct cg2900_dai_config dai_config;
+ struct cg2900_endpoint_config ep_config;
+ enum cg2900_audio_endpoint_id ep_1;
+ enum cg2900_audio_endpoint_id ep_2;
+ int bytes_left = count;
+
+ pr_debug("audio_dev_write count %d", count);
+
+ if (!dev) {
+ pr_err("No dev supplied in private data");
+ return -EBADF;
+ }
+ info = dev->info;
+
+ rec_data = kmalloc(count, GFP_KERNEL);
+ if (!rec_data) {
+ dev_err(BT_DEV, "kmalloc failed (%d bytes)\n", count);
+ return -ENOMEM;
+ }
+
+ mutex_lock(&dev->rw_mutex);
+
+ err = copy_from_user(rec_data, buf, count);
+ if (err) {
+ dev_err(BT_DEV, "copy_from_user failed (%d)\n", err);
+ err = -EFAULT;
+ goto finished_mutex_unlock;
+ }
+
+ /* Initialize temporary data pointer used to traverse the packet */
+ curr_data = rec_data;
+
+ op_code = curr_data[0];
+ /* OpCode is int size to keep data int aligned */
+ curr_data += sizeof(unsigned int);
+ bytes_left -= sizeof(unsigned int);
+
+ switch (op_code) {
+ case CG2900_OPCODE_SET_DAI_CONF:
+ if (bytes_left < sizeof(dai_config)) {
+ dev_err(BT_DEV, "Not enough data supplied for "
+ "CG2900_OPCODE_SET_DAI_CONF\n");
+ err = -EINVAL;
+ goto finished_mutex_unlock;
+ }
+ memcpy(&dai_config, curr_data, sizeof(dai_config));
+ dev_dbg(BT_DEV, "CG2900_OPCODE_SET_DAI_CONF port %d\n",
+ dai_config.port);
+ err = cg2900_audio_set_dai_config(dev->session, &dai_config);
+ break;
+
+ case CG2900_OPCODE_GET_DAI_CONF:
+ if (bytes_left < sizeof(dai_config)) {
+ dev_err(BT_DEV, "Not enough data supplied for "
+ "CG2900_OPCODE_GET_DAI_CONF\n");
+ err = -EINVAL;
+ goto finished_mutex_unlock;
+ }
+ /*
+ * Only need to copy the port really, but let's copy
+ * like this for simplicity. It's only test functionality
+ * after all.
+ */
+ memcpy(&dai_config, curr_data, sizeof(dai_config));
+ dev_dbg(BT_DEV, "CG2900_OPCODE_GET_DAI_CONF port %d\n",
+ dai_config.port);
+ err = cg2900_audio_get_dai_config(dev->session, &dai_config);
+ if (!err) {
+ int len;
+ struct sk_buff *skb;
+
+ /*
+ * Command succeeded. Store data so it can be returned
+ * when calling read.
+ */
+ len = sizeof(op_code) + sizeof(dai_config);
+ skb = alloc_skb(len, GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "CG2900_OPCODE_GET_DAI_CONF: "
+ "Could not allocate skb\n");
+ err = -ENOMEM;
+ goto finished_mutex_unlock;
+ }
+ memcpy(skb_put(skb, sizeof(op_code)), &op_code,
+ sizeof(op_code));
+ memcpy(skb_put(skb, sizeof(dai_config)),
+ &dai_config, sizeof(dai_config));
+ skb_queue_tail(&dev->rx_queue, skb);
+ }
+ break;
+
+ case CG2900_OPCODE_CONFIGURE_ENDPOINT:
+ if (bytes_left < sizeof(ep_config)) {
+ dev_err(BT_DEV, "Not enough data supplied for "
+ "CG2900_OPCODE_CONFIGURE_ENDPOINT\n");
+ err = -EINVAL;
+ goto finished_mutex_unlock;
+ }
+ memcpy(&ep_config, curr_data, sizeof(ep_config));
+ dev_dbg(BT_DEV, "CG2900_OPCODE_CONFIGURE_ENDPOINT ep_id %d\n",
+ ep_config.endpoint_id);
+ err = cg2900_audio_config_endpoint(dev->session, &ep_config);
+ break;
+
+ case CG2900_OPCODE_START_STREAM:
+ if (bytes_left < (sizeof(ep_1) + sizeof(ep_2))) {
+ dev_err(BT_DEV, "Not enough data supplied for "
+ "CG2900_OPCODE_START_STREAM\n");
+ err = -EINVAL;
+ goto finished_mutex_unlock;
+ }
+ memcpy(&ep_1, curr_data, sizeof(ep_1));
+ curr_data += sizeof(ep_1);
+ memcpy(&ep_2, curr_data, sizeof(ep_2));
+ dev_dbg(BT_DEV, "CG2900_OPCODE_START_STREAM ep_1 %d ep_2 %d\n",
+ ep_1, ep_2);
+
+ err = cg2900_audio_start_stream(dev->session,
+ ep_1, ep_2, &stream_handle);
+ if (!err) {
+ int len;
+ struct sk_buff *skb;
+
+ /*
+ * Command succeeded. Store data so it can be returned
+ * when calling read.
+ */
+ len = sizeof(op_code) + sizeof(stream_handle);
+ skb = alloc_skb(len, GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "CG2900_OPCODE_START_STREAM: "
+ "Could not allocate skb\n");
+ err = -ENOMEM;
+ goto finished_mutex_unlock;
+ }
+ memcpy(skb_put(skb, sizeof(op_code)), &op_code,
+ sizeof(op_code));
+ memcpy(skb_put(skb, sizeof(stream_handle)),
+ &stream_handle, sizeof(stream_handle));
+ skb_queue_tail(&dev->rx_queue, skb);
+
+ dev_dbg(BT_DEV, "stream_handle %d\n", stream_handle);
+ }
+ break;
+
+ case CG2900_OPCODE_STOP_STREAM:
+ if (bytes_left < sizeof(stream_handle)) {
+ dev_err(BT_DEV, "Not enough data supplied for "
+ "CG2900_OPCODE_STOP_STREAM\n");
+ err = -EINVAL;
+ goto finished_mutex_unlock;
+ }
+ memcpy(&stream_handle, curr_data, sizeof(stream_handle));
+ dev_dbg(BT_DEV, "CG2900_OPCODE_STOP_STREAM stream_handle %d\n",
+ stream_handle);
+ err = cg2900_audio_stop_stream(dev->session, stream_handle);
+ break;
+
+ default:
+ dev_err(BT_DEV, "Received bad op_code %d\n", op_code);
+ break;
+ };
+
+finished_mutex_unlock:
+ kfree(rec_data);
+ mutex_unlock(&dev->rw_mutex);
+
+ if (err)
+ return err;
+ else
+ return count;
+}
+
+/**
+ * audio_dev_poll() - Handle POLL call to the interface.
+ * @filp: Pointer to the file struct.
+ * @wait: Poll table supplied to caller.
+ *
+ * This function is used by the User Space application to see if the device is
+ * still open and if there is any data available for reading.
+ *
+ * Returns:
+ * Mask of current set POLL values.
+ */
+static unsigned int audio_dev_poll(struct file *filp, poll_table *wait)
+{
+ struct char_dev_info *dev = filp->private_data;
+ struct audio_info *info;
+ unsigned int mask = 0;
+
+ if (!dev) {
+ pr_err("No dev supplied in private data");
+ return POLLERR | POLLRDHUP;
+ }
+ info = dev->info;
+
+ if (RESET == info->state)
+ mask |= POLLERR | POLLRDHUP | POLLPRI;
+ else
+ /* Unless RESET we can transmit */
+ mask |= POLLOUT;
+
+ if (!skb_queue_empty(&dev->rx_queue))
+ mask |= POLLIN | POLLRDNORM;
+
+ return mask;
+}
+
+static const struct file_operations char_dev_fops = {
+ .open = audio_dev_open,
+ .release = audio_dev_release,
+ .read = audio_dev_read,
+ .write = audio_dev_write,
+ .poll = audio_dev_poll
+};
+
+/**
+ * probe_common() - Register misc device.
+ * @info: Audio info structure.
+ * @dev: Current device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if allocation fails.
+ * Error codes from misc_register.
+ */
+static int probe_common(struct audio_info *info, struct device *dev)
+{
+ struct audio_cb_info *cb_info;
+ struct cg2900_user_data *pf_data;
+ int err;
+
+ cb_info = kzalloc(sizeof(*cb_info), GFP_KERNEL);
+ if (!cb_info) {
+ dev_err(dev, "Failed to allocate cb_info\n");
+ return -ENOMEM;
+ }
+ init_waitqueue_head(&cb_info->wq);
+ skb_queue_head_init(&cb_info->skb_queue);
+
+ pf_data = dev_get_platdata(dev);
+ cg2900_set_usr(pf_data, cb_info);
+ pf_data->dev = dev;
+ pf_data->read_cb = read_cb;
+ pf_data->reset_cb = reset_cb;
+
+ /* Only register misc device when both devices (BT and FM) are probed */
+ if (!info->dev_bt || !info->dev_fm)
+ return 0;
+
+ /* Prepare and register MISC device */
+ info->misc_dev.minor = MISC_DYNAMIC_MINOR;
+ info->misc_dev.name = NAME;
+ info->misc_dev.fops = &char_dev_fops;
+ info->misc_dev.parent = dev;
+ info->misc_dev.mode = S_IRUGO | S_IWUGO;
+
+ err = misc_register(&info->misc_dev);
+ if (err) {
+ dev_err(dev, "Error %d registering misc dev\n", err);
+ return err;
+ }
+ info->misc_registered = true;
+
+ dev_info(dev, "CG2900 Audio driver started\n");
+ return 0;
+}
+
+/**
+ * cg2900_audio_bt_probe() - Initialize CG2900 BT audio resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if allocation fails.
+ * -EEXIST if device has already been started.
+ * Error codes from probe_common.
+ */
+static int __devinit cg2900_audio_bt_probe(struct platform_device *pdev)
+{
+ int err;
+ struct audio_info *info;
+
+ dev_dbg(&pdev->dev, "cg2900_audio_bt_probe\n");
+
+ info = get_info(&pdev->dev);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ info->dev_bt = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, info);
+
+ err = probe_common(info, &pdev->dev);
+ if (err) {
+ dev_err(&pdev->dev, "Could not probe audio BT (%d)\n", err);
+ dev_set_drvdata(&pdev->dev, NULL);
+ device_removed(info);
+ }
+
+ return err;
+}
+
+/**
+ * cg2900_audio_bt_probe() - Initialize CG2900 FM audio resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if allocation fails.
+ * -EEXIST if device has already been started.
+ * Error codes from probe_common.
+ */
+static int __devinit cg2900_audio_fm_probe(struct platform_device *pdev)
+{
+ int err;
+ struct audio_info *info;
+
+ dev_dbg(&pdev->dev, "cg2900_audio_fm_probe\n");
+
+ info = get_info(&pdev->dev);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ info->dev_fm = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, info);
+
+ err = probe_common(info, &pdev->dev);
+ if (err) {
+ dev_err(&pdev->dev, "Could not probe audio FM (%d)\n", err);
+ dev_set_drvdata(&pdev->dev, NULL);
+ device_removed(info);
+ }
+
+ return err;
+}
+
+/**
+ * common_remove() - Dergister misc device.
+ * @info: Audio info structure.
+ * @dev: Current device.
+ *
+ * Returns:
+ * 0 if success.
+ * Error codes from misc_deregister.
+ */
+static int common_remove(struct audio_info *info, struct device *dev)
+{
+ int err;
+ struct audio_cb_info *cb_info;
+ struct cg2900_user_data *pf_data;
+
+ pf_data = dev_get_platdata(dev);
+ cb_info = cg2900_get_usr(pf_data);
+ skb_queue_purge(&cb_info->skb_queue);
+ wake_up_all(&cb_info->wq);
+ kfree(cb_info);
+
+ if (!info->misc_registered)
+ return 0;
+
+ err = misc_deregister(&info->misc_dev);
+ if (err)
+ dev_err(dev, "Error %d deregistering misc dev\n", err);
+ info->misc_registered = false;
+
+ dev_info(dev, "CG2900 Audio driver removed\n");
+ return err;
+}
+
+/**
+ * cg2900_audio_bt_remove() - Release CG2900 audio resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success.
+ * Error codes from common_remove.
+ */
+static int __devexit cg2900_audio_bt_remove(struct platform_device *pdev)
+{
+ int err;
+ struct audio_info *info;
+
+ dev_dbg(&pdev->dev, "cg2900_audio_bt_remove\n");
+
+ info = dev_get_drvdata(&pdev->dev);
+
+ info->dev_bt = NULL;
+
+ err = common_remove(info, &pdev->dev);
+ if (err)
+ dev_err(&pdev->dev,
+ "cg2900_audio_bt_remove:common_remove failed\n");
+
+ device_removed(info);
+
+ return 0;
+}
+
+/**
+ * cg2900_audio_fm_remove() - Release CG2900 audio resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success.
+ * Error codes from common_remove.
+ */
+static int __devexit cg2900_audio_fm_remove(struct platform_device *pdev)
+{
+ int err;
+ struct audio_info *info;
+
+ dev_dbg(&pdev->dev, "cg2900_audio_fm_remove\n");
+
+ info = dev_get_drvdata(&pdev->dev);
+
+ info->dev_fm = NULL;
+
+ err = common_remove(info, &pdev->dev);
+ if (err)
+ dev_err(&pdev->dev,
+ "cg2900_audio_fm_remove:common_remove failed\n");
+
+ device_removed(info);
+
+ return 0;
+}
+
+static struct platform_driver cg2900_audio_bt_driver = {
+ .driver = {
+ .name = "cg2900-audiobt",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_audio_bt_probe,
+ .remove = __devexit_p(cg2900_audio_bt_remove),
+};
+
+static struct platform_driver cg2900_audio_fm_driver = {
+ .driver = {
+ .name = "cg2900-audiofm",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_audio_fm_probe,
+ .remove = __devexit_p(cg2900_audio_fm_remove),
+};
+
+/**
+ * cg2900_audio_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init cg2900_audio_init(void)
+{
+ int err;
+
+ pr_debug("cg2900_audio_init");
+
+ err = platform_driver_register(&cg2900_audio_bt_driver);
+ if (err)
+ return err;
+ return platform_driver_register(&cg2900_audio_fm_driver);
+}
+
+/**
+ * cg2900_audio_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit cg2900_audio_exit(void)
+{
+ pr_debug("cg2900_audio_exit");
+ platform_driver_unregister(&cg2900_audio_fm_driver);
+ platform_driver_unregister(&cg2900_audio_bt_driver);
+}
+
+module_init(cg2900_audio_init);
+module_exit(cg2900_audio_exit);
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_AUTHOR("Kjell Andersson ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux Bluetooth Audio ST-Ericsson controller");
diff --git a/drivers/staging/cg2900/mfd/cg2900_char_devices.c b/drivers/staging/cg2900/mfd/cg2900_char_devices.c
new file mode 100644
index 0000000..c092175
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_char_devices.c
@@ -0,0 +1,701 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson connectivity controller.
+ */
+#define NAME "cg2900_char_dev"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+
+#include "cg2900.h"
+#include "cg2900_core.h"
+
+#define MAIN_DEV (dev->dev)
+
+/**
+ * struct char_dev_user - Stores device information.
+ * @dev: Current device.
+ * @miscdev: Registered device struct.
+ * @name: Name of device.
+ * @rx_queue: Data queue.
+ * @rx_wait_queue: Wait queue.
+ * @reset_wait_queue: Reset Wait queue.
+ * @read_mutex: Read mutex.
+ * @write_mutex: Write mutex.
+ * @list: List header for inserting into device list.
+ */
+struct char_dev_user {
+ struct device *dev;
+ struct miscdevice miscdev;
+ char *name;
+ struct sk_buff_head rx_queue;
+ wait_queue_head_t rx_wait_queue;
+ wait_queue_head_t reset_wait_queue;
+ struct mutex read_mutex;
+ struct mutex write_mutex;
+ struct list_head list;
+};
+
+/**
+ * struct char_info - Stores all current users.
+ * @open_mutex: Open mutex (used for both open and release).
+ * @man_mutex: Management mutex.
+ * @dev_users: List of char dev users.
+ */
+struct char_info {
+ struct mutex open_mutex;
+ struct mutex man_mutex;
+ struct list_head dev_users;
+};
+
+static struct char_info *char_info;
+
+/**
+ * char_dev_read_cb() - Handle data received from controller.
+ * @dev: Device receiving data.
+ * @skb: Buffer with data coming from controller.
+ *
+ * The char_dev_read_cb() function handles data received from the CG2900 driver.
+ */
+static void char_dev_read_cb(struct cg2900_user_data *dev, struct sk_buff *skb)
+{
+ struct char_dev_user *char_dev = dev_get_drvdata(dev->dev);
+
+ dev_dbg(dev->dev, "char_dev_read_cb len %d\n", skb->len);
+
+ skb_queue_tail(&char_dev->rx_queue, skb);
+
+ wake_up_interruptible(&char_dev->rx_wait_queue);
+}
+
+/**
+ * char_dev_reset_cb() - Handle reset from controller.
+ * @dev: Device resetting.
+ *
+ * The char_dev_reset_cb() function handles reset from the CG2900 driver.
+ */
+static void char_dev_reset_cb(struct cg2900_user_data *dev)
+{
+ struct char_dev_user *char_dev = dev_get_drvdata(dev->dev);
+
+ dev_dbg(dev->dev, "char_dev_reset_cb\n");
+
+ wake_up_interruptible(&char_dev->rx_wait_queue);
+ wake_up_interruptible(&char_dev->reset_wait_queue);
+}
+
+/**
+ * char_dev_open() - Open char device.
+ * @inode: Device driver information.
+ * @filp: Pointer to the file struct.
+ *
+ * The char_dev_open() function opens the char device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if device cannot be found in device list.
+ * Error codes from cg2900->open.
+ */
+static int char_dev_open(struct inode *inode, struct file *filp)
+{
+ int err;
+ int minor;
+ struct char_dev_user *dev = NULL;
+ struct char_dev_user *tmp;
+ struct list_head *cursor;
+ struct cg2900_user_data *user;
+
+ mutex_lock(&char_info->open_mutex);
+
+ minor = iminor(inode);
+
+ /* Find the device for this file */
+ mutex_lock(&char_info->man_mutex);
+ list_for_each(cursor, &char_info->dev_users) {
+ tmp = list_entry(cursor, struct char_dev_user, list);
+ if (tmp->miscdev.minor == minor) {
+ dev = tmp;
+ break;
+ }
+ }
+ mutex_unlock(&char_info->man_mutex);
+ if (!dev) {
+ pr_err("Could not identify device in inode");
+ err = -EINVAL;
+ goto error_handling;
+ }
+
+ filp->private_data = dev;
+ user = dev_get_platdata(dev->dev);
+
+ /* First initiate wait queues for this device. */
+ init_waitqueue_head(&dev->rx_wait_queue);
+ init_waitqueue_head(&dev->reset_wait_queue);
+
+ /* Register to CG2900 Driver */
+ err = user->open(user);
+ if (err) {
+ dev_err(MAIN_DEV,
+ "Couldn't register to CG2900 for H:4 channel %s\n",
+ dev->name);
+ goto error_handling;
+ }
+ dev_info(MAIN_DEV, "char_dev %s opened\n", dev->name);
+
+error_handling:
+ mutex_unlock(&char_info->open_mutex);
+ return err;
+}
+
+/**
+ * char_dev_release() - Release char device.
+ * @inode: Device driver information.
+ * @filp: Pointer to the file struct.
+ *
+ * The char_dev_release() function release the char device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EBADF if NULL pointer was supplied in private data.
+ */
+static int char_dev_release(struct inode *inode, struct file *filp)
+{
+ int err = 0;
+ struct char_dev_user *dev = filp->private_data;
+ struct cg2900_user_data *user;
+
+ pr_debug("char_dev_release");
+
+ if (!dev) {
+ pr_err("Calling with NULL pointer");
+ return -EBADF;
+ }
+
+ mutex_lock(&char_info->open_mutex);
+ mutex_lock(&dev->read_mutex);
+ mutex_lock(&dev->write_mutex);
+
+ user = dev_get_platdata(dev->dev);
+ if (user->opened)
+ user->close(user);
+
+ dev_info(MAIN_DEV, "char_dev %s closed\n", dev->name);
+
+ filp->private_data = NULL;
+ wake_up_interruptible(&dev->rx_wait_queue);
+ wake_up_interruptible(&dev->reset_wait_queue);
+
+ mutex_unlock(&dev->write_mutex);
+ mutex_unlock(&dev->read_mutex);
+ mutex_unlock(&char_info->open_mutex);
+
+ return err;
+}
+
+/**
+ * char_dev_read() - Queue and copy buffer to user.
+ * @filp: Pointer to the file struct.
+ * @buf: Received buffer.
+ * @count: Size of buffer.
+ * @f_pos: Position in buffer.
+ *
+ * The char_dev_read() function queues and copy the received buffer to
+ * the user space char device. If no data is available this function will block.
+ *
+ * Returns:
+ * Bytes successfully read (could be 0).
+ * -EBADF if NULL pointer was supplied in private data.
+ * -EFAULT if copy_to_user fails.
+ * Error codes from wait_event_interruptible.
+ */
+static ssize_t char_dev_read(struct file *filp, char __user *buf, size_t count,
+ loff_t *f_pos)
+{
+ struct char_dev_user *dev = filp->private_data;
+ struct cg2900_user_data *user;
+ struct sk_buff *skb;
+ int bytes_to_copy;
+ int err = 0;
+
+ pr_debug("char_dev_read");
+
+ if (!dev) {
+ pr_err("Calling with NULL pointer");
+ return -EBADF;
+ }
+ mutex_lock(&dev->read_mutex);
+
+ user = dev_get_platdata(dev->dev);
+
+ if (user->opened && skb_queue_empty(&dev->rx_queue)) {
+ err = wait_event_interruptible(dev->rx_wait_queue,
+ (!(skb_queue_empty(&dev->rx_queue))) ||
+ !user->opened);
+ if (err) {
+ dev_err(MAIN_DEV, "Failed to wait for event\n");
+ goto error_handling;
+ }
+ }
+
+ if (!user->opened) {
+ dev_err(MAIN_DEV, "Channel has been closed\n");
+ err = -EBADF;
+ goto error_handling;
+ }
+
+ skb = skb_dequeue(&dev->rx_queue);
+ if (!skb) {
+ dev_dbg(MAIN_DEV,
+ "skb queue is empty - return with zero bytes\n");
+ bytes_to_copy = 0;
+ goto finished;
+ }
+
+ bytes_to_copy = min(count, skb->len);
+
+ err = copy_to_user(buf, skb->data, bytes_to_copy);
+ if (err) {
+ dev_err(MAIN_DEV, "Error %d from copy_to_user\n", err);
+ skb_queue_head(&dev->rx_queue, skb);
+ err = -EFAULT;
+ goto error_handling;
+ }
+
+ skb_pull(skb, bytes_to_copy);
+
+ if (skb->len > 0)
+ skb_queue_head(&dev->rx_queue, skb);
+ else
+ kfree_skb(skb);
+
+ goto finished;
+
+error_handling:
+ mutex_unlock(&dev->read_mutex);
+ return (ssize_t)err;
+finished:
+ mutex_unlock(&dev->read_mutex);
+ return bytes_to_copy;
+}
+
+/**
+ * char_dev_write() - Copy buffer from user and write to CG2900 driver.
+ * @filp: Pointer to the file struct.
+ * @buf: Write buffer.
+ * @count: Size of the buffer write.
+ * @f_pos: Position of buffer.
+ *
+ * Returns:
+ * Bytes successfully written (could be 0).
+ * -EBADF if NULL pointer was supplied in private data.
+ * -EFAULT if copy_from_user fails.
+ */
+static ssize_t char_dev_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *f_pos)
+{
+ struct sk_buff *skb;
+ struct char_dev_user *dev = filp->private_data;
+ struct cg2900_user_data *user;
+ int err = 0;
+
+ pr_debug("char_dev_write");
+
+ if (!dev) {
+ pr_err("Calling with NULL pointer");
+ return -EBADF;
+ }
+
+ user = dev_get_platdata(dev->dev);
+ if (!user->opened) {
+ dev_err(MAIN_DEV, "char_dev_write: Channel not opened\n");
+ return -EACCES;
+ }
+
+ mutex_lock(&dev->write_mutex);
+
+ skb = user->alloc_skb(count, GFP_ATOMIC);
+ if (!skb) {
+ dev_err(MAIN_DEV, "Couldn't allocate sk_buff with length %d\n",
+ count);
+ goto error_handling;
+ }
+
+ err = copy_from_user(skb_put(skb, count), buf, count);
+ if (err) {
+ dev_err(MAIN_DEV, "Error %d from copy_from_user\n", err);
+ kfree_skb(skb);
+ err = -EFAULT;
+ goto error_handling;
+ }
+
+ err = user->write(user, skb);
+ if (err) {
+ dev_err(MAIN_DEV, "cg2900_write failed (%d)\n", err);
+ kfree_skb(skb);
+ goto error_handling;
+ }
+
+ mutex_unlock(&dev->write_mutex);
+ return count;
+
+error_handling:
+ mutex_unlock(&dev->write_mutex);
+ return err;
+}
+
+/**
+ * char_dev_unlocked_ioctl() - Handle IOCTL call to the interface.
+ * @filp: Pointer to the file struct.
+ * @cmd: IOCTL command.
+ * @arg: IOCTL argument.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if supplied cmd is not supported.
+ * For cmd CG2900_CHAR_DEV_IOCTL_CHECK4RESET 0x01 is returned if device is
+ * reset and 0x02 is returned if device is closed.
+ */
+static long char_dev_unlocked_ioctl(struct file *filp, unsigned int cmd,
+ unsigned long arg)
+{
+ struct char_dev_user *dev = filp->private_data;
+ struct cg2900_user_data *user;
+ struct cg2900_rev_data rev_data;
+ int err = 0;
+ int ret_val;
+ void __user *user_arg = (void __user *)arg;
+
+ dev_dbg(dev->dev, "char_dev_unlocked_ioctl for %s\n"
+ "\tDIR: %d\n"
+ "\tTYPE: %d\n"
+ "\tNR: %d\n"
+ "\tSIZE: %d",
+ dev->name, _IOC_DIR(cmd), _IOC_TYPE(cmd), _IOC_NR(cmd),
+ _IOC_SIZE(cmd));
+
+ user = dev_get_platdata(dev->dev);
+
+ switch (cmd) {
+ case CG2900_CHAR_DEV_IOCTL_RESET:
+ if (!user->opened)
+ return -EACCES;
+ dev_dbg(MAIN_DEV, "ioctl reset command for device %s\n",
+ dev->name);
+ err = user->reset(user);
+ break;
+
+ case CG2900_CHAR_DEV_IOCTL_CHECK4RESET:
+ if (user->opened)
+ ret_val = CG2900_CHAR_DEV_IOCTL_EVENT_IDLE;
+ else
+ ret_val = CG2900_CHAR_DEV_IOCTL_EVENT_RESET;
+
+ dev_dbg(MAIN_DEV, "ioctl check for reset command for device %s",
+ dev->name);
+
+ err = copy_to_user(user_arg, &ret_val, sizeof(ret_val));
+ if (err) {
+ dev_err(MAIN_DEV,
+ "Error %d from copy_to_user for reset\n", err);
+ return -EFAULT;
+ }
+ break;
+
+ case CG2900_CHAR_DEV_IOCTL_GET_REVISION:
+ if (!user->get_local_revision(user, &rev_data)) {
+ dev_err(MAIN_DEV, "No revision data available\n");
+ return -EIO;
+ }
+ dev_dbg(MAIN_DEV, "ioctl check for local revision info\n"
+ "\trevision 0x%04X\n"
+ "\tsub_version 0x%04X\n",
+ rev_data.revision, rev_data.sub_version);
+ err = copy_to_user(user_arg, &rev_data, sizeof(rev_data));
+ if (err) {
+ dev_err(MAIN_DEV,
+ "Error %d from copy_to_user for "
+ "revision\n", err);
+ return -EFAULT;
+ }
+ break;
+
+ default:
+ dev_err(MAIN_DEV, "Unknown ioctl command %08X\n", cmd);
+ err = -EINVAL;
+ break;
+ };
+
+ return err;
+}
+
+/**
+ * char_dev_poll() - Handle POLL call to the interface.
+ * @filp: Pointer to the file struct.
+ * @wait: Poll table supplied to caller.
+ *
+ * Returns:
+ * Mask of current set POLL values
+ */
+static unsigned int char_dev_poll(struct file *filp, poll_table *wait)
+{
+ struct char_dev_user *dev = filp->private_data;
+ struct cg2900_user_data *user;
+ unsigned int mask = 0;
+
+ if (!dev) {
+ pr_debug("Device not open");
+ return POLLERR | POLLRDHUP;
+ }
+
+ user = dev_get_platdata(dev->dev);
+
+ poll_wait(filp, &dev->reset_wait_queue, wait);
+ poll_wait(filp, &dev->rx_wait_queue, wait);
+
+ if (!user->opened)
+ mask |= POLLERR | POLLRDHUP | POLLPRI;
+ else
+ mask |= POLLOUT; /* We can TX unless there is an error */
+
+ if (!(skb_queue_empty(&dev->rx_queue)))
+ mask |= POLLIN | POLLRDNORM;
+
+ return mask;
+}
+
+/*
+ * struct char_dev_fops - Char devices file operations.
+ * @read: Function that reads from the char device.
+ * @write: Function that writes to the char device.
+ * @unlocked_ioctl: Function that performs IO operations with
+ * the char device.
+ * @poll: Function that checks if there are possible operations
+ * with the char device.
+ * @open: Function that opens the char device.
+ * @release: Function that release the char device.
+ */
+static const struct file_operations char_dev_fops = {
+ .read = char_dev_read,
+ .write = char_dev_write,
+ .unlocked_ioctl = char_dev_unlocked_ioctl,
+ .poll = char_dev_poll,
+ .open = char_dev_open,
+ .release = char_dev_release
+};
+
+/**
+ * remove_dev() - Remove char device structure for device.
+ * @dev_usr: Char device user.
+ *
+ * The remove_dev() function releases the char_dev structure for this device.
+ */
+static void remove_dev(struct char_dev_user *dev_usr)
+{
+ if (!dev_usr)
+ return;
+
+ dev_dbg(dev_usr->dev,
+ "Removing char device %s with major %d and minor %d\n",
+ dev_usr->name,
+ MAJOR(dev_usr->miscdev.this_device->devt),
+ MINOR(dev_usr->miscdev.this_device->devt));
+
+ skb_queue_purge(&dev_usr->rx_queue);
+
+ mutex_destroy(&dev_usr->read_mutex);
+ mutex_destroy(&dev_usr->write_mutex);
+
+ /* Remove device node in file system. */
+ misc_deregister(&dev_usr->miscdev);
+ kfree(dev_usr);
+}
+
+/**
+ * cg2900_char_probe() - Initialize char device module.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM if allocation fails.
+ * -EACCES if device already have been initiated.
+ */
+static int __devinit cg2900_char_probe(struct platform_device *pdev)
+{
+ int err = 0;
+ struct char_dev_user *dev_usr;
+ struct cg2900_user_data *user;
+
+ dev_dbg(&pdev->dev, "cg2900_char_probe\n");
+
+ user = dev_get_platdata(&pdev->dev);
+ user->dev = &pdev->dev;
+ user->read_cb = char_dev_read_cb;
+ user->reset_cb = char_dev_reset_cb;
+
+ dev_usr = kzalloc(sizeof(*dev_usr), GFP_KERNEL);
+ if (!dev_usr) {
+ dev_err(&pdev->dev, "Couldn't allocate dev_usr\n");
+ return -ENOMEM;
+ }
+
+ dev_set_drvdata(&pdev->dev, dev_usr);
+ dev_usr->dev = &pdev->dev;
+
+ /* Store device name */
+ dev_usr->name = user->channel_data.char_dev_name;
+
+ /* Prepare miscdevice struct before registering the device */
+ dev_usr->miscdev.minor = MISC_DYNAMIC_MINOR;
+ dev_usr->miscdev.name = dev_usr->name;
+ dev_usr->miscdev.nodename = dev_usr->name;
+ dev_usr->miscdev.fops = &char_dev_fops;
+ dev_usr->miscdev.parent = &pdev->dev;
+ dev_usr->miscdev.mode = S_IRUGO | S_IWUGO;
+
+ err = misc_register(&dev_usr->miscdev);
+ if (err) {
+ dev_err(&pdev->dev, "Error %d registering misc dev\n", err);
+ goto err_free_usr;
+ }
+
+ dev_dbg(&pdev->dev, "Added char device %s with major %d and minor %d\n",
+ dev_usr->name, MAJOR(dev_usr->miscdev.this_device->devt),
+ MINOR(dev_usr->miscdev.this_device->devt));
+
+ mutex_init(&dev_usr->read_mutex);
+ mutex_init(&dev_usr->write_mutex);
+
+ skb_queue_head_init(&dev_usr->rx_queue);
+
+ mutex_lock(&char_info->man_mutex);
+ list_add_tail(&dev_usr->list, &char_info->dev_users);
+ mutex_unlock(&char_info->man_mutex);
+
+ return 0;
+
+err_free_usr:
+ kfree(dev_usr);
+ dev_set_drvdata(&pdev->dev, NULL);
+ return err;
+}
+
+/**
+ * cg2900_char_remove() - Release the char device module.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success (always success).
+ */
+static int __devexit cg2900_char_remove(struct platform_device *pdev)
+{
+ struct list_head *cursor, *next;
+ struct char_dev_user *tmp;
+ struct char_dev_user *user;
+
+ dev_dbg(&pdev->dev, "cg2900_char_remove\n");
+
+ user = dev_get_drvdata(&pdev->dev);
+
+ mutex_lock(&char_info->man_mutex);
+ list_for_each_safe(cursor, next, &char_info->dev_users) {
+ tmp = list_entry(cursor, struct char_dev_user, list);
+ if (tmp == user) {
+ list_del(cursor);
+ remove_dev(tmp);
+ dev_set_drvdata(&pdev->dev, NULL);
+ break;
+ }
+ }
+ mutex_unlock(&char_info->man_mutex);
+ return 0;
+}
+
+static struct platform_driver cg2900_char_driver = {
+ .driver = {
+ .name = "cg2900-chardev",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_char_probe,
+ .remove = __devexit_p(cg2900_char_remove),
+};
+
+/**
+ * cg2900_char_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init cg2900_char_init(void)
+{
+ pr_debug("cg2900_char_init");
+
+ /* Initialize private data. */
+ char_info = kzalloc(sizeof(*char_info), GFP_ATOMIC);
+ if (!char_info) {
+ pr_err("Could not alloc char_info struct");
+ return -ENOMEM;
+ }
+
+ mutex_init(&char_info->open_mutex);
+ mutex_init(&char_info->man_mutex);
+ INIT_LIST_HEAD(&char_info->dev_users);
+
+ return platform_driver_register(&cg2900_char_driver);
+}
+
+/**
+ * cg2900_char_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit cg2900_char_exit(void)
+{
+ struct list_head *cursor, *next;
+ struct char_dev_user *tmp;
+
+ pr_debug("cg2900_char_exit");
+
+ platform_driver_unregister(&cg2900_char_driver);
+
+ if (!char_info)
+ return;
+
+ list_for_each_safe(cursor, next, &char_info->dev_users) {
+ tmp = list_entry(cursor, struct char_dev_user, list);
+ list_del(cursor);
+ remove_dev(tmp);
+ }
+
+ mutex_destroy(&char_info->open_mutex);
+ mutex_destroy(&char_info->man_mutex);
+
+ kfree(char_info);
+ char_info = NULL;
+}
+
+module_init(cg2900_char_init);
+module_exit(cg2900_char_exit);
+
+MODULE_AUTHOR("Henrik Possung ST-Ericsson");
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ST-Ericsson CG2900 Char Devices Driver");
diff --git a/drivers/staging/cg2900/mfd/cg2900_chip.c b/drivers/staging/cg2900/mfd/cg2900_chip.c
new file mode 100644
index 0000000..7479c0f
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_chip.c
@@ -0,0 +1,3415 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 GPS/BT/FM controller.
+ */
+#define NAME "cg2900_chip"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <asm/byteorder.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/stat.h>
+#include <linux/string.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/core.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+
+#include "cg2900.h"
+#include "cg2900_chip.h"
+#include "cg2900_core.h"
+#include "cg2900_lib.h"
+
+#define MAIN_DEV (main_info->dev)
+#define BOOT_DEV (info->user_in_charge->dev)
+
+#define WQ_NAME "cg2900_chip_wq"
+
+/*
+ * After waiting the first 500 ms we should just try to get the selftest results
+ * for another number of poll attempts
+ */
+#define MAX_NBR_OF_POLLS 50
+
+#define LINE_TOGGLE_DETECT_TIMEOUT 50 /* ms */
+#define CHIP_READY_TIMEOUT 100 /* ms */
+#define CHIP_STARTUP_TIMEOUT 15000 /* ms */
+#define CHIP_SHUTDOWN_TIMEOUT 15000 /* ms */
+#define POWER_SW_OFF_WAIT 500 /* ms */
+#define SELFTEST_INITIAL 500 /* ms */
+#define SELFTEST_POLLING 20 /* ms */
+
+/** CHANNEL_BT_CMD - Bluetooth HCI H:4 channel
+ * for Bluetooth commands in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_BT_CMD 0x01
+
+/** CHANNEL_BT_ACL - Bluetooth HCI H:4 channel
+ * for Bluetooth ACL data in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_BT_ACL 0x02
+
+/** CHANNEL_BT_EVT - Bluetooth HCI H:4 channel
+ * for Bluetooth events in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_BT_EVT 0x04
+
+/** CHANNEL_FM_RADIO - Bluetooth HCI H:4 channel
+ * for FM radio in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_FM_RADIO 0x08
+
+/** CHANNEL_GNSS - Bluetooth HCI H:4 channel
+ * for GNSS in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_GNSS 0x09
+
+/** CHANNEL_DEBUG - Bluetooth HCI H:4 channel
+ * for internal debug data in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_DEBUG 0x0B
+
+/** CHANNEL_STE_TOOLS - Bluetooth HCI H:4 channel
+ * for development tools data in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_STE_TOOLS 0x0D
+
+/** CHANNEL_HCI_LOGGER - Bluetooth HCI H:4 channel
+ * for logging all transmitted H4 packets (on all channels).
+ */
+#define CHANNEL_HCI_LOGGER 0xFA
+
+/** CHANNEL_CORE - Bluetooth HCI H:4 channel
+ * for user space control of the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_CORE 0xFD
+
+/** CG2900_BT_CMD - Bluetooth HCI H4 channel for Bluetooth commands.
+ */
+#define CG2900_BT_CMD "cg2900_bt_cmd"
+
+/** CG2900_BT_ACL - Bluetooth HCI H4 channel for Bluetooth ACL data.
+ */
+#define CG2900_BT_ACL "cg2900_bt_acl"
+
+/** CG2900_BT_EVT - Bluetooth HCI H4 channel for Bluetooth events.
+ */
+#define CG2900_BT_EVT "cg2900_bt_evt"
+
+/** CG2900_FM_RADIO - Bluetooth HCI H4 channel for FM radio.
+ */
+#define CG2900_FM_RADIO "cg2900_fm_radio"
+
+/** CG2900_GNSS - Bluetooth HCI H4 channel for GNSS.
+ */
+#define CG2900_GNSS "cg2900_gnss"
+
+/** CG2900_DEBUG - Bluetooth HCI H4 channel for internal debug data.
+ */
+#define CG2900_DEBUG "cg2900_debug"
+
+/** CG2900_STE_TOOLS - Bluetooth HCI H4 channel for development tools data.
+ */
+#define CG2900_STE_TOOLS "cg2900_ste_tools"
+
+/** CG2900_HCI_LOGGER - BT channel for logging all transmitted H4 packets.
+ * Data read is copy of all data transferred on the other channels.
+ * Only write allowed is configuration of the HCI Logger.
+ */
+#define CG2900_HCI_LOGGER "cg2900_hci_logger"
+
+/** CG2900_BT_AUDIO - HCI Channel for BT audio configuration commands.
+ * Maps to Bluetooth command and event channels.
+ */
+#define CG2900_BT_AUDIO "cg2900_bt_audio"
+
+/** CG2900_FM_AUDIO - HCI channel for FM audio configuration commands.
+ * Maps to FM Radio channel.
+ */
+#define CG2900_FM_AUDIO "cg2900_fm_audio"
+
+/** CG2900_CORE- Channel for keeping ST-Ericsson CG2900 enabled.
+ * Opening this channel forces the chip to stay powered.
+ * No data can be written to or read from this channel.
+ */
+#define CG2900_CORE "cg2900_core"
+
+/**
+ * enum main_state - Main-state for CG2900 driver.
+ * @CG2900_INIT: CG2900 initializing.
+ * @CG2900_IDLE: No user registered to CG2900 driver.
+ * @CG2900_BOOTING: CG2900 booting after first user is registered.
+ * @CG2900_CLOSING: CG2900 closing after last user has deregistered.
+ * @CG2900_RESETING: CG2900 reset requested.
+ * @CG2900_ACTIVE: CG2900 up and running with at least one user.
+ */
+enum main_state {
+ CG2900_INIT,
+ CG2900_IDLE,
+ CG2900_BOOTING,
+ CG2900_CLOSING,
+ CG2900_RESETING,
+ CG2900_ACTIVE
+};
+
+/**
+ * enum boot_state - BOOT-state for CG2900 chip driver.
+ * @BOOT_NOT_STARTED: Boot has not yet started.
+ * @BOOT_SEND_BD_ADDRESS: VS Store In FS command with BD address
+ * has been sent.
+ * @BOOT_GET_FILES_TO_LOAD: CG2900 chip driver is retrieving file to
+ * load.
+ * @BOOT_DOWNLOAD_PATCH: CG2900 chip driver is downloading
+ * patches.
+ * @BOOT_ACTIVATE_PATCHES_AND_SETTINGS: CG2900 chip driver is activating patches
+ * and settings.
+ * @BOOT_READ_SELFTEST_RESULT: CG2900 is performing selftests that
+ * shall be read out.
+ * @BOOT_DISABLE_BT: Disable BT Core.
+ * @BOOT_READY: CG2900 chip driver boot is ready.
+ * @BOOT_FAILED: CG2900 chip driver boot failed.
+ */
+enum boot_state {
+ BOOT_NOT_STARTED,
+ BOOT_SEND_BD_ADDRESS,
+ BOOT_GET_FILES_TO_LOAD,
+ BOOT_DOWNLOAD_PATCH,
+ BOOT_ACTIVATE_PATCHES_AND_SETTINGS,
+ BOOT_READ_SELFTEST_RESULT,
+ BOOT_DISABLE_BT,
+ BOOT_READY,
+ BOOT_FAILED
+};
+
+/**
+ * enum closing_state - CLOSING-state for CG2900 chip driver.
+ * @CLOSING_RESET: HCI RESET_CMD has been sent.
+ * @CLOSING_POWER_SWITCH_OFF: HCI VS_POWER_SWITCH_OFF command has been sent.
+ * @CLOSING_SHUT_DOWN: We have now shut down the chip.
+ */
+enum closing_state {
+ CLOSING_RESET,
+ CLOSING_POWER_SWITCH_OFF,
+ CLOSING_SHUT_DOWN
+};
+
+/**
+ * enum file_load_state - BOOT_FILE_LOAD-state for CG2900 chip driver.
+ * @FILE_LOAD_GET_PATCH: Loading patches.
+ * @FILE_LOAD_GET_STATIC_SETTINGS: Loading static settings.
+ * @FILE_LOAD_NO_MORE_FILES: No more files to load.
+ * @FILE_LOAD_FAILED: File loading failed.
+ */
+enum file_load_state {
+ FILE_LOAD_GET_PATCH,
+ FILE_LOAD_GET_STATIC_SETTINGS,
+ FILE_LOAD_NO_MORE_FILES,
+ FILE_LOAD_FAILED
+};
+
+/**
+ * enum download_state - BOOT_DOWNLOAD state.
+ * @DOWNLOAD_PENDING: Download in progress.
+ * @DOWNLOAD_SUCCESS: Download successfully finished.
+ * @DOWNLOAD_FAILED: Downloading failed.
+ */
+enum download_state {
+ DOWNLOAD_PENDING,
+ DOWNLOAD_SUCCESS,
+ DOWNLOAD_FAILED
+};
+
+/**
+ * enum fm_radio_mode - FM Radio mode.
+ * It's needed because some FM do-commands generate interrupts only when
+ * the FM driver is in specific mode and we need to know if we should expect
+ * the interrupt.
+ * @FM_RADIO_MODE_IDLE: Radio mode is Idle (default).
+ * @FM_RADIO_MODE_FMT: Radio mode is set to FMT (transmitter).
+ * @FM_RADIO_MODE_FMR: Radio mode is set to FMR (receiver).
+ */
+enum fm_radio_mode {
+ FM_RADIO_MODE_IDLE = 0,
+ FM_RADIO_MODE_FMT = 1,
+ FM_RADIO_MODE_FMR = 2
+};
+
+
+/**
+ * struct cg2900_channel_item - List object for channel.
+ * @list: list_head struct.
+ * @user: User for this channel.
+ */
+struct cg2900_channel_item {
+ struct list_head list;
+ struct cg2900_user_data *user;
+};
+
+/**
+ * struct cg2900_delayed_work_struct - Work structure for CG2900 chip.
+ * @delayed_work: Work structure.
+ * @data: Pointer to private data.
+ */
+struct cg2900_delayed_work_struct {
+ struct delayed_work work;
+ void *data;
+};
+
+/**
+ * struct cg2900_skb_data - Structure for storing private data in an sk_buffer.
+ * @dev: CG2900 device for this sk_buffer.
+ */
+struct cg2900_skb_data {
+ struct cg2900_user_data *user;
+};
+#define cg2900_skb_data(__skb) ((struct cg2900_skb_data *)((__skb)->cb))
+
+/**
+ * struct cg2900_chip_info - Main info structure for CG2900 chip driver.
+ * @dev: Current device. Same as @chip_dev->dev.
+ * @patch_file_name: Stores patch file name.
+ * @settings_file_name: Stores settings file name.
+ * @file_info: Firmware file info (patch or settings).
+ * @boot_state: Current BOOT-state of CG2900 chip driver.
+ * @closing_state: Current CLOSING-state of CG2900 chip driver.
+ * @file_load_state: Current BOOT_FILE_LOAD-state of CG2900 chip
+ * driver.
+ * @download_state: Current BOOT_DOWNLOAD-state of CG2900 chip
+ * driver.
+ * @wq: CG2900 chip driver workqueue.
+ * @chip_dev: Chip handler info.
+ * @tx_bt_lock: Spinlock used to protect some global structures
+ * related to internal BT command flow control.
+ * @tx_fm_lock: Spinlock used to protect some global structures
+ * related to internal FM command flow control.
+ * @tx_fm_audio_awaiting_irpt: Indicates if an FM interrupt event related to
+ * audio driver command is expected.
+ * @fm_radio_mode: Current FM radio mode.
+ * @tx_nr_pkts_allowed_bt: Number of packets allowed to send on BT HCI CMD
+ * H4 channel.
+ * @audio_bt_cmd_op: Stores the OpCode of the last sent audio driver
+ * HCI BT CMD.
+ * @audio_fm_cmd_id: Stores the command id of the last sent
+ * HCI FM RADIO command by the fm audio user.
+ * @hci_fm_cmd_func: Stores the command function of the last sent
+ * HCI FM RADIO command by the fm radio user.
+ * @tx_queue_bt: TX queue for HCI BT commands when nr of commands
+ * allowed is 0 (CG2900 internal flow control).
+ * @tx_queue_fm: TX queue for HCI FM commands when nr of commands
+ * allowed is 0 (CG2900 internal flow control).
+ * @user_in_charge: User currently operating. Normally used at
+ * channel open and close.
+ * @last_user: Last user of this chip. To avoid complications
+ * this will never be set for bt_audio and
+ * fm_audio.
+ * @logger: Logger user of this chip.
+ * @selftest_work: Delayed work for reading selftest results.
+ * @nbr_of_polls: Number of times we should poll for selftest
+ * results.
+ */
+struct cg2900_chip_info {
+ struct device *dev;
+ char *patch_file_name;
+ char *settings_file_name;
+ struct cg2900_file_info file_info;
+ enum main_state main_state;
+ enum boot_state boot_state;
+ enum closing_state closing_state;
+ enum file_load_state file_load_state;
+ enum download_state download_state;
+ struct workqueue_struct *wq;
+ struct cg2900_chip_dev *chip_dev;
+ spinlock_t tx_bt_lock;
+ spinlock_t tx_fm_lock;
+ spinlock_t rw_lock;
+ bool tx_fm_audio_awaiting_irpt;
+ enum fm_radio_mode fm_radio_mode;
+ int tx_nr_pkts_allowed_bt;
+ u16 audio_bt_cmd_op;
+ u16 audio_fm_cmd_id;
+ u16 hci_fm_cmd_func;
+ struct sk_buff_head tx_queue_bt;
+ struct sk_buff_head tx_queue_fm;
+ struct list_head open_channels;
+ struct cg2900_user_data *user_in_charge;
+ struct cg2900_user_data *last_user;
+ struct cg2900_user_data *logger;
+ struct cg2900_user_data *bt_audio;
+ struct cg2900_user_data *fm_audio;
+ struct cg2900_delayed_work_struct selftest_work;
+ int nbr_of_polls;
+};
+
+/**
+ * struct main_info - Main info structure for CG2900 chip driver.
+ * @dev: Device structure.
+ * @cell_base_id: Base ID for MFD cells.
+ * @man_mutex: Management mutex.
+ */
+struct main_info {
+ struct device *dev;
+ int cell_base_id;
+ struct mutex man_mutex;
+};
+
+static struct main_info *main_info;
+
+/*
+ * main_wait_queue - Main Wait Queue in CG2900 driver.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(main_wait_queue);
+
+static void chip_startup_finished(struct cg2900_chip_info *info, int err);
+static void chip_shutdown(struct cg2900_user_data *user);
+
+/**
+ * bt_is_open() - Checks if any BT user is in open state.
+ * @info: CG2900 info.
+ *
+ * Returns:
+ * true if a BT channel is open.
+ * false if no BT channel is open.
+ */
+static bool bt_is_open(struct cg2900_chip_info *info)
+{
+ struct list_head *cursor;
+ struct cg2900_channel_item *tmp;
+
+ list_for_each(cursor, &info->open_channels) {
+ tmp = list_entry(cursor, struct cg2900_channel_item, list);
+ if (tmp->user->h4_channel == CHANNEL_BT_CMD)
+ return true;
+ }
+ return false;
+}
+
+/**
+ * fm_is_open() - Checks if any FM user is in open state.
+ * @info: CG2900 info.
+ *
+ * Returns:
+ * true if a FM channel is open.
+ * false if no FM channel is open.
+ */
+static bool fm_is_open(struct cg2900_chip_info *info)
+{
+ struct list_head *cursor;
+ struct cg2900_channel_item *tmp;
+
+ list_for_each(cursor, &info->open_channels) {
+ tmp = list_entry(cursor, struct cg2900_channel_item, list);
+ if (tmp->user->h4_channel == CHANNEL_FM_RADIO)
+ return true;
+ }
+ return false;
+}
+
+/**
+ * fm_irpt_expected() - check if this FM command will generate an interrupt.
+ * @cmd_id: command identifier.
+ *
+ * Returns:
+ * true if the command will generate an interrupt.
+ * false if it won't.
+ */
+static bool fm_irpt_expected(struct cg2900_chip_info *info, u16 cmd_id)
+{
+ bool retval = false;
+
+ switch (cmd_id) {
+ case CG2900_FM_DO_AIP_FADE_START:
+ if (info->fm_radio_mode == FM_RADIO_MODE_FMT)
+ retval = true;
+ break;
+
+ case CG2900_FM_DO_AUP_BT_FADE_START:
+ case CG2900_FM_DO_AUP_EXT_FADE_START:
+ case CG2900_FM_DO_AUP_FADE_START:
+ if (info->fm_radio_mode == FM_RADIO_MODE_FMR)
+ retval = true;
+ break;
+
+ case CG2900_FM_DO_FMR_SETANTENNA:
+ case CG2900_FM_DO_FMR_SP_AFSWITCH_START:
+ case CG2900_FM_DO_FMR_SP_AFUPDATE_START:
+ case CG2900_FM_DO_FMR_SP_BLOCKSCAN_START:
+ case CG2900_FM_DO_FMR_SP_PRESETPI_START:
+ case CG2900_FM_DO_FMR_SP_SCAN_START:
+ case CG2900_FM_DO_FMR_SP_SEARCH_START:
+ case CG2900_FM_DO_FMR_SP_SEARCHPI_START:
+ case CG2900_FM_DO_FMR_SP_TUNE_SETCHANNEL:
+ case CG2900_FM_DO_FMR_SP_TUNE_STEPCHANNEL:
+ case CG2900_FM_DO_FMT_PA_SETCTRL:
+ case CG2900_FM_DO_FMT_PA_SETMODE:
+ case CG2900_FM_DO_FMT_SP_TUNE_SETCHANNEL:
+ case CG2900_FM_DO_GEN_ANTENNACHECK_START:
+ case CG2900_FM_DO_GEN_GOTOMODE:
+ case CG2900_FM_DO_GEN_POWERSUPPLY_SETMODE:
+ case CG2900_FM_DO_GEN_SELECTREFERENCECLOCK:
+ case CG2900_FM_DO_GEN_SETPROCESSINGCLOCK:
+ case CG2900_FM_DO_GEN_SETREFERENCECLOCKPLL:
+ case CG2900_FM_DO_TST_TX_RAMP_START:
+ retval = true;
+ break;
+
+ default:
+ break;
+ }
+
+ if (retval)
+ dev_dbg(info->dev, "Following interrupt event expected for this"
+ " Cmd complete evt: cmd_id = 0x%X\n",
+ cmd_id);
+
+ return retval;
+}
+
+/**
+ * fm_is_do_cmd_irpt() - Check if irpt_val is one of the FM DO command related interrupts.
+ * @irpt_val: interrupt value.
+ *
+ * Returns:
+ * true if it's do-command related interrupt value.
+ * false if it's not.
+ */
+static bool fm_is_do_cmd_irpt(u16 irpt_val)
+{
+ if ((irpt_val & CG2900_FM_IRPT_OPERATION_SUCCEEDED) ||
+ (irpt_val & CG2900_FM_IRPT_OPERATION_FAILED)) {
+ dev_dbg(MAIN_DEV, "Irpt evt for FM do-command found, "
+ "irpt_val = 0x%X\n", irpt_val);
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * fm_reset_flow_ctrl - Clears up internal FM flow control.
+ *
+ * Resets outstanding commands and clear FM TX list and set CG2900 FM mode to
+ * idle.
+ */
+static void fm_reset_flow_ctrl(struct cg2900_chip_info *info)
+{
+ dev_dbg(info->dev, "fm_reset_flow_ctrl\n");
+
+ skb_queue_purge(&info->tx_queue_fm);
+
+ /* Reset the fm_cmd_id. */
+ info->audio_fm_cmd_id = CG2900_FM_CMD_NONE;
+ info->hci_fm_cmd_func = CG2900_FM_CMD_PARAM_NONE;
+
+ info->fm_radio_mode = FM_RADIO_MODE_IDLE;
+}
+
+
+/**
+ * fm_parse_cmd - Parses a FM command packet.
+ * @data: FM command packet.
+ * @cmd_func: Out: FM legacy command function.
+ * @cmd_id: Out: FM legacy command ID.
+ */
+static void fm_parse_cmd(u8 *data, u8 *cmd_func, u16 *cmd_id)
+{
+ /* Move past H4-header to start of actual package */
+ struct fm_leg_cmd *pkt = (struct fm_leg_cmd *)(data + HCI_H4_SIZE);
+
+ *cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ *cmd_id = CG2900_FM_CMD_NONE;
+
+ if (pkt->opcode != CG2900_FM_GEN_ID_LEGACY) {
+ dev_err(MAIN_DEV, "fm_parse_cmd: Not an FM legacy command "
+ "0x%02X\n", pkt->opcode);
+ return;
+ }
+
+ *cmd_func = pkt->fm_function;
+ if (*cmd_func == CG2900_FM_CMD_PARAM_WRITECOMMAND)
+ *cmd_id = cg2900_get_fm_cmd_id(le16_to_cpu(pkt->fm_cmd.head));
+}
+
+
+/**
+ * fm_parse_event - Parses a FM event packet
+ * @data: FM event packet.
+ * @event: Out: FM event.
+ * @cmd_func: Out: FM legacy command function.
+ * @cmd_id: Out: FM legacy command ID.
+ * @intr_val: Out: FM interrupt value.
+ */
+static void fm_parse_event(u8 *data, u8 *event, u8 *cmd_func, u16 *cmd_id,
+ u16 *intr_val)
+{
+ /* Move past H4-header to start of actual package */
+ union fm_leg_evt_or_irq *pkt = (union fm_leg_evt_or_irq *)data;
+
+ *cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ *cmd_id = CG2900_FM_CMD_NONE;
+ *intr_val = 0;
+ *event = CG2900_FM_EVENT_UNKNOWN;
+
+ if (pkt->evt.opcode == CG2900_FM_GEN_ID_LEGACY &&
+ pkt->evt.read_write == CG2900_FM_CMD_LEG_PARAM_WRITE) {
+ /* Command complete */
+ *event = CG2900_FM_EVENT_CMD_COMPLETE;
+ *cmd_func = pkt->evt.fm_function;
+ if (*cmd_func == CG2900_FM_CMD_PARAM_WRITECOMMAND)
+ *cmd_id = cg2900_get_fm_cmd_id(
+ le16_to_cpu(pkt->evt.response_head));
+ } else if (pkt->irq_v2.opcode == CG2900_FM_GEN_ID_LEGACY &&
+ pkt->irq_v2.event_type == CG2900_FM_CMD_LEG_PARAM_IRQ) {
+ /* Interrupt, PG2 style */
+ *event = CG2900_FM_EVENT_INTERRUPT;
+ *intr_val = le16_to_cpu(pkt->irq_v2.irq);
+ } else if (pkt->irq_v1.opcode == CG2900_FM_GEN_ID_LEGACY) {
+ /* Interrupt, PG1 style */
+ *event = CG2900_FM_EVENT_INTERRUPT;
+ *intr_val = le16_to_cpu(pkt->irq_v1.irq);
+ } else
+ dev_err(MAIN_DEV, "fm_parse_event: Not an FM legacy command "
+ "0x%X %X %X %X\n", data[0], data[1], data[2], data[3]);
+}
+
+/**
+ * fm_update_mode - Updates the FM mode state machine.
+ * @data: FM command packet.
+ *
+ * Parses a FM command packet and updates the FM mode state machine.
+ */
+static void fm_update_mode(struct cg2900_chip_info *info, u8 *data)
+{
+ u8 cmd_func;
+ u16 cmd_id;
+
+ fm_parse_cmd(data, &cmd_func, &cmd_id);
+
+ if (cmd_func == CG2900_FM_CMD_PARAM_WRITECOMMAND &&
+ cmd_id == CG2900_FM_DO_GEN_GOTOMODE) {
+ /* Move past H4-header to start of actual package */
+ struct fm_leg_cmd *pkt =
+ (struct fm_leg_cmd *)(data + HCI_H4_SIZE);
+
+ info->fm_radio_mode = le16_to_cpu(pkt->fm_cmd.data[0]);
+ dev_dbg(info->dev, "FM Radio mode changed to %d\n",
+ info->fm_radio_mode);
+ }
+}
+
+
+/**
+ * transmit_skb_from_tx_queue_bt() - Check flow control info and transmit skb.
+ *
+ * The transmit_skb_from_tx_queue_bt() function checks if there are tickets
+ * available and commands waiting in the TX queue and if so transmits them
+ * to the controller.
+ * It shall always be called within spinlock_bh.
+ */
+static void transmit_skb_from_tx_queue_bt(struct cg2900_chip_dev *dev)
+{
+ struct cg2900_user_data *user;
+ struct cg2900_chip_info *info = dev->c_data;
+ struct sk_buff *skb;
+
+ dev_dbg(dev->dev, "transmit_skb_from_tx_queue_bt\n");
+
+ /* Dequeue an skb from the head of the list */
+ skb = skb_dequeue(&info->tx_queue_bt);
+ while (skb) {
+ if (info->tx_nr_pkts_allowed_bt <= 0) {
+ /*
+ * If no more packets allowed just return, we'll get
+ * back here after next Command Complete/Status event.
+ * Put skb back at head of queue.
+ */
+ skb_queue_head(&info->tx_queue_bt, skb);
+ return;
+ }
+
+ (info->tx_nr_pkts_allowed_bt)--;
+ dev_dbg(dev->dev, "tx_nr_pkts_allowed_bt = %d\n",
+ info->tx_nr_pkts_allowed_bt);
+
+ user = cg2900_skb_data(skb)->user; /* user is never NULL */
+
+ /*
+ * If it's a command from audio application, store the OpCode,
+ * it'll be used later to decide where to dispatch
+ * the Command Complete event.
+ */
+ if (info->bt_audio == user) {
+ struct hci_command_hdr *hdr = (struct hci_command_hdr *)
+ (skb->data + HCI_H4_SIZE);
+
+ info->audio_bt_cmd_op = le16_to_cpu(hdr->opcode);
+ dev_dbg(user->dev,
+ "Sending cmd from audio driver, saving "
+ "OpCode = 0x%04X\n", info->audio_bt_cmd_op);
+ }
+
+ cg2900_tx_to_chip(user, info->logger, skb);
+
+ /* Dequeue an skb from the head of the list */
+ skb = skb_dequeue(&info->tx_queue_bt);
+ }
+}
+
+/**
+ * transmit_skb_from_tx_queue_fm() - Check flow control info and transmit skb.
+ *
+ * The transmit_skb_from_tx_queue_fm() function checks if it possible to
+ * transmit and commands waiting in the TX queue and if so transmits them
+ * to the controller.
+ * It shall always be called within spinlock_bh.
+ */
+static void transmit_skb_from_tx_queue_fm(struct cg2900_chip_dev *dev)
+{
+ struct cg2900_user_data *user;
+ struct cg2900_chip_info *info = dev->c_data;
+ struct sk_buff *skb;
+
+ dev_dbg(dev->dev, "transmit_skb_from_tx_queue_fm\n");
+
+ /* Dequeue an skb from the head of the list */
+ skb = skb_dequeue(&info->tx_queue_fm);
+ while (skb) {
+ u16 cmd_id;
+ u8 cmd_func;
+
+ if (info->audio_fm_cmd_id != CG2900_FM_CMD_NONE ||
+ info->hci_fm_cmd_func != CG2900_FM_CMD_PARAM_NONE) {
+ /*
+ * There are currently outstanding FM commands.
+ * Wait for them to finish. We will get back here later.
+ * Queue back the skb at head of list.
+ */
+ skb_queue_head(&info->tx_queue_bt, skb);
+ return;
+ }
+
+ user = cg2900_skb_data(skb)->user; /* user is never NULL */
+
+ if (!user->opened) {
+ /*
+ * Channel is not open. That means that the user that
+ * originally sent it has deregistered.
+ * Just throw it away and check the next skb in the
+ * queue.
+ */
+ kfree_skb(skb);
+ /* Dequeue an skb from the head of the list */
+ skb = skb_dequeue(&info->tx_queue_fm);
+ continue;
+ }
+
+ fm_parse_cmd(&(skb->data[0]), &cmd_func, &cmd_id);
+
+ /*
+ * Store the FM command function , it'll be used later to decide
+ * where to dispatch the Command Complete event.
+ */
+ if (info->fm_audio == user) {
+ info->audio_fm_cmd_id = cmd_id;
+ dev_dbg(user->dev, "Sending FM audio cmd 0x%04X\n",
+ info->audio_fm_cmd_id);
+ } else {
+ /* FM radio command */
+ info->hci_fm_cmd_func = cmd_func;
+ fm_update_mode(info, &skb->data[0]);
+ dev_dbg(user->dev, "Sending FM radio cmd 0x%04X\n",
+ info->hci_fm_cmd_func);
+ }
+
+ /*
+ * We have only one ticket on FM. Just return after
+ * sending the skb.
+ */
+ cg2900_tx_to_chip(user, info->logger, skb);
+ return;
+ }
+}
+
+/**
+ * update_flow_ctrl_bt() - Update number of outstanding commands for BT CMD.
+ * @dev: Current chip device.
+ * @skb: skb with received packet.
+ *
+ * The update_flow_ctrl_bt() checks if incoming data packet is
+ * BT Command Complete/Command Status Event and if so updates number of tickets
+ * and number of outstanding commands. It also calls function to send queued
+ * commands (if the list of queued commands is not empty).
+ */
+static void update_flow_ctrl_bt(struct cg2900_chip_dev *dev,
+ const struct sk_buff * const skb)
+{
+ u8 *data = skb->data;
+ struct hci_event_hdr *event;
+ struct cg2900_chip_info *info = dev->c_data;
+
+ event = (struct hci_event_hdr *)data;
+ data += sizeof(*event);
+
+ if (HCI_EV_CMD_COMPLETE == event->evt) {
+ struct hci_ev_cmd_complete *complete;
+ complete = (struct hci_ev_cmd_complete *)data;
+
+ /*
+ * If it's HCI Command Complete Event then we might get some
+ * HCI tickets back. Also we can decrease the number outstanding
+ * HCI commands (if it's not NOP command or one of the commands
+ * that generate both Command Status Event and Command Complete
+ * Event).
+ * Check if we have any HCI commands waiting in the TX list and
+ * send them if there are tickets available.
+ */
+ spin_lock_bh(&info->tx_bt_lock);
+ info->tx_nr_pkts_allowed_bt = complete->ncmd;
+ dev_dbg(dev->dev, "New tx_nr_pkts_allowed_bt = %d\n",
+ info->tx_nr_pkts_allowed_bt);
+
+ if (!skb_queue_empty(&info->tx_queue_bt))
+ transmit_skb_from_tx_queue_bt(dev);
+ spin_unlock_bh(&info->tx_bt_lock);
+ } else if (HCI_EV_CMD_STATUS == event->evt) {
+ struct hci_ev_cmd_status *status;
+ status = (struct hci_ev_cmd_status *)data;
+
+ /*
+ * If it's HCI Command Status Event then we might get some
+ * HCI tickets back. Also we can decrease the number outstanding
+ * HCI commands (if it's not NOP command).
+ * Check if we have any HCI commands waiting in the TX queue and
+ * send them if there are tickets available.
+ */
+ spin_lock_bh(&info->tx_bt_lock);
+ info->tx_nr_pkts_allowed_bt = status->ncmd;
+ dev_dbg(dev->dev, "New tx_nr_pkts_allowed_bt = %d\n",
+ info->tx_nr_pkts_allowed_bt);
+
+ if (!skb_queue_empty(&info->tx_queue_bt))
+ transmit_skb_from_tx_queue_bt(dev);
+ spin_unlock_bh(&info->tx_bt_lock);
+ }
+}
+
+/**
+ * update_flow_ctrl_fm() - Update packets allowed for FM channel.
+ * @dev: Current chip device.
+ * @skb: skb with received packet.
+ *
+ * The update_flow_ctrl_fm() checks if incoming data packet is FM packet
+ * indicating that the previous command has been handled and if so update
+ * packets. It also calls function to send queued commands (if the list of
+ * queued commands is not empty).
+ */
+static void update_flow_ctrl_fm(struct cg2900_chip_dev *dev,
+ const struct sk_buff * const skb)
+{
+ u8 cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ u16 cmd_id = CG2900_FM_CMD_NONE;
+ u16 irpt_val = 0;
+ u8 event = CG2900_FM_EVENT_UNKNOWN;
+ struct cg2900_chip_info *info = dev->c_data;
+
+ fm_parse_event(&(skb->data[0]), &event, &cmd_func, &cmd_id, &irpt_val);
+
+ if (event == CG2900_FM_EVENT_CMD_COMPLETE) {
+ /* FM legacy command complete event */
+ spin_lock_bh(&info->tx_fm_lock);
+ /*
+ * Check if it's not an write command complete event, because
+ * then it cannot be a DO command.
+ * If it's a write command complete event check that is not a
+ * DO command complete event before setting the outstanding
+ * FM packets to none.
+ */
+ if (cmd_func != CG2900_FM_CMD_PARAM_WRITECOMMAND ||
+ !fm_irpt_expected(info, cmd_id)) {
+ info->hci_fm_cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ info->audio_fm_cmd_id = CG2900_FM_CMD_NONE;
+ dev_dbg(dev->dev,
+ "FM_Write: Outstanding FM commands:\n"
+ "\tRadio: 0x%04X\n"
+ "\tAudio: 0x%04X\n",
+ info->hci_fm_cmd_func,
+ info->audio_fm_cmd_id);
+ transmit_skb_from_tx_queue_fm(dev);
+
+ /*
+ * If there was a write do command complete event check if it is
+ * DO command previously sent by the FM audio user. If that's
+ * the case we need remember that in order to be able to
+ * dispatch the interrupt to the correct user.
+ */
+ } else if (cmd_id == info->audio_fm_cmd_id) {
+ info->tx_fm_audio_awaiting_irpt = true;
+ dev_dbg(dev->dev,
+ "FM Audio waiting for interrupt = true\n");
+ }
+ spin_unlock_bh(&info->tx_fm_lock);
+ } else if (event == CG2900_FM_EVENT_INTERRUPT) {
+ /* FM legacy interrupt */
+ if (fm_is_do_cmd_irpt(irpt_val)) {
+ /*
+ * If it is an interrupt related to a DO command update
+ * the outstanding flow control and transmit blocked
+ * FM commands.
+ */
+ spin_lock_bh(&info->tx_fm_lock);
+ info->hci_fm_cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ info->audio_fm_cmd_id = CG2900_FM_CMD_NONE;
+ dev_dbg(dev->dev,
+ "FM_INT: Outstanding FM commands:\n"
+ "\tRadio: 0x%04X\n"
+ "\tAudio: 0x%04X\n",
+ info->hci_fm_cmd_func,
+ info->audio_fm_cmd_id);
+ info->tx_fm_audio_awaiting_irpt = false;
+ dev_dbg(dev->dev,
+ "FM Audio waiting for interrupt = false\n");
+ transmit_skb_from_tx_queue_fm(dev);
+ spin_unlock_bh(&info->tx_fm_lock);
+ }
+ }
+}
+
+/**
+ * send_bt_enable() - Send HCI VS BT Enable command to the chip.
+ * @info: Chip info structure.
+ * @bt_enable: Value for BT Enable parameter (e.g. CG2900_BT_DISABLE).
+ */
+static void send_bt_enable(struct cg2900_chip_info *info, u8 bt_enable)
+{
+ struct bt_vs_bt_enable_cmd cmd;
+
+ cmd.op_code = cpu_to_le16(CG2900_BT_OP_VS_BT_ENABLE);
+ cmd.plen = BT_PARAM_LEN(sizeof(cmd));
+ cmd.enable = bt_enable;
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger,
+ &cmd, sizeof(cmd));
+}
+
+/**
+ * send_bd_address() - Send HCI VS command with BD address to the chip.
+ */
+static void send_bd_address(struct cg2900_chip_info *info)
+{
+ struct bt_vs_store_in_fs_cmd *cmd;
+ u8 plen = sizeof(*cmd) + BT_BDADDR_SIZE;
+
+ cmd = kmalloc(plen, GFP_KERNEL);
+ if (!cmd) {
+ dev_err(info->dev, "send_bd_address could not allocate cmd\n");
+ return;
+ }
+
+ cmd->opcode = cpu_to_le16(CG2900_BT_OP_VS_STORE_IN_FS);
+ cmd->plen = BT_PARAM_LEN(plen);
+ cmd->user_id = CG2900_VS_STORE_IN_FS_USR_ID_BD_ADDR;
+ cmd->len = BT_BDADDR_SIZE;
+ /* Now copy the BD address received from user space control app. */
+ memcpy(cmd->data, bd_address, BT_BDADDR_SIZE);
+
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_SEND_BD_ADDRESS\n");
+ info->boot_state = BOOT_SEND_BD_ADDRESS;
+
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger, cmd, plen);
+
+ kfree(cmd);
+}
+
+/**
+ * send_settings_file() - Transmit settings file.
+ *
+ * The send_settings_file() function transmit settings file.
+ * The file is read in parts to fit in HCI packets. When finished,
+ * close the settings file and send HCI reset to activate settings and patches.
+ */
+static void send_settings_file(struct cg2900_chip_info *info)
+{
+ int bytes_sent;
+
+ bytes_sent = cg2900_read_and_send_file_part(info->user_in_charge,
+ info->logger,
+ &info->file_info);
+ if (bytes_sent > 0) {
+ /* Data sent. Wait for CmdComplete */
+ return;
+ } else if (bytes_sent < 0) {
+ dev_err(BOOT_DEV, "send_settings_file: Error %d occurred\n",
+ bytes_sent);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, bytes_sent);
+ return;
+ }
+
+ /* No data was sent. This file is finished */
+ info->download_state = DOWNLOAD_SUCCESS;
+
+ /* Settings file finished. Release used resources */
+ dev_dbg(BOOT_DEV, "Settings file finished, release used resources\n");
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+
+ dev_dbg(BOOT_DEV, "New file_load_state: FILE_LOAD_NO_MORE_FILES\n");
+ info->file_load_state = FILE_LOAD_NO_MORE_FILES;
+
+ /* Create and send HCI VS Store In FS command with bd address. */
+ send_bd_address(info);
+}
+
+/**
+ * send_patch_file - Transmit patch file.
+ *
+ * The send_patch_file() function transmit patch file.
+ * The file is read in parts to fit in HCI packets. When the complete file is
+ * transmitted, the file is closed.
+ * When finished, continue with settings file.
+ */
+static void send_patch_file(struct cg2900_chip_dev *dev)
+{
+ int err;
+ int bytes_sent;
+ struct cg2900_chip_info *info = dev->c_data;
+ int file_name_size = strlen("CG2900_XXXX_XXXX_settings.fw");
+
+ bytes_sent = cg2900_read_and_send_file_part(info->user_in_charge,
+ info->logger,
+ &info->file_info);
+ if (bytes_sent > 0) {
+ /* Data sent. Wait for CmdComplete */
+ return;
+ } else if (bytes_sent < 0) {
+ dev_err(BOOT_DEV, "send_patch_file: Error %d occurred\n",
+ bytes_sent);
+ err = bytes_sent;
+ goto error_handling;
+ }
+
+ /* No data was sent. This file is finished */
+ info->download_state = DOWNLOAD_SUCCESS;
+
+ dev_dbg(BOOT_DEV, "Patch file finished, release used resources\n");
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+
+ /*
+ * Create the settings file name from HCI revision and sub_version.
+ * file_name_size does not include terminating NULL character
+ * so add 1.
+ */
+ err = snprintf(info->settings_file_name, file_name_size + 1,
+ "CG2900_%04X_%04X_settings.fw", dev->chip.hci_revision,
+ dev->chip.hci_sub_version);
+ if (err == file_name_size) {
+ dev_dbg(BOOT_DEV, "Downloading settings file %s\n",
+ info->settings_file_name);
+ } else {
+ dev_err(BOOT_DEV, "Settings file name failed! err=%d\n", err);
+ goto error_handling;
+ }
+
+ /* Retrieve the settings file */
+ err = request_firmware(&info->file_info.fw_file,
+ info->settings_file_name,
+ info->dev);
+ if (err) {
+ dev_err(BOOT_DEV, "Couldn't get settings file (%d)\n", err);
+ goto error_handling;
+ }
+ /* Now send the settings file */
+ dev_dbg(BOOT_DEV,
+ "New file_load_state: FILE_LOAD_GET_STATIC_SETTINGS\n");
+ info->file_load_state = FILE_LOAD_GET_STATIC_SETTINGS;
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_PENDING\n");
+ info->download_state = DOWNLOAD_PENDING;
+ send_settings_file(info);
+ return;
+
+error_handling:
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, err);
+}
+
+/**
+ * work_power_off_chip() - Work item to power off the chip.
+ * @work: Reference to work data.
+ *
+ * The work_power_off_chip() function handles transmission of the HCI command
+ * vs_power_switch_off and then informs the CG2900 Core that this chip driver is
+ * finished and the Core driver can now shut off the chip.
+ */
+static void work_power_off_chip(struct work_struct *work)
+{
+ struct sk_buff *skb = NULL;
+ u8 *h4_header;
+ struct cg2900_platform_data *pf_data;
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ if (!work) {
+ dev_err(MAIN_DEV, "work_power_off_chip: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ /*
+ * Get the VS Power Switch Off command to use based on connected
+ * connectivity controller
+ */
+ pf_data = dev_get_platdata(dev->dev);
+ if (pf_data->get_power_switch_off_cmd)
+ skb = pf_data->get_power_switch_off_cmd(dev, NULL);
+
+ /*
+ * Transmit the received command.
+ * If no command found for the device, just continue
+ */
+ if (!skb) {
+ dev_err(dev->dev,
+ "Could not retrieve PowerSwitchOff command\n");
+ goto shut_down_chip;
+ }
+
+ dev_dbg(dev->dev,
+ "Got power_switch_off command. Add H4 header and transmit\n");
+
+ /*
+ * Move the data pointer to the H:4 header position and store
+ * the H4 header
+ */
+ h4_header = skb_push(skb, CG2900_SKB_RESERVE);
+ *h4_header = CHANNEL_BT_CMD;
+
+ dev_dbg(dev->dev, "New closing_state: CLOSING_POWER_SWITCH_OFF\n");
+ info->closing_state = CLOSING_POWER_SWITCH_OFF;
+
+ if (info->user_in_charge)
+ cg2900_tx_to_chip(info->user_in_charge, info->logger, skb);
+ else
+ cg2900_tx_no_user(dev, skb);
+
+ /*
+ * Mandatory to wait 500ms after the power_switch_off command has been
+ * transmitted, in order to make sure that the controller is ready.
+ */
+ schedule_timeout_killable(msecs_to_jiffies(POWER_SW_OFF_WAIT));
+
+shut_down_chip:
+ dev_dbg(dev->dev, "New closing_state: CLOSING_SHUT_DOWN\n");
+ info->closing_state = CLOSING_SHUT_DOWN;
+
+ /* Close the transport, which will power off the chip */
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ /* Chip shut-down finished, set correct state and wake up the chip. */
+ dev_dbg(dev->dev, "New main_state: CG2900_IDLE\n");
+ info->main_state = CG2900_IDLE;
+ wake_up_all(&main_wait_queue);
+
+ kfree(my_work);
+}
+
+/**
+ * work_chip_shutdown() - Shut down the chip.
+ * @work: Reference to work data.
+ */
+static void work_chip_shutdown(struct work_struct *work)
+{
+ struct cg2900_work *my_work;
+ struct cg2900_user_data *user;
+
+ if (!work) {
+ dev_err(MAIN_DEV, "work_chip_shutdown: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ user = my_work->user_data;
+
+ chip_shutdown(user);
+
+ kfree(my_work);
+}
+
+/**
+ * work_reset_after_error() - Handle reset.
+ * @work: Reference to work data.
+ *
+ * Handle a reset after received Command Complete event.
+ */
+static void work_reset_after_error(struct work_struct *work)
+{
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ if (!work) {
+ dev_err(MAIN_DEV, "work_reset_after_error: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ chip_startup_finished(info, -EIO);
+
+ kfree(my_work);
+}
+
+/**
+ * work_load_patch_and_settings() - Start loading patches and settings.
+ * @work: Reference to work data.
+ */
+static void work_load_patch_and_settings(struct work_struct *work)
+{
+ int err = 0;
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+ int file_name_size = strlen("CG2900_XXXX_XXXX_patch.fw");
+
+ if (!work) {
+ dev_err(MAIN_DEV,
+ "work_load_patch_and_settings: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ /* Check that we are in the right state */
+ if (info->boot_state != BOOT_GET_FILES_TO_LOAD)
+ goto finished;
+
+ /*
+ * Create the patch file name from HCI revision and sub_version.
+ * file_name_size does not include terminating NULL character
+ * so add 1.
+ */
+ err = snprintf(info->patch_file_name, file_name_size + 1,
+ "CG2900_%04X_%04X_patch.fw", dev->chip.hci_revision,
+ dev->chip.hci_sub_version);
+ if (err == file_name_size) {
+ dev_dbg(BOOT_DEV, "Downloading patch file %s\n",
+ info->patch_file_name);
+ } else {
+ dev_err(BOOT_DEV, "Patch file name failed! err=%d\n", err);
+ goto error_handling;
+ }
+
+ /* We now all info needed */
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_DOWNLOAD_PATCH\n");
+ info->boot_state = BOOT_DOWNLOAD_PATCH;
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_PENDING\n");
+ info->download_state = DOWNLOAD_PENDING;
+ dev_dbg(BOOT_DEV, "New file_load_state: FILE_LOAD_GET_PATCH\n");
+ info->file_load_state = FILE_LOAD_GET_PATCH;
+ info->file_info.chunk_id = 0;
+ info->file_info.file_offset = 0;
+ info->file_info.fw_file = NULL;
+
+ /* OK. Now it is time to download the patches */
+ err = request_firmware(&(info->file_info.fw_file),
+ info->patch_file_name,
+ dev->dev);
+ if (err < 0) {
+ dev_err(BOOT_DEV, "Couldn't get patch file (%d)\n", err);
+ goto error_handling;
+ }
+ send_patch_file(dev);
+
+ goto finished;
+
+error_handling:
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, -EIO);
+finished:
+ kfree(my_work);
+}
+
+/**
+ * work_cont_file_download() - A file block has been written.
+ * @work: Reference to work data.
+ *
+ * Handle a received HCI VS Write File Block Complete event.
+ * Normally this means continue to send files to the controller.
+ */
+static void work_cont_file_download(struct work_struct *work)
+{
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ if (!work) {
+ dev_err(MAIN_DEV, "work_cont_file_download: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ /* Continue to send patches or settings to the controller */
+ if (info->file_load_state == FILE_LOAD_GET_PATCH)
+ send_patch_file(dev);
+ else if (info->file_load_state == FILE_LOAD_GET_STATIC_SETTINGS)
+ send_settings_file(info);
+ else
+ dev_dbg(BOOT_DEV, "No more files to load\n");
+
+ kfree(my_work);
+}
+
+/**
+ * work_send_read_selftest_cmd() - HCI VS Read_SelfTests_Result command shall be sent.
+ * @work: Reference to work data.
+ */
+static void work_send_read_selftest_cmd(struct work_struct *work)
+{
+ struct delayed_work *del_work;
+ struct cg2900_delayed_work_struct *current_work;
+ struct cg2900_chip_info *info;
+ struct hci_command_hdr cmd;
+
+ if (!work) {
+ dev_err(MAIN_DEV,
+ "work_send_read_selftest_cmd: work == NULL\n");
+ return;
+ }
+
+ del_work = to_delayed_work(work);
+ current_work = container_of(del_work,
+ struct cg2900_delayed_work_struct, work);
+ info = current_work->data;
+
+ if (info->boot_state != BOOT_READ_SELFTEST_RESULT)
+ return;
+
+ cmd.opcode = cpu_to_le16(CG2900_BT_OP_VS_READ_SELTESTS_RESULT);
+ cmd.plen = 0; /* No parameters for Read Selftests Result */
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger, &cmd,
+ sizeof(cmd));
+}
+
+/**
+ * handle_reset_cmd_complete() - Handles HCI Reset Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_reset_cmd_complete(struct cg2900_chip_dev *dev, u8 *data)
+{
+ u8 status = data[0];
+ struct cg2900_chip_info *info = dev->c_data;
+
+ dev_dbg(BOOT_DEV, "Received Reset complete event with status 0x%X\n",
+ status);
+
+ if (CG2900_CLOSING != info->main_state &&
+ CLOSING_RESET != info->closing_state)
+ return false;
+
+ if (HCI_BT_ERROR_NO_ERROR != status) {
+ /*
+ * Continue in case of error, the chip is going to be shut down
+ * anyway.
+ */
+ dev_err(BOOT_DEV, "Command complete for HciReset received with "
+ "error 0x%X\n", status);
+ }
+
+ cg2900_create_work_item(info->wq, work_power_off_chip, dev);
+
+ return true;
+}
+
+/**
+ * handle_vs_store_in_fs_cmd_complete() - Handles HCI VS StoreInFS Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_store_in_fs_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct cg2900_chip_info *info = dev->c_data;
+
+ dev_dbg(BOOT_DEV,
+ "Received Store_in_FS complete event with status 0x%X\n",
+ status);
+
+ if (info->boot_state != BOOT_SEND_BD_ADDRESS)
+ return false;
+
+ if (HCI_BT_ERROR_NO_ERROR == status) {
+ struct hci_command_hdr cmd;
+
+ /* Send HCI SystemReset command to activate patches */
+ dev_dbg(BOOT_DEV,
+ "New boot_state: BOOT_ACTIVATE_PATCHES_AND_SETTINGS\n");
+ info->boot_state = BOOT_ACTIVATE_PATCHES_AND_SETTINGS;
+
+ cmd.opcode = cpu_to_le16(CG2900_BT_OP_VS_SYSTEM_RESET);
+ cmd.plen = 0; /* No parameters for System Reset */
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger, &cmd,
+ sizeof(cmd));
+ } else {
+ dev_err(BOOT_DEV,
+ "Command complete for StoreInFS received with error "
+ "0x%X\n", status);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_write_file_block_cmd_complete() - Handles HCI VS WriteFileBlock Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_write_file_block_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_DOWNLOAD_PATCH ||
+ info->download_state != DOWNLOAD_PENDING)
+ return false;
+
+ if (HCI_BT_ERROR_NO_ERROR == status)
+ cg2900_create_work_item(info->wq, work_cont_file_download, dev);
+ else {
+ dev_err(BOOT_DEV,
+ "Command complete for WriteFileBlock received with"
+ " error 0x%X\n", status);
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_FAILED\n");
+ info->download_state = DOWNLOAD_FAILED;
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ if (info->file_info.fw_file) {
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+ }
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_write_file_block_cmd_status() - Handles HCI VS WriteFileBlock Command Status event.
+ * @status: Returned status of WriteFileBlock command.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_write_file_block_cmd_status(struct cg2900_chip_dev *dev,
+ u8 status)
+{
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_DOWNLOAD_PATCH ||
+ info->download_state != DOWNLOAD_PENDING)
+ return false;
+
+ /*
+ * Only do something if there is an error. Otherwise we will wait for
+ * CmdComplete.
+ */
+ if (HCI_BT_ERROR_NO_ERROR != status) {
+ dev_err(BOOT_DEV,
+ "Command status for WriteFileBlock received with"
+ " error 0x%X\n", status);
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_FAILED\n");
+ info->download_state = DOWNLOAD_FAILED;
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ if (info->file_info.fw_file) {
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+ }
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_power_switch_off_cmd_complete() - Handles HCI VS PowerSwitchOff Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_power_switch_off_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (CLOSING_POWER_SWITCH_OFF != info->closing_state)
+ return false;
+
+ dev_dbg(BOOT_DEV,
+ "handle_vs_power_switch_off_cmd_complete status %d\n", status);
+
+ /*
+ * We were waiting for this but we don't need to do anything upon
+ * reception except warn for error status
+ */
+ if (HCI_BT_ERROR_NO_ERROR != status)
+ dev_err(BOOT_DEV,
+ "Command Complete for PowerSwitchOff received with "
+ "error 0x%X", status);
+
+ return true;
+}
+
+/**
+ * handle_vs_system_reset_cmd_complete() - Handle HCI VS SystemReset Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_system_reset_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_ACTIVATE_PATCHES_AND_SETTINGS)
+ return false;
+
+ dev_dbg(BOOT_DEV, "handle_vs_system_reset_cmd_complete status %d\n",
+ status);
+
+ if (HCI_BT_ERROR_NO_ERROR == status) {
+ if (dev->chip.hci_revision == CG2900_PG2_REV) {
+ /*
+ * We must now wait for the selftest results. They will
+ * take a certain amount of time to finish so start a
+ * delayed work that will then send the command.
+ */
+ dev_dbg(BOOT_DEV,
+ "New boot_state: BOOT_READ_SELFTEST_RESULT\n");
+ info->boot_state = BOOT_READ_SELFTEST_RESULT;
+ queue_delayed_work(info->wq, &info->selftest_work.work,
+ msecs_to_jiffies(SELFTEST_INITIAL));
+ info->nbr_of_polls = 0;
+ } else {
+ /*
+ * We are now almost finished. Shut off BT Core. It will
+ * be re-enabled by the Bluetooth driver when needed.
+ */
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_DISABLE_BT\n");
+ info->boot_state = BOOT_DISABLE_BT;
+ send_bt_enable(info, CG2900_BT_DISABLE);
+ }
+ } else {
+ dev_err(BOOT_DEV,
+ "Received Reset complete event with status 0x%X\n",
+ status);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, -EIO);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_read_selftests_cmd_complete() - Handle HCI VS ReadSelfTestsResult Command Complete event.
+ * @dev: Current chip.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_read_selftests_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ struct bt_vs_read_selftests_result_evt *evt =
+ (struct bt_vs_read_selftests_result_evt *)data;
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_READ_SELFTEST_RESULT)
+ return false;
+
+ dev_dbg(BOOT_DEV,
+ "handle_vs_read_selftests_cmd_complete status %d result %d\n",
+ evt->status, evt->result);
+
+ if (HCI_BT_ERROR_NO_ERROR != evt->status)
+ goto err_handling;
+
+ if (CG2900_BT_SELFTEST_SUCCESSFUL == evt->result ||
+ CG2900_BT_SELFTEST_FAILED == evt->result) {
+ if (CG2900_BT_SELFTEST_FAILED == evt->result)
+ dev_err(BOOT_DEV, "CG2900 self test failed\n");
+
+ /*
+ * We are now almost finished. Shut off BT Core. It will
+ * be re-enabled by the Bluetooth driver when needed.
+ */
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_DISABLE_BT\n");
+ info->boot_state = BOOT_DISABLE_BT;
+ send_bt_enable(info, CG2900_BT_DISABLE);
+ return true;
+ } else if (CG2900_BT_SELFTEST_NOT_COMPLETED == evt->result) {
+ /*
+ * Self tests are not yet finished. Wait some more time
+ * before resending the command
+ */
+ if (info->nbr_of_polls > MAX_NBR_OF_POLLS) {
+ dev_err(BOOT_DEV, "Selftest results reached max"
+ " number of polls\n");
+ goto err_handling;
+ }
+ queue_delayed_work(info->wq, &info->selftest_work.work,
+ msecs_to_jiffies(SELFTEST_POLLING));
+ info->nbr_of_polls++;
+ return true;
+ }
+
+err_handling:
+ dev_err(BOOT_DEV,
+ "Received Read SelfTests Result complete event with "
+ "status 0x%X and result 0x%X\n",
+ evt->status, evt->result);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, -EIO);
+ return true;
+}
+
+/**
+ * handle_vs_bt_enable_cmd_status() - Handles HCI VS BtEnable Command Status event.
+ * @status: Returned status of BtEnable command.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_bt_enable_cmd_status(struct cg2900_chip_dev *dev,
+ u8 status)
+{
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_DISABLE_BT)
+ return false;
+
+ dev_dbg(BOOT_DEV, "handle_vs_bt_enable_cmd_status status %d\n", status);
+
+ /*
+ * Only do something if there is an error. Otherwise we will wait for
+ * CmdComplete.
+ */
+ if (HCI_BT_ERROR_NO_ERROR != status) {
+ dev_err(BOOT_DEV,
+ "Received BtEnable status event with status 0x%X\n",
+ status);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, -EIO);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_bt_enable_cmd_complete() - Handle HCI VS BtEnable Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_bt_enable_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_DISABLE_BT)
+ return false;
+
+ dev_dbg(BOOT_DEV, "handle_vs_bt_enable_cmd_complete status %d\n",
+ status);
+
+ if (HCI_BT_ERROR_NO_ERROR == status) {
+ /*
+ * The boot sequence is now finished successfully.
+ * Set states and signal to waiting thread.
+ */
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_READY\n");
+ info->boot_state = BOOT_READY;
+ chip_startup_finished(info, 0);
+ } else {
+ dev_err(BOOT_DEV,
+ "Received BtEnable complete event with status 0x%X\n",
+ status);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, -EIO);
+ }
+
+ return true;
+}
+
+/**
+ * handle_rx_data_bt_evt() - Check if received data should be handled in CG2900 chip driver.
+ * @skb: Data packet
+ *
+ * The handle_rx_data_bt_evt() function checks if received data should be
+ * handled in CG2900 chip driver. If so handle it correctly.
+ * Received data is always HCI BT Event.
+ *
+ * Returns:
+ * True, if packet was handled internally,
+ * False, otherwise.
+ */
+static bool handle_rx_data_bt_evt(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb)
+{
+ bool pkt_handled = false;
+ /* skb cannot be NULL here so it is safe to de-reference */
+ u8 *data = skb->data;
+ struct hci_event_hdr *evt;
+ u16 op_code;
+
+ evt = (struct hci_event_hdr *)data;
+ data += sizeof(*evt);
+
+ /* First check the event code. */
+ if (HCI_EV_CMD_COMPLETE == evt->evt) {
+ struct hci_ev_cmd_complete *cmd_complete;
+
+ cmd_complete = (struct hci_ev_cmd_complete *)data;
+ op_code = le16_to_cpu(cmd_complete->opcode);
+ dev_dbg(dev->dev,
+ "Received Command Complete: op_code = 0x%04X\n",
+ op_code);
+ /* Move to first byte after OCF */
+ data += sizeof(*cmd_complete);
+
+ if (op_code == HCI_OP_RESET)
+ pkt_handled = handle_reset_cmd_complete(dev, data);
+ else if (op_code == CG2900_BT_OP_VS_STORE_IN_FS)
+ pkt_handled = handle_vs_store_in_fs_cmd_complete(dev,
+ data);
+ else if (op_code == CG2900_BT_OP_VS_WRITE_FILE_BLOCK)
+ pkt_handled =
+ handle_vs_write_file_block_cmd_complete(dev,
+ data);
+ else if (op_code == CG2900_BT_OP_VS_POWER_SWITCH_OFF)
+ pkt_handled =
+ handle_vs_power_switch_off_cmd_complete(dev,
+ data);
+ else if (op_code == CG2900_BT_OP_VS_SYSTEM_RESET)
+ pkt_handled = handle_vs_system_reset_cmd_complete(dev,
+ data);
+ else if (op_code == CG2900_BT_OP_VS_BT_ENABLE)
+ pkt_handled = handle_vs_bt_enable_cmd_complete(dev,
+ data);
+ else if (op_code == CG2900_BT_OP_VS_READ_SELTESTS_RESULT)
+ pkt_handled = handle_vs_read_selftests_cmd_complete(dev,
+ data);
+ } else if (HCI_EV_CMD_STATUS == evt->evt) {
+ struct hci_ev_cmd_status *cmd_status;
+
+ cmd_status = (struct hci_ev_cmd_status *)data;
+
+ op_code = le16_to_cpu(cmd_status->opcode);
+
+ dev_dbg(dev->dev, "Received Command Status: op_code = 0x%04X\n",
+ op_code);
+
+ if (op_code == CG2900_BT_OP_VS_WRITE_FILE_BLOCK)
+ pkt_handled = handle_vs_write_file_block_cmd_status
+ (dev, cmd_status->status);
+ else if (op_code == CG2900_BT_OP_VS_BT_ENABLE)
+ pkt_handled = handle_vs_bt_enable_cmd_status
+ (dev, cmd_status->status);
+ } else if (HCI_EV_HW_ERROR == evt->evt) {
+ struct hci_ev_hw_error *hw_error;
+
+ hw_error = (struct hci_ev_hw_error *)data;
+ /*
+ * Only do a printout. There might be a receiving stack that can
+ * handle this event
+ */
+ dev_err(dev->dev, "HW Error event received with error 0x%02X\n",
+ hw_error->hw_code);
+ return false;
+ } else
+ return false;
+
+ if (pkt_handled)
+ kfree_skb(skb);
+
+ return pkt_handled;
+}
+
+/**
+ * transmit_skb_with_flow_ctrl_bt() - Send the BT skb to the controller if it is allowed or queue it.
+ * @user: Current user.
+ * @skb: Data packet.
+ *
+ * The transmit_skb_with_flow_ctrl_bt() function checks if there are
+ * tickets available and if so transmits buffer to controller. Otherwise the skb
+ * and user name is stored in a list for later sending.
+ * If enabled, copy the transmitted data to the HCI logger as well.
+ */
+static void transmit_skb_with_flow_ctrl_bt(struct cg2900_user_data *user,
+ struct sk_buff *skb)
+{
+ struct cg2900_chip_dev *dev = cg2900_get_prv(user);
+ struct cg2900_chip_info *info = dev->c_data;
+
+ /*
+ * Because there are more users of some H4 channels (currently audio
+ * application for BT command and FM channel) we need to have an
+ * internal HCI command flow control in CG2900 driver.
+ * So check here how many tickets we have and store skb in a queue if
+ * there are no tickets left. The skb will be sent later when we get
+ * more ticket(s).
+ */
+ spin_lock_bh(&info->tx_bt_lock);
+
+ if (info->tx_nr_pkts_allowed_bt > 0) {
+ info->tx_nr_pkts_allowed_bt--;
+ dev_dbg(user->dev, "New tx_nr_pkts_allowed_bt = %d\n",
+ info->tx_nr_pkts_allowed_bt);
+
+ /*
+ * If it's command from audio app store the OpCode,
+ * it'll be used later to decide where to dispatch Command
+ * Complete event.
+ */
+ if (info->bt_audio == user) {
+ struct hci_command_hdr *hdr = (struct hci_command_hdr *)
+ (skb->data + HCI_H4_SIZE);
+
+ info->audio_bt_cmd_op = le16_to_cpu(hdr->opcode);
+ dev_dbg(user->dev,
+ "Sending cmd from audio driver, saving "
+ "OpCode = 0x%X\n",
+ info->audio_bt_cmd_op);
+ }
+
+ cg2900_tx_to_chip(user, info->logger, skb);
+ } else {
+ dev_dbg(user->dev, "Not allowed to send cmd to controller, "
+ "storing in TX queue\n");
+
+ cg2900_skb_data(skb)->user = user;
+ skb_queue_tail(&info->tx_queue_bt, skb);
+ }
+ spin_unlock_bh(&info->tx_bt_lock);
+}
+
+/**
+ * transmit_skb_with_flow_ctrl_fm() - Send the FM skb to the controller if it is allowed or queue it.
+ * @user: Current user.
+ * @skb: Data packet.
+ *
+ * The transmit_skb_with_flow_ctrl_fm() function checks if chip is available and
+ * if so transmits buffer to controller. Otherwise the skb and user name is
+ * stored in a list for later sending.
+ * Also it updates the FM radio mode if it's FM GOTOMODE command, this is needed
+ * to know how to handle some FM DO commands complete events.
+ * If enabled, copy the transmitted data to the HCI logger as well.
+ */
+static void transmit_skb_with_flow_ctrl_fm(struct cg2900_user_data *user,
+ struct sk_buff *skb)
+{
+ u8 cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ u16 cmd_id = CG2900_FM_CMD_NONE;
+ struct cg2900_chip_dev *dev = cg2900_get_prv(user);
+ struct cg2900_chip_info *info = dev->c_data;
+
+ fm_parse_cmd(&(skb->data[0]), &cmd_func, &cmd_id);
+
+ /*
+ * If this is an FM IP disable or reset send command and also reset
+ * the flow control and audio user.
+ */
+ if (cmd_func == CG2900_FM_CMD_PARAM_DISABLE ||
+ cmd_func == CG2900_FM_CMD_PARAM_RESET) {
+ spin_lock_bh(&info->tx_fm_lock);
+ fm_reset_flow_ctrl(info);
+ spin_unlock_bh(&info->tx_fm_lock);
+ cg2900_tx_to_chip(user, info->logger, skb);
+ return;
+ }
+
+ /*
+ * If this is a FM user and no FM audio user command pending just send
+ * FM command. It is up to the user of the FM channel to handle its own
+ * flow control.
+ */
+ spin_lock_bh(&info->tx_fm_lock);
+ if (info->fm_audio != user &&
+ info->audio_fm_cmd_id == CG2900_FM_CMD_NONE) {
+ info->hci_fm_cmd_func = cmd_func;
+ dev_dbg(user->dev, "Sending FM radio command 0x%04X\n",
+ info->hci_fm_cmd_func);
+ /* If a GotoMode command update FM mode */
+ fm_update_mode(info, &skb->data[0]);
+ cg2900_tx_to_chip(user, info->logger, skb);
+ } else if (info->fm_audio == user &&
+ info->hci_fm_cmd_func == CG2900_FM_CMD_PARAM_NONE &&
+ info->audio_fm_cmd_id == CG2900_FM_CMD_NONE) {
+ /*
+ * If it's command from fm audio user store the command id.
+ * It'll be used later to decide where to dispatch
+ * command complete event.
+ */
+ info->audio_fm_cmd_id = cmd_id;
+ dev_dbg(user->dev, "Sending FM audio command 0x%04X\n",
+ info->audio_fm_cmd_id);
+ cg2900_tx_to_chip(user, info->logger, skb);
+ } else {
+ dev_dbg(user->dev,
+ "Not allowed to send FM cmd to controller, storing in "
+ "TX queue\n");
+
+ cg2900_skb_data(skb)->user = user;
+ skb_queue_tail(&info->tx_queue_fm, skb);
+ }
+ spin_unlock_bh(&info->tx_fm_lock);
+}
+
+/**
+ * is_bt_audio_user() - Checks if this packet is for the BT audio user.
+ * @info: CG2900 info.
+ * @h4_channel: H:4 channel for this packet.
+ * @skb: Packet to check.
+ *
+ * Returns:
+ * true if packet is for BT audio user.
+ * false otherwise.
+ */
+static bool is_bt_audio_user(struct cg2900_chip_info *info, int h4_channel,
+ const struct sk_buff * const skb)
+{
+ struct hci_event_hdr *hdr;
+ u8 *payload;
+ u16 opcode;
+
+ if (h4_channel != CHANNEL_BT_EVT)
+ return false;
+
+ hdr = (struct hci_event_hdr *)skb->data;
+ payload = (u8 *)(hdr + 1); /* follows header */
+
+ if (HCI_EV_CMD_COMPLETE == hdr->evt)
+ opcode = le16_to_cpu(
+ ((struct hci_ev_cmd_complete *)payload)->opcode);
+ else if (HCI_EV_CMD_STATUS == hdr->evt)
+ opcode = le16_to_cpu(
+ ((struct hci_ev_cmd_status *)payload)->opcode);
+ else
+ return false;
+
+ if (opcode != info->audio_bt_cmd_op)
+ return false;
+
+ dev_dbg(info->bt_audio->dev, "Audio BT OpCode match = 0x%04X\n",
+ opcode);
+ info->audio_bt_cmd_op = CG2900_BT_OPCODE_NONE;
+ return true;
+}
+
+/**
+ * is_fm_audio_user() - Checks if this packet is for the FM audio user.
+ * @info: CG2900 info.
+ * @h4_channel: H:4 channel for this packet.
+ * @skb: Packet to check.
+ *
+ * Returns:
+ * true if packet is for BT audio user.
+ * false otherwise.
+ */
+static bool is_fm_audio_user(struct cg2900_chip_info *info, int h4_channel,
+ const struct sk_buff * const skb)
+{
+ u8 cmd_func;
+ u16 cmd_id;
+ u16 irpt_val;
+ u8 event;
+
+ if (h4_channel != CHANNEL_FM_RADIO)
+ return false;
+
+ cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ cmd_id = CG2900_FM_CMD_NONE;
+ irpt_val = 0;
+ event = CG2900_FM_EVENT_UNKNOWN;
+
+ fm_parse_event(&skb->data[0], &event, &cmd_func, &cmd_id,
+ &irpt_val);
+ /* Check if command complete event FM legacy interface. */
+ if ((event == CG2900_FM_EVENT_CMD_COMPLETE) &&
+ (cmd_func == CG2900_FM_CMD_PARAM_WRITECOMMAND) &&
+ (cmd_id == info->audio_fm_cmd_id)) {
+ dev_dbg(info->fm_audio->dev,
+ "FM Audio Function Code match = 0x%04X\n",
+ cmd_id);
+ return true;
+ }
+
+ /* Check if Interrupt legacy interface. */
+ if ((event == CG2900_FM_EVENT_INTERRUPT) &&
+ (fm_is_do_cmd_irpt(irpt_val)) &&
+ (info->tx_fm_audio_awaiting_irpt))
+ return true;
+
+ return false;
+}
+
+/**
+ * data_from_chip() - Called when data is received from the chip.
+ * @dev: Chip info.
+ * @cg2900_dev: CG2900 user for this packet.
+ * @skb: Packet received.
+ *
+ * The data_from_chip() function updates flow control and checks
+ * if packet is a response for a packet it itself has transmitted. If not it
+ * finds the correct user and sends the packet* to the user.
+ */
+static void data_from_chip(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb)
+{
+ int h4_channel;
+ struct list_head *cursor;
+ struct cg2900_channel_item *tmp;
+ struct cg2900_chip_info *info = dev->c_data;
+ struct cg2900_user_data *user = NULL;
+
+ spin_lock_bh(&info->rw_lock);
+ /* Copy RX Data into logger.*/
+ if (info->logger)
+ cg2900_send_to_hci_logger(info->logger, skb,
+ LOGGER_DIRECTION_RX);
+
+ h4_channel = skb->data[0];
+ skb_pull(skb, HCI_H4_SIZE);
+
+ /* First check if it is a BT or FM audio event */
+ if (is_bt_audio_user(info, h4_channel, skb))
+ user = info->bt_audio;
+ else if (is_fm_audio_user(info, h4_channel, skb))
+ user = info->fm_audio;
+ spin_unlock_bh(&info->rw_lock);
+
+ /* Now check if we should update flow control */
+ if (h4_channel == CHANNEL_BT_EVT)
+ update_flow_ctrl_bt(dev, skb);
+ else if (h4_channel == CHANNEL_FM_RADIO)
+ update_flow_ctrl_fm(dev, skb);
+
+ /* Then check if this is a response to data we have sent */
+ if (h4_channel == CHANNEL_BT_EVT && handle_rx_data_bt_evt(dev, skb))
+ return;
+
+ spin_lock_bh(&info->rw_lock);
+
+ if (user)
+ goto user_found;
+
+ /* Let's see if it is the last user */
+ if (info->last_user && info->last_user->h4_channel == h4_channel) {
+ user = info->last_user;
+ goto user_found;
+ }
+
+ /* Search through the list of all open channels to find the user */
+ list_for_each(cursor, &info->open_channels) {
+ tmp = list_entry(cursor, struct cg2900_channel_item, list);
+ if (tmp->user->h4_channel == h4_channel) {
+ user = tmp->user;
+ goto user_found;
+ }
+ }
+
+user_found:
+ if (user != info->bt_audio && user != info->fm_audio)
+ info->last_user = user;
+
+ spin_unlock_bh(&info->rw_lock);
+
+ if (user)
+ user->read_cb(user, skb);
+ else {
+ dev_err(dev->dev,
+ "Could not find corresponding user to h4_channel %d\n",
+ h4_channel);
+ kfree_skb(skb);
+ }
+}
+
+/**
+ * chip_removed() - Called when transport has been removed.
+ * @dev: Chip device.
+ *
+ * Removes registered MFD devices and frees internal resources.
+ */
+static void chip_removed(struct cg2900_chip_dev *dev)
+{
+ struct cg2900_chip_info *info = dev->c_data;
+
+ cancel_delayed_work(&info->selftest_work.work);
+ mfd_remove_devices(dev->dev);
+ kfree(info->settings_file_name);
+ kfree(info->patch_file_name);
+ destroy_workqueue(info->wq);
+ kfree(info);
+ dev->c_data = NULL;
+ dev->c_cb.chip_removed = NULL;
+ dev->c_cb.data_from_chip = NULL;
+}
+
+/**
+ * last_bt_user_removed() - Called when last BT user is removed.
+ * @info: Chip handler info.
+ *
+ * Clears out TX queue for BT.
+ */
+static void last_bt_user_removed(struct cg2900_chip_info *info)
+{
+ spin_lock_bh(&info->tx_bt_lock);
+ skb_queue_purge(&info->tx_queue_bt);
+
+ /*
+ * Reset number of packets allowed and number of outstanding
+ * BT commands.
+ */
+ info->tx_nr_pkts_allowed_bt = 1;
+ /* Reset the audio_bt_cmd_op. */
+ info->audio_bt_cmd_op = CG2900_BT_OPCODE_NONE;
+ spin_unlock_bh(&info->tx_bt_lock);
+}
+
+/**
+ * last_fm_user_removed() - Called when last FM user is removed.
+ * @info: Chip handler info.
+ *
+ * Clears out TX queue for BT.
+ */
+static void last_fm_user_removed(struct cg2900_chip_info *info)
+{
+ spin_lock_bh(&info->tx_fm_lock);
+ fm_reset_flow_ctrl(info);
+ spin_unlock_bh(&info->tx_fm_lock);
+}
+
+/**
+ * chip_shutdown() - Reset and power the chip off.
+ * @user: MFD device.
+ */
+static void chip_shutdown(struct cg2900_user_data *user)
+{
+ struct hci_command_hdr cmd;
+ struct cg2900_chip_dev *dev = cg2900_get_prv(user);
+ struct cg2900_chip_info *info = dev->c_data;
+
+ dev_dbg(user->dev, "chip_shutdown\n");
+
+ /* First do a quick power switch of the chip to assure a good state */
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, false);
+
+ /*
+ * Wait 50ms before continuing to be sure that the chip detects
+ * chip power off.
+ */
+ schedule_timeout_killable(
+ msecs_to_jiffies(LINE_TOGGLE_DETECT_TIMEOUT));
+
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, true);
+
+ /* Wait 100ms before continuing to be sure that the chip is ready */
+ schedule_timeout_killable(msecs_to_jiffies(CHIP_READY_TIMEOUT));
+
+ if (user != info->bt_audio && user != info->fm_audio)
+ info->last_user = user;
+ info->user_in_charge = user;
+
+ /*
+ * Transmit HCI reset command to ensure the chip is using
+ * the correct transport and to put BT part in reset.
+ */
+ dev_dbg(user->dev, "New closing_state: CLOSING_RESET\n");
+ info->closing_state = CLOSING_RESET;
+ cmd.opcode = cpu_to_le16(HCI_OP_RESET);
+ cmd.plen = 0; /* No parameters for HCI reset */
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger, &cmd,
+ sizeof(cmd));
+}
+
+/**
+ * chip_startup_finished() - Called when chip startup has finished.
+ * @info: Chip handler info.
+ * @err: Result of chip startup, 0 for no error.
+ *
+ * Shuts down the chip upon error, sets state to active, wakes waiting threads,
+ * and informs transport that startup has finished.
+ */
+static void chip_startup_finished(struct cg2900_chip_info *info, int err)
+{
+ dev_dbg(BOOT_DEV, "chip_startup_finished (%d)\n", err);
+
+ if (err)
+ /* Shutdown the chip */
+ cg2900_create_work_item(info->wq, work_chip_shutdown,
+ info->user_in_charge);
+ else {
+ dev_dbg(BOOT_DEV, "New main_state: CG2900_ACTIVE\n");
+ info->main_state = CG2900_ACTIVE;
+ }
+
+ wake_up_all(&main_wait_queue);
+
+ if (err)
+ return;
+
+ if (!info->chip_dev->t_cb.chip_startup_finished)
+ dev_dbg(BOOT_DEV, "chip_startup_finished callback not found\n");
+ else
+ info->chip_dev->t_cb.chip_startup_finished(info->chip_dev);
+}
+
+/**
+ * cg2900_open() - Called when user wants to open an H4 channel.
+ * @user: MFD device to open.
+ *
+ * Checks that H4 channel is not already opened. If chip is not started, starts
+ * up the chip. Sets channel as opened and adds user to active users.
+ *
+ * Returns:
+ * 0 if success.
+ * -EINVAL if user is NULL or read_cb is NULL.
+ * -EBUSY if chip is in transit state (being started or shutdown).
+ * -EACCES if H4 channel is already opened.
+ * -ENOMEM if allocation fails.
+ * -EIO if chip startup fails.
+ * Error codes generated by t_cb.open.
+ */
+static int cg2900_open(struct cg2900_user_data *user)
+{
+ int err;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+ struct list_head *cursor;
+ struct cg2900_channel_item *tmp;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV, "cg2900_open: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ if (!user->read_cb) {
+ dev_err(user->dev, "cg2900_open: read_cb missing\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(user->dev, "cg2900_open\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ mutex_lock(&main_info->man_mutex);
+
+ /*
+ * Add a minor wait in order to avoid CPU blocking, looping openings.
+ * Note there will of course be no wait if we are already in the right
+ * state.
+ */
+ err = wait_event_timeout(main_wait_queue,
+ (CG2900_IDLE == info->main_state ||
+ CG2900_ACTIVE == info->main_state),
+ msecs_to_jiffies(LINE_TOGGLE_DETECT_TIMEOUT));
+ if (err <= 0) {
+ if (CG2900_INIT == info->main_state)
+ dev_err(user->dev, "Transport not opened\n");
+ else
+ dev_err(user->dev, "cg2900_open currently busy (0x%X). "
+ "Try again\n", info->main_state);
+ err = -EBUSY;
+ goto err_free_mutex;
+ }
+
+ err = 0;
+
+ list_for_each(cursor, &info->open_channels) {
+ tmp = list_entry(cursor, struct cg2900_channel_item, list);
+ if (tmp->user->h4_channel == user->h4_channel &&
+ tmp->user->is_audio == user->is_audio) {
+ dev_err(user->dev, "Channel %d is already opened\n",
+ user->h4_channel);
+ err = -EACCES;
+ goto err_free_mutex;
+ }
+ }
+
+ tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
+ if (!tmp) {
+ dev_err(user->dev, "Could not allocate tmp\n");
+ err = -ENOMEM;
+ goto err_free_mutex;
+ }
+ tmp->user = user;
+
+ if (CG2900_ACTIVE != info->main_state &&
+ !user->chip_independent) {
+ /* Open transport and start-up the chip */
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, true);
+
+ /* Wait to be sure that the chip is ready */
+ schedule_timeout_killable(
+ msecs_to_jiffies(CHIP_READY_TIMEOUT));
+
+ if (dev->t_cb.open) {
+ err = dev->t_cb.open(dev);
+ if (err) {
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, false);
+ goto err_free_list_item;
+ }
+ }
+
+ /* Start the boot sequence */
+ info->user_in_charge = user;
+ if (user != info->bt_audio && user != info->fm_audio)
+ info->last_user = user;
+ dev_dbg(user->dev, "New boot_state: BOOT_GET_FILES_TO_LOAD\n");
+ info->boot_state = BOOT_GET_FILES_TO_LOAD;
+ dev_dbg(user->dev, "New main_state: CG2900_BOOTING\n");
+ info->main_state = CG2900_BOOTING;
+ cg2900_create_work_item(info->wq, work_load_patch_and_settings,
+ dev);
+
+ dev_dbg(user->dev, "Wait up to 15 seconds for chip to start\n");
+ wait_event_timeout(main_wait_queue,
+ (CG2900_ACTIVE == info->main_state ||
+ CG2900_IDLE == info->main_state),
+ msecs_to_jiffies(CHIP_STARTUP_TIMEOUT));
+ if (CG2900_ACTIVE != info->main_state) {
+ dev_err(user->dev, "CG2900 driver failed to start\n");
+
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ dev_dbg(user->dev, "New main_state: CG2900_IDLE\n");
+ info->main_state = CG2900_IDLE;
+ err = -EIO;
+ goto err_free_list_item;
+ }
+ }
+
+ list_add_tail(&tmp->list, &info->open_channels);
+
+ user->opened = true;
+
+ dev_dbg(user->dev, "H:4 channel opened\n");
+
+ mutex_unlock(&main_info->man_mutex);
+ return 0;
+err_free_list_item:
+ kfree(tmp);
+err_free_mutex:
+ mutex_unlock(&main_info->man_mutex);
+ return err;
+}
+
+/**
+ * cg2900_hci_log_open() - Called when user wants to open HCI logger channel.
+ * @user: MFD device to open.
+ *
+ * Registers user as hci_logger and calls @cg2900_open to open the channel.
+ *
+ * Returns:
+ * 0 if success.
+ * -EINVAL if user is NULL.
+ * -EACCES if H4 channel is already opened.
+ * Error codes generated by cg2900_open.
+ */
+static int cg2900_hci_log_open(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+ int err;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "cg2900_hci_log_open: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(user->dev, "cg2900_hci_log_open\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (info->logger) {
+ dev_err(user->dev, "HCI Logger already stored\n");
+ return -EACCES;
+ }
+
+ info->logger = user;
+ err = cg2900_open(user);
+ if (err)
+ info->logger = NULL;
+ return err;
+}
+
+/**
+ * cg2900_bt_audio_open() - Called when user wants to open BT audio channel.
+ * @user: MFD device to open.
+ *
+ * Registers user as bt_audio and calls @cg2900_open to open the channel.
+ *
+ * Returns:
+ * 0 if success.
+ * -EINVAL if user is NULL.
+ * -EACCES if H4 channel is already opened.
+ * Error codes generated by cg2900_open.
+ */
+static int cg2900_bt_audio_open(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+ int err;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "cg2900_bt_audio_open: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(user->dev, "cg2900_bt_audio_open\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (info->bt_audio) {
+ dev_err(user->dev, "BT Audio already stored\n");
+ return -EACCES;
+ }
+
+ info->bt_audio = user;
+ err = cg2900_open(user);
+ if (err)
+ info->bt_audio = NULL;
+ return err;
+}
+
+/**
+ * cg2900_fm_audio_open() - Called when user wants to open FM audio channel.
+ * @user: MFD device to open.
+ *
+ * Registers user as fm_audio and calls @cg2900_open to open the channel.
+ *
+ * Returns:
+ * 0 if success.
+ * -EINVAL if user is NULL.
+ * -EACCES if H4 channel is already opened.
+ * Error codes generated by cg2900_open.
+ */
+static int cg2900_fm_audio_open(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+ int err;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "cg2900_fm_audio_open: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(user->dev, "cg2900_fm_audio_open\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (info->fm_audio) {
+ dev_err(user->dev, "FM Audio already stored\n");
+ return -EACCES;
+ }
+
+ info->fm_audio = user;
+ err = cg2900_open(user);
+ if (err)
+ info->fm_audio = NULL;
+ return err;
+}
+
+/**
+ * cg2900_close() - Called when user wants to close an H4 channel.
+ * @user: MFD device to close.
+ *
+ * Clears up internal resources, sets channel as closed, and shuts down chip if
+ * this was the last user.
+ */
+static void cg2900_close(struct cg2900_user_data *user)
+{
+ bool keep_powered = false;
+ struct list_head *cursor, *next;
+ struct cg2900_channel_item *tmp;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV, "cg2900_close: Calling with NULL pointer\n");
+ return;
+ }
+
+ dev_dbg(user->dev, "cg2900_close\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ mutex_lock(&main_info->man_mutex);
+
+ /*
+ * Go through each open channel. Remove our channel and check if there
+ * is any other channel that want to keep the chip running
+ */
+ list_for_each_safe(cursor, next, &info->open_channels) {
+ tmp = list_entry(cursor, struct cg2900_channel_item, list);
+ if (tmp->user == user) {
+ list_del(cursor);
+ kfree(tmp);
+ } else if (!tmp->user->chip_independent)
+ keep_powered = true;
+ }
+
+ if (user->h4_channel == CHANNEL_BT_CMD && !bt_is_open(info))
+ last_bt_user_removed(info);
+ else if (user->h4_channel == CHANNEL_FM_RADIO && !fm_is_open(info))
+ last_fm_user_removed(info);
+
+ if (keep_powered)
+ /* This was not the last user, we're done. */
+ goto finished;
+
+ if (CG2900_IDLE == info->main_state)
+ /* Chip has already been shut down. */
+ goto finished;
+
+ dev_dbg(user->dev, "New main_state: CG2900_CLOSING\n");
+ info->main_state = CG2900_CLOSING;
+ chip_shutdown(user);
+
+ dev_dbg(user->dev, "Wait up to 15 seconds for chip to shut-down\n");
+ wait_event_timeout(main_wait_queue,
+ (CG2900_IDLE == info->main_state),
+ msecs_to_jiffies(CHIP_SHUTDOWN_TIMEOUT));
+
+ /* Force shutdown if we timed out */
+ if (CG2900_IDLE != info->main_state) {
+ dev_err(user->dev,
+ "ST-Ericsson CG2900 Core Driver was shut-down with "
+ "problems\n");
+
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ dev_dbg(user->dev, "New main_state: CG2900_IDLE\n");
+ info->main_state = CG2900_IDLE;
+ }
+
+finished:
+ mutex_unlock(&main_info->man_mutex);
+ user->opened = false;
+ dev_dbg(user->dev, "H:4 channel closed\n");
+}
+
+/**
+ * cg2900_hci_log_close() - Called when user wants to close HCI logger channel.
+ * @user: MFD device to close.
+ *
+ * Clears hci_logger user and calls @cg2900_close to close the channel.
+ */
+static void cg2900_hci_log_close(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "cg2900_hci_log_close: Calling with NULL pointer\n");
+ return;
+ }
+
+ dev_dbg(user->dev, "cg2900_hci_log_close\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (user != info->logger) {
+ dev_err(user->dev, "cg2900_hci_log_close: Trying to remove "
+ "another user\n");
+ return;
+ }
+
+ info->logger = NULL;
+ cg2900_close(user);
+}
+
+/**
+ * cg2900_bt_audio_close() - Called when user wants to close BT audio channel.
+ * @user: MFD device to close.
+ *
+ * Clears bt_audio user and calls @cg2900_close to close the channel.
+ */
+static void cg2900_bt_audio_close(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "cg2900_bt_audio_close: Calling with NULL pointer\n");
+ return;
+ }
+
+ dev_dbg(user->dev, "cg2900_bt_audio_close\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (user != info->bt_audio) {
+ dev_err(user->dev, "cg2900_bt_audio_close: Trying to remove "
+ "another user\n");
+ return;
+ }
+
+ info->bt_audio = NULL;
+ cg2900_close(user);
+}
+
+/**
+ * cg2900_fm_audio_close() - Called when user wants to close FM audio channel.
+ * @user: MFD device to close.
+ *
+ * Clears fm_audio user and calls @cg2900_close to close the channel.
+ */
+static void cg2900_fm_audio_close(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "cg2900_fm_audio_close: Calling with NULL pointer\n");
+ return;
+ }
+
+ dev_dbg(user->dev, "cg2900_fm_audio_close\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (user != info->fm_audio) {
+ dev_err(user->dev, "cg2900_fm_audio_close: Trying to remove "
+ "another user\n");
+ return;
+ }
+
+ info->fm_audio = NULL;
+ cg2900_close(user);
+}
+
+/**
+ * cg2900_reset() - Called when user wants to reset the chip.
+ * @user: MFD device to reset.
+ *
+ * Closes down the chip and calls reset_cb for all open users.
+ *
+ * Returns:
+ * 0 if success.
+ * -EINVAL if user is NULL.
+ */
+static int cg2900_reset(struct cg2900_user_data *user)
+{
+ struct list_head *cursor, *next;
+ struct cg2900_channel_item *tmp;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ if (!user) {
+ dev_err(MAIN_DEV, "cg2900_reset: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ dev_info(user->dev, "cg2900_reset\n");
+
+ BUG_ON(!main_info);
+
+ mutex_lock(&main_info->man_mutex);
+
+ dev_dbg(user->dev, "New main_state: CG2900_RESETING\n");
+ info->main_state = CG2900_RESETING;
+
+ chip_shutdown(user);
+
+ /*
+ * Inform all opened channels about the reset and free the user devices
+ */
+ list_for_each_safe(cursor, next, &info->open_channels) {
+ tmp = list_entry(cursor, struct cg2900_channel_item, list);
+ list_del(cursor);
+ tmp->user->opened = false;
+ tmp->user->reset_cb(tmp->user);
+ kfree(tmp);
+ }
+
+ /* Reset finished. We are now idle until first channel is opened */
+ dev_dbg(user->dev, "New main_state: CG2900_IDLE\n");
+ info->main_state = CG2900_IDLE;
+
+ mutex_unlock(&main_info->man_mutex);
+
+ /*
+ * Send wake-up since this might have been called from a failed boot.
+ * No harm done if it is a CG2900 chip user who called.
+ */
+ wake_up_all(&main_wait_queue);
+
+ return 0;
+}
+
+/**
+ * cg2900_alloc_skb() - Allocates socket buffer.
+ * @size: Sk_buffer size in bytes.
+ * @priority: GFP priorit for allocation.
+ *
+ * Allocates a sk_buffer and reserves space for H4 header.
+ *
+ * Returns:
+ * sk_buffer if success.
+ * NULL if allocation fails.
+ */
+static struct sk_buff *cg2900_alloc_skb(unsigned int size, gfp_t priority)
+{
+ struct sk_buff *skb;
+
+ dev_dbg(MAIN_DEV, "cg2900_alloc_skb size %d bytes\n", size);
+
+ /* Allocate the SKB and reserve space for the header */
+ skb = alloc_skb(size + CG2900_SKB_RESERVE, priority);
+ if (skb)
+ skb_reserve(skb, CG2900_SKB_RESERVE);
+
+ return skb;
+}
+
+/**
+ * cg2900_write() - Called when user wants to write to the chip.
+ * @user: MFD device representing H4 channel to write to.
+ * @skb: Sk_buffer to transmit.
+ *
+ * Transmits the sk_buffer to the chip. If it is a BT cmd or FM audio packet it
+ * is checked that it is allowed to transmit the chip.
+ * Note that if error is returned it is up to the user to free the skb.
+ *
+ * Returns:
+ * 0 if success.
+ * -EINVAL if user or skb is NULL.
+ * -EACCES if channel is closed.
+ */
+static int cg2900_write(struct cg2900_user_data *user, struct sk_buff *skb)
+{
+ u8 *h4_header;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV, "cg2900_write: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ if (!skb) {
+ dev_err(user->dev, "cg2900_write with no sk_buffer\n");
+ return -EINVAL;
+ }
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ dev_dbg(user->dev, "cg2900_write length %d bytes\n", skb->len);
+
+ if (!user->opened) {
+ dev_err(user->dev,
+ "Trying to transmit data on a closed channel\n");
+ return -EACCES;
+ }
+
+ /*
+ * Move the data pointer to the H:4 header position and
+ * store the H4 header.
+ */
+ h4_header = skb_push(skb, CG2900_SKB_RESERVE);
+ *h4_header = (u8)user->h4_channel;
+
+ if (user->h4_channel == CHANNEL_BT_CMD)
+ transmit_skb_with_flow_ctrl_bt(user, skb);
+ else if (user->h4_channel == CHANNEL_FM_RADIO)
+ transmit_skb_with_flow_ctrl_fm(user, skb);
+ else
+ cg2900_tx_to_chip(user, info->logger, skb);
+
+ return 0;
+}
+
+/**
+ * cg2900_no_write() - Used for channels where it is not allowed to write.
+ * @user: MFD device representing H4 channel to write to.
+ * @skb: Sk_buffer to transmit.
+ *
+ * Returns:
+ * -EPERM.
+ */
+static int cg2900_no_write(struct cg2900_user_data *user,
+ __attribute__((unused)) struct sk_buff *skb)
+{
+ dev_err(user->dev, "Not allowed to send on this channel\n");
+ return -EPERM;
+}
+
+/**
+ * cg2900_get_local_revision() - Called to retrieve revision data for the chip.
+ * @user: MFD device to check.
+ * @rev_data: Revision data to fill in.
+ *
+ * Returns:
+ * true if success.
+ * false upon failure.
+ */
+static bool cg2900_get_local_revision(struct cg2900_user_data *user,
+ struct cg2900_rev_data *rev_data)
+{
+ struct cg2900_chip_dev *dev;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV, "cg2900_get_local_revision: Calling with "
+ "NULL pointer\n");
+ return false;
+ }
+
+ if (!rev_data) {
+ dev_err(user->dev, "Calling with rev_data NULL\n");
+ return false;
+ }
+
+ dev = cg2900_get_prv(user);
+
+ rev_data->revision = dev->chip.hci_revision;
+ rev_data->sub_version = dev->chip.hci_sub_version;
+
+ return true;
+}
+
+static struct cg2900_user_data btcmd_data = {
+ .h4_channel = CHANNEL_BT_CMD,
+};
+static struct cg2900_user_data btacl_data = {
+ .h4_channel = CHANNEL_BT_ACL,
+};
+static struct cg2900_user_data btevt_data = {
+ .h4_channel = CHANNEL_BT_EVT,
+};
+static struct cg2900_user_data fm_data = {
+ .h4_channel = CHANNEL_FM_RADIO,
+};
+static struct cg2900_user_data gnss_data = {
+ .h4_channel = CHANNEL_GNSS,
+};
+static struct cg2900_user_data debug_data = {
+ .h4_channel = CHANNEL_DEBUG,
+};
+static struct cg2900_user_data ste_tools_data = {
+ .h4_channel = CHANNEL_STE_TOOLS,
+};
+static struct cg2900_user_data hci_logger_data = {
+ .h4_channel = CHANNEL_HCI_LOGGER,
+ .chip_independent = true,
+ .write = cg2900_no_write,
+ .open = cg2900_hci_log_open,
+ .close = cg2900_hci_log_close,
+};
+static struct cg2900_user_data core_data = {
+ .h4_channel = CHANNEL_CORE,
+ .write = cg2900_no_write,
+};
+static struct cg2900_user_data audio_bt_data = {
+ .h4_channel = CHANNEL_BT_CMD,
+ .is_audio = true,
+ .open = cg2900_bt_audio_open,
+ .close = cg2900_bt_audio_close,
+};
+static struct cg2900_user_data audio_fm_data = {
+ .h4_channel = CHANNEL_FM_RADIO,
+ .is_audio = true,
+ .open = cg2900_fm_audio_open,
+ .close = cg2900_fm_audio_close,
+};
+
+static struct mfd_cell cg2900_devs[] = {
+ {
+ .name = "cg2900-btcmd",
+ .platform_data = &btcmd_data,
+ .data_size = sizeof(btcmd_data),
+ },
+ {
+ .name = "cg2900-btacl",
+ .platform_data = &btacl_data,
+ .data_size = sizeof(btacl_data),
+ },
+ {
+ .name = "cg2900-btevt",
+ .platform_data = &btevt_data,
+ .data_size = sizeof(btevt_data),
+ },
+ {
+ .name = "cg2900-fm",
+ .platform_data = &fm_data,
+ .data_size = sizeof(fm_data),
+ },
+ {
+ .name = "cg2900-gnss",
+ .platform_data = &gnss_data,
+ .data_size = sizeof(gnss_data),
+ },
+ {
+ .name = "cg2900-debug",
+ .platform_data = &debug_data,
+ .data_size = sizeof(debug_data),
+ },
+ {
+ .name = "cg2900-stetools",
+ .platform_data = &ste_tools_data,
+ .data_size = sizeof(ste_tools_data),
+ },
+ {
+ .name = "cg2900-hcilogger",
+ .platform_data = &hci_logger_data,
+ .data_size = sizeof(hci_logger_data),
+ },
+ {
+ .name = "cg2900-core",
+ .platform_data = &core_data,
+ .data_size = sizeof(core_data),
+ },
+ {
+ .name = "cg2900-audiobt",
+ .platform_data = &audio_bt_data,
+ .data_size = sizeof(audio_bt_data),
+ },
+ {
+ .name = "cg2900-audiofm",
+ .platform_data = &audio_fm_data,
+ .data_size = sizeof(audio_fm_data),
+ },
+};
+
+static struct cg2900_user_data char_btcmd_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_BT_CMD,
+ },
+ .h4_channel = CHANNEL_BT_CMD,
+};
+static struct cg2900_user_data char_btacl_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_BT_ACL,
+ },
+ .h4_channel = CHANNEL_BT_ACL,
+};
+static struct cg2900_user_data char_btevt_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_BT_EVT,
+ },
+ .h4_channel = CHANNEL_BT_EVT,
+};
+static struct cg2900_user_data char_fm_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_FM_RADIO,
+ },
+ .h4_channel = CHANNEL_FM_RADIO,
+};
+static struct cg2900_user_data char_gnss_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_GNSS,
+ },
+ .h4_channel = CHANNEL_GNSS,
+};
+static struct cg2900_user_data char_debug_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_DEBUG,
+ },
+ .h4_channel = CHANNEL_DEBUG,
+};
+static struct cg2900_user_data char_ste_tools_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_STE_TOOLS,
+ },
+ .h4_channel = CHANNEL_STE_TOOLS,
+};
+static struct cg2900_user_data char_hci_logger_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_HCI_LOGGER,
+ },
+ .h4_channel = CHANNEL_HCI_LOGGER,
+ .chip_independent = true,
+ .write = cg2900_no_write,
+ .open = cg2900_hci_log_open,
+ .close = cg2900_hci_log_close,
+};
+static struct cg2900_user_data char_core_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_CORE,
+ },
+ .h4_channel = CHANNEL_CORE,
+ .write = cg2900_no_write,
+};
+static struct cg2900_user_data char_audio_bt_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_BT_AUDIO,
+ },
+ .h4_channel = CHANNEL_BT_CMD,
+ .is_audio = true,
+};
+static struct cg2900_user_data char_audio_fm_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_FM_AUDIO,
+ },
+ .h4_channel = CHANNEL_FM_RADIO,
+ .is_audio = true,
+};
+
+static struct mfd_cell cg2900_char_devs[] = {
+ {
+ .name = "cg2900-chardev",
+ .id = 0,
+ .platform_data = &char_btcmd_data,
+ .data_size = sizeof(char_btcmd_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 1,
+ .platform_data = &char_btacl_data,
+ .data_size = sizeof(char_btacl_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 2,
+ .platform_data = &char_btevt_data,
+ .data_size = sizeof(char_btevt_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 3,
+ .platform_data = &char_fm_data,
+ .data_size = sizeof(char_fm_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 4,
+ .platform_data = &char_gnss_data,
+ .data_size = sizeof(char_gnss_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 5,
+ .platform_data = &char_debug_data,
+ .data_size = sizeof(char_debug_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 6,
+ .platform_data = &char_ste_tools_data,
+ .data_size = sizeof(char_ste_tools_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 7,
+ .platform_data = &char_hci_logger_data,
+ .data_size = sizeof(char_hci_logger_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 8,
+ .platform_data = &char_core_data,
+ .data_size = sizeof(char_core_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 9,
+ .platform_data = &char_audio_bt_data,
+ .data_size = sizeof(char_audio_bt_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 10,
+ .platform_data = &char_audio_fm_data,
+ .data_size = sizeof(char_audio_fm_data),
+ },
+};
+
+/**
+ * set_plat_data() - Initializes data for an MFD cell.
+ * @cell: MFD cell.
+ * @dev: Current chip.
+ *
+ * Sets each callback to default function unless already set.
+ */
+static void set_plat_data(struct mfd_cell *cell, struct cg2900_chip_dev *dev)
+{
+ struct cg2900_user_data *pf_data = cell->platform_data;
+
+ if (!pf_data->open)
+ pf_data->open = cg2900_open;
+ if (!pf_data->close)
+ pf_data->close = cg2900_close;
+ if (!pf_data->reset)
+ pf_data->reset = cg2900_reset;
+ if (!pf_data->alloc_skb)
+ pf_data->alloc_skb = cg2900_alloc_skb;
+ if (!pf_data->write)
+ pf_data->write = cg2900_write;
+ if (!pf_data->get_local_revision)
+ pf_data->get_local_revision = cg2900_get_local_revision;
+
+ cg2900_set_prv(pf_data, dev);
+}
+
+/**
+ * check_chip_support() - Checks if connected chip is handled by this driver.
+ * @dev: Chip info structure.
+ *
+ * First check if chip is supported by this driver. If that is the case fill in
+ * the callbacks in @dev and initiate internal variables. Finally create MFD
+ * devices for all supported H4 channels. When finished power off the chip.
+ *
+ * Returns:
+ * true if chip is handled by this driver.
+ * false otherwise.
+ */
+static bool check_chip_support(struct cg2900_chip_dev *dev)
+{
+ struct cg2900_platform_data *pf_data;
+ struct cg2900_chip_info *info;
+ int i;
+ int err;
+
+ dev_dbg(dev->dev, "check_chip_support\n");
+
+ /*
+ * Check if this is a CG2900 revision.
+ * We do not care about the sub-version at the moment. Change this if
+ * necessary.
+ */
+ if ((dev->chip.manufacturer != CG2900_SUPP_MANUFACTURER) ||
+ (dev->chip.hci_revision != CG2900_PG1_SPECIAL_REV &&
+ (dev->chip.hci_revision < CG2900_SUPP_REVISION_MIN ||
+ dev->chip.hci_revision > CG2900_SUPP_REVISION_MAX))) {
+ dev_dbg(dev->dev, "Chip not supported by CG2900 driver\n"
+ "\tMan: 0x%02X\n"
+ "\tRev: 0x%04X\n"
+ "\tSub: 0x%04X\n",
+ dev->chip.manufacturer, dev->chip.hci_revision,
+ dev->chip.hci_sub_version);
+ return false;
+ }
+
+ /* Store needed data */
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(dev->dev, "Couldn't allocate info struct\n");
+ return false;
+ }
+
+ /* Initialize all variables */
+ skb_queue_head_init(&info->tx_queue_bt);
+ skb_queue_head_init(&info->tx_queue_fm);
+
+ INIT_LIST_HEAD(&info->open_channels);
+
+ spin_lock_init(&info->tx_bt_lock);
+ spin_lock_init(&info->tx_fm_lock);
+ spin_lock_init(&info->rw_lock);
+
+ info->tx_nr_pkts_allowed_bt = 1;
+ info->audio_bt_cmd_op = CG2900_BT_OPCODE_NONE;
+ info->audio_fm_cmd_id = CG2900_FM_CMD_NONE;
+ info->hci_fm_cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ info->fm_radio_mode = FM_RADIO_MODE_IDLE;
+ info->chip_dev = dev;
+ info->dev = dev->dev;
+
+ info->wq = create_singlethread_workqueue(WQ_NAME);
+ if (!info->wq) {
+ dev_err(dev->dev, "Could not create workqueue\n");
+ goto err_handling_free_info;
+ }
+
+ info->patch_file_name = kzalloc(NAME_MAX + 1, GFP_ATOMIC);
+ if (!info->patch_file_name) {
+ dev_err(dev->dev,
+ "Couldn't allocate name buffer for patch file\n");
+ goto err_handling_destroy_wq;
+ }
+
+ info->settings_file_name = kzalloc(NAME_MAX + 1, GFP_ATOMIC);
+ if (!info->settings_file_name) {
+ dev_err(dev->dev,
+ "Couldn't allocate name buffers settings file\n");
+ goto err_handling_free_patch_name;
+ }
+
+ info->selftest_work.data = info;
+ INIT_DELAYED_WORK(&info->selftest_work.work,
+ work_send_read_selftest_cmd);
+
+ dev->c_data = info;
+ /* Set the callbacks */
+ dev->c_cb.data_from_chip = data_from_chip;
+ dev->c_cb.chip_removed = chip_removed;
+
+ mutex_lock(&main_info->man_mutex);
+
+ pf_data = dev_get_platdata(dev->dev);
+ btcmd_data.channel_data.bt_bus = pf_data->bus;
+ btacl_data.channel_data.bt_bus = pf_data->bus;
+ btevt_data.channel_data.bt_bus = pf_data->bus;
+
+ for (i = 0; i < ARRAY_SIZE(cg2900_devs); i++)
+ set_plat_data(&cg2900_devs[i], dev);
+ for (i = 0; i < ARRAY_SIZE(cg2900_char_devs); i++)
+ set_plat_data(&cg2900_char_devs[i], dev);
+
+ err = mfd_add_devices(dev->dev, main_info->cell_base_id, cg2900_devs,
+ ARRAY_SIZE(cg2900_devs), NULL, 0);
+ if (err) {
+ dev_err(dev->dev, "Failed to add cg2900_devs (%d)\n", err);
+ goto err_handling_free_settings_name;
+ }
+
+ err = mfd_add_devices(dev->dev, main_info->cell_base_id,
+ cg2900_char_devs, ARRAY_SIZE(cg2900_char_devs),
+ NULL, 0);
+ if (err) {
+ dev_err(dev->dev, "Failed to add cg2900_char_devs (%d)\n", err);
+ goto err_handling_remove_devs;
+ }
+
+ main_info->cell_base_id += 30;
+ mutex_unlock(&main_info->man_mutex);
+
+ dev_info(dev->dev, "Chip supported by the CG2900 chip driver\n");
+
+ /* Finish by turning off the chip */
+ cg2900_create_work_item(info->wq, work_power_off_chip, dev);
+
+ return true;
+
+err_handling_remove_devs:
+ mfd_remove_devices(dev->dev);
+err_handling_free_settings_name:
+ kfree(info->settings_file_name);
+ mutex_unlock(&main_info->man_mutex);
+err_handling_free_patch_name:
+ kfree(info->patch_file_name);
+err_handling_destroy_wq:
+ destroy_workqueue(info->wq);
+err_handling_free_info:
+ kfree(info);
+ return false;
+}
+
+static struct cg2900_id_callbacks chip_support_callbacks = {
+ .check_chip_support = check_chip_support,
+};
+
+/**
+ * cg2900_chip_probe() - Initialize CG2900 chip handler resources.
+ * @pdev: Platform device.
+ *
+ * This function initializes the CG2900 driver, then registers to
+ * the CG2900 Core.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM for failed alloc or structure creation.
+ * Error codes generated by cg2900_register_chip_driver.
+ */
+static int __devinit cg2900_chip_probe(struct platform_device *pdev)
+{
+ int err;
+
+ dev_dbg(&pdev->dev, "cg2900_chip_probe\n");
+
+ main_info = kzalloc(sizeof(*main_info), GFP_ATOMIC);
+ if (!main_info) {
+ dev_err(&pdev->dev, "Couldn't allocate main_info\n");
+ return -ENOMEM;
+ }
+
+ main_info->dev = &pdev->dev;
+ mutex_init(&main_info->man_mutex);
+
+ err = cg2900_register_chip_driver(&chip_support_callbacks);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Couldn't register chip driver (%d)\n", err);
+ goto error_handling;
+ }
+
+ dev_info(&pdev->dev, "CG2900 chip driver started\n");
+
+ return 0;
+
+error_handling:
+ mutex_destroy(&main_info->man_mutex);
+ kfree(main_info);
+ main_info = NULL;
+ return err;
+}
+
+/**
+ * cg2900_chip_remove() - Release CG2900 chip handler resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success (always success).
+ */
+static int __devexit cg2900_chip_remove(struct platform_device *pdev)
+{
+ dev_info(&pdev->dev, "CG2900 chip driver removed\n");
+
+ cg2900_deregister_chip_driver(&chip_support_callbacks);
+
+ if (!main_info)
+ return 0;
+ mutex_destroy(&main_info->man_mutex);
+ kfree(main_info);
+ main_info = NULL;
+ return 0;
+}
+
+static struct platform_driver cg2900_chip_driver = {
+ .driver = {
+ .name = "cg2900-chip",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_chip_probe,
+ .remove = __devexit_p(cg2900_chip_remove),
+};
+
+/**
+ * cg2900_chip_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init cg2900_chip_init(void)
+{
+ pr_debug("cg2900_chip_init");
+ return platform_driver_register(&cg2900_chip_driver);
+}
+
+/**
+ * cg2900_chip_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit cg2900_chip_exit(void)
+{
+ pr_debug("cg2900_chip_exit");
+ platform_driver_unregister(&cg2900_chip_driver);
+}
+
+module_init(cg2900_chip_init);
+module_exit(cg2900_chip_exit);
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux CG2900 Connectivity Device Driver");
diff --git a/drivers/staging/cg2900/mfd/cg2900_chip.h b/drivers/staging/cg2900/mfd/cg2900_chip.h
new file mode 100644
index 0000000..8860159
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_chip.h
@@ -0,0 +1,613 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 GPS/BT/FM controller.
+ */
+
+#ifndef _CG2900_CHIP_H_
+#define _CG2900_CHIP_H_
+
+/*
+ * Utility
+ */
+
+static inline void set_low_nibble(__u8 *var, __u8 value)
+{
+ *var = (*var & 0xf0) | (value & 0x0f);
+}
+
+static inline void set_high_nibble(__u8 *var, __u8 value)
+{
+ *var = (*var & 0x0f) | (value << 4);
+}
+
+static inline void store_bit(__u8 *var, size_t bit, __u8 value)
+{
+ *var = (*var & ~(1u << bit)) | (value << bit);
+}
+
+/*
+ * General chip defines
+ */
+
+/* Supported chips */
+#define CG2900_SUPP_MANUFACTURER 0x30
+#define CG2900_SUPP_REVISION_MIN 0x0100
+#define CG2900_SUPP_REVISION_MAX 0x0200
+
+/* Specific chip version data */
+#define CG2900_PG1_REV 0x0101
+#define CG2900_PG2_REV 0x0200
+#define CG2900_PG1_SPECIAL_REV 0x0700
+
+/*
+ * Bluetooth
+ */
+
+#define BT_SIZE_OF_HDR (sizeof(__le16) + sizeof(__u8))
+#define BT_PARAM_LEN(__pkt_len) (__pkt_len - BT_SIZE_OF_HDR)
+
+struct bt_cmd_cmpl_event {
+ __u8 eventcode;
+ __u8 plen;
+ __u8 n_commands;
+ __le16 opcode;
+ /*
+ * According to BT-specification what follows is "parameters"
+ * and unique to every command, but all commands start the
+ * parameters with the status field so include it here for
+ * convenience
+ */
+ __u8 status;
+ __u8 data[];
+} __packed;
+
+/* BT VS Store In FS command */
+#define CG2900_BT_OP_VS_STORE_IN_FS 0xFC22
+struct bt_vs_store_in_fs_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 user_id;
+ __u8 len;
+ __u8 data[];
+} __packed;
+
+#define CG2900_VS_STORE_IN_FS_USR_ID_BD_ADDR 0xFE
+
+/* BT VS Write File Block command */
+#define CG2900_BT_OP_VS_WRITE_FILE_BLOCK 0xFC2E
+struct bt_vs_write_file_block_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 id;
+ __u8 data[];
+} __packed;
+
+#define CG2900_BT_DISABLE 0x00
+#define CG2900_BT_ENABLE 0x01
+
+/* BT VS BT Enable command */
+#define CG2900_BT_OP_VS_BT_ENABLE 0xFF10
+struct bt_vs_bt_enable_cmd {
+ __le16 op_code;
+ u8 plen;
+ u8 enable;
+} __packed;
+
+/* Bytes in the command Hci_Cmd_ST_Set_Uart_Baud_Rate */
+#define CG2900_BAUD_RATE_57600 0x03
+#define CG2900_BAUD_RATE_115200 0x02
+#define CG2900_BAUD_RATE_230400 0x01
+#define CG2900_BAUD_RATE_460800 0x00
+#define CG2900_BAUD_RATE_921600 0x20
+#define CG2900_BAUD_RATE_2000000 0x25
+#define CG2900_BAUD_RATE_3000000 0x27
+#define CG2900_BAUD_RATE_4000000 0x2B
+
+/* BT VS SetBaudRate command */
+#define CG2900_BT_OP_VS_SET_BAUD_RATE 0xFC09
+struct bt_vs_set_baud_rate_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 baud_rate;
+} __packed;
+
+#define CG2900_BT_SELFTEST_SUCCESSFUL 0x00
+#define CG2900_BT_SELFTEST_FAILED 0x01
+#define CG2900_BT_SELFTEST_NOT_COMPLETED 0x02
+
+/* BT VS ReadSelfTestsResult command & event */
+#define CG2900_BT_OP_VS_READ_SELTESTS_RESULT 0xFC10
+struct bt_vs_read_selftests_result_evt {
+ __u8 status;
+ __u8 result;
+} __packed;
+
+/* Bluetooth Vendor Specific Opcodes */
+#define CG2900_BT_OP_VS_POWER_SWITCH_OFF 0xFD40
+#define CG2900_BT_OP_VS_SYSTEM_RESET 0xFF12
+
+#define CG2900_BT_OPCODE_NONE 0xFFFF
+
+/*
+ * Common multimedia
+ */
+
+#define CG2900_CODEC_TYPE_NONE 0x00
+#define CG2900_CODEC_TYPE_SBC 0x01
+
+#define CG2900_PCM_MODE_SLAVE 0x00
+#define CG2900_PCM_MODE_MASTER 0x01
+
+#define CG2900_I2S_MODE_MASTER 0x00
+#define CG2900_I2S_MODE_SLAVE 0x01
+
+/*
+ * CG2900 PG1 multimedia API
+ */
+
+#define CG2900_BT_VP_TYPE_PCM 0x00
+#define CG2900_BT_VP_TYPE_I2S 0x01
+#define CG2900_BT_VP_TYPE_SLIMBUS 0x02
+#define CG2900_BT_VP_TYPE_FM 0x03
+#define CG2900_BT_VP_TYPE_BT_SCO 0x04
+#define CG2900_BT_VP_TYPE_BT_A2DP 0x05
+#define CG2900_BT_VP_TYPE_ANALOG 0x07
+
+#define CG2900_BT_VS_SET_HARDWARE_CONFIG 0xFD54
+/* These don't have the same length, so a union won't work */
+struct bt_vs_set_hw_cfg_cmd_pcm {
+ __le16 opcode;
+ __u8 plen;
+ __u8 vp_type;
+ __u8 port_id;
+ __u8 mode_dir; /* NB: mode is in bit 1 (not 0) */
+ __u8 bit_clock;
+ __le16 frame_len;
+} __packed;
+#define HWCONFIG_PCM_SET_MODE(pcfg, mode) \
+ set_low_nibble(&(pcfg)->mode_dir, (mode) << 1)
+#define HWCONFIG_PCM_SET_DIR(pcfg, idx, dir) \
+ store_bit(&(pcfg)->mode_dir, (idx) + 4, (dir))
+
+struct bt_vs_set_hw_cfg_cmd_i2s {
+ __le16 opcode;
+ __u8 plen;
+ __u8 vp_type;
+ __u8 port_id;
+ __u8 half_period;
+ __u8 master_slave;
+} __packed;
+
+/* Max length for allocating */
+#define CG2900_BT_LEN_VS_SET_HARDWARE_CONFIG \
+ (sizeof(struct bt_vs_set_hw_cfg_cmd_pcm))
+
+#define CG2900_BT_VS_SET_SESSION_CONFIG 0xFD55
+struct session_config_vport {
+ __u8 type;
+ union {
+ struct {
+ __le16 acl_handle;
+ __u8 reserved[10];
+ } sco;
+ struct {
+ __u8 reserved[12];
+ } fm;
+ struct {
+ __u8 index;
+ __u8 slots_used;
+ __u8 slot_start[4];
+ __u8 reserved[6];
+ } pcm;
+ struct {
+ __u8 index;
+ __u8 channel;
+ __u8 reserved[10];
+ } i2s;
+ };
+} __packed;
+#define SESSIONCFG_PCM_SET_USED(port, idx, use) \
+ store_bit(&(port).pcm.slots_used, (idx), (use))
+
+struct session_config_stream {
+ __u8 media_type;
+ __u8 csel_srate;
+ __u8 codec_type;
+ __u8 codec_mode;
+ __u8 codec_params[3];
+ struct session_config_vport inport;
+ struct session_config_vport outport;
+} __packed;
+#define SESSIONCFG_SET_CHANNELS(pcfg, chnl) \
+ set_low_nibble(&(pcfg)->csel_srate, (chnl))
+#define SESSIONCFG_I2S_SET_SRATE(pcfg, rate) \
+ set_high_nibble(&(pcfg)->csel_srate, (rate))
+
+struct bt_vs_session_config_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 n_streams; /* we only support one here */
+ struct session_config_stream stream;
+} __packed;
+
+#define CG2900_BT_SESSION_MEDIA_TYPE_AUDIO 0x00
+
+#define CG2900_BT_SESSION_RATE_8K 0x01
+#define CG2900_BT_SESSION_RATE_16K 0x02
+#define CG2900_BT_SESSION_RATE_44_1K 0x04
+#define CG2900_BT_SESSION_RATE_48K 0x05
+
+#define CG2900_BT_MEDIA_CONFIG_MONO 0x00
+#define CG2900_BT_MEDIA_CONFIG_STEREO 0x01
+#define CG2900_BT_MEDIA_CONFIG_JOINT_STEREO 0x02
+#define CG2900_BT_MEDIA_CONFIG_DUAL_CHANNEL 0x03
+
+#define CG2900_BT_SESSION_I2S_INDEX_I2S 0x00
+#define CG2900_BT_SESSION_PCM_INDEX_PCM_I2S 0x00
+
+
+#define CG2900_BT_VS_SESSION_CTRL 0xFD57
+struct bt_vs_session_ctrl_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 id;
+ __u8 control;
+} __packed;
+
+#define CG2900_BT_SESSION_START 0x00
+#define CG2900_BT_SESSION_STOP 0x01
+#define CG2900_BT_SESSION_PAUSE 0x02
+#define CG2900_BT_SESSION_RESUME 0x03
+
+#define CG2900_BT_VS_RESET_SESSION_CONFIG 0xFD56
+struct bt_vs_reset_session_cfg_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 id;
+} __packed;
+
+/*
+ * CG2900 PG2 multimedia API
+ */
+
+#define CG2900_MC_PORT_PCM_I2S 0x00
+#define CG2900_MC_PORT_I2S 0x01
+#define CG2900_MC_PORT_BT_SCO 0x04
+#define CG2900_MC_PORT_FM_RX_0 0x07
+#define CG2900_MC_PORT_FM_RX_1 0x08
+#define CG2900_MC_PORT_FM_TX 0x09
+
+#define CG2900_MC_VS_PORT_CONFIG 0xFD64
+struct mc_vs_port_cfg_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 type;
+ /*
+ * one of the following configuration structs should follow, but they
+ * have different lengths so a union will not work
+ */
+} __packed;
+
+struct mc_vs_port_cfg_pcm_i2s {
+ __u8 role_dir;
+ __u8 sco_a2dp_slots_used;
+ __u8 fm_slots_used;
+ __u8 ring_slots_used;
+ __u8 slot_start[4];
+ __u8 ratio_mode;
+ __u8 frame_len;
+ __u8 bitclk_srate;
+} __packed;
+#define PORTCFG_PCM_SET_ROLE(cfg, role) \
+ set_low_nibble(&(cfg).role_dir, (role))
+#define PORTCFG_PCM_SET_DIR(cfg, idx, dir) \
+ store_bit(&(cfg).role_dir, (idx) + 4, (dir))
+static inline void portcfg_pcm_set_sco_used(struct mc_vs_port_cfg_pcm_i2s *cfg,
+ size_t index, __u8 use)
+{
+ if (use) {
+ /* clear corresponding slot in all cases */
+ cfg->sco_a2dp_slots_used &= ~(0x11 << index);
+ cfg->fm_slots_used &= ~(0x11 << index);
+ cfg->ring_slots_used &= ~(0x11 << index);
+ /* set for sco */
+ cfg->sco_a2dp_slots_used |= (1u << index);
+ } else {
+ /* only clear for sco */
+ cfg->sco_a2dp_slots_used &= ~(1u << index);
+ }
+}
+#define PORTCFG_PCM_SET_SCO_USED(cfg, idx, use) \
+ portcfg_pcm_set_sco_used(&cfg, idx, use)
+#define PORTCFG_PCM_SET_RATIO(cfg, r) \
+ set_low_nibble(&(cfg).ratio_mode, (r))
+#define PORTCFG_PCM_SET_MODE(cfg, mode) \
+ set_high_nibble(&(cfg).ratio_mode, (mode))
+#define PORTCFG_PCM_SET_BITCLK(cfg, clk) \
+ set_low_nibble(&(cfg).bitclk_srate, (clk))
+#define PORTCFG_PCM_SET_SRATE(cfg, rate) \
+ set_high_nibble(&(cfg).bitclk_srate, (rate))
+
+#define CG2900_MC_PCM_SAMPLE_RATE_8 1
+#define CG2900_MC_PCM_SAMPLE_RATE_16 2
+#define CG2900_MC_PCM_SAMPLE_RATE_44_1 4
+#define CG2900_MC_PCM_SAMPLE_RATE_48 6
+
+struct mc_vs_port_cfg_i2s {
+ __u8 role_hper;
+ __u8 csel_srate;
+ __u8 wordlen;
+};
+#define PORTCFG_I2S_SET_ROLE(cfg, role) \
+ set_low_nibble(&(cfg).role_hper, (role))
+#define PORTCFG_I2S_SET_HALFPERIOD(cfg, hper) \
+ set_high_nibble(&(cfg).role_hper, (hper))
+#define PORTCFG_I2S_SET_CHANNELS(cfg, chnl) \
+ set_low_nibble(&(cfg).csel_srate, (chnl))
+#define PORTCFG_I2S_SET_SRATE(cfg, rate) \
+ set_high_nibble(&(cfg).csel_srate, (rate))
+#define PORTCFG_I2S_SET_WORDLEN(cfg, len) \
+ set_low_nibble(&(cfg).wordlen, len)
+
+#define CG2900_MC_I2S_RIGHT_CHANNEL 1
+#define CG2900_MC_I2S_LEFT_CHANNEL 2
+#define CG2900_MC_I2S_BOTH_CHANNELS 3
+
+#define CG2900_MC_I2S_SAMPLE_RATE_8 0
+#define CG2900_MC_I2S_SAMPLE_RATE_16 1
+#define CG2900_MC_I2S_SAMPLE_RATE_44_1 2
+#define CG2900_MC_I2S_SAMPLE_RATE_48 4
+
+#define CG2900_MC_I2S_WORD_16 1
+#define CG2900_MC_I2S_WORD_32 3
+
+struct mc_vs_port_cfg_fm {
+ __u8 srate; /* NB: value goes in _upper_ nibble! */
+};
+#define PORTCFG_FM_SET_SRATE(cfg, rate) \
+ set_high_nibble(&(cfg).srate, (rate))
+
+struct mc_vs_port_cfg_sco {
+ __le16 acl_id;
+ __u8 wbs_codec;
+ __u8 sbc_params[3]; /* replace when we actually enable WBS... */
+} __packed;
+#define PORTCFG_SCO_SET_WBS(cfg, wbs) \
+ set_low_nibble(&(cfg).wbs_codec, (wbs))
+#define PORTCFG_SCO_SET_CODEC(cfg, codec) \
+ set_high_nibble(&(cfg).wbs_codec, (codec))
+
+#define CG2900_MC_VS_CREATE_STREAM 0xFD66
+struct mc_vs_create_stream_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 id;
+ __u8 inport;
+ __u8 outport;
+ __u8 order; /* NB: not used by chip */
+} __packed;
+
+#define CG2900_MC_VS_DELETE_STREAM 0xFD67
+struct mc_vs_delete_stream_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 stream;
+} __packed;
+
+#define CG2900_MC_VS_STREAM_CONTROL 0xFD68
+struct mc_vs_stream_ctrl_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 command;
+ __u8 n_streams;
+ __u8 stream[];
+} __packed;
+
+#define CG2900_MC_STREAM_START 0x00
+#define CG2900_MC_STREAM_STOP 0x01
+#define CG2900_MC_STREAM_STOP_FLUSH 0x02
+
+#define CG2900_MC_VS_SET_FM_START_MODE 0xFD69
+
+/*
+ * FM
+ */
+
+/* FM legacy command packet */
+struct fm_leg_cmd {
+ __u8 length;
+ __u8 opcode;
+ __u8 read_write;
+ __u8 fm_function;
+ union { /* Payload varies with function */
+ __le16 irqmask;
+ struct fm_leg_fm_cmd {
+ __le16 head;
+ __le16 data[];
+ } fm_cmd;
+ };
+} __packed;
+
+/* FM legacy command complete packet */
+struct fm_leg_cmd_cmpl {
+ __u8 param_length;
+ __u8 status;
+ __u8 opcode;
+ __u8 read_write;
+ __u8 cmd_status;
+ __u8 fm_function;
+ __le16 response_head;
+ __le16 data[];
+} __packed;
+
+/* FM legacy interrupt packet, PG2 style */
+struct fm_leg_irq_v2 {
+ __u8 param_length;
+ __u8 status;
+ __u8 opcode;
+ __u8 event_type;
+ __u8 event_id;
+ __le16 irq;
+} __packed;
+
+/* FM legacy interrupt packet, PG1 style */
+struct fm_leg_irq_v1 {
+ __u8 param_length;
+ __u8 opcode;
+ __u8 event_id;
+ __le16 irq;
+} __packed;
+
+union fm_leg_evt_or_irq {
+ __u8 param_length;
+ struct fm_leg_cmd_cmpl evt;
+ struct fm_leg_irq_v2 irq_v2;
+ struct fm_leg_irq_v1 irq_v1;
+} __packed;
+
+/* FM Opcode generic*/
+#define CG2900_FM_GEN_ID_LEGACY 0xFE
+
+/* FM event*/
+#define CG2900_FM_EVENT_UNKNOWN 0
+#define CG2900_FM_EVENT_CMD_COMPLETE 1
+#define CG2900_FM_EVENT_INTERRUPT 2
+
+/* FM do-command identifiers. */
+#define CG2900_FM_DO_AIP_FADE_START 0x0046
+#define CG2900_FM_DO_AUP_BT_FADE_START 0x01C2
+#define CG2900_FM_DO_AUP_EXT_FADE_START 0x0102
+#define CG2900_FM_DO_AUP_FADE_START 0x00A2
+#define CG2900_FM_DO_FMR_SETANTENNA 0x0663
+#define CG2900_FM_DO_FMR_SP_AFSWITCH_START 0x04A3
+#define CG2900_FM_DO_FMR_SP_AFUPDATE_START 0x0463
+#define CG2900_FM_DO_FMR_SP_BLOCKSCAN_START 0x0683
+#define CG2900_FM_DO_FMR_SP_PRESETPI_START 0x0443
+#define CG2900_FM_DO_FMR_SP_SCAN_START 0x0403
+#define CG2900_FM_DO_FMR_SP_SEARCH_START 0x03E3
+#define CG2900_FM_DO_FMR_SP_SEARCHPI_START 0x0703
+#define CG2900_FM_DO_FMR_SP_TUNE_SETCHANNEL 0x03C3
+#define CG2900_FM_DO_FMR_SP_TUNE_STEPCHANNEL 0x04C3
+#define CG2900_FM_DO_FMT_PA_SETCTRL 0x01A4
+#define CG2900_FM_DO_FMT_PA_SETMODE 0x01E4
+#define CG2900_FM_DO_FMT_SP_TUNE_SETCHANNEL 0x0064
+#define CG2900_FM_DO_GEN_ANTENNACHECK_START 0x02A1
+#define CG2900_FM_DO_GEN_GOTOMODE 0x0041
+#define CG2900_FM_DO_GEN_POWERSUPPLY_SETMODE 0x0221
+#define CG2900_FM_DO_GEN_SELECTREFERENCECLOCK 0x0201
+#define CG2900_FM_DO_GEN_SETPROCESSINGCLOCK 0x0241
+#define CG2900_FM_DO_GEN_SETREFERENCECLOCKPLL 0x01A1
+#define CG2900_FM_DO_TST_TX_RAMP_START 0x0147
+#define CG2900_FM_CMD_NONE 0xFFFF
+#define CG2900_FM_CMD_ID_GEN_GOTO_POWER_DOWN 0x0081
+#define CG2900_FM_CMD_ID_GEN_GOTO_STANDBY 0x0061
+
+/* FM Command IDs */
+#define CG2900_FM_CMD_ID_AUP_EXT_SET_MODE 0x0162
+#define CG2900_FM_CMD_ID_AUP_EXT_SET_CTRL 0x0182
+#define CG2900_FM_CMD_ID_AIP_SET_MODE 0x01C6
+#define CG2900_FM_CMD_ID_AIP_BT_SET_CTRL 0x01A6
+#define CG2900_FM_CMD_ID_AIP_BT_SET_MODE 0x01E6
+
+/* FM Command Parameters. */
+#define CG2900_FM_CMD_PARAM_ENABLE 0x00
+#define CG2900_FM_CMD_PARAM_DISABLE 0x01
+#define CG2900_FM_CMD_PARAM_RESET 0x02
+#define CG2900_FM_CMD_PARAM_WRITECOMMAND 0x10
+#define CG2900_FM_CMD_PARAM_SET_INT_MASK_ALL 0x20
+#define CG2900_FM_CMD_PARAM_GET_INT_MASK_ALL 0x21
+#define CG2900_FM_CMD_PARAM_SET_INT_MASK 0x22
+#define CG2900_FM_CMD_PARAM_GET_INT_MASK 0x23
+#define CG2900_FM_CMD_PARAM_FM_FW_DOWNLOAD 0x30
+#define CG2900_FM_CMD_PARAM_NONE 0xFF
+
+/* FM Legacy Command Parameters */
+#define CG2900_FM_CMD_LEG_PARAM_WRITE 0x00
+#define CG2900_FM_CMD_LEG_PARAM_IRQ 0x01
+
+/* FM Command Status. */
+#define CG2900_FM_CMD_STATUS_COMMAND_SUCCEEDED 0x00
+#define CG2900_FM_CMD_STATUS_HW_FAILURE 0x03
+#define CG2900_FM_CMD_STATUS_INVALID_PARAMS 0x12
+#define CG2900_FM_CMD_STATUS_UNINITILIZED 0x15
+#define CG2900_FM_CMD_STATUS_UNSPECIFIED_ERROR 0x1F
+#define CG2900_FM_CMD_STATUS_COMMAND_DISALLOWED 0x0C
+#define CG2900_FM_CMD_STATUS_FW_WRONG_SEQUENCE_NR 0xF1
+#define CG2900_FM_CMD_STATUS_FW_UNKNOWN_FILE 0xF2
+#define CG2900_FM_CMD_STATUS_FW_FILE_VER_MISMATCH 0xF3
+
+/* FM Interrupts. */
+#define CG2900_FM_IRPT_FIQ 0x0000
+#define CG2900_FM_IRPT_OPERATION_SUCCEEDED 0x0001
+#define CG2900_FM_IRPT_OPERATION_FAILED 0x0002
+#define CG2900_FM_IRPT_BUFFER_FULL 0x0008
+#define CG2900_FM_IRPT_BUFFER_EMPTY 0x0008
+#define CG2900_FM_IRPT_SIGNAL_QUALITY_LOW 0x0010
+#define CG2900_FM_IRPT_MUTE_STATUS_CHANGED 0x0010
+#define CG2900_FM_IRPT_MONO_STEREO_TRANSITION 0x0020
+#define CG2900_FM_IRPT_OVER_MODULATION 0x0020
+#define CG2900_FM_IRPT_RDS_SYNC_FOUND 0x0040
+#define CG2900_FM_IRPT_INPUT_OVERDRIVE 0x0040
+#define CG2900_FM_IRPT_RDS_SYNC_LOST 0x0080
+#define CG2900_FM_IRPT_PI_CODE_CHANGED 0x0100
+#define CG2900_FM_IRPT_REQUEST_BLOCK_AVALIBLE 0x0200
+#define CG2900_FM_IRPT_BUFFER_CLEARED 0x2000
+#define CG2900_FM_IRPT_WARM_BOOT_READY 0x4000
+#define CG2900_FM_IRPT_COLD_BOOT_READY 0x8000
+
+/* FM Legacy Function Command Parameters */
+
+/* AUP_EXT_SetMode Output enum */
+#define CG2900_FM_CMD_AUP_EXT_SET_MODE_DISABLED 0x0000
+#define CG2900_FM_CMD_AUP_EXT_SET_MODE_I2S 0x0001
+#define CG2900_FM_CMD_AUP_EXT_SET_MODE_PARALLEL 0x0002
+
+/* SetControl Conversion enum */
+#define CG2900_FM_CMD_SET_CTRL_CONV_UP 0x0000
+#define CG2900_FM_CMD_SET_CTRL_CONV_DOWN 0x0001
+
+/* AIP_SetMode Input enum */
+#define CG2900_FM_CMD_AIP_SET_MODE_INPUT_ANA 0x0000
+#define CG2900_FM_CMD_AIP_SET_MODE_INPUT_DIG 0x0001
+
+/* AIP_BT_SetMode Input enum */
+#define CG2900_FM_CMD_AIP_BT_SET_MODE_INPUT_RESERVED 0x0000
+#define CG2900_FM_CMD_AIP_BT_SET_MODE_INPUT_I2S 0x0001
+#define CG2900_FM_CMD_AIP_BT_SET_MODE_INPUT_PAR 0x0002
+#define CG2900_FM_CMD_AIP_BT_SET_MODE_INPUT_FIFO 0x0003
+
+/* FM Parameter Lengths = FM command length - length field (1 byte) */
+#define CG2900_FM_CMD_PARAM_LEN(len) (len - 1)
+
+/*
+ * FM Command ID mapped per byte and shifted 3 bits left
+ * Also adds number of parameters at first 3 bits of LSB.
+ */
+static inline __u16 cg2900_get_fm_cmd_id(__u16 opcode)
+{
+ return opcode >> 3;
+}
+
+static inline __u16 cg2900_make_fm_cmd_id(__u16 id, __u8 num_params)
+{
+ return (id << 3) | num_params;
+}
+
+/*
+ * GNSS
+ */
+
+struct gnss_hci_hdr {
+ __u8 op_code;
+ __le16 plen;
+} __packed;
+
+#endif /* _CG2900_CHIP_H_ */
diff --git a/drivers/staging/cg2900/mfd/cg2900_core.c b/drivers/staging/cg2900/mfd/cg2900_core.c
new file mode 100644
index 0000000..66a452f
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_core.c
@@ -0,0 +1,713 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 GPS/BT/FM controller.
+ */
+#define NAME "cg2900_core"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <asm/byteorder.h>
+#include <linux/firmware.h>
+#include <linux/fs.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/stat.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/core.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+
+#include "cg2900.h"
+#include "cg2900_core.h"
+
+/* Device names */
+#define CG2900_CDEV_NAME "cg2900_core_test"
+#define CG2900_CLASS_NAME "cg2900_class"
+#define CG2900_DEVICE_NAME "cg2900_driver"
+#define CORE_WQ_NAME "cg2900_core_wq"
+
+#define LOGGER_DIRECTION_TX 0
+#define LOGGER_DIRECTION_RX 1
+
+/*
+ * Timeout values
+ */
+#define CHIP_READY_TIMEOUT (100) /* ms */
+#define REVISION_READOUT_TIMEOUT (500) /* ms */
+#define SLEEP_TIMEOUT_MS (10000) /* ms */
+
+/**
+ * enum boot_state - BOOT-state for CG2900 Core.
+ * @BOOT_RESET: HCI Reset has been sent.
+ * @BOOT_READ_LOCAL_VERSION_INFORMATION: ReadLocalVersionInformation
+ * command has been sent.
+ * @BOOT_READY: CG2900 Core boot is ready.
+ * @BOOT_FAILED: CG2900 Core boot failed.
+ */
+enum boot_state {
+ BOOT_RESET,
+ BOOT_READ_LOCAL_VERSION_INFORMATION,
+ BOOT_READY,
+ BOOT_FAILED
+};
+
+/**
+ * struct chip_handler_item - Structure to store chip handler cb.
+ * @list: list_head struct.
+ * @cb: Chip handler callback struct.
+ */
+struct chip_handler_item {
+ struct list_head list;
+ struct cg2900_id_callbacks cb;
+};
+
+/**
+ * struct core_info - Main info structure for CG2900 Core.
+ * @boot_state: Current BOOT-state of CG2900 Core.
+ * @wq: CG2900 Core workqueue.
+ * @chip_dev: Device structure for chip driver.
+ * @work: Work structure.
+ */
+struct core_info {
+ enum boot_state boot_state;
+ struct workqueue_struct *wq;
+ struct cg2900_chip_dev *chip_dev;
+ struct work_struct work;
+};
+
+/**
+ * struct main_info - Main info structure for CG2900 Core.
+ * @dev: Device structure for STE Connectivity driver.
+ * @man_mutex: Management mutex.
+ * @chip_handlers: List of the register handlers for different chips.
+ * @wq: Wait queue.
+ */
+struct main_info {
+ struct device *dev;
+ struct mutex man_mutex;
+ struct list_head chip_handlers;
+ wait_queue_head_t wq;
+};
+
+/* core_info - Main information object for CG2900 Core. */
+static struct main_info *main_info;
+
+/* Module parameters */
+u8 bd_address[] = {0x00, 0xBE, 0xAD, 0xDE, 0x80, 0x00};
+EXPORT_SYMBOL_GPL(bd_address);
+int bd_addr_count = BT_BDADDR_SIZE;
+
+static int sleep_timeout_ms = SLEEP_TIMEOUT_MS;
+
+/**
+ * send_bt_cmd() - Copy and send sk_buffer with no assigned user.
+ * @dev: Current chip to transmit to.
+ * @data: Data to send.
+ * @length: Length in bytes of data.
+ *
+ * The send_bt_cmd() function allocate sk_buffer, copy supplied
+ * data to it, and send the sk_buffer to controller.
+ */
+void send_bt_cmd(struct cg2900_chip_dev *dev, void *data, int length)
+{
+ struct sk_buff *skb;
+ int err;
+
+ skb = alloc_skb(length + HCI_H4_SIZE, GFP_ATOMIC);
+ if (!skb) {
+ dev_err(dev->dev, "send_bt_cmd: Couldn't alloc sk_buff with "
+ "length %d\n", length);
+ return;
+ }
+
+ skb_reserve(skb, HCI_H4_SIZE);
+ memcpy(skb_put(skb, length), data, length);
+ skb_push(skb, HCI_H4_SIZE);
+ skb->data[0] = HCI_BT_CMD_H4_CHANNEL;
+
+ err = dev->t_cb.write(dev, skb);
+ if (err) {
+ dev_err(dev->dev, "send_bt_cmd: Transport write failed (%d)\n",
+ err);
+ kfree_skb(skb);
+ }
+}
+
+/**
+ * handle_reset_cmd_complete_evt() - Handle a received HCI Command Complete event for a Reset command.
+ * @dev: Current device.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * True, if packet was handled internally,
+ * False, otherwise.
+ */
+static bool handle_reset_cmd_complete_evt(struct cg2900_chip_dev *dev, u8 *data)
+{
+ bool pkt_handled = false;
+ u8 status = data[0];
+ struct hci_command_hdr cmd;
+ struct core_info *info = dev->prv_data;
+
+ dev_dbg(dev->dev, "Received Reset complete event with status 0x%X\n",
+ status);
+
+ if (info->boot_state == BOOT_RESET) {
+ /* Transmit HCI Read Local Version Information command */
+ dev_dbg(dev->dev, "New boot_state: "
+ "BOOT_READ_LOCAL_VERSION_INFORMATION\n");
+ info->boot_state = BOOT_READ_LOCAL_VERSION_INFORMATION;
+ cmd.opcode = cpu_to_le16(HCI_OP_READ_LOCAL_VERSION);
+ cmd.plen = 0; /* No parameters for HCI reset */
+ send_bt_cmd(dev, &cmd, sizeof(cmd));
+
+ pkt_handled = true;
+ }
+
+ return pkt_handled;
+}
+
+/**
+ * handle_read_local_version_info_cmd_complete_evt() - Handle a received HCI Command Complete event for a ReadLocalVersionInformation command.
+ * @dev: Current device.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * True, if packet was handled internally,
+ * False, otherwise.
+ */
+static bool
+handle_read_local_version_info_cmd_complete_evt(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ struct hci_rp_read_local_version *evt;
+ struct core_info *info = dev->prv_data;
+
+ /* Check we're in the right state */
+ if (info->boot_state != BOOT_READ_LOCAL_VERSION_INFORMATION)
+ return false;
+
+ /* We got an answer for our HCI command. Extract data */
+ evt = (struct hci_rp_read_local_version *)data;
+
+ /* We will handle the packet */
+ if (HCI_BT_ERROR_NO_ERROR != evt->status) {
+ dev_err(dev->dev, "Received Read Local Version Information "
+ "with status 0x%X\n", evt->status);
+ dev_dbg(dev->dev, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ wake_up_all(&main_info->wq);
+ return true;
+ }
+
+ /* The command worked. Store the data */
+ dev->chip.hci_version = evt->hci_ver;
+ dev->chip.hci_revision = le16_to_cpu(evt->hci_rev);
+ dev->chip.lmp_pal_version = evt->lmp_ver;
+ dev->chip.manufacturer = le16_to_cpu(evt->manufacturer);
+ dev->chip.hci_sub_version = le16_to_cpu(evt->lmp_subver);
+ dev_info(dev->dev, "Received Read Local Version Information with:\n"
+ "\thci_version: 0x%02X\n"
+ "\thci_revision: 0x%04X\n"
+ "\tlmp_pal_version: 0x%02X\n"
+ "\tmanufacturer: 0x%04X\n"
+ "\thci_sub_version: 0x%04X\n",
+ dev->chip.hci_version, dev->chip.hci_revision,
+ dev->chip.lmp_pal_version, dev->chip.manufacturer,
+ dev->chip.hci_sub_version);
+
+ dev_dbg(dev->dev, "New boot_state: BOOT_READY\n");
+ info->boot_state = BOOT_READY;
+ wake_up_all(&main_info->wq);
+
+ return true;
+}
+
+/**
+ * handle_rx_data_bt_evt() - Check if data should be handled in CG2900 Core.
+ * @dev: Current chip
+ * @skb: Data packet
+ *
+ * The handle_rx_data_bt_evt() function checks if received data should be
+ * handled in CG2900 Core. If so handle it correctly.
+ * Received data is always HCI BT Event.
+ *
+ * Returns:
+ * True, if packet was handled internally,
+ * False, otherwise.
+ */
+static bool handle_rx_data_bt_evt(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb)
+{
+ bool pkt_handled = false;
+ u8 *data = &skb->data[CG2900_SKB_RESERVE];
+ struct hci_event_hdr *evt;
+ struct hci_ev_cmd_complete *cmd_complete;
+ u16 op_code;
+
+ evt = (struct hci_event_hdr *)data;
+
+ /* First check the event code */
+ if (HCI_EV_CMD_COMPLETE != evt->evt)
+ return false;
+
+ data += sizeof(*evt);
+ cmd_complete = (struct hci_ev_cmd_complete *)data;
+
+ op_code = le16_to_cpu(cmd_complete->opcode);
+
+ dev_dbg(dev->dev, "Received Command Complete: op_code = 0x%04X\n",
+ op_code);
+ data += sizeof(*cmd_complete); /* Move to first byte after OCF */
+
+ if (op_code == HCI_OP_RESET)
+ pkt_handled = handle_reset_cmd_complete_evt(dev, data);
+ else if (op_code == HCI_OP_READ_LOCAL_VERSION)
+ pkt_handled = handle_read_local_version_info_cmd_complete_evt
+ (dev, data);
+
+ if (pkt_handled)
+ kfree_skb(skb);
+
+ return pkt_handled;
+}
+
+static void cg2900_data_from_chip(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb)
+{
+ u8 h4_channel;
+
+ dev_dbg(dev->dev, "cg2900_data_from_chip\n");
+
+ if (!skb) {
+ dev_err(dev->dev, "No data supplied\n");
+ return;
+ }
+
+ h4_channel = skb->data[0];
+
+ /*
+ * First check if this is the response for something
+ * we have sent internally.
+ */
+ if (HCI_BT_EVT_H4_CHANNEL == h4_channel &&
+ handle_rx_data_bt_evt(dev, skb)) {
+ dev_dbg(dev->dev, "Received packet handled internally\n");
+ } else {
+ dev_err(dev->dev,
+ "cg2900_data_from_chip: Received unexpected packet\n");
+ kfree_skb(skb);
+ }
+}
+
+/**
+ * work_hw_registered() - Called when the interface to HW has been established.
+ * @work: Reference to work data.
+ *
+ * Since there now is a transport identify the connected chip and decide which
+ * chip handler to use.
+ */
+static void work_hw_registered(struct work_struct *work)
+{
+ struct hci_command_hdr cmd;
+ struct cg2900_chip_dev *dev;
+ struct core_info *info;
+ bool chip_handled = false;
+ struct list_head *cursor;
+ struct chip_handler_item *tmp;
+
+ dev_dbg(main_info->dev, "work_hw_registered\n");
+
+ if (!work) {
+ dev_err(main_info->dev, "work_hw_registered: work == NULL\n");
+ return;
+ }
+
+ info = container_of(work, struct core_info, work);
+ dev = info->chip_dev;
+
+ /*
+ * This might look strange, but we need to read out
+ * the revision info in order to be able to shutdown the chip properly.
+ */
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, true);
+
+ /* Wait 100ms before continuing to be sure that the chip is ready */
+ schedule_timeout_killable(msecs_to_jiffies(CHIP_READY_TIMEOUT));
+
+ /* Set our function to receive data from chip */
+ dev->c_cb.data_from_chip = cg2900_data_from_chip;
+
+ /*
+ * Transmit HCI reset command to ensure the chip is using
+ * the correct transport
+ */
+ dev_dbg(dev->dev, "New boot_state: BOOT_RESET\n");
+ info->boot_state = BOOT_RESET;
+ cmd.opcode = cpu_to_le16(HCI_OP_RESET);
+ cmd.plen = 0; /* No parameters for HCI reset */
+ send_bt_cmd(dev, &cmd, sizeof(cmd));
+
+ dev_dbg(dev->dev,
+ "Wait up to 500 milliseconds for revision to be read\n");
+ wait_event_timeout(main_info->wq,
+ (BOOT_READY == info->boot_state ||
+ BOOT_FAILED == info->boot_state),
+ msecs_to_jiffies(REVISION_READOUT_TIMEOUT));
+
+ if (BOOT_READY != info->boot_state) {
+ dev_err(dev->dev,
+ "Could not read out revision from the chip\n");
+ return;
+ }
+
+ dev->c_cb.data_from_chip = NULL;
+
+ mutex_lock(&main_info->man_mutex);
+ list_for_each(cursor, &main_info->chip_handlers) {
+ tmp = list_entry(cursor, struct chip_handler_item, list);
+ chip_handled = tmp->cb.check_chip_support(dev);
+ if (chip_handled) {
+ dev_info(dev->dev, "Chip handler found\n");
+ break;
+ }
+ }
+ mutex_unlock(&main_info->man_mutex);
+
+ if (!chip_handled)
+ dev_info(dev->dev, "No chip handler found\n");
+}
+
+/**
+ * cg2900_register_chip_driver() - Register a chip handler.
+ * @cb: Callbacks to call when chip is connected.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if NULL is supplied as @cb.
+ * -ENOMEM if allocation fails or work queue can't be created.
+ */
+int cg2900_register_chip_driver(struct cg2900_id_callbacks *cb)
+{
+ struct chip_handler_item *item;
+
+ dev_dbg(main_info->dev, "cg2900_register_chip_driver\n");
+
+ if (!cb) {
+ dev_err(main_info->dev, "NULL supplied as cb\n");
+ return -EINVAL;
+ }
+
+ item = kzalloc(sizeof(*item), GFP_KERNEL);
+ if (!item) {
+ dev_err(main_info->dev,
+ "cg2900_register_chip_driver: "
+ "Failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ memcpy(&item->cb, cb, sizeof(cb));
+ mutex_lock(&main_info->man_mutex);
+ list_add_tail(&item->list, &main_info->chip_handlers);
+ mutex_unlock(&main_info->man_mutex);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cg2900_register_chip_driver);
+
+/**
+ * cg2900_deregister_chip_driver() - Deregister a chip handler.
+ * @cb: Callbacks to call when chip is connected.
+ */
+void cg2900_deregister_chip_driver(struct cg2900_id_callbacks *cb)
+{
+ struct chip_handler_item *tmp;
+ struct list_head *cursor, *next;
+
+ dev_dbg(main_info->dev, "cg2900_deregister_chip_driver\n");
+
+ if (!cb) {
+ dev_err(main_info->dev, "NULL supplied as cb\n");
+ return;
+ }
+ mutex_lock(&main_info->man_mutex);
+ list_for_each_safe(cursor, next, &main_info->chip_handlers) {
+ tmp = list_entry(cursor, struct chip_handler_item, list);
+ if (tmp->cb.check_chip_support == cb->check_chip_support) {
+ list_del(cursor);
+ kfree(tmp);
+ break;
+ }
+ }
+ mutex_unlock(&main_info->man_mutex);
+}
+EXPORT_SYMBOL_GPL(cg2900_deregister_chip_driver);
+
+/**
+ * cg2900_register_trans_driver() - Register a transport driver.
+ * @dev: Transport device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if NULL is supplied as @cb.
+ * -ENOMEM if allocation fails or work queue can't be created.
+ * -EACCES if work can't be queued.
+ */
+int cg2900_register_trans_driver(struct cg2900_chip_dev *dev)
+{
+ int err;
+ struct cg2900_platform_data *pf_data;
+ struct core_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!dev || !dev->dev) {
+ dev_err(main_info->dev, "cg2900_register_trans_driver: "
+ "Received NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(dev->dev, "cg2900_register_trans_driver\n");
+
+ if (!dev->t_cb.write) {
+ dev_err(dev->dev, "cg2900_register_trans_driver: Write function"
+ " missing\n");
+ return -EINVAL;
+ }
+
+ pf_data = dev_get_platdata(dev->dev);
+ if (!pf_data) {
+ dev_err(dev->dev, "cg2900_register_trans_driver: Missing "
+ "platform data\n");
+ return -EINVAL;
+ }
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(dev->dev, "Couldn't allocate info\n");
+ return -ENOMEM;
+ }
+
+ if (pf_data->init) {
+ err = pf_data->init(dev);
+ if (err) {
+ dev_err(dev->dev, "Platform init failed (%d)\n", err);
+ goto error_handling;
+ }
+ }
+
+ info->chip_dev = dev;
+ dev->prv_data = info;
+
+ info->wq = create_singlethread_workqueue(CORE_WQ_NAME);
+ if (!info->wq) {
+ dev_err(dev->dev, "Could not create workqueue\n");
+ err = -ENOMEM;
+ goto error_handling_exit;
+ }
+
+ dev_info(dev->dev, "Transport connected\n");
+
+ INIT_WORK(&info->work, work_hw_registered);
+ if (!queue_work(info->wq, &info->work)) {
+ dev_err(dev->dev, "Failed to queue work_hw_registered because "
+ "it's already in the queue\n");
+ err = -EACCES;
+ goto error_handling_wq;
+ }
+
+ return 0;
+
+error_handling_wq:
+ destroy_workqueue(info->wq);
+error_handling_exit:
+ if (pf_data->exit)
+ pf_data->exit(dev);
+error_handling:
+ kfree(info);
+ return err;
+}
+EXPORT_SYMBOL_GPL(cg2900_register_trans_driver);
+
+/**
+ * cg2900_deregister_trans_driver() - Deregister a transport driver.
+ * @dev: Transport device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if NULL is supplied as @cb.
+ * -ENOMEM if allocation fails or work queue can't be created.
+ */
+int cg2900_deregister_trans_driver(struct cg2900_chip_dev *dev)
+{
+ struct cg2900_platform_data *pf_data;
+ struct core_info *info = dev->prv_data;
+
+ BUG_ON(!main_info);
+
+ dev_dbg(dev->dev, "cg2900_deregister_trans_driver\n");
+
+ if (dev->c_cb.chip_removed)
+ dev->c_cb.chip_removed(dev);
+
+ destroy_workqueue(info->wq);
+
+ dev->prv_data = NULL;
+ kfree(info);
+
+ dev_info(dev->dev, "Transport disconnected\n");
+
+ pf_data = dev_get_platdata(dev->dev);
+ if (!pf_data) {
+ dev_err(dev->dev, "Missing platform data\n");
+ return -EINVAL;
+ }
+
+ if (pf_data->exit)
+ pf_data->exit(dev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cg2900_deregister_trans_driver);
+
+/**
+ * cg2900_get_sleep_timeout() - Return sleep timeout in jiffies.
+ *
+ * Returns:
+ * Sleep timeout in jiffies. 0 means that sleep timeout shall not be used.
+ */
+unsigned long cg2900_get_sleep_timeout(void)
+{
+ if (!sleep_timeout_ms)
+ return 0;
+
+ return msecs_to_jiffies(sleep_timeout_ms);
+}
+EXPORT_SYMBOL_GPL(cg2900_get_sleep_timeout);
+
+/**
+ * cg2900_probe() - Initialize module.
+ *
+ * @pdev: Platform device.
+ *
+ * This function initialize the transport and CG2900 Core, then
+ * register to the transport framework.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM for failed alloc or structure creation.
+ */
+static int __devinit cg2900_probe(struct platform_device *pdev)
+{
+ dev_dbg(&pdev->dev, "cg2900_probe\n");
+
+ main_info = kzalloc(sizeof(*main_info), GFP_KERNEL);
+ if (!main_info) {
+ dev_err(&pdev->dev, "Couldn't allocate main_info\n");
+ return -ENOMEM;
+ }
+
+ main_info->dev = &pdev->dev;
+ mutex_init(&main_info->man_mutex);
+ INIT_LIST_HEAD(&main_info->chip_handlers);
+ init_waitqueue_head(&main_info->wq);
+
+ dev_info(&pdev->dev, "CG2900 Core driver started\n");
+
+ return 0;
+}
+
+/**
+ * cg2900_remove() - Remove module.
+ *
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM if core_info does not exist.
+ * -EINVAL if platform data does not exist in the device.
+ */
+static int __devexit cg2900_remove(struct platform_device *pdev)
+{
+ dev_dbg(&pdev->dev, "cg2900_remove\n");
+
+ kfree(main_info);
+ main_info = NULL;
+
+ dev_info(&pdev->dev, "CG2900 Core driver removed\n");
+
+ return 0;
+}
+
+static struct platform_driver cg2900_driver = {
+ .driver = {
+ .name = "cg2900",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_probe,
+ .remove = __devexit_p(cg2900_remove),
+};
+
+/**
+ * cg2900_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init cg2900_init(void)
+{
+ pr_debug("cg2900_init");
+ return platform_driver_register(&cg2900_driver);
+}
+
+/**
+ * cg2900_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit cg2900_exit(void)
+{
+ pr_debug("cg2900_exit");
+ platform_driver_unregister(&cg2900_driver);
+}
+
+module_init(cg2900_init);
+module_exit(cg2900_exit);
+
+module_param(sleep_timeout_ms, int, S_IRUGO | S_IWUSR | S_IWGRP);
+MODULE_PARM_DESC(sleep_timeout_ms,
+ "Sleep timeout for data transmissions:\n"
+ "\tDefault 10000 ms\n"
+ "\t0 = disable\n"
+ "\t>0 = sleep timeout in milliseconds");
+
+module_param_array(bd_address, byte, &bd_addr_count,
+ S_IRUGO | S_IWUSR | S_IWGRP);
+MODULE_PARM_DESC(bd_address,
+ "Bluetooth Device address. "
+ "Default 0x00 0x80 0xDE 0xAD 0xBE 0xEF. "
+ "Enter as comma separated value.");
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux Bluetooth HCI H:4 CG2900 Connectivity Device Driver");
diff --git a/drivers/staging/cg2900/mfd/cg2900_core.h b/drivers/staging/cg2900/mfd/cg2900_core.h
new file mode 100644
index 0000000..bdd951a
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_core.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 GPS/BT/FM controller.
+ */
+
+#ifndef _CG2900_CORE_H_
+#define _CG2900_CORE_H_
+
+#include <linux/device.h>
+#include <linux/skbuff.h>
+
+/* Reserve 1 byte for the HCI H:4 header */
+#define HCI_H4_SIZE 1
+#define CG2900_SKB_RESERVE HCI_H4_SIZE
+
+/* Number of bytes to reserve at start of sk_buffer when receiving packet */
+#define RX_SKB_RESERVE 8
+
+#define BT_BDADDR_SIZE 6
+
+/* Standardized Bluetooth H:4 channels */
+#define HCI_BT_CMD_H4_CHANNEL 0x01
+#define HCI_BT_ACL_H4_CHANNEL 0x02
+#define HCI_BT_SCO_H4_CHANNEL 0x03
+#define HCI_BT_EVT_H4_CHANNEL 0x04
+
+/* Default H4 channels which may change depending on connected controller */
+#define HCI_FM_RADIO_H4_CHANNEL 0x08
+#define HCI_GNSS_H4_CHANNEL 0x09
+
+/* Bluetooth error codes */
+#define HCI_BT_ERROR_NO_ERROR 0x00
+
+/* Bluetooth lengths */
+#define HCI_BT_SEND_FILE_MAX_CHUNK_SIZE 254
+
+#define LOGGER_DIRECTION_TX 0
+#define LOGGER_DIRECTION_RX 1
+
+/* module_param declared in cg2900_core.c */
+extern u8 bd_address[BT_BDADDR_SIZE];
+
+#endif /* _CG2900_CORE_H_ */
diff --git a/drivers/staging/cg2900/mfd/cg2900_lib.c b/drivers/staging/cg2900/mfd/cg2900_lib.c
new file mode 100644
index 0000000..cb8ad46
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_lib.c
@@ -0,0 +1,281 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 GPS/BT/FM controller.
+ */
+#define NAME "cg2900_lib"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/skbuff.h>
+#include <linux/types.h>
+
+#include "cg2900.h"
+#include "cg2900_chip.h"
+#include "cg2900_core.h"
+#include "cg2900_lib.h"
+
+/*
+ * Max length in bytes for line buffer used to parse settings and patch file.
+ * Must be max length of name plus characters used to define chip version.
+ */
+#define LINE_BUFFER_LENGTH (NAME_MAX + 30)
+#define LOGGER_HEADER_SIZE 1
+/**
+ * cg2900_tx_to_chip() - Transmit buffer to the transport.
+ * @user: User data for BT command channel.
+ * @logger: User data for logger channel.
+ * @skb: Data packet.
+ *
+ * The transmit_skb_to_chip() function transmit buffer to the transport.
+ * If enabled, copy the transmitted data to the HCI logger as well.
+ */
+void cg2900_tx_to_chip(struct cg2900_user_data *user,
+ struct cg2900_user_data *logger, struct sk_buff *skb)
+{
+ int err;
+ struct cg2900_chip_dev *chip_dev;
+
+ dev_dbg(user->dev, "cg2900_tx_to_chip %d bytes.\n", skb->len);
+
+ if (logger)
+ cg2900_send_to_hci_logger(logger, skb, LOGGER_DIRECTION_TX);
+
+ chip_dev = cg2900_get_prv(user);
+ err = chip_dev->t_cb.write(chip_dev, skb);
+ if (err) {
+ dev_err(user->dev, "cg2900_tx_to_chip: Transport write failed "
+ "(%d)\n", err);
+ kfree_skb(skb);
+ }
+}
+EXPORT_SYMBOL_GPL(cg2900_tx_to_chip);
+
+/**
+ * cg2900_tx_no_user() - Transmit buffer to the transport.
+ * @dev: Current chip to transmit to.
+ * @skb: Data packet.
+ *
+ * This function transmits buffer to the transport when no user exist (system
+ * startup for example).
+ */
+void cg2900_tx_no_user(struct cg2900_chip_dev *dev, struct sk_buff *skb)
+{
+ int err;
+
+ dev_dbg(dev->dev, "cg2900_tx_no_user %d bytes.\n", skb->len);
+
+ err = dev->t_cb.write(dev, skb);
+ if (err) {
+ dev_err(dev->dev, "cg2900_tx_no_user: Transport write failed "
+ "(%d)\n", err);
+ kfree_skb(skb);
+ }
+}
+EXPORT_SYMBOL_GPL(cg2900_tx_no_user);
+
+/**
+ * create_and_send_bt_cmd() - Copy and send sk_buffer.
+ * @user: User data for current channel.
+ * @logger: User data for logger channel.
+ * @data: Data to send.
+ * @length: Length in bytes of data.
+ *
+ * The create_and_send_bt_cmd() function allocate sk_buffer, copy supplied data
+ * to it, and send the sk_buffer to controller.
+ */
+void cg2900_send_bt_cmd(struct cg2900_user_data *user,
+ struct cg2900_user_data *logger,
+ void *data, int length)
+{
+ struct sk_buff *skb;
+
+ skb = user->alloc_skb(length, GFP_ATOMIC);
+ if (!skb) {
+ dev_err(user->dev, "cg2900_send_bt_cmd: Couldn't alloc "
+ "sk_buff with length %d\n", length);
+ return;
+ }
+
+ memcpy(skb_put(skb, length), data, length);
+ skb_push(skb, HCI_H4_SIZE);
+ skb->data[0] = HCI_BT_CMD_H4_CHANNEL;
+
+ cg2900_tx_to_chip(user, logger, skb);
+}
+EXPORT_SYMBOL_GPL(cg2900_send_bt_cmd);
+
+/**
+ * cg2900_send_bt_cmd_no_user() - Copy and send sk_buffer with no assigned user.
+ * @dev: Current chip to transmit to.
+ * @data: Data to send.
+ * @length: Length in bytes of data.
+ *
+ * The cg2900_send_bt_cmd_no_user() function allocate sk_buffer, copy supplied
+ * data to it, and send the sk_buffer to controller.
+ */
+void cg2900_send_bt_cmd_no_user(struct cg2900_chip_dev *dev, void *data,
+ int length)
+{
+ struct sk_buff *skb;
+
+ skb = alloc_skb(length + HCI_H4_SIZE, GFP_KERNEL);
+ if (!skb) {
+ dev_err(dev->dev, "cg2900_send_bt_cmd_no_user: Couldn't alloc "
+ "sk_buff with length %d\n", length);
+ return;
+ }
+
+ skb_reserve(skb, HCI_H4_SIZE);
+ memcpy(skb_put(skb, length), data, length);
+ skb_push(skb, HCI_H4_SIZE);
+ skb->data[0] = HCI_BT_CMD_H4_CHANNEL;
+
+ cg2900_tx_no_user(dev, skb);
+}
+EXPORT_SYMBOL_GPL(cg2900_send_bt_cmd_no_user);
+
+/**
+ * create_work_item() - Create work item and add it to the work queue.
+ * @wq: Work queue.
+ * @work_func: Work function.
+ * @user_data: Arbitrary data set by user.
+ *
+ * The create_work_item() function creates work item and add it to
+ * the work queue.
+ * Note that work is allocated by kmalloc and work must be freed when work
+ * function is started.
+ */
+void cg2900_create_work_item(struct workqueue_struct *wq, work_func_t work_func,
+ void *user_data)
+{
+ struct cg2900_work *new_work;
+ int err;
+
+ new_work = kmalloc(sizeof(*new_work), GFP_ATOMIC);
+ if (!new_work) {
+ pr_err("Failed to alloc memory for new_work");
+ return;
+ }
+
+ INIT_WORK(&new_work->work, work_func);
+ new_work->user_data = user_data;
+
+ err = queue_work(wq, &new_work->work);
+ if (!err) {
+ pr_err("Failed to queue work_struct because it's already "
+ "in the queue");
+ kfree(new_work);
+ }
+}
+EXPORT_SYMBOL_GPL(cg2900_create_work_item);
+
+/**
+ * read_and_send_file_part() - Transmit a part of the supplied file.
+ * @user: User data for current channel.
+ * @logger: User data for logger channel.
+ * @info: File information.
+ *
+ * The cg2900_read_and_send_file_part() function transmit a part of the supplied
+ * file to the controller.
+ *
+ * Returns:
+ * 0 if there is no more data in the file.
+ * >0 for number of bytes sent.
+ * -ENOMEM if skb allocation failed.
+ */
+int cg2900_read_and_send_file_part(struct cg2900_user_data *user,
+ struct cg2900_user_data *logger,
+ struct cg2900_file_info *info)
+{
+ int bytes_to_copy;
+ struct sk_buff *skb;
+ struct bt_vs_write_file_block_cmd *cmd;
+ int plen;
+
+ /*
+ * Calculate number of bytes to copy;
+ * either max bytes for HCI packet or number of bytes left in file
+ */
+ bytes_to_copy = min((int)HCI_BT_SEND_FILE_MAX_CHUNK_SIZE,
+ (int)(info->fw_file->size - info->file_offset));
+
+ if (bytes_to_copy <= 0) {
+ /* Nothing more to read in file. */
+ dev_dbg(user->dev, "File download finished\n");
+ info->chunk_id = 0;
+ info->file_offset = 0;
+ return 0;
+ }
+
+ /* There is more data to send */
+ plen = sizeof(*cmd) + bytes_to_copy;
+ skb = user->alloc_skb(plen, GFP_KERNEL);
+ if (!skb) {
+ dev_err(user->dev, "Couldn't allocate sk_buffer\n");
+ return -ENOMEM;
+ }
+
+ skb_put(skb, plen);
+
+ cmd = (struct bt_vs_write_file_block_cmd *)skb->data;
+ cmd->opcode = cpu_to_le16(CG2900_BT_OP_VS_WRITE_FILE_BLOCK);
+ cmd->plen = BT_PARAM_LEN(plen);
+ cmd->id = info->chunk_id;
+ info->chunk_id++;
+
+ /* Copy the data from offset position */
+ memcpy(cmd->data,
+ &(info->fw_file->data[info->file_offset]),
+ bytes_to_copy);
+
+ /* Increase offset with number of bytes copied */
+ info->file_offset += bytes_to_copy;
+
+ skb_push(skb, CG2900_SKB_RESERVE);
+ skb->data[0] = HCI_BT_CMD_H4_CHANNEL;
+
+ cg2900_tx_to_chip(user, logger, skb);
+
+ return bytes_to_copy;
+}
+EXPORT_SYMBOL_GPL(cg2900_read_and_send_file_part);
+
+void cg2900_send_to_hci_logger(struct cg2900_user_data *logger,
+ struct sk_buff *skb,
+ u8 direction)
+{
+ struct sk_buff *skb_log;
+ u8 *p;
+
+ /*
+ * Alloc a new sk_buff and copy the data into it. Then send it to
+ * the HCI logger.
+ */
+ skb_log = alloc_skb(skb->len + LOGGER_HEADER_SIZE, GFP_NOWAIT);
+ if (!skb_log) {
+ pr_err("cg2900_send_to_hci_logger:\
+ Couldn't allocate skb_log\n");
+ return;
+ }
+ /* Reserve 1 byte for direction.*/
+ skb_reserve(skb_log, LOGGER_HEADER_SIZE);
+
+ memcpy(skb_put(skb_log, skb->len), skb->data, skb->len);
+ p = skb_push(skb_log, LOGGER_HEADER_SIZE);
+ *p = (u8) direction;
+
+ if (logger->read_cb)
+ logger->read_cb(logger, skb_log);
+
+ return;
+}
+EXPORT_SYMBOL_GPL(cg2900_send_to_hci_logger);
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux CG2900 Library functions");
diff --git a/drivers/staging/cg2900/mfd/cg2900_lib.h b/drivers/staging/cg2900/mfd/cg2900_lib.h
new file mode 100644
index 0000000..99d5ce6
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_lib.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 GPS/BT/FM controller.
+ */
+
+#ifndef _CG2900_LIB_H_
+#define _CG2900_LIB_H_
+
+#include <linux/firmware.h>
+#include <linux/skbuff.h>
+#include <linux/workqueue.h>
+
+#include "cg2900.h"
+
+/**
+ * struct cg2900_work - Generic work structure.
+ * @work: Work structure.
+ * @user_data: Arbitrary data set by user.
+ */
+struct cg2900_work {
+ struct work_struct work;
+ void *user_data;
+};
+
+/**
+ * struct cg2900_file_info - Info structure for file to download.
+ * @fw_file: Stores firmware file.
+ * @file_offset: Current read offset in firmware file.
+ * @chunk_id: Stores current chunk ID of write file
+ * operations.
+ */
+struct cg2900_file_info {
+ const struct firmware *fw_file;
+ int file_offset;
+ u8 chunk_id;
+};
+
+extern void cg2900_tx_to_chip(struct cg2900_user_data *user,
+ struct cg2900_user_data *logger,
+ struct sk_buff *skb);
+extern void cg2900_tx_no_user(struct cg2900_chip_dev *dev, struct sk_buff *skb);
+extern void cg2900_send_bt_cmd(struct cg2900_user_data *user,
+ struct cg2900_user_data *logger,
+ void *data, int length);
+extern void cg2900_send_bt_cmd_no_user(struct cg2900_chip_dev *dev, void *data,
+ int length);
+extern void cg2900_create_work_item(struct workqueue_struct *wq,
+ work_func_t work_func,
+ void *user_data);
+extern int cg2900_read_and_send_file_part(struct cg2900_user_data *user,
+ struct cg2900_user_data *logger,
+ struct cg2900_file_info *info);
+extern void cg2900_send_to_hci_logger(struct cg2900_user_data *logger,
+ struct sk_buff *skb,
+ u8 direction);
+
+#endif /* _CG2900_LIB_H_ */
diff --git a/drivers/staging/cg2900/mfd/cg2900_test.c b/drivers/staging/cg2900/mfd/cg2900_test.c
new file mode 100644
index 0000000..58ac616
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_test.c
@@ -0,0 +1,402 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Driver for ST-Ericsson CG2900 test character device.
+ */
+#define NAME "cg2900_test"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <asm/byteorder.h>
+#include <linux/firmware.h>
+#include <linux/fs.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/wait.h>
+
+#include "cg2900.h"
+#include "cg2900_core.h"
+
+#define MISC_DEV (info->misc_dev.this_device)
+
+/* Device names */
+#define CG2900_CDEV_NAME "cg2900_core_test"
+
+/**
+ * struct test_info - Main info structure for CG2900 test char device.
+ * @misc_dev: Registered Misc Device.
+ * @rx_queue: RX data queue.
+ * @dev: Device structure for STE Connectivity driver.
+ * @pdev: Platform device structure for STE Connectivity driver.
+ */
+struct test_info {
+ struct miscdevice misc_dev;
+ struct sk_buff_head rx_queue;
+ struct device *dev;
+ struct platform_device *pdev;
+};
+
+static struct test_info *test_info;
+
+/*
+ * main_wait_queue - Char device Wait Queue in CG2900 Core.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(char_wait_queue);
+
+/**
+ * tx_to_char_dev() - Handle data received from CG2900 Core.
+ * @dev: Current chip device information.
+ * @skb: Buffer with data coming form device.
+ */
+static int tx_to_char_dev(struct cg2900_chip_dev *dev, struct sk_buff *skb)
+{
+ struct test_info *info = dev->t_data;
+ skb_queue_tail(&info->rx_queue, skb);
+ wake_up_interruptible_all(&char_wait_queue);
+ return 0;
+}
+
+/**
+ * cg2900_test_open() - User space char device has been opened.
+ * @inode: Device driver information.
+ * @filp: Pointer to the file struct.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EACCES if transport already exists.
+ * -ENOMEM if allocation fails.
+ * Errors from create_work_item.
+ */
+static int cg2900_test_open(struct inode *inode, struct file *filp)
+{
+ struct test_info *info = test_info;
+ struct cg2900_chip_dev *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ dev_err(MISC_DEV, "Cannot allocate test_dev\n");
+ return -ENOMEM;
+ }
+ dev->dev = info->dev;
+ dev->pdev = info->pdev;
+ dev->t_data = info;
+ dev->t_cb.write = tx_to_char_dev;
+ filp->private_data = dev;
+
+ dev_info(MISC_DEV, "CG2900 test char dev opened\n");
+ return cg2900_register_trans_driver(dev);
+}
+
+/**
+ * cg2900_test_release() - User space char device has been closed.
+ * @inode: Device driver information.
+ * @filp: Pointer to the file struct.
+ *
+ * Returns:
+ * 0 if there is no error.
+ */
+static int cg2900_test_release(struct inode *inode, struct file *filp)
+{
+ struct cg2900_chip_dev *dev = filp->private_data;
+ struct test_info *info = dev->t_data;
+
+ dev_info(MISC_DEV, "CG2900 test char dev closed\n");
+ skb_queue_purge(&info->rx_queue);
+ cg2900_deregister_trans_driver(dev);
+ kfree(dev);
+
+ return 0;
+}
+
+/**
+ * cg2900_test_read() - Queue and copy buffer to user space char device.
+ * @filp: Pointer to the file struct.
+ * @buf: Received buffer.
+ * @count: Count of received data in bytes.
+ * @f_pos: Position in buffer.
+ *
+ * Returns:
+ * >= 0 is number of bytes read.
+ * -EFAULT if copy_to_user fails.
+ */
+static ssize_t cg2900_test_read(struct file *filp, char __user *buf,
+ size_t count, loff_t *f_pos)
+{
+ struct sk_buff *skb;
+ int bytes_to_copy;
+ int err;
+ struct cg2900_chip_dev *dev = filp->private_data;
+ struct test_info *info = dev->t_data;
+ struct sk_buff_head *rx_queue = &info->rx_queue;
+
+ dev_dbg(MISC_DEV, "cg2900_test_read count %d\n", count);
+
+ if (skb_queue_empty(rx_queue))
+ wait_event_interruptible(char_wait_queue,
+ !(skb_queue_empty(rx_queue)));
+
+ skb = skb_dequeue(rx_queue);
+ if (!skb) {
+ dev_dbg(MISC_DEV,
+ "skb queue is empty - return with zero bytes\n");
+ bytes_to_copy = 0;
+ goto finished;
+ }
+
+ bytes_to_copy = min(count, skb->len);
+ err = copy_to_user(buf, skb->data, bytes_to_copy);
+ if (err) {
+ skb_queue_head(rx_queue, skb);
+ return -EFAULT;
+ }
+
+ skb_pull(skb, bytes_to_copy);
+
+ if (skb->len > 0)
+ skb_queue_head(rx_queue, skb);
+ else
+ kfree_skb(skb);
+
+finished:
+ return bytes_to_copy;
+}
+
+/**
+ * cg2900_test_write() - Copy buffer from user and write to CG2900 Core.
+ * @filp: Pointer to the file struct.
+ * @buf: Read buffer.
+ * @count: Size of the buffer write.
+ * @f_pos: Position in buffer.
+ *
+ * Returns:
+ * >= 0 is number of bytes written.
+ * -EFAULT if copy_from_user fails.
+ */
+static ssize_t cg2900_test_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *f_pos)
+{
+ struct sk_buff *skb;
+ struct cg2900_chip_dev *dev = filp->private_data;
+ struct test_info *info = dev->t_data;
+
+ dev_dbg(MISC_DEV, "cg2900_test_write count %d\n", count);
+
+ /* Allocate the SKB and reserve space for the header */
+ skb = alloc_skb(count + RX_SKB_RESERVE, GFP_KERNEL);
+ if (!skb) {
+ dev_err(MISC_DEV, "cg2900_test_write: Failed to alloc skb\n");
+ return -ENOMEM;
+ }
+ skb_reserve(skb, RX_SKB_RESERVE);
+
+ if (copy_from_user(skb_put(skb, count), buf, count)) {
+ kfree_skb(skb);
+ return -EFAULT;
+ }
+
+ dev->c_cb.data_from_chip(dev, skb);
+
+ return count;
+}
+
+/**
+ * cg2900_test_poll() - Handle POLL call to the interface.
+ * @filp: Pointer to the file struct.
+ * @wait: Poll table supplied to caller.
+ *
+ * Returns:
+ * Mask of current set POLL values (0 or (POLLIN | POLLRDNORM))
+ */
+static unsigned int cg2900_test_poll(struct file *filp, poll_table *wait)
+{
+ struct cg2900_chip_dev *dev = filp->private_data;
+ struct test_info *info = dev->t_data;
+ unsigned int mask = 0;
+
+ poll_wait(filp, &char_wait_queue, wait);
+
+ if (!(skb_queue_empty(&info->rx_queue)))
+ mask |= POLLIN | POLLRDNORM;
+
+ return mask;
+}
+
+static const struct file_operations test_char_dev_fops = {
+ .open = cg2900_test_open,
+ .release = cg2900_test_release,
+ .read = cg2900_test_read,
+ .write = cg2900_test_write,
+ .poll = cg2900_test_poll
+};
+
+/**
+ * test_char_dev_create() - Create a char device for testing.
+ * @info: Test device info.
+ *
+ * Creates a separate char device that will interact directly with userspace
+ * test application.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from misc_register.
+ */
+static int test_char_dev_create(struct test_info *info)
+{
+ int err;
+
+ /* Initialize the RX queue */
+ skb_queue_head_init(&info->rx_queue);
+
+ /* Prepare miscdevice struct before registering the device */
+ info->misc_dev.minor = MISC_DYNAMIC_MINOR;
+ info->misc_dev.name = CG2900_CDEV_NAME;
+ info->misc_dev.fops = &test_char_dev_fops;
+ info->misc_dev.parent = info->dev;
+ info->misc_dev.mode = S_IRUGO | S_IWUGO;
+
+ err = misc_register(&info->misc_dev);
+ if (err) {
+ dev_err(info->dev, "Error %d registering misc dev", err);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * test_char_dev_destroy() - Clean up after test_char_dev_create().
+ * @info: Test device info.
+ */
+static void test_char_dev_destroy(struct test_info *info)
+{
+ int err;
+
+ err = misc_deregister(&info->misc_dev);
+ if (err)
+ dev_err(info->dev, "Error %d deregistering misc dev\n", err);
+
+ /* Clean the message queue */
+ skb_queue_purge(&info->rx_queue);
+}
+
+/**
+ * cg2900_test_probe() - Initialize module.
+ *
+ * @pdev: Platform device.
+ *
+ * This function initializes and registers the test misc char device.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM for failed alloc or structure creation.
+ * -EEXIST if device already exists.
+ * Error codes generated by test_char_dev_create.
+ */
+static int __devinit cg2900_test_probe(struct platform_device *pdev)
+{
+ int err;
+
+ dev_dbg(&pdev->dev, "cg2900_test_probe\n");
+
+ if (test_info) {
+ dev_err(&pdev->dev, "test_info exists\n");
+ return -EEXIST;
+ }
+
+ test_info = kzalloc(sizeof(*test_info), GFP_KERNEL);
+ if (!test_info) {
+ dev_err(&pdev->dev, "Couldn't allocate test_info\n");
+ return -ENOMEM;
+ }
+
+ test_info->dev = &pdev->dev;
+ test_info->pdev = pdev;
+
+ /* Create and add test char device. */
+ err = test_char_dev_create(test_info);
+ if (err) {
+ kfree(test_info);
+ test_info = NULL;
+ return err;
+ }
+
+ dev_set_drvdata(&pdev->dev, test_info);
+
+ dev_info(&pdev->dev, "CG2900 test char device driver started\n");
+
+ return 0;
+}
+
+/**
+ * cg2900_test_remove() - Remove module.
+ *
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM if core_info does not exist.
+ * -EINVAL if platform data does not exist in the device.
+ */
+static int __devexit cg2900_test_remove(struct platform_device *pdev)
+{
+ struct test_info *test_info;
+
+ dev_dbg(&pdev->dev, "cg2900_test_remove\n");
+ test_info = dev_get_drvdata(&pdev->dev);
+ test_char_dev_destroy(test_info);
+ dev_set_drvdata(&pdev->dev, NULL);
+ kfree(test_info);
+ test_info = NULL;
+ dev_info(&pdev->dev, "CG2900 Test char device driver removed\n");
+ return 0;
+}
+
+static struct platform_driver cg2900_test_driver = {
+ .driver = {
+ .name = "cg2900-test",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_test_probe,
+ .remove = __devexit_p(cg2900_test_remove),
+};
+
+/**
+ * cg2900_test_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init cg2900_test_init(void)
+{
+ pr_debug("cg2900_test_init");
+ return platform_driver_register(&cg2900_test_driver);
+}
+
+/**
+ * cg2900_test_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit cg2900_test_exit(void)
+{
+ pr_debug("cg2900_test_exit");
+ platform_driver_unregister(&cg2900_test_driver);
+}
+
+module_init(cg2900_test_init);
+module_exit(cg2900_test_exit);
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux CG2900 Test Char Device Driver");
diff --git a/drivers/staging/cg2900/mfd/stlc2690_chip.c b/drivers/staging/cg2900/mfd/stlc2690_chip.c
new file mode 100644
index 0000000..d94aade
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/stlc2690_chip.c
@@ -0,0 +1,1653 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson STLC2690 BT/FM controller.
+ */
+#define NAME "stlc2690_chip"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <asm/byteorder.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/stat.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/core.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+
+#include "cg2900.h"
+#include "cg2900_core.h"
+#include "cg2900_lib.h"
+#include "stlc2690_chip.h"
+
+#define MAIN_DEV (main_info->dev)
+#define BOOT_DEV (info->user_in_charge->dev)
+
+#define WQ_NAME "stlc2690_chip_wq"
+
+#define LINE_TOGGLE_DETECT_TIMEOUT 50 /* ms */
+#define CHIP_READY_TIMEOUT 100 /* ms */
+#define CHIP_STARTUP_TIMEOUT 15000 /* ms */
+#define CHIP_SHUTDOWN_TIMEOUT 15000 /* ms */
+
+/** CHANNEL_BT_CMD - Bluetooth HCI H:4 channel
+ * for Bluetooth commands in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_BT_CMD 0x01
+
+/** CHANNEL_BT_ACL - Bluetooth HCI H:4 channel
+ * for Bluetooth ACL data in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_BT_ACL 0x02
+
+/** CHANNEL_BT_EVT - Bluetooth HCI H:4 channel
+ * for Bluetooth events in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_BT_EVT 0x04
+
+/** CHANNEL_HCI_LOGGER - Bluetooth HCI H:4 channel
+ * for logging all transmitted H4 packets (on all channels).
+ */
+#define CHANNEL_HCI_LOGGER 0xFA
+
+/** CHANNEL_CORE - Bluetooth HCI H:4 channel
+ * for user space control of the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_CORE 0xFD
+
+/*
+ * For the char dev names we keep the same names in order to be able to reuse
+ * the users and to keep a consistent interface.
+ */
+
+/** STLC2690_BT_CMD - Bluetooth HCI H4 channel for Bluetooth commands.
+ */
+#define STLC2690_BT_CMD "cg2900_bt_cmd"
+
+/** STLC2690_BT_ACL - Bluetooth HCI H4 channel for Bluetooth ACL data.
+ */
+#define STLC2690_BT_ACL "cg2900_bt_acl"
+
+/** STLC2690_BT_EVT - Bluetooth HCI H4 channel for Bluetooth events.
+ */
+#define STLC2690_BT_EVT "cg2900_bt_evt"
+
+/** STLC2690_HCI_LOGGER - BT channel for logging all transmitted H4 packets.
+ * Data read is copy of all data transferred on the other channels.
+ * Only write allowed is configuration of the HCI Logger.
+ */
+#define STLC2690_HCI_LOGGER "cg2900_hci_logger"
+
+/** STLC2690_CORE- Channel for keeping ST-Ericsson STLC2690 enabled.
+ * Opening this channel forces the chip to stay powered.
+ * No data can be written to or read from this channel.
+ */
+#define STLC2690_CORE "cg2900_core"
+
+/**
+ * enum main_state - Main-state for STLC2690 driver.
+ * @STLC2690_INIT: STLC2690 initializing.
+ * @STLC2690_IDLE: No user registered to STLC2690 driver.
+ * @STLC2690_BOOTING: STLC2690 booting after first user is registered.
+ * @STLC2690_CLOSING: STLC2690 closing after last user has deregistered.
+ * @STLC2690_RESETING: STLC2690 reset requested.
+ * @STLC2690_ACTIVE: STLC2690 up and running with at least one user.
+ */
+enum main_state {
+ STLC2690_INIT,
+ STLC2690_IDLE,
+ STLC2690_BOOTING,
+ STLC2690_CLOSING,
+ STLC2690_RESETING,
+ STLC2690_ACTIVE
+};
+
+/**
+ * enum boot_state - BOOT-state for STLC2690 chip driver.
+ * @BOOT_RESET: HCI Reset has been sent.
+ * @BOOT_SEND_BD_ADDRESS: VS Store In FS command with BD address
+ * has been sent.
+ * @BOOT_GET_FILES_TO_LOAD: STLC2690 chip driver is retrieving file
+ * to load.
+ * @BOOT_DOWNLOAD_PATCH: STLC2690 chip driver is downloading
+ * patches.
+ * @BOOT_ACTIVATE_PATCHES_AND_SETTINGS: STLC2690 chip driver is activating
+ * patches and settings.
+ * @BOOT_READY: STLC2690 chip driver boot is ready.
+ * @BOOT_FAILED: STLC2690 chip driver boot failed.
+ */
+enum boot_state {
+ BOOT_RESET,
+ BOOT_SEND_BD_ADDRESS,
+ BOOT_GET_FILES_TO_LOAD,
+ BOOT_DOWNLOAD_PATCH,
+ BOOT_ACTIVATE_PATCHES_AND_SETTINGS,
+ BOOT_READY,
+ BOOT_FAILED
+};
+
+/**
+ * enum file_load_state - BOOT_FILE_LOAD-state for STLC2690 chip driver.
+ * @FILE_LOAD_GET_PATCH: Loading patches.
+ * @FILE_LOAD_GET_STATIC_SETTINGS: Loading static settings.
+ * @FILE_LOAD_NO_MORE_FILES: No more files to load.
+ * @FILE_LOAD_FAILED: File loading failed.
+ */
+enum file_load_state {
+ FILE_LOAD_GET_PATCH,
+ FILE_LOAD_GET_STATIC_SETTINGS,
+ FILE_LOAD_NO_MORE_FILES,
+ FILE_LOAD_FAILED
+};
+
+/**
+ * enum download_state - BOOT_DOWNLOAD state.
+ * @DOWNLOAD_PENDING: Download in progress.
+ * @DOWNLOAD_SUCCESS: Download successfully finished.
+ * @DOWNLOAD_FAILED: Downloading failed.
+ */
+enum download_state {
+ DOWNLOAD_PENDING,
+ DOWNLOAD_SUCCESS,
+ DOWNLOAD_FAILED
+};
+
+
+/**
+ * struct stlc2690_channel_item - List object for channel.
+ * @list: list_head struct.
+ * @user: User for this channel.
+ */
+struct stlc2690_channel_item {
+ struct list_head list;
+ struct cg2900_user_data *user;
+};
+
+/**
+ * struct stlc2690_skb_data - Structure for storing private data in an sk_buffer.
+ * @dev: STLC2690 device for this sk_buffer.
+ */
+struct stlc2690_skb_data {
+ struct cg2900_user_data *user;
+};
+#define stlc2690_skb_data(__skb) ((struct stlc2690_skb_data *)((__skb)->cb))
+
+/**
+ * struct stlc2690_chip_info - Main info structure for STLC2690 chip driver.
+ * @patch_file_name: Stores patch file name.
+ * @settings_file_name: Stores settings file name.
+ * @file_info: Firmware file info (patch or settings).
+ * @main_state: Current MAIN-state of STLC2690 chip driver.
+ * @boot_state: Current BOOT-state of STLC2690 chip driver.
+ * @file_load_state: Current BOOT_FILE_LOAD-state of STLC2690 chip
+ * driver.
+ * @download_state: Current BOOT_DOWNLOAD-state of STLC2690 chip
+ * driver.
+ * @wq: STLC2690 chip driver workqueue.
+ * @chip_dev: Chip handler info.
+ * @user_in_charge: User currently operating. Normally used at
+ * channel open and close.
+ * @last_user: Last user of this chip.
+ * @logger: Logger user of this chip.
+ */
+struct stlc2690_chip_info {
+ char *patch_file_name;
+ char *settings_file_name;
+ struct cg2900_file_info file_info;
+ enum main_state main_state;
+ enum boot_state boot_state;
+ enum file_load_state file_load_state;
+ enum download_state download_state;
+ struct workqueue_struct *wq;
+ struct cg2900_chip_dev *chip_dev;
+ spinlock_t rw_lock;
+ struct list_head open_channels;
+ struct cg2900_user_data *user_in_charge;
+ struct cg2900_user_data *last_user;
+ struct cg2900_user_data *logger;
+};
+
+/**
+ * struct main_info - Main info structure for STLC2690 chip driver.
+ * @dev: Device structure.
+ * @cell_base_id: Base ID for MFD cells.
+ * @man_mutex: Management mutex.
+ */
+struct main_info {
+ struct device *dev;
+ int cell_base_id;
+ struct mutex man_mutex;
+};
+
+static struct main_info *main_info;
+
+/*
+ * main_wait_queue - Main Wait Queue in STLC2690 driver.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(main_wait_queue);
+
+static void chip_startup_finished(struct stlc2690_chip_info *info, int err);
+
+/**
+ * send_bd_address() - Send HCI VS command with BD address to the chip.
+ */
+static void send_bd_address(struct stlc2690_chip_info *info)
+{
+ struct bt_vs_store_in_fs_cmd *cmd;
+ u8 plen = sizeof(*cmd) + BT_BDADDR_SIZE;
+
+ cmd = kmalloc(plen, GFP_KERNEL);
+ if (!cmd)
+ return;
+
+ cmd->opcode = cpu_to_le16(STLC2690_BT_OP_VS_STORE_IN_FS);
+ cmd->plen = BT_PARAM_LEN(plen);
+ cmd->user_id = STLC2690_VS_STORE_IN_FS_USR_ID_BD_ADDR;
+ cmd->len = BT_BDADDR_SIZE;
+ /* Now copy the BD address received from user space control app. */
+ memcpy(cmd->data, bd_address, BT_BDADDR_SIZE);
+
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_SEND_BD_ADDRESS\n");
+ info->boot_state = BOOT_SEND_BD_ADDRESS;
+
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger, cmd, plen);
+
+ kfree(cmd);
+}
+
+/**
+ * send_settings_file() - Transmit settings file.
+ *
+ * The send_settings_file() function transmit settings file.
+ * The file is read in parts to fit in HCI packets. When finished,
+ * close the settings file and send HCI reset to activate settings and patches.
+ */
+static void send_settings_file(struct stlc2690_chip_info *info)
+{
+ int bytes_sent;
+
+ bytes_sent = cg2900_read_and_send_file_part(info->user_in_charge,
+ info->logger,
+ &info->file_info);
+ if (bytes_sent > 0) {
+ /* Data sent. Wait for CmdComplete */
+ return;
+ } else if (bytes_sent < 0) {
+ dev_err(BOOT_DEV, "send_settings_file: Error %d occurred\n",
+ bytes_sent);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, bytes_sent);
+ return;
+ }
+
+ /* No data was sent. This file is finished */
+ info->download_state = DOWNLOAD_SUCCESS;
+
+ /* Settings file finished. Release used resources */
+ dev_dbg(BOOT_DEV, "Settings file finished, release used resources\n");
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+
+ dev_dbg(BOOT_DEV, "New file_load_state: FILE_LOAD_NO_MORE_FILES\n");
+ info->file_load_state = FILE_LOAD_NO_MORE_FILES;
+
+ /* Create and send HCI VS Store In FS command with bd address. */
+ send_bd_address(info);
+}
+
+/**
+ * send_patch_file - Transmit patch file.
+ *
+ * The send_patch_file() function transmit patch file.
+ * The file is read in parts to fit in HCI packets. When the complete file is
+ * transmitted, the file is closed.
+ * When finished, continue with settings file.
+ */
+static void send_patch_file(struct cg2900_chip_dev *dev)
+{
+ int err;
+ int bytes_sent;
+ struct stlc2690_chip_info *info = dev->c_data;
+ int file_name_size = strlen("STLC2690_XXXX_XXXX_settings.fw");
+
+ bytes_sent = cg2900_read_and_send_file_part(info->user_in_charge,
+ info->logger,
+ &info->file_info);
+ if (bytes_sent > 0) {
+ /* Data sent. Wait for CmdComplete */
+ return;
+ } else if (bytes_sent < 0) {
+ dev_err(BOOT_DEV, "send_patch_file: Error %d occurred\n",
+ bytes_sent);
+ err = bytes_sent;
+ goto error_handling;
+ }
+
+ /* No data was sent. This file is finished */
+ info->download_state = DOWNLOAD_SUCCESS;
+
+ dev_dbg(BOOT_DEV, "Patch file finished, release used resources\n");
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+
+ /*
+ * Create the settings file name from HCI revision and sub_version.
+ * file_name_size does not include terminating NULL character
+ * so add 1.
+ */
+ err = snprintf(info->settings_file_name, file_name_size + 1,
+ "STLC2690_%04X_%04X_settings.fw",
+ dev->chip.hci_revision, dev->chip.hci_sub_version);
+ if (err == file_name_size) {
+ dev_dbg(BOOT_DEV, "Downloading settings file %s\n",
+ info->settings_file_name);
+ } else {
+ dev_err(BOOT_DEV, "Settings file name failed! err=%d\n", err);
+ goto error_handling;
+ }
+
+ /* Retrieve the settings file */
+ err = request_firmware(&info->file_info.fw_file,
+ info->settings_file_name,
+ info->chip_dev->dev);
+ if (err) {
+ dev_err(BOOT_DEV, "Couldn't get settings file (%d)\n", err);
+ goto error_handling;
+ }
+ /* Now send the settings file */
+ dev_dbg(BOOT_DEV,
+ "New file_load_state: FILE_LOAD_GET_STATIC_SETTINGS\n");
+ info->file_load_state = FILE_LOAD_GET_STATIC_SETTINGS;
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_PENDING\n");
+ info->download_state = DOWNLOAD_PENDING;
+ send_settings_file(info);
+ return;
+
+error_handling:
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, err);
+}
+
+/**
+ * work_reset_after_error() - Handle reset.
+ * @work: Reference to work data.
+ *
+ * Handle a reset after received Command Complete event.
+ */
+static void work_reset_after_error(struct work_struct *work)
+{
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+
+ if (!work) {
+ dev_err(MAIN_DEV, "work_reset_after_error: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ chip_startup_finished(info, -EIO);
+
+ kfree(my_work);
+}
+
+/**
+ * work_load_patch_and_settings() - Start loading patches and settings.
+ * @work: Reference to work data.
+ */
+static void work_load_patch_and_settings(struct work_struct *work)
+{
+ int err = 0;
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+ int file_name_size = strlen("STLC2690_XXXX_XXXX_patch.fw");
+
+ if (!work) {
+ dev_err(MAIN_DEV,
+ "work_load_patch_and_settings: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ /* Check that we are in the right state */
+ if (info->boot_state != BOOT_GET_FILES_TO_LOAD)
+ goto finished;
+
+ /*
+ * Create the patch file name from HCI revision and sub_version.
+ * file_name_size does not include terminating NULL character
+ * so add 1.
+ */
+ err = snprintf(info->patch_file_name, file_name_size + 1,
+ "STLC2690_%04X_%04X_patch.fw", dev->chip.hci_revision,
+ dev->chip.hci_sub_version);
+ if (err == file_name_size) {
+ dev_dbg(BOOT_DEV, "Downloading patch file %s\n",
+ info->patch_file_name);
+ } else {
+ dev_err(BOOT_DEV, "Patch file name failed! err=%d\n", err);
+ goto error_handling;
+ }
+
+ /* We now all info needed */
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_DOWNLOAD_PATCH\n");
+ info->boot_state = BOOT_DOWNLOAD_PATCH;
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_PENDING\n");
+ info->download_state = DOWNLOAD_PENDING;
+ dev_dbg(BOOT_DEV, "New file_load_state: FILE_LOAD_GET_PATCH\n");
+ info->file_load_state = FILE_LOAD_GET_PATCH;
+ info->file_info.chunk_id = 0;
+ info->file_info.file_offset = 0;
+ info->file_info.fw_file = NULL;
+
+ /* OK. Now it is time to download the patches */
+ err = request_firmware(&(info->file_info.fw_file),
+ info->patch_file_name,
+ dev->dev);
+ if (err < 0) {
+ dev_err(BOOT_DEV, "Couldn't get patch file (%d)\n", err);
+ goto error_handling;
+ }
+ send_patch_file(dev);
+
+ goto finished;
+
+error_handling:
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, -EIO);
+finished:
+ kfree(my_work);
+}
+
+/**
+ * work_cont_file_download() - A file block has been written.
+ * @work: Reference to work data.
+ *
+ * Handle a received HCI VS Write File Block Complete event.
+ * Normally this means continue to send files to the controller.
+ */
+static void work_cont_file_download(struct work_struct *work)
+{
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+
+ if (!work) {
+ dev_err(MAIN_DEV, "work_cont_file_download: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ /* Continue to send patches or settings to the controller */
+ if (info->file_load_state == FILE_LOAD_GET_PATCH)
+ send_patch_file(dev);
+ else if (info->file_load_state == FILE_LOAD_GET_STATIC_SETTINGS)
+ send_settings_file(info);
+ else
+ dev_dbg(BOOT_DEV, "No more files to load\n");
+
+ kfree(my_work);
+}
+
+/**
+ * handle_reset_cmd_complete() - Handles HCI Reset Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_reset_cmd_complete(struct cg2900_chip_dev *dev, u8 *data)
+{
+ u8 status = data[0];
+ struct stlc2690_chip_info *info = dev->c_data;
+
+ dev_dbg(BOOT_DEV, "Received Reset complete event with status 0x%X\n",
+ status);
+
+ if (BOOT_RESET != info->boot_state &&
+ BOOT_ACTIVATE_PATCHES_AND_SETTINGS != info->boot_state)
+ return false;
+
+ if (HCI_BT_ERROR_NO_ERROR != status) {
+ dev_err(BOOT_DEV, "Command complete for HciReset received with "
+ "error 0x%X\n", status);
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ return true;
+ }
+
+ if (BOOT_RESET == info->boot_state) {
+ info->boot_state = BOOT_GET_FILES_TO_LOAD;
+ cg2900_create_work_item(info->wq, work_load_patch_and_settings,
+ dev);
+ } else {
+ /*
+ * The boot sequence is now finished successfully.
+ * Set states and signal to waiting thread.
+ */
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_READY\n");
+ info->boot_state = BOOT_READY;
+ chip_startup_finished(info, 0);
+ }
+
+ return true;
+}
+
+
+/**
+ * handle_vs_store_in_fs_cmd_complete() - Handles HCI VS StoreInFS Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_store_in_fs_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct stlc2690_chip_info *info = dev->c_data;
+
+ dev_dbg(BOOT_DEV,
+ "Received Store_in_FS complete event with status 0x%X\n",
+ status);
+
+ if (info->boot_state != BOOT_SEND_BD_ADDRESS)
+ return false;
+
+ if (HCI_BT_ERROR_NO_ERROR == status) {
+ struct hci_command_hdr cmd;
+
+ /* Send HCI Reset command to activate patches */
+ dev_dbg(BOOT_DEV,
+ "New boot_state: BOOT_ACTIVATE_PATCHES_AND_SETTINGS\n");
+ info->boot_state = BOOT_ACTIVATE_PATCHES_AND_SETTINGS;
+
+ cmd.opcode = cpu_to_le16(HCI_OP_RESET);
+ cmd.plen = 0; /* No parameters for Reset */
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger, &cmd,
+ sizeof(cmd));
+ } else {
+ dev_err(BOOT_DEV,
+ "Command complete for StoreInFS received with error "
+ "0x%X\n", status);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_write_file_block_cmd_complete() - Handles HCI VS WriteFileBlock Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_write_file_block_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct stlc2690_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_DOWNLOAD_PATCH ||
+ info->download_state != DOWNLOAD_PENDING)
+ return false;
+
+ if (HCI_BT_ERROR_NO_ERROR == status)
+ cg2900_create_work_item(info->wq, work_cont_file_download, dev);
+ else {
+ dev_err(BOOT_DEV,
+ "Command complete for WriteFileBlock received with"
+ " error 0x%X\n", status);
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_FAILED\n");
+ info->download_state = DOWNLOAD_FAILED;
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ if (info->file_info.fw_file) {
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+ }
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_write_file_block_cmd_status() - Handles HCI VS WriteFileBlock Command Status event.
+ * @status: Returned status of WriteFileBlock command.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_write_file_block_cmd_status(struct cg2900_chip_dev *dev,
+ u8 status)
+{
+ struct stlc2690_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_DOWNLOAD_PATCH ||
+ info->download_state != DOWNLOAD_PENDING)
+ return false;
+
+ /*
+ * Only do something if there is an error. Otherwise we will wait for
+ * CmdComplete.
+ */
+ if (HCI_BT_ERROR_NO_ERROR != status) {
+ dev_err(BOOT_DEV,
+ "Command status for WriteFileBlock received with"
+ " error 0x%X\n", status);
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_FAILED\n");
+ info->download_state = DOWNLOAD_FAILED;
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ if (info->file_info.fw_file) {
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+ }
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ }
+
+ return true;
+}
+
+/**
+ * handle_rx_data_bt_evt() - Check if received data should be handled in STLC2690 chip driver.
+ * @skb: Data packet
+ *
+ * The handle_rx_data_bt_evt() function checks if received data should be
+ * handled in STLC2690 chip driver. If so handle it correctly.
+ * Received data is always HCI BT Event.
+ *
+ * Returns:
+ * True, if packet was handled internally,
+ * False, otherwise.
+ */
+static bool handle_rx_data_bt_evt(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb)
+{
+ bool pkt_handled = false;
+ /* skb cannot be NULL here so it is safe to de-reference */
+ u8 *data = skb->data;
+ struct hci_event_hdr *evt;
+ u16 op_code;
+
+ evt = (struct hci_event_hdr *)data;
+ data += sizeof(*evt);
+
+ /* First check the event code. */
+ if (HCI_EV_CMD_COMPLETE == evt->evt) {
+ struct hci_ev_cmd_complete *cmd_complete;
+
+ cmd_complete = (struct hci_ev_cmd_complete *)data;
+ op_code = le16_to_cpu(cmd_complete->opcode);
+ dev_dbg(dev->dev,
+ "Received Command Complete: op_code = 0x%04X\n",
+ op_code);
+ /* Move to first byte after OCF */
+ data += sizeof(*cmd_complete);
+
+ if (op_code == HCI_OP_RESET)
+ pkt_handled = handle_reset_cmd_complete(dev, data);
+ else if (op_code == STLC2690_BT_OP_VS_STORE_IN_FS)
+ pkt_handled = handle_vs_store_in_fs_cmd_complete(dev,
+ data);
+ else if (op_code == STLC2690_BT_OP_VS_WRITE_FILE_BLOCK)
+ pkt_handled =
+ handle_vs_write_file_block_cmd_complete(dev,
+ data);
+ } else if (HCI_EV_CMD_STATUS == evt->evt) {
+ struct hci_ev_cmd_status *cmd_status;
+
+ cmd_status = (struct hci_ev_cmd_status *)data;
+
+ op_code = le16_to_cpu(cmd_status->opcode);
+
+ dev_dbg(dev->dev, "Received Command Status: op_code = 0x%04X\n",
+ op_code);
+
+ if (op_code == STLC2690_BT_OP_VS_WRITE_FILE_BLOCK)
+ pkt_handled = handle_vs_write_file_block_cmd_status
+ (dev, cmd_status->status);
+ } else if (HCI_EV_HW_ERROR == evt->evt) {
+ struct hci_ev_hw_error *hw_error;
+
+ hw_error = (struct hci_ev_hw_error *)data;
+ /*
+ * Only do a printout. There might be a receiving stack that can
+ * handle this event
+ */
+ dev_err(dev->dev, "HW Error event received with error 0x%02X\n",
+ hw_error->hw_code);
+ return false;
+ } else
+ return false;
+
+ if (pkt_handled)
+ kfree_skb(skb);
+
+ return pkt_handled;
+}
+
+/**
+ * data_from_chip() - Called when data is received from the chip.
+ * @dev: Chip info.
+ * @skb: Packet received.
+ *
+ * The data_from_chip() function checks if packet is a response for a packet it
+ * itself has transmitted. If not it finds the correct user and sends the packet
+ * to the user.
+ */
+static void data_from_chip(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb)
+{
+ int h4_channel;
+ struct list_head *cursor;
+ struct stlc2690_channel_item *tmp;
+ struct stlc2690_chip_info *info = dev->c_data;
+ struct cg2900_user_data *user = NULL;
+
+ h4_channel = skb->data[0];
+ skb_pull(skb, HCI_H4_SIZE);
+
+ /* Then check if this is a response to data we have sent */
+ if (h4_channel == CHANNEL_BT_EVT && handle_rx_data_bt_evt(dev, skb))
+ return;
+
+ spin_lock_bh(&info->rw_lock);
+
+ /* Let's see if this packet has the same user as the last one */
+ if (info->last_user && info->last_user->h4_channel == h4_channel) {
+ user = info->last_user;
+ goto user_found;
+ }
+
+ /* Search through the list of all open channels to find the user */
+ list_for_each(cursor, &info->open_channels) {
+ tmp = list_entry(cursor, struct stlc2690_channel_item, list);
+ if (tmp->user->h4_channel == h4_channel) {
+ user = tmp->user;
+ goto user_found;
+ }
+ }
+
+user_found:
+ info->last_user = user;
+ spin_unlock_bh(&info->rw_lock);
+
+ if (user)
+ user->read_cb(user, skb);
+ else {
+ dev_err(dev->dev,
+ "Could not find corresponding user to h4_channel %d\n",
+ h4_channel);
+ kfree_skb(skb);
+ }
+}
+
+static void chip_removed(struct cg2900_chip_dev *dev)
+{
+ struct stlc2690_chip_info *info = dev->c_data;
+
+ mfd_remove_devices(dev->dev);
+ kfree(info->settings_file_name);
+ kfree(info->patch_file_name);
+ destroy_workqueue(info->wq);
+ kfree(info);
+ dev->c_data = NULL;
+ dev->c_cb.chip_removed = NULL;
+ dev->c_cb.data_from_chip = NULL;
+}
+
+/**
+ * chip_shutdown() - Reset and power the chip off.
+ */
+static void chip_shutdown(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev = cg2900_get_prv(user);
+ struct stlc2690_chip_info *info = dev->c_data;
+
+ dev_dbg(user->dev, "chip_shutdown\n");
+
+ /* Close the transport, which will power off the chip */
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ /* Chip shut-down finished, set correct state and wake up the chip. */
+ dev_dbg(dev->dev, "New main_state: STLC2690_IDLE\n");
+ info->main_state = STLC2690_IDLE;
+ wake_up_all(&main_wait_queue);
+}
+
+static void chip_startup_finished(struct stlc2690_chip_info *info, int err)
+{
+ dev_dbg(BOOT_DEV, "chip_startup_finished (%d)\n", err);
+
+ if (err)
+ /* Shutdown the chip */
+ chip_shutdown(info->user_in_charge);
+ else {
+ dev_dbg(BOOT_DEV, "New main_state: CORE_ACTIVE\n");
+ info->main_state = STLC2690_ACTIVE;
+ }
+
+ wake_up_all(&main_wait_queue);
+
+ if (err)
+ return;
+
+ if (!info->chip_dev->t_cb.chip_startup_finished)
+ dev_err(BOOT_DEV, "chip_startup_finished callback not found\n");
+ else
+ info->chip_dev->t_cb.chip_startup_finished(info->chip_dev);
+}
+
+static int stlc2690_open(struct cg2900_user_data *user)
+{
+ int err;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+ struct list_head *cursor;
+ struct stlc2690_channel_item *tmp;
+ struct hci_command_hdr cmd;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV, "stlc2690_open: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(user->dev, "stlc2690_open\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ mutex_lock(&main_info->man_mutex);
+
+ /* Add a minor wait in order to avoid CPU blocking, looping openings */
+ err = wait_event_timeout(main_wait_queue,
+ (STLC2690_IDLE == info->main_state ||
+ STLC2690_ACTIVE == info->main_state),
+ msecs_to_jiffies(LINE_TOGGLE_DETECT_TIMEOUT));
+ if (err <= 0) {
+ if (STLC2690_INIT == info->main_state)
+ dev_err(user->dev, "Transport not opened\n");
+ else
+ dev_err(user->dev, "stlc2690_open currently busy "
+ "(0x%X). Try again\n", info->main_state);
+ err = -EBUSY;
+ goto err_free_mutex;
+ }
+
+ err = 0;
+
+ list_for_each(cursor, &info->open_channels) {
+ tmp = list_entry(cursor, struct stlc2690_channel_item, list);
+ if (tmp->user->h4_channel == user->h4_channel) {
+ dev_err(user->dev, "Channel %d is already opened\n",
+ user->h4_channel);
+ err = -EACCES;
+ goto err_free_mutex;
+ }
+ }
+
+ tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
+ if (!tmp) {
+ dev_err(user->dev, "Could not allocate tmp\n");
+ err = -ENOMEM;
+ goto err_free_mutex;
+ }
+ tmp->user = user;
+
+ if (STLC2690_ACTIVE != info->main_state &&
+ !user->chip_independent) {
+ /* Open transport and start-up the chip */
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, true);
+
+ /* Wait to be sure that the chip is ready */
+ schedule_timeout_killable(
+ msecs_to_jiffies(CHIP_READY_TIMEOUT));
+
+ if (dev->t_cb.open)
+ err = dev->t_cb.open(dev);
+ if (err) {
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, false);
+ goto err_free_list_item;
+ }
+
+ /* Start the boot sequence */
+ info->user_in_charge = user;
+ info->last_user = user;
+ dev_dbg(user->dev, "New boot_state: BOOT_RESET\n");
+ info->boot_state = BOOT_RESET;
+ dev_dbg(user->dev, "New main_state: STLC2690_BOOTING\n");
+ info->main_state = STLC2690_BOOTING;
+ cmd.opcode = cpu_to_le16(HCI_OP_RESET);
+ cmd.plen = 0; /* No parameters for HCI reset */
+ cg2900_send_bt_cmd(user, info->logger, &cmd, sizeof(cmd));
+
+ dev_dbg(user->dev, "Wait up to 15 seconds for chip to start\n");
+ wait_event_timeout(main_wait_queue,
+ (STLC2690_ACTIVE == info->main_state ||
+ STLC2690_IDLE == info->main_state),
+ msecs_to_jiffies(CHIP_STARTUP_TIMEOUT));
+ if (STLC2690_ACTIVE != info->main_state) {
+ dev_err(user->dev, "STLC2690 driver failed to start\n");
+
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ dev_dbg(user->dev, "New main_state: CORE_IDLE\n");
+ info->main_state = STLC2690_IDLE;
+ err = -EIO;
+ goto err_free_list_item;
+ }
+ }
+
+ list_add_tail(&tmp->list, &info->open_channels);
+
+ user->opened = true;
+
+ dev_dbg(user->dev, "H:4 channel opened\n");
+
+ mutex_unlock(&main_info->man_mutex);
+ return 0;
+err_free_list_item:
+ kfree(tmp);
+err_free_mutex:
+ mutex_unlock(&main_info->man_mutex);
+ return err;
+}
+
+static int stlc2690_hci_log_open(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+ int err;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "stlc2690_hci_log_open: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(user->dev, "stlc2690_hci_log_open\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (info->logger) {
+ dev_err(user->dev, "HCI Logger already stored\n");
+ return -EACCES;
+ }
+
+ info->logger = user;
+ err = stlc2690_open(user);
+ if (err)
+ info->logger = NULL;
+ return err;
+}
+
+static void stlc2690_close(struct cg2900_user_data *user)
+{
+ bool keep_powered = false;
+ struct list_head *cursor, *next;
+ struct stlc2690_channel_item *tmp;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "stlc2690_close: Calling with NULL pointer\n");
+ return;
+ }
+
+ dev_dbg(user->dev, "stlc2690_close\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ mutex_lock(&main_info->man_mutex);
+
+ /*
+ * Go through each open channel. Remove our channel and check if there
+ * is any other channel that want to keep the chip running
+ */
+ list_for_each_safe(cursor, next, &info->open_channels) {
+ tmp = list_entry(cursor, struct stlc2690_channel_item, list);
+ if (tmp->user == user) {
+ list_del(cursor);
+ kfree(tmp);
+ } else if (!tmp->user->chip_independent)
+ keep_powered = true;
+ }
+
+ if (keep_powered)
+ /* This was not the last user, we're done. */
+ goto finished;
+
+ if (STLC2690_IDLE == info->main_state)
+ /* Chip has already been shut down. */
+ goto finished;
+
+ dev_dbg(user->dev, "New main_state: CORE_CLOSING\n");
+ info->main_state = STLC2690_CLOSING;
+ chip_shutdown(user);
+
+ dev_dbg(user->dev, "Wait up to 15 seconds for chip to shut-down\n");
+ wait_event_timeout(main_wait_queue,
+ STLC2690_IDLE == info->main_state,
+ msecs_to_jiffies(CHIP_SHUTDOWN_TIMEOUT));
+
+ /* Force shutdown if we timed out */
+ if (STLC2690_IDLE != info->main_state) {
+ dev_err(user->dev,
+ "ST-Ericsson STLC2690 Core Driver was shut-down with "
+ "problems\n");
+
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ dev_dbg(user->dev, "New main_state: CORE_IDLE\n");
+ info->main_state = STLC2690_IDLE;
+ }
+
+finished:
+ mutex_unlock(&main_info->man_mutex);
+ user->opened = false;
+ dev_dbg(user->dev, "H:4 channel closed\n");
+}
+
+static void stlc2690_hci_log_close(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "stlc2690_hci_log_close: Calling with NULL pointer\n");
+ return;
+ }
+
+ dev_dbg(user->dev, "stlc2690_hci_log_close\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ info->logger = NULL;
+ stlc2690_close(user);
+}
+
+static int stlc2690_reset(struct cg2900_user_data *user)
+{
+ struct list_head *cursor, *next;
+ struct stlc2690_channel_item *tmp;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "stlc2690_reset: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ dev_info(user->dev, "stlc2690_reset\n");
+
+ BUG_ON(!main_info);
+
+ mutex_lock(&main_info->man_mutex);
+
+ dev_dbg(user->dev, "New main_state: CORE_RESETING\n");
+ info->main_state = STLC2690_RESETING;
+
+ chip_shutdown(user);
+
+ /*
+ * Inform all opened channels about the reset and free the user devices
+ */
+ list_for_each_safe(cursor, next, &info->open_channels) {
+ tmp = list_entry(cursor, struct stlc2690_channel_item, list);
+ list_del(cursor);
+ tmp->user->opened = false;
+ tmp->user->reset_cb(tmp->user);
+ kfree(tmp);
+ }
+
+ /* Reset finished. We are now idle until first channel is opened */
+ dev_dbg(user->dev, "New main_state: STLC2690_IDLE\n");
+ info->main_state = STLC2690_IDLE;
+
+ mutex_unlock(&main_info->man_mutex);
+
+ /*
+ * Send wake-up since this might have been called from a failed boot.
+ * No harm done if it is a STLC2690 chip user who called.
+ */
+ wake_up_all(&main_wait_queue);
+
+ return 0;
+}
+
+static struct sk_buff *stlc2690_alloc_skb(unsigned int size, gfp_t priority)
+{
+ struct sk_buff *skb;
+
+ dev_dbg(MAIN_DEV, "stlc2690_alloc_skb size %d bytes\n", size);
+
+ /* Allocate the SKB and reserve space for the header */
+ skb = alloc_skb(size + CG2900_SKB_RESERVE, priority);
+ if (skb)
+ skb_reserve(skb, CG2900_SKB_RESERVE);
+
+ return skb;
+}
+
+static int stlc2690_write(struct cg2900_user_data *user, struct sk_buff *skb)
+{
+ int err = 0;
+ u8 *h4_header;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "stlc2690_write: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ if (!skb) {
+ dev_err(user->dev, "stlc2690_write with no sk_buffer\n");
+ return -EINVAL;
+ }
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ dev_dbg(user->dev, "stlc2690_write length %d bytes\n", skb->len);
+
+ if (!user->opened) {
+ dev_err(user->dev,
+ "Trying to transmit data on a closed channel\n");
+ return -EACCES;
+ }
+
+ /*
+ * Move the data pointer to the H:4 header position and
+ * store the H4 header.
+ */
+ h4_header = skb_push(skb, CG2900_SKB_RESERVE);
+ *h4_header = (u8)user->h4_channel;
+ cg2900_tx_to_chip(user, info->logger, skb);
+
+ return err;
+}
+
+static int stlc2690_no_write(struct cg2900_user_data *user,
+ struct sk_buff *skb)
+{
+ dev_err(user->dev, "Not allowed to send on this channel\n");
+ return -EPERM;
+}
+
+static bool stlc2690_get_local_revision(struct cg2900_user_data *user,
+ struct cg2900_rev_data *rev_data)
+{
+ struct cg2900_chip_dev *dev;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV, "stlc2690_get_local_revision: Calling with "
+ "NULL pointer\n");
+ return false;
+ }
+
+ if (!rev_data) {
+ dev_err(user->dev, "Calling with rev_data NULL\n");
+ return false;
+ }
+
+ dev = cg2900_get_prv(user);
+
+ rev_data->revision = dev->chip.hci_revision;
+ rev_data->sub_version = dev->chip.hci_sub_version;
+
+ return true;
+}
+
+static struct cg2900_user_data btcmd_data = {
+ .h4_channel = CHANNEL_BT_CMD,
+};
+static struct cg2900_user_data btacl_data = {
+ .h4_channel = CHANNEL_BT_ACL,
+};
+static struct cg2900_user_data btevt_data = {
+ .h4_channel = CHANNEL_BT_EVT,
+};
+static struct cg2900_user_data hci_logger_data = {
+ .h4_channel = CHANNEL_HCI_LOGGER,
+ .chip_independent = true,
+ .write = stlc2690_no_write,
+ .open = stlc2690_hci_log_open,
+ .close = stlc2690_hci_log_close,
+};
+static struct cg2900_user_data core_data = {
+ .h4_channel = CHANNEL_CORE,
+ .write = stlc2690_no_write,
+};
+
+static struct mfd_cell stlc2690_devs[] = {
+ {
+ .name = "cg2900-btcmd",
+ .platform_data = &btcmd_data,
+ .data_size = sizeof(btcmd_data),
+ },
+ {
+ .name = "cg2900-btacl",
+ .platform_data = &btacl_data,
+ .data_size = sizeof(btacl_data),
+ },
+ {
+ .name = "cg2900-btevt",
+ .platform_data = &btevt_data,
+ .data_size = sizeof(btevt_data),
+ },
+ {
+ .name = "cg2900-hcilogger",
+ .platform_data = &hci_logger_data,
+ .data_size = sizeof(hci_logger_data),
+ },
+ {
+ .name = "cg2900-core",
+ .platform_data = &core_data,
+ .data_size = sizeof(core_data),
+ },
+};
+
+static struct cg2900_user_data char_btcmd_data = {
+ .channel_data = {
+ .char_dev_name = STLC2690_BT_CMD,
+ },
+ .h4_channel = CHANNEL_BT_CMD,
+};
+static struct cg2900_user_data char_btacl_data = {
+ .channel_data = {
+ .char_dev_name = STLC2690_BT_ACL,
+ },
+ .h4_channel = CHANNEL_BT_ACL,
+};
+static struct cg2900_user_data char_btevt_data = {
+ .channel_data = {
+ .char_dev_name = STLC2690_BT_EVT,
+ },
+ .h4_channel = CHANNEL_BT_EVT,
+};
+static struct cg2900_user_data char_hci_logger_data = {
+ .channel_data = {
+ .char_dev_name = STLC2690_HCI_LOGGER,
+ },
+ .h4_channel = CHANNEL_HCI_LOGGER,
+ .chip_independent = true,
+ .write = stlc2690_no_write,
+ .open = stlc2690_hci_log_open,
+ .close = stlc2690_hci_log_close,
+};
+static struct cg2900_user_data char_core_data = {
+ .channel_data = {
+ .char_dev_name = STLC2690_CORE,
+ },
+ .h4_channel = CHANNEL_CORE,
+ .write = stlc2690_no_write,
+};
+
+static struct mfd_cell stlc2690_char_devs[] = {
+ {
+ .name = "cg2900-chardev",
+ .id = 0,
+ .platform_data = &char_btcmd_data,
+ .data_size = sizeof(char_btcmd_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 1,
+ .platform_data = &char_btacl_data,
+ .data_size = sizeof(char_btacl_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 2,
+ .platform_data = &char_btevt_data,
+ .data_size = sizeof(char_btevt_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 7,
+ .platform_data = &char_hci_logger_data,
+ .data_size = sizeof(char_hci_logger_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 8,
+ .platform_data = &char_core_data,
+ .data_size = sizeof(char_core_data),
+ },
+};
+
+/**
+ * set_plat_data() - Initializes data for an MFD cell.
+ * @cell: MFD cell.
+ * @dev: Current chip.
+ *
+ * Sets each callback to default function unless already set.
+ */
+static void set_plat_data(struct mfd_cell *cell, struct cg2900_chip_dev *dev)
+{
+ struct cg2900_user_data *user = cell->platform_data;
+
+ if (!user->open)
+ user->open = stlc2690_open;
+ if (!user->close)
+ user->close = stlc2690_close;
+ if (!user->reset)
+ user->reset = stlc2690_reset;
+ if (!user->alloc_skb)
+ user->alloc_skb = stlc2690_alloc_skb;
+ if (!user->write)
+ user->write = stlc2690_write;
+ if (!user->get_local_revision)
+ user->get_local_revision = stlc2690_get_local_revision;
+
+ cg2900_set_prv(user, dev);
+}
+
+/**
+ * check_chip_support() - Checks if connected chip is handled by this driver.
+ * @dev: Chip info structure.
+ *
+ * If supported return true and fill in @callbacks.
+ *
+ * Returns:
+ * true if chip is handled by this driver.
+ * false otherwise.
+ */
+static bool check_chip_support(struct cg2900_chip_dev *dev)
+{
+ struct cg2900_platform_data *pf_data;
+ struct stlc2690_chip_info *info;
+ int i;
+ int err;
+
+ dev_dbg(dev->dev, "check_chip_support\n");
+
+ /*
+ * Check if this is a STLC2690 revision.
+ * We do not care about the sub-version at the moment. Change this if
+ * necessary.
+ */
+ if (dev->chip.manufacturer != STLC2690_SUPP_MANUFACTURER ||
+ dev->chip.hci_revision < STLC2690_SUPP_REVISION_MIN ||
+ dev->chip.hci_revision > STLC2690_SUPP_REVISION_MAX) {
+ dev_dbg(dev->dev, "Chip not supported by STLC2690 driver\n"
+ "\tMan: 0x%02X\n"
+ "\tRev: 0x%04X\n"
+ "\tSub: 0x%04X\n",
+ dev->chip.manufacturer, dev->chip.hci_revision,
+ dev->chip.hci_sub_version);
+ return false;
+ }
+
+ /* Store needed data */
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(dev->dev, "Couldn't allocate info struct\n");
+ return false;
+ }
+
+ /* Initialize all variables */
+ INIT_LIST_HEAD(&info->open_channels);
+ spin_lock_init(&info->rw_lock);
+ info->chip_dev = dev;
+
+ info->wq = create_singlethread_workqueue(WQ_NAME);
+ if (!info->wq) {
+ dev_err(dev->dev, "Could not create workqueue\n");
+ goto err_handling_free_info;
+ }
+
+ info->patch_file_name = kzalloc(NAME_MAX + 1, GFP_ATOMIC);
+ if (!info->patch_file_name) {
+ dev_err(dev->dev,
+ "Couldn't allocate name buffer for patch file\n");
+ goto err_handling_destroy_wq;
+ }
+
+ info->settings_file_name = kzalloc(NAME_MAX + 1, GFP_ATOMIC);
+ if (!info->settings_file_name) {
+ dev_err(dev->dev,
+ "Couldn't allocate name buffers settings file\n");
+ goto err_handling_free_patch_name;
+ }
+
+ dev->c_data = info;
+ /* Set the callbacks */
+ dev->c_cb.data_from_chip = data_from_chip;
+ dev->c_cb.chip_removed = chip_removed,
+ info->chip_dev = dev;
+
+ mutex_lock(&main_info->man_mutex);
+
+ pf_data = dev_get_platdata(dev->dev);
+ btcmd_data.channel_data.bt_bus = pf_data->bus;
+ btacl_data.channel_data.bt_bus = pf_data->bus;
+ btevt_data.channel_data.bt_bus = pf_data->bus;
+
+ for (i = 0; i < ARRAY_SIZE(stlc2690_devs); i++)
+ set_plat_data(&stlc2690_devs[i], dev);
+ for (i = 0; i < ARRAY_SIZE(stlc2690_char_devs); i++)
+ set_plat_data(&stlc2690_char_devs[i], dev);
+
+ err = mfd_add_devices(dev->dev, main_info->cell_base_id, stlc2690_devs,
+ ARRAY_SIZE(stlc2690_devs), NULL, 0);
+ if (err) {
+ dev_err(dev->dev, "Failed to add stlc2690_devs (%d)\n", err);
+ goto err_handling_free_settings_name;
+ }
+
+ err = mfd_add_devices(dev->dev, main_info->cell_base_id,
+ stlc2690_char_devs,
+ ARRAY_SIZE(stlc2690_char_devs), NULL, 0);
+ if (err) {
+ dev_err(dev->dev, "Failed to add stlc2690_char_devs (%d)\n",
+ err);
+ goto err_handling_remove_devs;
+ }
+
+ main_info->cell_base_id += 30;
+ mutex_unlock(&main_info->man_mutex);
+
+ dev_info(dev->dev, "Chip supported by the STLC2690 chip driver\n");
+
+ /* Close the transport, which will power off the chip */
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ dev_dbg(dev->dev, "New main_state: STLC2690_IDLE\n");
+ info->main_state = STLC2690_IDLE;
+
+ return true;
+
+err_handling_remove_devs:
+ mfd_remove_devices(dev->dev);
+err_handling_free_settings_name:
+ kfree(info->settings_file_name);
+err_handling_free_patch_name:
+ kfree(info->patch_file_name);
+err_handling_destroy_wq:
+ destroy_workqueue(info->wq);
+err_handling_free_info:
+ kfree(info);
+ return false;
+}
+
+static struct cg2900_id_callbacks chip_support_callbacks = {
+ .check_chip_support = check_chip_support,
+};
+
+/**
+ * stlc2690_chip_probe() - Initialize STLC2690 chip handler resources.
+ * @pdev: Platform device.
+ *
+ * This function initializes the STLC2690 driver, then registers to
+ * the CG2900 Core.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM for failed alloc or structure creation.
+ * Error codes generated by cg2900_register_chip_driver.
+ */
+static int __devinit stlc2690_chip_probe(struct platform_device *pdev)
+{
+ int err;
+
+ dev_dbg(&pdev->dev, "stlc2690_chip_probe\n");
+
+ main_info = kzalloc(sizeof(*main_info), GFP_ATOMIC);
+ if (!main_info) {
+ dev_err(&pdev->dev, "Couldn't allocate main_info\n");
+ return -ENOMEM;
+ }
+
+ main_info->dev = &pdev->dev;
+ mutex_init(&main_info->man_mutex);
+
+ err = cg2900_register_chip_driver(&chip_support_callbacks);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Couldn't register chip driver (%d)\n", err);
+ goto error_handling;
+ }
+
+ dev_info(&pdev->dev, "STLC2690 chip driver started\n");
+
+ return 0;
+
+error_handling:
+ mutex_destroy(&main_info->man_mutex);
+ kfree(main_info);
+ main_info = NULL;
+ return err;
+}
+
+/**
+ * stlc2690_chip_remove() - Release STLC2690 chip handler resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success (always success).
+ */
+static int __devexit stlc2690_chip_remove(struct platform_device *pdev)
+{
+ dev_info(&pdev->dev, "STLC2690 chip driver removed\n");
+
+ cg2900_deregister_chip_driver(&chip_support_callbacks);
+
+ if (!main_info)
+ return 0;
+
+ mutex_destroy(&main_info->man_mutex);
+ kfree(main_info);
+ main_info = NULL;
+ return 0;
+}
+
+static struct platform_driver stlc2690_chip_driver = {
+ .driver = {
+ .name = "stlc2690-chip",
+ .owner = THIS_MODULE,
+ },
+ .probe = stlc2690_chip_probe,
+ .remove = __devexit_p(stlc2690_chip_remove),
+};
+
+/**
+ * stlc2690_chip_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init stlc2690_chip_init(void)
+{
+ pr_debug("stlc2690_chip_init");
+ return platform_driver_register(&stlc2690_chip_driver);
+}
+
+/**
+ * stlc2690_chip_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit stlc2690_chip_exit(void)
+{
+ pr_debug("stlc2690_chip_exit");
+ platform_driver_unregister(&stlc2690_chip_driver);
+}
+
+module_init(stlc2690_chip_init);
+module_exit(stlc2690_chip_exit);
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux STLC2690 Connectivity Device Driver");
diff --git a/drivers/staging/cg2900/mfd/stlc2690_chip.h b/drivers/staging/cg2900/mfd/stlc2690_chip.h
new file mode 100644
index 0000000..d14e773
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/stlc2690_chip.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson STLC2690 BT/FM controller.
+ */
+
+#ifndef _STLC2690_CHIP_H_
+#define _STLC2690_CHIP_H_
+
+/* Supported chips */
+#define STLC2690_SUPP_MANUFACTURER 0x30
+#define STLC2690_SUPP_REVISION_MIN 0x0500
+#define STLC2690_SUPP_REVISION_MAX 0x06FF
+
+#define BT_SIZE_OF_HDR (sizeof(__le16) + sizeof(__u8))
+#define BT_PARAM_LEN(__pkt_len) (__pkt_len - BT_SIZE_OF_HDR)
+
+/* BT VS Store In FS command */
+#define STLC2690_BT_OP_VS_STORE_IN_FS 0xFC22
+struct bt_vs_store_in_fs_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 user_id;
+ __u8 len;
+ __u8 data[];
+} __packed;
+
+/* BT VS Write File Block command */
+#define STLC2690_BT_OP_VS_WRITE_FILE_BLOCK 0xFC2E
+struct bt_vs_write_file_block_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 id;
+ __u8 data[];
+} __packed;
+
+/* User ID for storing BD address in chip using Store_In_FS command */
+#define STLC2690_VS_STORE_IN_FS_USR_ID_BD_ADDR 0xFE
+
+#endif /* _STLC2690_CHIP_H_ */
--
1.7.4.1
On Tuesday 29 March 2011, Par-Gunnar Hjalmdahl wrote:
> This patch adds support for the ST-Ericsson CG2900
> Connectivity Combo controller (Bluetooth, FM, GPS).
>
> Signed-off-by: Par-Gunnar Hjalmdahl <[email protected]>
> Acked-by: Linus Walleij <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
> -----Original Message-----
> From: Greg KH [mailto:[email protected]]
> Sent: den 5 april 2011 08:09
> > +config CG2900_UART
> > + tristate "Support CG2900 UART transport"
> > + depends on CG2900
> > + select BT
> > + select BT_HCIUART
>=20
> No, depend on this, don't have a staging driver select any other config
> options, sorry.
>=20
> Care to fix this up, and your drivers/staging/Kconfig fuzz in the patch
> and resend it?
>=20
> thanks,
>=20
> greg k-h
This is code left from the non-staging state. I will update and resend.
Thanks,
P-G
On Tue, Mar 29, 2011 at 01:49:18PM +0200, Par-Gunnar Hjalmdahl wrote:
> +config CG2900_UART
> + tristate "Support CG2900 UART transport"
> + depends on CG2900
> + select BT
> + select BT_HCIUART
No, depend on this, don't have a staging driver select any other config
options, sorry.
Care to fix this up, and your drivers/staging/Kconfig fuzz in the patch
and resend it?
thanks,
greg k-h