Hi
We found during testing problem when setting rfcomm (SPP) channel between
two 2.1 devices.
The test case always failed mostly saying security block on l2cap level
but sometimes the fail root cause was 'Command not understood' on l2cap
as well.
Analyzing security block issue, I found that there's unencrypted link when
l2cap command 'connection request' is sent to remote.
The second issue with 'command not understood' has turn out to be related to
expiration of l2cap timer and its implications.
Solution that I found to fix the problem seems to be related to old commit
330605423ca6eafafb8dcc27502bce1c585d1b06 made by Ilia Kolomisnky. When there's
authentication ongoing, 'encryption pending' should be turn on, otherwise
there're situations when link stays unencrypted.
The issue with timer expiration is related to Andrzej Kaczmarek's patch
sent to community a couple days ago (~ 2011/10/20).
This patch actually recalculates (repairs) timer values on l2cap which were
wrongly converted before.
With this patch the expiration issue disappears during the test case
I've made, otherwise just reverting 330605423ca6eafafb8dcc27502bce1c585d1b06
is not enough, since timer issue blocks very often passing the test case.
@Ilia: Can you point out what was the root cause of problems with time-outs
on l2cap that push you send the patch [605423ca6eafafb8dcc27502bce1c585d1b06].
Isn't it to be related to the patch that repairs the l2cap timer values
mentioned above ?
BR,
/Arek
Arek Lichwa (1):
Bluetooth: Revert: Fix L2CAP connection establishment
net/bluetooth/hci_conn.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
--
1.7.6
Hi Arek,
* Arek Lichwa <[email protected]> [2011-10-26 11:23:21 +0200]:
> Hi
>
> We found during testing problem when setting rfcomm (SPP) channel between
> two 2.1 devices.
> The test case always failed mostly saying security block on l2cap level
> but sometimes the fail root cause was 'Command not understood' on l2cap
> as well.
> Analyzing security block issue, I found that there's unencrypted link when
> l2cap command 'connection request' is sent to remote.
> The second issue with 'command not understood' has turn out to be related to
> expiration of l2cap timer and its implications.
>
> Solution that I found to fix the problem seems to be related to old commit
> 330605423ca6eafafb8dcc27502bce1c585d1b06 made by Ilia Kolomisnky. When there's
> authentication ongoing, 'encryption pending' should be turn on, otherwise
> there're situations when link stays unencrypted.
> The issue with timer expiration is related to Andrzej Kaczmarek's patch
> sent to community a couple days ago (~ 2011/10/20).
> This patch actually recalculates (repairs) timer values on l2cap which were
> wrongly converted before.
> With this patch the expiration issue disappears during the test case
> I've made, otherwise just reverting 330605423ca6eafafb8dcc27502bce1c585d1b06
> is not enough, since timer issue blocks very often passing the test case.
Are you saying that Andrzej's patch together with revert of 330605423 fixes
the problem? and are you sure that we are not creating any new regression?
Gustavo
Hi
>Subject: [PATCH] Bluetooth: Revert: Fix L2CAP connection establishment
>
>This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06.
>The commit introduces regression when two 2.1 devices attempt
>establish rfcomm channel. Such connection is refused since there's
>a security block issue on l2cap. It means the link is unencrypted.
>
>2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24
> 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff
>[email protected]....??
> 0010: 35 05 0a 00 00 ff ff 00 5....??.
>2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets
>(0x13) plen 5
> handle 1 packets 1
>2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88
> L2CAP(d): cid 0x0040 len 84 [psm 0]
> 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00
>....O.L5J5H.....
> 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03
>......5.......5.
> 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02
>......5.5.......
> 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09
>................
> 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05
>...........(....
> 0050: 09 00 02 00 ....
>2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested
>(0x01|0x0011) plen 2
> handle 1
>2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4
> Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
>2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6
> bdaddr 00:00:F2:6A:29:69
>2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply
>(0x01|0x000b) plen 22
> bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532
>2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10
> Link Key Request Reply (0x01|0x000b) ncmd 1
> status 0x00 bdaddr 00:00:F2:6A:29:69
>2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3
> status 0x00 handle 1
>2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12
> 0000: 08 00 01 00 02 05 04 00 03 00 41 00 ..........A.
>2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4
> Unknown (0x00|0x0000) status 0x00 ncmd 2
>2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets
>(0x13) plen 5
> handle 1 packets 1
>2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16
> L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0
> Connection refused - security block
>2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12
> 0000: 08 00 01 00 06 06 04 00 40 00 40 00 ........@.@.
>2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets
>(0x13) plen 5
> handle 1 packets 1
>2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12
> L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
>2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen
>3
> handle 1 reason 0x13
> Reason: Remote User Terminated Connection
>2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4
> Disconnect (0x01|0x0006) status 0x00 ncmd 1
>2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4
> status 0x00 handle 1 reason 0x16
> Reason: Connection Terminated by Local Host
>
>Signed-off-by: Arek Lichwa <[email protected]>
>---
> net/bluetooth/hci_conn.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
>diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
>index c1c597e..e0af723 100644
>--- a/net/bluetooth/hci_conn.c
>+++ b/net/bluetooth/hci_conn.c
>@@ -673,7 +673,7 @@ int hci_conn_security(struct hci_conn *conn, __u8
>sec_level, __u8 auth_type)
> goto encrypt;
>
> auth:
>- if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
>+ if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
> return 0;
>
> if (!hci_conn_auth(conn, sec_level, auth_type))
>--
>1.7.6
Is it something unclear in my original post ? Any comments ?
Regression here is quite obvious in my opinion.
/Arek
This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06.
The commit introduces regression when two 2.1 devices attempt
establish rfcomm channel. Such connection is refused since there's
a security block issue on l2cap. It means the link is unencrypted.
2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24
0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff
[email protected]....˙˙
0010: 35 05 0a 00 00 ff ff 00 5....˙˙.
2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets
(0x13) plen 5
handle 1 packets 1
2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88
L2CAP(d): cid 0x0040 len 84 [psm 0]
0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00
....O.L5J5H.....
0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03
......5.......5.
0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02
......5.5.......
0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09
................
0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05
...........(....
0050: 09 00 02 00 ....
2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested
(0x01|0x0011) plen 2
handle 1
2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4
Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:00:F2:6A:29:69
2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply
(0x01|0x000b) plen 22
bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532
2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10
Link Key Request Reply (0x01|0x000b) ncmd 1
status 0x00 bdaddr 00:00:F2:6A:29:69
2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3
status 0x00 handle 1
2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12
0000: 08 00 01 00 02 05 04 00 03 00 41 00 ..........A.
2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 2
2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets
(0x13) plen 5
handle 1 packets 1
2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0
Connection refused - security block
2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12
0000: 08 00 01 00 06 06 04 00 40 00 40 00 ........@.@.
2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets
(0x13) plen 5
handle 1 packets 1
2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen
3
handle 1 reason 0x13
Reason: Remote User Terminated Connection
2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 1 reason 0x16
Reason: Connection Terminated by Local Host
Signed-off-by: Arek Lichwa <[email protected]>
---
net/bluetooth/hci_conn.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index c1c597e..e0af723 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -673,7 +673,7 @@ int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
goto encrypt;
auth:
- if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
+ if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
return 0;
if (!hci_conn_auth(conn, sec_level, auth_type))
--
1.7.6
Hi Gustavo
>-----Original Message-----
>From: Gustavo F. Padovan [mailto:[email protected]] On Behalf Of Gustavo
>Padovan
>Sent: Monday, November 07, 2011 7:54 PM
>To: Lichwa Arkadiusz
>Cc: [email protected]; [email protected]; [email protected]
>Subject: Re: [PATCH cover letter] Bluetooth: Revert: Fix L2CAP connection ...
>
>
>* [email protected] <[email protected]> [2011-11-07
>12:06:32 +0200]:
>
>>
>> >From: Gustavo F. Padovan [mailto:[email protected]] On Behalf Of Gustavo
>> >Padovan
>> >Sent: Friday, November 04, 2011 6:18 PM
>> >To: Lichwa Arkadiusz
>> >Cc: [email protected]; [email protected]; [email protected]
>> >Subject: Re: [PATCH cover letter] Bluetooth: Revert: Fix L2CAP connection ...
>> >
>> >Hi Arek,
>> >
>> >* [email protected] <[email protected]> [2011-11-02
>> >09:53:10 +0200]:
>> >
>> >>
>> >> Hi Gustavo
>> >>
>> >> >From: Gustavo F. Padovan [mailto:[email protected]] On Behalf Of
>Gustavo
>> >> >Padovan
>> >> >Sent: Monday, October 31, 2011 8:01 PM
>> >> >To: Lichwa Arkadiusz
>> >> >Cc: [email protected]; [email protected];
>[email protected]
>> >> >Subject: Re: [PATCH cover letter] Bluetooth: Revert: Fix L2CAP connection ...
>> >> >
>> >> >Hi Arek,
>> >> >
>> >> >* Arek Lichwa <[email protected]> [2011-10-26 11:23:21 +0200]:
>> >> >
>> >> >> Hi
>> >> >>
>> >> >> We found during testing problem when setting rfcomm (SPP) channel
>between
>> >> >> two 2.1 devices.
>> >> >> The test case always failed mostly saying security block on l2cap level
>> >> >> but sometimes the fail root cause was 'Command not understood' on l2cap
>> >> >> as well.
>> >> >> Analyzing security block issue, I found that there's unencrypted link when
>> >> >> l2cap command 'connection request' is sent to remote.
>> >> >> The second issue with 'command not understood' has turn out to be related
>to
>> >> >> expiration of l2cap timer and its implications.
>> >> >>
>> >> >> Solution that I found to fix the problem seems to be related to old commit
>> >> >> 330605423ca6eafafb8dcc27502bce1c585d1b06 made by Ilia Kolomisnky.
>> >When
>> >> >there's
>> >> >> authentication ongoing, 'encryption pending' should be turn on, otherwise
>> >> >> there're situations when link stays unencrypted.
>> >> >> The issue with timer expiration is related to Andrzej Kaczmarek's patch
>> >> >> sent to community a couple days ago (~ 2011/10/20).
>> >> >> This patch actually recalculates (repairs) timer values on l2cap which were
>> >> >> wrongly converted before.
>> >> >> With this patch the expiration issue disappears during the test case
>> >> >> I've made, otherwise just reverting
>> >> >330605423ca6eafafb8dcc27502bce1c585d1b06
>> >> >> is not enough, since timer issue blocks very often passing the test case.
>> >> >
>> >> >Are you saying that Andrzej's patch together with revert of 330605423 fixes
>> >> >the problem? and are you sure that we are not creating any new regression?
>> >> >
>> >> > Gustavo
>> >>
>> >> Yes, that's right, it fixes.
>> >> About potencial new regression, I don't think so since previous code before Ilia
>> >made change was stable and verified. Did you asked Ilia about regression report
>> >that time?
>> >
>> >So did you test this in many different cases? with and without SSP, in all
>> >security levels, with and without MITM protection and so on?
>>
>> Hi Gustavo,
>>
>> Should't such scenarios to be run/verified on bluez community's
>> common security regression test framework/set ?
>> Looks like now everyone (I hope) verify against his own and it's not trustable.
>>
>> To your questions, yes, I did, do you belive me ? :)
>
>Ok, I'm applying this one to the bluetooth tree (aka linux 3.2). Thanks.
>
>Also I verified the need of this patch while developing the security patches I
>just sent to the mailing list, it only works if I revert this patch.
>
> Gustavo
Looks like the patch got to be reverted.
More thorough / manual tests showed the problem on setting up subsequent
l2cap channels with legacy devices.
The root cause of generating the patch was security block on l2cap setup what
I've been experiencing and it means no encryption was set on link when testing
ssp (2.1) devices.
On my operational kernel 3.0 branch I've adopted Peter's Hurley patch which
solves the issue. This patch wasn't applied to bluetooth-next branch
but I think it should be in.
Correct me if I'm wrong.
Quoting part of Peter's request ...
From: Peter Hurley <[email protected]>
Date: Mon, Aug 8, 2011 at 7:33 PM
Subject: [PATCH] Bluetooth: Fix l2cap conn failures for ssp devices
To: linux-bluetooth <[email protected]>
<...>
BR,
Arek
* [email protected] <[email protected]> [2011-11-07 12:06:32 +0200]:
>
> >From: Gustavo F. Padovan [mailto:[email protected]] On Behalf Of Gustavo
> >Padovan
> >Sent: Friday, November 04, 2011 6:18 PM
> >To: Lichwa Arkadiusz
> >Cc: [email protected]; [email protected]; [email protected]
> >Subject: Re: [PATCH cover letter] Bluetooth: Revert: Fix L2CAP connection ...
> >
> >Hi Arek,
> >
> >* [email protected] <[email protected]> [2011-11-02
> >09:53:10 +0200]:
> >
> >>
> >> Hi Gustavo
> >>
> >> >From: Gustavo F. Padovan [mailto:[email protected]] On Behalf Of Gustavo
> >> >Padovan
> >> >Sent: Monday, October 31, 2011 8:01 PM
> >> >To: Lichwa Arkadiusz
> >> >Cc: [email protected]; [email protected]; [email protected]
> >> >Subject: Re: [PATCH cover letter] Bluetooth: Revert: Fix L2CAP connection ...
> >> >
> >> >Hi Arek,
> >> >
> >> >* Arek Lichwa <[email protected]> [2011-10-26 11:23:21 +0200]:
> >> >
> >> >> Hi
> >> >>
> >> >> We found during testing problem when setting rfcomm (SPP) channel between
> >> >> two 2.1 devices.
> >> >> The test case always failed mostly saying security block on l2cap level
> >> >> but sometimes the fail root cause was 'Command not understood' on l2cap
> >> >> as well.
> >> >> Analyzing security block issue, I found that there's unencrypted link when
> >> >> l2cap command 'connection request' is sent to remote.
> >> >> The second issue with 'command not understood' has turn out to be related to
> >> >> expiration of l2cap timer and its implications.
> >> >>
> >> >> Solution that I found to fix the problem seems to be related to old commit
> >> >> 330605423ca6eafafb8dcc27502bce1c585d1b06 made by Ilia Kolomisnky.
> >When
> >> >there's
> >> >> authentication ongoing, 'encryption pending' should be turn on, otherwise
> >> >> there're situations when link stays unencrypted.
> >> >> The issue with timer expiration is related to Andrzej Kaczmarek's patch
> >> >> sent to community a couple days ago (~ 2011/10/20).
> >> >> This patch actually recalculates (repairs) timer values on l2cap which were
> >> >> wrongly converted before.
> >> >> With this patch the expiration issue disappears during the test case
> >> >> I've made, otherwise just reverting
> >> >330605423ca6eafafb8dcc27502bce1c585d1b06
> >> >> is not enough, since timer issue blocks very often passing the test case.
> >> >
> >> >Are you saying that Andrzej's patch together with revert of 330605423 fixes
> >> >the problem? and are you sure that we are not creating any new regression?
> >> >
> >> > Gustavo
> >>
> >> Yes, that's right, it fixes.
> >> About potencial new regression, I don't think so since previous code before Ilia
> >made change was stable and verified. Did you asked Ilia about regression report
> >that time?
> >
> >So did you test this in many different cases? with and without SSP, in all
> >security levels, with and without MITM protection and so on?
>
> Hi Gustavo,
>
> Should't such scenarios to be run/verified on bluez community's
> common security regression test framework/set ?
> Looks like now everyone (I hope) verify against his own and it's not trustable.
>
> To your questions, yes, I did, do you belive me ? :)
Ok, I'm applying this one to the bluetooth tree (aka linux 3.2). Thanks.
Also I verified the need of this patch while developing the security patches I
just sent to the mailing list, it only works if I revert this patch.
Gustavo
>From: Gustavo F. Padovan [mailto:[email protected]] On Behalf Of Gustavo
>Padovan
>Sent: Friday, November 04, 2011 6:18 PM
>To: Lichwa Arkadiusz
>Cc: [email protected]; [email protected]; [email protected]
>Subject: Re: [PATCH cover letter] Bluetooth: Revert: Fix L2CAP connection ...
>
>Hi Arek,
>
>* [email protected] <[email protected]> [2011-11-02
>09:53:10 +0200]:
>
>>
>> Hi Gustavo
>>
>> >From: Gustavo F. Padovan [mailto:[email protected]] On Behalf Of Gustavo
>> >Padovan
>> >Sent: Monday, October 31, 2011 8:01 PM
>> >To: Lichwa Arkadiusz
>> >Cc: [email protected]; [email protected]; [email protected]
>> >Subject: Re: [PATCH cover letter] Bluetooth: Revert: Fix L2CAP connection ...
>> >
>> >Hi Arek,
>> >
>> >* Arek Lichwa <[email protected]> [2011-10-26 11:23:21 +0200]:
>> >
>> >> Hi
>> >>
>> >> We found during testing problem when setting rfcomm (SPP) channel between
>> >> two 2.1 devices.
>> >> The test case always failed mostly saying security block on l2cap level
>> >> but sometimes the fail root cause was 'Command not understood' on l2cap
>> >> as well.
>> >> Analyzing security block issue, I found that there's unencrypted link when
>> >> l2cap command 'connection request' is sent to remote.
>> >> The second issue with 'command not understood' has turn out to be related to
>> >> expiration of l2cap timer and its implications.
>> >>
>> >> Solution that I found to fix the problem seems to be related to old commit
>> >> 330605423ca6eafafb8dcc27502bce1c585d1b06 made by Ilia Kolomisnky.
>When
>> >there's
>> >> authentication ongoing, 'encryption pending' should be turn on, otherwise
>> >> there're situations when link stays unencrypted.
>> >> The issue with timer expiration is related to Andrzej Kaczmarek's patch
>> >> sent to community a couple days ago (~ 2011/10/20).
>> >> This patch actually recalculates (repairs) timer values on l2cap which were
>> >> wrongly converted before.
>> >> With this patch the expiration issue disappears during the test case
>> >> I've made, otherwise just reverting
>> >330605423ca6eafafb8dcc27502bce1c585d1b06
>> >> is not enough, since timer issue blocks very often passing the test case.
>> >
>> >Are you saying that Andrzej's patch together with revert of 330605423 fixes
>> >the problem? and are you sure that we are not creating any new regression?
>> >
>> > Gustavo
>>
>> Yes, that's right, it fixes.
>> About potencial new regression, I don't think so since previous code before Ilia
>made change was stable and verified. Did you asked Ilia about regression report
>that time?
>
>So did you test this in many different cases? with and without SSP, in all
>security levels, with and without MITM protection and so on?
Hi Gustavo,
Should't such scenarios to be run/verified on bluez community's
common security regression test framework/set ?
Looks like now everyone (I hope) verify against his own and it's not trustable.
To your questions, yes, I did, do you belive me ? :)
/Arek
Hi Arek,
* [email protected] <[email protected]> [2011-11-02 09:53:10 +0200]:
>
> Hi Gustavo
>
> >From: Gustavo F. Padovan [mailto:[email protected]] On Behalf Of Gustavo
> >Padovan
> >Sent: Monday, October 31, 2011 8:01 PM
> >To: Lichwa Arkadiusz
> >Cc: [email protected]; [email protected]; [email protected]
> >Subject: Re: [PATCH cover letter] Bluetooth: Revert: Fix L2CAP connection ...
> >
> >Hi Arek,
> >
> >* Arek Lichwa <[email protected]> [2011-10-26 11:23:21 +0200]:
> >
> >> Hi
> >>
> >> We found during testing problem when setting rfcomm (SPP) channel between
> >> two 2.1 devices.
> >> The test case always failed mostly saying security block on l2cap level
> >> but sometimes the fail root cause was 'Command not understood' on l2cap
> >> as well.
> >> Analyzing security block issue, I found that there's unencrypted link when
> >> l2cap command 'connection request' is sent to remote.
> >> The second issue with 'command not understood' has turn out to be related to
> >> expiration of l2cap timer and its implications.
> >>
> >> Solution that I found to fix the problem seems to be related to old commit
> >> 330605423ca6eafafb8dcc27502bce1c585d1b06 made by Ilia Kolomisnky. When
> >there's
> >> authentication ongoing, 'encryption pending' should be turn on, otherwise
> >> there're situations when link stays unencrypted.
> >> The issue with timer expiration is related to Andrzej Kaczmarek's patch
> >> sent to community a couple days ago (~ 2011/10/20).
> >> This patch actually recalculates (repairs) timer values on l2cap which were
> >> wrongly converted before.
> >> With this patch the expiration issue disappears during the test case
> >> I've made, otherwise just reverting
> >330605423ca6eafafb8dcc27502bce1c585d1b06
> >> is not enough, since timer issue blocks very often passing the test case.
> >
> >Are you saying that Andrzej's patch together with revert of 330605423 fixes
> >the problem? and are you sure that we are not creating any new regression?
> >
> > Gustavo
>
> Yes, that's right, it fixes.
> About potencial new regression, I don't think so since previous code before Ilia made change was stable and verified. Did you asked Ilia about regression report that time?
So did you test this in many different cases? with and without SSP, in all
security levels, with and without MITM protection and so on?
Gustavo
Hi Arek,
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> Sent: Wednesday, November 02, 2011 9:44 AM
> To: Ilia, Kolominsky; [email protected]
> Cc: [email protected]
> Subject: RE: [PATCH] Bluetooth: Revert: Fix L2CAP connection
> establishment
>
> Hi Ilia
>
> >From: Ilia, Kolominsky [mailto:[email protected]]
> >Sent: Tuesday, November 01, 2011 9:58 AM
> >To: Lichwa Arkadiusz; [email protected]
> >Cc: [email protected]
> >Subject: RE: [PATCH] Bluetooth: Revert: Fix L2CAP connection
> establishment
> >
> >Hi
> >
> >> -----Original Message-----
> >> From: [email protected] [mailto:[email protected]]
> >> Sent: Monday, October 31, 2011 6:00 PM
> >> To: [email protected]
> >> Cc: Ilia, Kolominsky; [email protected];
> >> [email protected]
> >> Subject: RE: [PATCH] Bluetooth: Revert: Fix L2CAP connection
> >> establishment
> >>
> >> Hi
> >>
> >> >Subject: [PATCH] Bluetooth: Revert: Fix L2CAP connection
> establishment
> >> >
> >> >This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06.
> >> >The commit introduces regression when two 2.1 devices attempt
> >> >establish rfcomm channel. Such connection is refused since there's
> >> >a security block issue on l2cap. It means the link is unencrypted.
> >> >
> >> >2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24
> >> > 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff
> >> >[email protected]....??
> >> > 0010: 35 05 0a 00 00 ff ff 00
> 5....??.
> >> >2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets
> >> >(0x13) plen 5
> >> > handle 1 packets 1
> >> >2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88
> >> > L2CAP(d): cid 0x0040 len 84 [psm 0]
> >> > 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00
> >> >....O.L5J5H.....
> >> > 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03
> >> >......5.......5.
> >> > 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02
> >> >......5.5.......
> >> > 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09
> >> >................
> >> > 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05
> >> >...........(....
> >> > 0050: 09 00 02 00 ....
> >> >2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested
> >> >(0x01|0x0011) plen 2
> >> > handle 1
> >> >2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen
> 4
> >> > Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
> >> >2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17)
> plen 6
> >> > bdaddr 00:00:F2:6A:29:69
> >> >2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply
> >> >(0x01|0x000b) plen 22
> >> > bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532
> >> >2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e)
> plen
> >> 10
> >> > Link Key Request Reply (0x01|0x000b) ncmd 1
> >> > status 0x00 bdaddr 00:00:F2:6A:29:69
> >> >2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3
> >> > status 0x00 handle 1
> >> >2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12
> >> > 0000: 08 00 01 00 02 05 04 00 03 00 41 00
> >> ..........A.
> >> >2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen
> 4
> >> > Unknown (0x00|0x0000) status 0x00 ncmd 2
> >> >2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets
> >> >(0x13) plen 5
> >> > handle 1 packets 1
> >> >2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16
> >> > L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status
> 0
> >> > Connection refused - security block
> >> >2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12
> >> > 0000: 08 00 01 00 06 06 04 00 40 00 40 00
> >> ........@.@.
> >> >2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets
> >> >(0x13) plen 5
> >> > handle 1 packets 1
> >> >2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12
> >> > L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> >> >2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006)
> >> plen
> >> >3
> >> > handle 1 reason 0x13
> >> > Reason: Remote User Terminated Connection
> >> >2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen
> 4
> >> > Disconnect (0x01|0x0006) status 0x00 ncmd 1
> >> >2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05)
> plen 4
> >> > status 0x00 handle 1 reason 0x16
> >> > Reason: Connection Terminated by Local Host
> >> >
> >> >Signed-off-by: Arek Lichwa <[email protected]>
> >> >---
> >> > net/bluetooth/hci_conn.c | 2 +-
> >> > 1 files changed, 1 insertions(+), 1 deletions(-)
> >> >
> >> >diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
> >> >index c1c597e..e0af723 100644
> >> >--- a/net/bluetooth/hci_conn.c
> >> >+++ b/net/bluetooth/hci_conn.c
> >> >@@ -673,7 +673,7 @@ int hci_conn_security(struct hci_conn *conn,
> __u8
> >> >sec_level, __u8 auth_type)
> >> > goto encrypt;
> >> >
> >> > auth:
> >> >- if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
> >> >+ if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
> >> > return 0;
> >
> >Wouldn't that bit set in hci_conn_encrypt() the first time
> >hci_conn_security() is called?
>
> This in this case has never happened.
> First time the flow jumps to "auth" label in hci_conn_security().
> On auth_complete_evt the flow overpasses the encryption part since
> the conn->state is not BT_CONFIG and pending HCI_CONN_ENCRYPT_PEND is
> never set. Rfcomm's l2cap is set in motion afterwards.
>
> The question is why you acctually have changed the code?
> Isn't it to be related to too early l2cap timer expirations? ...which
> was also part of some regression that has been fixed in bluetooth-next
> now
> The old code was quite stable, for so pretty long time noone observed
> regression in this area. Am I wrong ?
l2cap connection establishment time out was observed with
a number of old devices that I don't have in my possession now.
So this patch was introduced to fix this issue.
What you are saying seems reasonable, I think we can revert the patch.
In case someone will be able to reproduce this time-out, we will know
where to look
Regards , Ilia.
>
> /Arek
> >
> >> >
> >> > if (!hci_conn_auth(conn, sec_level, auth_type))
> >> >--
> >> >1.7.6
> >>
> >> Is it something unclear in my original post ? Any comments ?
> >> Regression here is quite obvious in my opinion.
> >>
> >> /Arek
Hi Gustavo
>From: Gustavo F. Padovan [mailto:[email protected]] On Behalf Of Gustavo
>Padovan
>Sent: Monday, October 31, 2011 8:01 PM
>To: Lichwa Arkadiusz
>Cc: [email protected]; [email protected]; [email protected]
>Subject: Re: [PATCH cover letter] Bluetooth: Revert: Fix L2CAP connection ...
>
>Hi Arek,
>
>* Arek Lichwa <[email protected]> [2011-10-26 11:23:21 +0200]:
>
>> Hi
>>
>> We found during testing problem when setting rfcomm (SPP) channel between
>> two 2.1 devices.
>> The test case always failed mostly saying security block on l2cap level
>> but sometimes the fail root cause was 'Command not understood' on l2cap
>> as well.
>> Analyzing security block issue, I found that there's unencrypted link when
>> l2cap command 'connection request' is sent to remote.
>> The second issue with 'command not understood' has turn out to be related to
>> expiration of l2cap timer and its implications.
>>
>> Solution that I found to fix the problem seems to be related to old commit
>> 330605423ca6eafafb8dcc27502bce1c585d1b06 made by Ilia Kolomisnky. When
>there's
>> authentication ongoing, 'encryption pending' should be turn on, otherwise
>> there're situations when link stays unencrypted.
>> The issue with timer expiration is related to Andrzej Kaczmarek's patch
>> sent to community a couple days ago (~ 2011/10/20).
>> This patch actually recalculates (repairs) timer values on l2cap which were
>> wrongly converted before.
>> With this patch the expiration issue disappears during the test case
>> I've made, otherwise just reverting
>330605423ca6eafafb8dcc27502bce1c585d1b06
>> is not enough, since timer issue blocks very often passing the test case.
>
>Are you saying that Andrzej's patch together with revert of 330605423 fixes
>the problem? and are you sure that we are not creating any new regression?
>
> Gustavo
Yes, that's right, it fixes.
About potencial new regression, I don't think so since previous code before Ilia made change was stable and verified. Did you asked Ilia about regression report that time?
/Arek
Hi Ilia
>From: Ilia, Kolominsky [mailto:[email protected]]
>Sent: Tuesday, November 01, 2011 9:58 AM
>To: Lichwa Arkadiusz; [email protected]
>Cc: [email protected]
>Subject: RE: [PATCH] Bluetooth: Revert: Fix L2CAP connection establishment
>
>Hi
>
>> -----Original Message-----
>> From: [email protected] [mailto:[email protected]]
>> Sent: Monday, October 31, 2011 6:00 PM
>> To: [email protected]
>> Cc: Ilia, Kolominsky; [email protected];
>> [email protected]
>> Subject: RE: [PATCH] Bluetooth: Revert: Fix L2CAP connection
>> establishment
>>
>> Hi
>>
>> >Subject: [PATCH] Bluetooth: Revert: Fix L2CAP connection establishment
>> >
>> >This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06.
>> >The commit introduces regression when two 2.1 devices attempt
>> >establish rfcomm channel. Such connection is refused since there's
>> >a security block issue on l2cap. It means the link is unencrypted.
>> >
>> >2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24
>> > 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff
>> >[email protected]....??
>> > 0010: 35 05 0a 00 00 ff ff 00 5....??.
>> >2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets
>> >(0x13) plen 5
>> > handle 1 packets 1
>> >2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88
>> > L2CAP(d): cid 0x0040 len 84 [psm 0]
>> > 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00
>> >....O.L5J5H.....
>> > 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03
>> >......5.......5.
>> > 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02
>> >......5.5.......
>> > 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09
>> >................
>> > 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05
>> >...........(....
>> > 0050: 09 00 02 00 ....
>> >2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested
>> >(0x01|0x0011) plen 2
>> > handle 1
>> >2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4
>> > Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
>> >2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6
>> > bdaddr 00:00:F2:6A:29:69
>> >2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply
>> >(0x01|0x000b) plen 22
>> > bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532
>> >2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen
>> 10
>> > Link Key Request Reply (0x01|0x000b) ncmd 1
>> > status 0x00 bdaddr 00:00:F2:6A:29:69
>> >2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3
>> > status 0x00 handle 1
>> >2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12
>> > 0000: 08 00 01 00 02 05 04 00 03 00 41 00
>> ..........A.
>> >2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4
>> > Unknown (0x00|0x0000) status 0x00 ncmd 2
>> >2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets
>> >(0x13) plen 5
>> > handle 1 packets 1
>> >2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16
>> > L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0
>> > Connection refused - security block
>> >2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12
>> > 0000: 08 00 01 00 06 06 04 00 40 00 40 00
>> ........@.@.
>> >2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets
>> >(0x13) plen 5
>> > handle 1 packets 1
>> >2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12
>> > L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
>> >2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006)
>> plen
>> >3
>> > handle 1 reason 0x13
>> > Reason: Remote User Terminated Connection
>> >2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4
>> > Disconnect (0x01|0x0006) status 0x00 ncmd 1
>> >2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4
>> > status 0x00 handle 1 reason 0x16
>> > Reason: Connection Terminated by Local Host
>> >
>> >Signed-off-by: Arek Lichwa <[email protected]>
>> >---
>> > net/bluetooth/hci_conn.c | 2 +-
>> > 1 files changed, 1 insertions(+), 1 deletions(-)
>> >
>> >diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
>> >index c1c597e..e0af723 100644
>> >--- a/net/bluetooth/hci_conn.c
>> >+++ b/net/bluetooth/hci_conn.c
>> >@@ -673,7 +673,7 @@ int hci_conn_security(struct hci_conn *conn, __u8
>> >sec_level, __u8 auth_type)
>> > goto encrypt;
>> >
>> > auth:
>> >- if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
>> >+ if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
>> > return 0;
>
>Wouldn't that bit set in hci_conn_encrypt() the first time
>hci_conn_security() is called?
This in this case has never happened.
First time the flow jumps to "auth" label in hci_conn_security().
On auth_complete_evt the flow overpasses the encryption part since
the conn->state is not BT_CONFIG and pending HCI_CONN_ENCRYPT_PEND is never set. Rfcomm's l2cap is set in motion afterwards.
The question is why you acctually have changed the code?
Isn't it to be related to too early l2cap timer expirations? ...which was also part of some regression that has been fixed in bluetooth-next now
The old code was quite stable, for so pretty long time noone observed regression in this area. Am I wrong ?
/Arek
>
>> >
>> > if (!hci_conn_auth(conn, sec_level, auth_type))
>> >--
>> >1.7.6
>>
>> Is it something unclear in my original post ? Any comments ?
>> Regression here is quite obvious in my opinion.
>>
>> /Arek
Hi
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> Sent: Monday, October 31, 2011 6:00 PM
> To: [email protected]
> Cc: Ilia, Kolominsky; [email protected];
> [email protected]
> Subject: RE: [PATCH] Bluetooth: Revert: Fix L2CAP connection
> establishment
>
> Hi
>
> >Subject: [PATCH] Bluetooth: Revert: Fix L2CAP connection establishment
> >
> >This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06.
> >The commit introduces regression when two 2.1 devices attempt
> >establish rfcomm channel. Such connection is refused since there's
> >a security block issue on l2cap. It means the link is unencrypted.
> >
> >2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24
> > 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff
> >[email protected]....??
> > 0010: 35 05 0a 00 00 ff ff 00 5....??.
> >2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets
> >(0x13) plen 5
> > handle 1 packets 1
> >2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88
> > L2CAP(d): cid 0x0040 len 84 [psm 0]
> > 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00
> >....O.L5J5H.....
> > 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03
> >......5.......5.
> > 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02
> >......5.5.......
> > 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09
> >................
> > 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05
> >...........(....
> > 0050: 09 00 02 00 ....
> >2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested
> >(0x01|0x0011) plen 2
> > handle 1
> >2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4
> > Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
> >2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6
> > bdaddr 00:00:F2:6A:29:69
> >2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply
> >(0x01|0x000b) plen 22
> > bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532
> >2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen
> 10
> > Link Key Request Reply (0x01|0x000b) ncmd 1
> > status 0x00 bdaddr 00:00:F2:6A:29:69
> >2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3
> > status 0x00 handle 1
> >2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12
> > 0000: 08 00 01 00 02 05 04 00 03 00 41 00
> ..........A.
> >2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4
> > Unknown (0x00|0x0000) status 0x00 ncmd 2
> >2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets
> >(0x13) plen 5
> > handle 1 packets 1
> >2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16
> > L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0
> > Connection refused - security block
> >2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12
> > 0000: 08 00 01 00 06 06 04 00 40 00 40 00
> ........@.@.
> >2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets
> >(0x13) plen 5
> > handle 1 packets 1
> >2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12
> > L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> >2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006)
> plen
> >3
> > handle 1 reason 0x13
> > Reason: Remote User Terminated Connection
> >2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4
> > Disconnect (0x01|0x0006) status 0x00 ncmd 1
> >2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4
> > status 0x00 handle 1 reason 0x16
> > Reason: Connection Terminated by Local Host
> >
> >Signed-off-by: Arek Lichwa <[email protected]>
> >---
> > net/bluetooth/hci_conn.c | 2 +-
> > 1 files changed, 1 insertions(+), 1 deletions(-)
> >
> >diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
> >index c1c597e..e0af723 100644
> >--- a/net/bluetooth/hci_conn.c
> >+++ b/net/bluetooth/hci_conn.c
> >@@ -673,7 +673,7 @@ int hci_conn_security(struct hci_conn *conn, __u8
> >sec_level, __u8 auth_type)
> > goto encrypt;
> >
> > auth:
> >- if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
> >+ if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
> > return 0;
Wouldn't that bit set in hci_conn_encrypt() the first time
hci_conn_security() is called?
> >
> > if (!hci_conn_auth(conn, sec_level, auth_type))
> >--
> >1.7.6
>
> Is it something unclear in my original post ? Any comments ?
> Regression here is quite obvious in my opinion.
>
> /Arek
On Sun, Dec 18, 2011 at 10:36:52PM -0200, Gustavo Padovan wrote:
> Hi David,
>
> * David Fries <[email protected]> [2011-12-10 23:16:24 -0600]:
>
> > On Mon, Oct 31, 2011 at 05:01:29PM -0200, Gustavo Padovan wrote:
> > > Hi Arek,
> > >
> > > * Arek Lichwa <[email protected]> [2011-10-26 11:23:21 +0200]:
> > >
> > > > Hi
> > > >
> > > > We found during testing problem when setting rfcomm (SPP) channel between
> > > > two 2.1 devices.
> > > > The test case always failed mostly saying security block on l2cap level
> > > > but sometimes the fail root cause was 'Command not understood' on l2cap
> > > > as well.
> > > > Analyzing security block issue, I found that there's unencrypted link when
> > > > l2cap command 'connection request' is sent to remote.
> > > > The second issue with 'command not understood' has turn out to be related to
> > > > expiration of l2cap timer and its implications.
> > > >
> > > > Solution that I found to fix the problem seems to be related to old commit
> > > > 330605423ca6eafafb8dcc27502bce1c585d1b06 made by Ilia Kolomisnky. When there's
> > > > authentication ongoing, 'encryption pending' should be turn on, otherwise
> > > > there're situations when link stays unencrypted.
> > > > The issue with timer expiration is related to Andrzej Kaczmarek's patch
> > > > sent to community a couple days ago (~ 2011/10/20).
> > > > This patch actually recalculates (repairs) timer values on l2cap which were
> > > > wrongly converted before.
> > > > With this patch the expiration issue disappears during the test case
> > > > I've made, otherwise just reverting 330605423ca6eafafb8dcc27502bce1c585d1b06
> > > > is not enough, since timer issue blocks very often passing the test case.
> > >
> > > Are you saying that Andrzej's patch together with revert of 330605423 fixes
> > > the problem? and are you sure that we are not creating any new regression?
> > >
> > > Gustavo
> >
> > I just found that I can't connect rfcomm any more from Linux (desktop)
> > to Linux (N900) with bluetooth. On the desktop side, 3.2.0-rc2 works,
> > but 3.2.0-rc3 (and on) fails, I even merged in
> > git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next
> > master 5a13b09531420d230616bd524b68a5b0c23cd487 without any change.
> > Fortunately there were only three bluetooth patches between rc2 and rc3.
> > Reverting 4dff523a913197e3314c7b0d08734ab037709093 fixed the issue and
> > I can connect again.
>
> I wen ahead and reverted this one.
>
> Gustavo
Thanks. It's unfortunate that it seems some devices seem to have
mutually incompatible options. I'll volunteer to test against the
N900 if there are any patches in the future that try to make both
types work if I'm made aware of the change.
Here's the N900 kernel-power's net/bluetooth/hci_conn.c
at least it was interesting to me that it does the test_and_set_bit
that causes my desktop to be unable to connect with it. N900 is based
on 2.6.28 though the N900 version of that file is almost a match with
2.6.31.
/* Enable security */
int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
{
BT_DBG("conn %p", conn);
if (sec_level == BT_SECURITY_SDP)
return 1;
if (sec_level == BT_SECURITY_LOW &&
(!conn->ssp_mode || !conn->hdev->ssp_mode))
return 1;
if (conn->link_mode & HCI_LM_ENCRYPT)
return hci_conn_auth(conn, sec_level, auth_type);
if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
return 0;
if (hci_conn_auth(conn, sec_level, auth_type)) {
struct hci_cp_set_conn_encrypt cp;
cp.handle = cpu_to_le16(conn->handle);
cp.encrypt = 1;
hci_send_cmd(conn->hdev, HCI_OP_SET_CONN_ENCRYPT,
sizeof(cp), &cp);
}
return 0;
}
After failing to connect to the N900 both with and without it reverted
I rebooted the N900, and double checked. I could connect with
4dff523a913197e33 reverted, but I still got the 'Connection reset by
peer' without the patch reverted, not sure what went wrong on the N900
for a bit to cause both to fail and yet connect to bluetooth audio
devices, but it does need it reverted to work.
--
David Fries <[email protected]> PGP pub CB1EE8F0
http://fries.net/~david/
Hi David,
* David Fries <[email protected]> [2011-12-10 23:16:24 -0600]:
> On Mon, Oct 31, 2011 at 05:01:29PM -0200, Gustavo Padovan wrote:
> > Hi Arek,
> >
> > * Arek Lichwa <[email protected]> [2011-10-26 11:23:21 +0200]:
> >
> > > Hi
> > >
> > > We found during testing problem when setting rfcomm (SPP) channel between
> > > two 2.1 devices.
> > > The test case always failed mostly saying security block on l2cap level
> > > but sometimes the fail root cause was 'Command not understood' on l2cap
> > > as well.
> > > Analyzing security block issue, I found that there's unencrypted link when
> > > l2cap command 'connection request' is sent to remote.
> > > The second issue with 'command not understood' has turn out to be related to
> > > expiration of l2cap timer and its implications.
> > >
> > > Solution that I found to fix the problem seems to be related to old commit
> > > 330605423ca6eafafb8dcc27502bce1c585d1b06 made by Ilia Kolomisnky. When there's
> > > authentication ongoing, 'encryption pending' should be turn on, otherwise
> > > there're situations when link stays unencrypted.
> > > The issue with timer expiration is related to Andrzej Kaczmarek's patch
> > > sent to community a couple days ago (~ 2011/10/20).
> > > This patch actually recalculates (repairs) timer values on l2cap which were
> > > wrongly converted before.
> > > With this patch the expiration issue disappears during the test case
> > > I've made, otherwise just reverting 330605423ca6eafafb8dcc27502bce1c585d1b06
> > > is not enough, since timer issue blocks very often passing the test case.
> >
> > Are you saying that Andrzej's patch together with revert of 330605423 fixes
> > the problem? and are you sure that we are not creating any new regression?
> >
> > Gustavo
>
> I just found that I can't connect rfcomm any more from Linux (desktop)
> to Linux (N900) with bluetooth. On the desktop side, 3.2.0-rc2 works,
> but 3.2.0-rc3 (and on) fails, I even merged in
> git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next
> master 5a13b09531420d230616bd524b68a5b0c23cd487 without any change.
> Fortunately there were only three bluetooth patches between rc2 and rc3.
> Reverting 4dff523a913197e3314c7b0d08734ab037709093 fixed the issue and
> I can connect again.
I wen ahead and reverted this one.
Gustavo
On Mon, Oct 31, 2011 at 05:01:29PM -0200, Gustavo Padovan wrote:
> Hi Arek,
>
> * Arek Lichwa <[email protected]> [2011-10-26 11:23:21 +0200]:
>
> > Hi
> >
> > We found during testing problem when setting rfcomm (SPP) channel between
> > two 2.1 devices.
> > The test case always failed mostly saying security block on l2cap level
> > but sometimes the fail root cause was 'Command not understood' on l2cap
> > as well.
> > Analyzing security block issue, I found that there's unencrypted link when
> > l2cap command 'connection request' is sent to remote.
> > The second issue with 'command not understood' has turn out to be related to
> > expiration of l2cap timer and its implications.
> >
> > Solution that I found to fix the problem seems to be related to old commit
> > 330605423ca6eafafb8dcc27502bce1c585d1b06 made by Ilia Kolomisnky. When there's
> > authentication ongoing, 'encryption pending' should be turn on, otherwise
> > there're situations when link stays unencrypted.
> > The issue with timer expiration is related to Andrzej Kaczmarek's patch
> > sent to community a couple days ago (~ 2011/10/20).
> > This patch actually recalculates (repairs) timer values on l2cap which were
> > wrongly converted before.
> > With this patch the expiration issue disappears during the test case
> > I've made, otherwise just reverting 330605423ca6eafafb8dcc27502bce1c585d1b06
> > is not enough, since timer issue blocks very often passing the test case.
>
> Are you saying that Andrzej's patch together with revert of 330605423 fixes
> the problem? and are you sure that we are not creating any new regression?
>
> Gustavo
I just found that I can't connect rfcomm any more from Linux (desktop)
to Linux (N900) with bluetooth. On the desktop side, 3.2.0-rc2 works,
but 3.2.0-rc3 (and on) fails, I even merged in
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next
master 5a13b09531420d230616bd524b68a5b0c23cd487 without any change.
Fortunately there were only three bluetooth patches between rc2 and rc3.
Reverting 4dff523a913197e3314c7b0d08734ab037709093 fixed the issue and
I can connect again.
Linux (desktop)
hci0: Type: BR/EDR Bus: USB
BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:1846 acl:16 sco:0 events:70 errors:0
TX bytes:1223 acl:15 sco:0 commands:44 errors:0
Linux (N900)
hci0: Type: UART
BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 1017:4 SCO MTU: 64:1
UP RUNNING PSCAN
RX bytes:24972 acl:536 sco:0 events:784 errors:0
TX bytes:32590 acl:520 sco:0 commands:217 errors:0
I'm trying to connect to N900 running Linux 2.6.28.10-power49+. While
I can apply patches to the N900 kernel, and the community edition
power kernel is making bug releases, I have no expectation that the
stock Nokia kernel will have another release. So I don't think this
can be fixed on the N900 side.
Here's a diff of a dump using both a working and not working kernel.
`rfcomm connect /dev/rfcomm0 XX:XX:XX:XX:XX:XX 1`
from the desktop side to the N900. The connection is established with
3.2.0-rc2+ but not with 3.2.0-rc5+.
-Linux Pulsar 3.2.0-rc2+ #12 SMP Mon Nov 21 18:30:39 CST 2011 x86_64 GNU/Linux
+Linux Pulsar 3.2.0-rc5+ #16 SMP Sat Dec 10 20:09:18 CST 2011 x86_64 GNU/Linux
hcidump -X
HCI sniffer - Bluetooth packet analyzer ver 2.1
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr XX:XX:XX:XX:XX:XX ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr XX:XX:XX:XX:XX:XX role 0x01
Role: Slave
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 38 bdaddr XX:XX:XX:XX:XX:XX type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 38
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr XX:XX:XX:XX:XX:XX mode 0
> HCI Event: Max Slots Change (0x1b) plen 3
handle 38 slots 5
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 38
Features: 0xbf 0xee 0x0f 0xc6 0x98 0x3d 0x59 0x82
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
handle 38 page 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> HCI Event: Read Remote Extended Features (0x23) plen 13
status 0x00 handle 38 page 1 max 1
Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr XX:XX:XX:XX:XX:XX mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr XX:XX:XX:XX:XX:XX name 'XXXXXXXXXXXXXX_900'
< HCI Command: Authentication Requested (0x01|0x0011) plen 2
handle 38
> HCI Event: Command Status (0x0f) plen 4
Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
bdaddr XX:XX:XX:XX:XX:XX
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr XX:XX:XX:XX:XX:XX key XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Reply (0x01|0x000b) ncmd 1
status 0x00 bdaddr XX:XX:XX:XX:XX:XX
> HCI Event: Auth Complete (0x06) plen 3
status 0x00 handle 38
< HCI Command: Set Connection Encryption (0x01|0x0013) plen 3
handle 38 encrypt 0x01
> HCI Event: Command Status (0x0f) plen 4
Set Connection Encryption (0x01|0x0013) status 0x00 ncmd 1
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 38 encrypt 0x01
< ACL data: handle 38 flags 0x00 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 38 packets 1
> ACL data: handle 38 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0000
< ACL data: handle 38 flags 0x00 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 38 packets 1
> ACL data: handle 38 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 0
Connection pending - No futher information available
> ACL data: handle 38 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
< ACL data: handle 38 flags 0x00 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x00b8
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 38 packets 1
> ACL data: handle 38 flags 0x02 dlen 10
L2CAP(s): Info req: type 3
< ACL data: handle 38 flags 0x00 dlen 20
L2CAP(s): Info rsp: type 3 result 0
Fixed channel list
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 38 packets 1
> ACL data: handle 38 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 38 flags 0x00 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1013
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 38 packets 1
> ACL data: handle 38 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 1013
> ACL data: handle 38 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1013
< ACL data: handle 38 flags 0x00 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 1013
< ACL data: handle 38 flags 0x00 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 38 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 38 packets 1
> ACL data: handle 38 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
-< ACL data: handle 38 flags 0x00 dlen 18
- L2CAP(d): cid 0x0040 len 14 [psm 3]
- RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
- dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
- frame_size 1008 max_retrans 0 credits 7
-> HCI Event: Number of Completed Packets (0x13) plen 5
- handle 38 packets 1
-> ACL data: handle 38 flags 0x02 dlen 18
- L2CAP(d): cid 0x0040 len 14 [psm 3]
- RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
- dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
- frame_size 1008 max_retrans 0 credits 7
-< ACL data: handle 38 flags 0x00 dlen 8
- L2CAP(d): cid 0x0040 len 4 [psm 3]
- RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
-> HCI Event: Number of Completed Packets (0x13) plen 5
- handle 38 packets 1
-> ACL data: handle 38 flags 0x02 dlen 8
- L2CAP(d): cid 0x0040 len 4 [psm 3]
- RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
-< ACL data: handle 38 flags 0x00 dlen 12
- L2CAP(d): cid 0x0040 len 8 [psm 3]
- RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
- dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
-> ACL data: handle 38 flags 0x02 dlen 12
- L2CAP(d): cid 0x0040 len 8 [psm 3]
- RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
- dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
-< ACL data: handle 38 flags 0x00 dlen 12
- L2CAP(d): cid 0x0040 len 8 [psm 3]
- RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
- dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
-> HCI Event: Number of Completed Packets (0x13) plen 5
- handle 38 packets 1
-> ACL data: handle 38 flags 0x02 dlen 12
- L2CAP(d): cid 0x0040 len 8 [psm 3]
- RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
- dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
-< ACL data: handle 38 flags 0x00 dlen 9
- L2CAP(d): cid 0x0040 len 5 [psm 3]
- RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 33
-> HCI Event: Number of Completed Packets (0x13) plen 5
- handle 38 packets 1
-> HCI Event: Number of Completed Packets (0x13) plen 5
- handle 38 packets 1
-> ACL data: handle 38 flags 0x02 dlen 9
- L2CAP(d): cid 0x0040 len 5 [psm 3]
- RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 33
-
< ACL data: handle 38 flags 0x00 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 2 pf 1 ilen 0 fcs 0xb8
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 38 packets 1
> ACL data: handle 38 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
- RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
+ RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
--
David Fries <[email protected]> PGP pub CB1EE8F0
http://fries.net/~david/
Hi Arek,
* [email protected] <[email protected]> [2011-11-22 15:27:17 +0200]:
> Hi Gustavo
>
> >-----Original Message-----
> >From: Gustavo F. Padovan [mailto:[email protected]] On Behalf Of Gustavo
> >Padovan
> >Sent: Monday, November 07, 2011 7:54 PM
> >To: Lichwa Arkadiusz
> >Cc: [email protected]; [email protected]; [email protected]
> >Subject: Re: [PATCH cover letter] Bluetooth: Revert: Fix L2CAP connection ...
> >
> >
> >* [email protected] <[email protected]> [2011-11-07
> >12:06:32 +0200]:
> >
> >>
> >> >From: Gustavo F. Padovan [mailto:[email protected]] On Behalf Of Gustavo
> >> >Padovan
> >> >Sent: Friday, November 04, 2011 6:18 PM
> >> >To: Lichwa Arkadiusz
> >> >Cc: [email protected]; [email protected]; [email protected]
> >> >Subject: Re: [PATCH cover letter] Bluetooth: Revert: Fix L2CAP connection ...
> >> >
> >> >Hi Arek,
> >> >
> >> >* [email protected] <[email protected]> [2011-11-02
> >> >09:53:10 +0200]:
> >> >
> >> >>
> >> >> Hi Gustavo
> >> >>
> >> >> >From: Gustavo F. Padovan [mailto:[email protected]] On Behalf Of
> >Gustavo
> >> >> >Padovan
> >> >> >Sent: Monday, October 31, 2011 8:01 PM
> >> >> >To: Lichwa Arkadiusz
> >> >> >Cc: [email protected]; [email protected];
> >[email protected]
> >> >> >Subject: Re: [PATCH cover letter] Bluetooth: Revert: Fix L2CAP connection ...
> >> >> >
> >> >> >Hi Arek,
> >> >> >
> >> >> >* Arek Lichwa <[email protected]> [2011-10-26 11:23:21 +0200]:
> >> >> >
> >> >> >> Hi
> >> >> >>
> >> >> >> We found during testing problem when setting rfcomm (SPP) channel
> >between
> >> >> >> two 2.1 devices.
> >> >> >> The test case always failed mostly saying security block on l2cap level
> >> >> >> but sometimes the fail root cause was 'Command not understood' on l2cap
> >> >> >> as well.
> >> >> >> Analyzing security block issue, I found that there's unencrypted link when
> >> >> >> l2cap command 'connection request' is sent to remote.
> >> >> >> The second issue with 'command not understood' has turn out to be related
> >to
> >> >> >> expiration of l2cap timer and its implications.
> >> >> >>
> >> >> >> Solution that I found to fix the problem seems to be related to old commit
> >> >> >> 330605423ca6eafafb8dcc27502bce1c585d1b06 made by Ilia Kolomisnky.
> >> >When
> >> >> >there's
> >> >> >> authentication ongoing, 'encryption pending' should be turn on, otherwise
> >> >> >> there're situations when link stays unencrypted.
> >> >> >> The issue with timer expiration is related to Andrzej Kaczmarek's patch
> >> >> >> sent to community a couple days ago (~ 2011/10/20).
> >> >> >> This patch actually recalculates (repairs) timer values on l2cap which were
> >> >> >> wrongly converted before.
> >> >> >> With this patch the expiration issue disappears during the test case
> >> >> >> I've made, otherwise just reverting
> >> >> >330605423ca6eafafb8dcc27502bce1c585d1b06
> >> >> >> is not enough, since timer issue blocks very often passing the test case.
> >> >> >
> >> >> >Are you saying that Andrzej's patch together with revert of 330605423 fixes
> >> >> >the problem? and are you sure that we are not creating any new regression?
> >> >> >
> >> >> > Gustavo
> >> >>
> >> >> Yes, that's right, it fixes.
> >> >> About potencial new regression, I don't think so since previous code before Ilia
> >> >made change was stable and verified. Did you asked Ilia about regression report
> >> >that time?
> >> >
> >> >So did you test this in many different cases? with and without SSP, in all
> >> >security levels, with and without MITM protection and so on?
> >>
> >> Hi Gustavo,
> >>
> >> Should't such scenarios to be run/verified on bluez community's
> >> common security regression test framework/set ?
> >> Looks like now everyone (I hope) verify against his own and it's not trustable.
> >>
> >> To your questions, yes, I did, do you belive me ? :)
> >
> >Ok, I'm applying this one to the bluetooth tree (aka linux 3.2). Thanks.
> >
> >Also I verified the need of this patch while developing the security patches I
> >just sent to the mailing list, it only works if I revert this patch.
> >
> > Gustavo
>
> Looks like the patch got to be reverted.
> More thorough / manual tests showed the problem on setting up subsequent
> l2cap channels with legacy devices.
What goes wrong? security block? Why does it happen?
Gustavo