From: Tedd Ho-Jeong An <[email protected]>
The format of Intel Bluetooth firmware filename for bootloader product
is ibt-<hw_variant>-<device_revision_id>.sfi
Currently the driver uses a constant value 11 (0x0b) for hw_variant
to support LnP/SfP product. But new product like WsP product has
a different value such as 12 (0x0c).
To support the multiple products, this patch replaces the constant
value of hw_variant to the actual hw_variant value read from
the device.
Signed-off-by: Tedd Ho-Jeong An <[email protected]>
---
drivers/bluetooth/btusb.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a26278b..a402b7e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2104,10 +2104,14 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
/* With this Intel bootloader only the hardware variant and device
* revision information are used to select the right firmware.
*
- * Currently this bootloader support is limited to hardware variant
- * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
+ * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
+ *
+ * Currently the supported hardware variants are:
+ * 11 (0x0b) for iBT3.0(LnP/SfP)
+ * 12 (0x0c) for iBT3.5(WsP)
*/
- snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi",
+ snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
+ le16_to_cpu(ver.hw_variant),
le16_to_cpu(params->dev_revid));
err = request_firmware(&fw, fwname, &hdev->dev);
@@ -2123,7 +2127,8 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
/* Save the DDC file name for later use to apply once the firmware
* downloading is done.
*/
- snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.ddc",
+ snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.ddc",
+ le16_to_cpu(ver.hw_variant),
le16_to_cpu(params->dev_revid));
kfree_skb(skb);
--
2.4.11
Hi Tedd,
> The format of Intel Bluetooth firmware filename for bootloader product
> is ibt-<hw_variant>-<device_revision_id>.sfi
>
> Currently the driver uses a constant value 11 (0x0b) for hw_variant
> to support LnP/SfP product. But new product like WsP product has
> a different value such as 12 (0x0c).
>
> To support the multiple products, this patch replaces the constant
> value of hw_variant to the actual hw_variant value read from
> the device.
>
> Signed-off-by: Tedd Ho-Jeong An <[email protected]>
> ---
> drivers/bluetooth/btusb.c | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel