From: Ram Malovany <[email protected]>
During search of devices, HCI Remote Name Request Command is sent for
every device which name was not included in inquiry result. But the
same command is also sent during incoming connection establishing
procedure. Function hci_check_pending_name() was fixed in order to
handle this situation which led to a kernel crash when initiating
an incoming connection from a device that was not found in the
inquiry while doing a search. There is no need to continue resolving
the next name if we get the request from the incoming connection
procedure as it will be done upon receiving another remote name
request complete event
Signed-off-by: Ram Malovany <[email protected]>
---
net/bluetooth/hci_event.c | 16 ++++++++++++----
1 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 41ff978..654b170 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1365,7 +1365,7 @@ static bool hci_resolve_next_name(struct hci_dev *hdev)
return false;
e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY, NAME_NEEDED);
- if (hci_resolve_name(hdev, e) == 0) {
+ if (e && hci_resolve_name(hdev, e) == 0) {
e->name_state = NAME_PENDING;
return true;
}
@@ -1379,6 +1379,9 @@ static void hci_check_pending_name(struct hci_dev *hdev, struct hci_conn *conn,
struct discovery_state *discov = &hdev->discovery;
struct inquiry_entry *e;
+ BT_DBG("name %p, name_len %d, discov->state %d",
+ name, name_len, discov->state);
+
if (conn && !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
mgmt_device_connected(hdev, bdaddr, ACL_LINK, 0x00, 0, name,
name_len, conn->dev_class);
@@ -1394,11 +1397,16 @@ static void hci_check_pending_name(struct hci_dev *hdev, struct hci_conn *conn,
e = hci_inquiry_cache_lookup_resolve(hdev, bdaddr, NAME_PENDING);
if (e) {
- e->name_state = NAME_KNOWN;
list_del(&e->list);
- if (name)
+ if (name) {
+ e->name_state = NAME_KNOWN;
mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00,
e->data.rssi, name, name_len);
+ } else {
+ e->name_state = NAME_NOT_KNOWN;
+ }
+ } else {
+ return;
}
if (hci_resolve_next_name(hdev))
@@ -1996,7 +2004,7 @@ static void hci_remote_name_evt(struct hci_dev *hdev, struct sk_buff *skb)
struct hci_ev_remote_name *ev = (void *) skb->data;
struct hci_conn *conn;
- BT_DBG("%s", hdev->name);
+ BT_DBG("%s, status %d", hdev->name, ev->status);
hci_conn_check_pending(hdev);
--
1.7.4.1
Hi Andrei,
> -----Original Message-----
> From: Andrei Emeltchenko [mailto:[email protected]]
> Sent: Tuesday, July 17, 2012 5:18 PM
> To: Malovany, Ram
> Cc: [email protected]
> Subject: Re: [PATCH] Bluetooth: Device Scan and connection collision fix
>
> Hi Ram,
>
> On Tue, Jul 17, 2012 at 04:52:06PM +0300, [email protected] wrote:
> > From: Ram Malovany <[email protected]>
> >
> > During search of devices, HCI Remote Name Request Command is sent for
> > every device which name was not included in inquiry result. But the
> > same command is also sent during incoming connection establishing
> > procedure. Function hci_check_pending_name() was fixed in order to
> > handle this situation which led to a kernel crash when initiating
> > an incoming connection from a device that was not found in the
> > inquiry while doing a search. There is no need to continue resolving
> > the next name if we get the request from the incoming connection
> > procedure as it will be done upon receiving another remote name
> > request complete event
> >
> > Signed-off-by: Ram Malovany <[email protected]>
> > ---
> > net/bluetooth/hci_event.c | 16 ++++++++++++----
> > 1 files changed, 12 insertions(+), 4 deletions(-)
> >
> > diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> > index 41ff978..654b170 100644
> > --- a/net/bluetooth/hci_event.c
> > +++ b/net/bluetooth/hci_event.c
> > @@ -1365,7 +1365,7 @@ static bool hci_resolve_next_name(struct hci_dev
> *hdev)
> > return false;
> >
> > e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY, NAME_NEEDED);
> > - if (hci_resolve_name(hdev, e) == 0) {
> > + if (e && hci_resolve_name(hdev, e) == 0) {
>
> good catch
>
> > e->name_state = NAME_PENDING;
> > return true;
> > }
> > @@ -1379,6 +1379,9 @@ static void hci_check_pending_name(struct hci_dev
> *hdev, struct hci_conn *conn,
> > struct discovery_state *discov = &hdev->discovery;
> > struct inquiry_entry *e;
> >
> > + BT_DBG("name %p, name_len %d, discov->state %d",
> > + name, name_len, discov->state);
>
> wrong indentation
>
> > +
> > if (conn && !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
> > mgmt_device_connected(hdev, bdaddr, ACL_LINK, 0x00, 0, name,
> > name_len, conn->dev_class);
> > @@ -1394,11 +1397,16 @@ static void hci_check_pending_name(struct hci_dev
> *hdev, struct hci_conn *conn,
> >
> > e = hci_inquiry_cache_lookup_resolve(hdev, bdaddr, NAME_PENDING);
> > if (e) {
> > - e->name_state = NAME_KNOWN;
> > list_del(&e->list);
> > - if (name)
> > + if (name) {
> > + e->name_state = NAME_KNOWN;
> > mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00,
> > e->data.rssi, name, name_len);
> > + } else {
> > + e->name_state = NAME_NOT_KNOWN;
> > + }
> > + } else {
> > + return;
> > }
> >
> > if (hci_resolve_next_name(hdev))
> > @@ -1996,7 +2004,7 @@ static void hci_remote_name_evt(struct hci_dev *hdev,
> struct sk_buff *skb)
> > struct hci_ev_remote_name *ev = (void *) skb->data;
> > struct hci_conn *conn;
> >
> > - BT_DBG("%s", hdev->name);
> > + BT_DBG("%s, status %d", hdev->name, ev->status);
>
> please use 0x%2.2x for status
>
> Best regards
> Andrei Emeltchenko
Will fix it.
Thanks,
Ram
Hi Ram,
On Tue, Jul 17, 2012 at 04:52:06PM +0300, [email protected] wrote:
> From: Ram Malovany <[email protected]>
>
> During search of devices, HCI Remote Name Request Command is sent for
> every device which name was not included in inquiry result. But the
> same command is also sent during incoming connection establishing
> procedure. Function hci_check_pending_name() was fixed in order to
> handle this situation which led to a kernel crash when initiating
> an incoming connection from a device that was not found in the
> inquiry while doing a search. There is no need to continue resolving
> the next name if we get the request from the incoming connection
> procedure as it will be done upon receiving another remote name
> request complete event
>
> Signed-off-by: Ram Malovany <[email protected]>
> ---
> net/bluetooth/hci_event.c | 16 ++++++++++++----
> 1 files changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> index 41ff978..654b170 100644
> --- a/net/bluetooth/hci_event.c
> +++ b/net/bluetooth/hci_event.c
> @@ -1365,7 +1365,7 @@ static bool hci_resolve_next_name(struct hci_dev *hdev)
> return false;
>
> e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY, NAME_NEEDED);
> - if (hci_resolve_name(hdev, e) == 0) {
> + if (e && hci_resolve_name(hdev, e) == 0) {
good catch
> e->name_state = NAME_PENDING;
> return true;
> }
> @@ -1379,6 +1379,9 @@ static void hci_check_pending_name(struct hci_dev *hdev, struct hci_conn *conn,
> struct discovery_state *discov = &hdev->discovery;
> struct inquiry_entry *e;
>
> + BT_DBG("name %p, name_len %d, discov->state %d",
> + name, name_len, discov->state);
wrong indentation
> +
> if (conn && !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
> mgmt_device_connected(hdev, bdaddr, ACL_LINK, 0x00, 0, name,
> name_len, conn->dev_class);
> @@ -1394,11 +1397,16 @@ static void hci_check_pending_name(struct hci_dev *hdev, struct hci_conn *conn,
>
> e = hci_inquiry_cache_lookup_resolve(hdev, bdaddr, NAME_PENDING);
> if (e) {
> - e->name_state = NAME_KNOWN;
> list_del(&e->list);
> - if (name)
> + if (name) {
> + e->name_state = NAME_KNOWN;
> mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00,
> e->data.rssi, name, name_len);
> + } else {
> + e->name_state = NAME_NOT_KNOWN;
> + }
> + } else {
> + return;
> }
>
> if (hci_resolve_next_name(hdev))
> @@ -1996,7 +2004,7 @@ static void hci_remote_name_evt(struct hci_dev *hdev, struct sk_buff *skb)
> struct hci_ev_remote_name *ev = (void *) skb->data;
> struct hci_conn *conn;
>
> - BT_DBG("%s", hdev->name);
> + BT_DBG("%s, status %d", hdev->name, ev->status);
please use 0x%2.2x for status
Best regards
Andrei Emeltchenko