2013-02-19 16:54:16

by Josh Boyer

Subject: [PATCH] bluetooth: Add support for atheros 04ca:3004 device to ath3k

Yet another version of the atheros bluetooth chipset

T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=3004 Rev=00.01
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

This resolves https://bugzilla.redhat.com/show_bug.cgi?id=844750

Reported-by: [email protected]
Signed-off-by: Josh Boyer <[email protected]>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 33c9a44..b9908dd 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -76,6 +76,7 @@ static struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0CF3, 0x3004) },
{ USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x13d3, 0x3375) },
+ { USB_DEVICE(0x04CA, 0x3004) },
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x04CA, 0x3006) },
{ USB_DEVICE(0x04CA, 0x3008) },
@@ -108,6 +109,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 7e351e3..59cde8e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -134,6 +134,7 @@ static struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
--
1.8.1.2

2013-02-20 17:31:30

by Gustavo Padovan

Subject: Re: [PATCH] bluetooth: Add support for atheros 04ca:3004 device to ath3k

Hi Josh,

* Josh Boyer <[email protected]> [2013-02-19 11:54:16 -0500]:

> Yet another version of the atheros bluetooth chipset
>
> T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=04ca ProdID=3004 Rev=00.01
> S: Manufacturer=Atheros Communications
> S: Product=Bluetooth USB Host Controller
> S: SerialNumber=Alaska Day 2006
> C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>
> This resolves https://bugzilla.redhat.com/show_bug.cgi?id=844750
>
> Reported-by: [email protected]
> Signed-off-by: Josh Boyer <[email protected]>
> ---
> drivers/bluetooth/ath3k.c | 2 ++
> drivers/bluetooth/btusb.c | 1 +
> 2 files changed, 3 insertions(+)

Patch has been applied to bluetooth.git. Thanks.

Gustavo

2013-03-08 17:14:12

by Shuah Khan

Subject: Re: [PATCH] bluetooth: Add support for atheros 04ca:3004 device to ath3k

On Wed, Feb 20, 2013 at 10:31 AM, Gustavo Padovan <[email protected]> wrote:
> Hi Josh,
>
> * Josh Boyer <[email protected]> [2013-02-19 11:54:16 -0500]:
>
>> Yet another version of the atheros bluetooth chipset
>>
>> T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
>> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>> P: Vendor=04ca ProdID=3004 Rev=00.01
>> S: Manufacturer=Atheros Communications
>> S: Product=Bluetooth USB Host Controller
>> S: SerialNumber=Alaska Day 2006
>> C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
>> I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>>
>> This resolves https://bugzilla.redhat.com/show_bug.cgi?id=844750
>>
>> Reported-by: [email protected]
>> Signed-off-by: Josh Boyer <[email protected]>
>> ---
>> drivers/bluetooth/ath3k.c | 2 ++
>> drivers/bluetooth/btusb.c | 1 +
>> 2 files changed, 3 insertions(+)
>
> Patch has been applied to bluetooth.git. Thanks.
>
> Gustavo

Gustavo,

I don't see this in Linus's git? Do you plan to get this into 3.9? Do
you consider this a candidate for stable releases?

thanks,
-- Shuah