On mips and parisc:
drivers/bluetooth/btwilink.c: In function 'ti_st_open':
drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow]
hst->reg_status = -EINPROGRESS;
drivers/nfc/nfcwilink.c: In function 'nfcwilink_open':
drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow]
drv->st_register_cb_status = -EINPROGRESS;
There are actually two issues:
1. Whether "char" is signed or unsigned depends on the architecture.
As the completion callback data is used to pass a (negative) error
code, it should always be signed.
2. EINPROGRESS is 150 on mips, 245 on parisc.
Hence -EINPROGRESS doesn't fit in a signed 8-bit number.
Change the callback status from "char" to "int" to fix these.
Signed-off-by: Geert Uytterhoeven <[email protected]>
---
Compile-tested only.
---
drivers/bluetooth/btwilink.c | 4 ++--
drivers/media/radio/wl128x/fmdrv_common.c | 2 +-
drivers/misc/ti-st/st_core.c | 2 +-
drivers/nfc/nfcwilink.c | 4 ++--
include/linux/ti_wilink_st.h | 2 +-
5 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c
index 24a652f9252be899..485281b3f1677678 100644
--- a/drivers/bluetooth/btwilink.c
+++ b/drivers/bluetooth/btwilink.c
@@ -51,7 +51,7 @@
*/
struct ti_st {
struct hci_dev *hdev;
- char reg_status;
+ int reg_status;
long (*st_write) (struct sk_buff *);
struct completion wait_reg_completion;
};
@@ -83,7 +83,7 @@ static inline void ti_st_tx_complete(struct ti_st *hst, int pkt_type)
* status.ti_st_open() function will wait for signal from this
* API when st_register() function returns ST_PENDING.
*/
-static void st_reg_completion_cb(void *priv_data, char data)
+static void st_reg_completion_cb(void *priv_data, int data)
{
struct ti_st *lhst = priv_data;
diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c
index 3f9e6df7d837ac27..642b89c66bcb99eb 100644
--- a/drivers/media/radio/wl128x/fmdrv_common.c
+++ b/drivers/media/radio/wl128x/fmdrv_common.c
@@ -1472,7 +1472,7 @@ static long fm_st_receive(void *arg, struct sk_buff *skb)
* Called by ST layer to indicate protocol registration completion
* status.
*/
-static void fm_st_reg_comp_cb(void *arg, char data)
+static void fm_st_reg_comp_cb(void *arg, int data)
{
struct fmdev *fmdev;
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index dcdbd58672ccc6d2..00051590e00f9647 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -141,7 +141,7 @@ static void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
* This function is being called with spin lock held, protocol drivers are
* only expected to complete their waits and do nothing more than that.
*/
-static void st_reg_complete(struct st_data_s *st_gdata, char err)
+static void st_reg_complete(struct st_data_s *st_gdata, int err)
{
unsigned char i = 0;
pr_info(" %s ", __func__);
diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c
index f81e500e765061fd..3fbd18b8e473f696 100644
--- a/drivers/nfc/nfcwilink.c
+++ b/drivers/nfc/nfcwilink.c
@@ -94,7 +94,7 @@ struct nfcwilink {
struct nci_dev *ndev;
unsigned long flags;
- char st_register_cb_status;
+ int st_register_cb_status;
long (*st_write) (struct sk_buff *);
struct completion completed;
@@ -320,7 +320,7 @@ exit:
}
/* Called by ST when registration is complete */
-static void nfcwilink_register_complete(void *priv_data, char data)
+static void nfcwilink_register_complete(void *priv_data, int data)
{
struct nfcwilink *drv = priv_data;
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index 0a0d56834c8eb412..f2293028ab9d65e6 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -71,7 +71,7 @@ struct st_proto_s {
enum proto_type type;
long (*recv) (void *, struct sk_buff *);
unsigned char (*match_packet) (const unsigned char *data);
- void (*reg_complete_cb) (void *, char data);
+ void (*reg_complete_cb) (void *, int data);
long (*write) (struct sk_buff *skb);
void *priv_data;
--
1.9.1
Hi Geert,
> On mips and parisc:
>
> drivers/bluetooth/btwilink.c: In function 'ti_st_open':
> drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow]
> hst->reg_status = -EINPROGRESS;
>
> drivers/nfc/nfcwilink.c: In function 'nfcwilink_open':
> drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow]
> drv->st_register_cb_status = -EINPROGRESS;
>
> There are actually two issues:
> 1. Whether "char" is signed or unsigned depends on the architecture.
> As the completion callback data is used to pass a (negative) error
> code, it should always be signed.
> 2. EINPROGRESS is 150 on mips, 245 on parisc.
> Hence -EINPROGRESS doesn't fit in a signed 8-bit number.
>
> Change the callback status from "char" to "int" to fix these.
>
> Signed-off-by: Geert Uytterhoeven <[email protected]>
> ---
> Compile-tested only.
> ---
> drivers/bluetooth/btwilink.c | 4 ++--
> drivers/media/radio/wl128x/fmdrv_common.c | 2 +-
> drivers/misc/ti-st/st_core.c | 2 +-
> drivers/nfc/nfcwilink.c | 4 ++--
> include/linux/ti_wilink_st.h | 2 +-
> 5 files changed, 7 insertions(+), 7 deletions(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel
Hi Marcel,
On Wed, Jul 13, 2016 at 11:56:02AM +0100, Marcel Holtmann wrote:
> Hi Mauro,
>
> >> On mips and parisc:
> >>
> >> drivers/bluetooth/btwilink.c: In function 'ti_st_open':
> >> drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow]
> >> hst->reg_status = -EINPROGRESS;
> >>
> >> drivers/nfc/nfcwilink.c: In function 'nfcwilink_open':
> >> drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow]
> >> drv->st_register_cb_status = -EINPROGRESS;
> >>
> >> There are actually two issues:
> >> 1. Whether "char" is signed or unsigned depends on the architecture.
> >> As the completion callback data is used to pass a (negative) error
> >> code, it should always be signed.
> >> 2. EINPROGRESS is 150 on mips, 245 on parisc.
> >> Hence -EINPROGRESS doesn't fit in a signed 8-bit number.
> >>
> >> Change the callback status from "char" to "int" to fix these.
> >>
> >> Signed-off-by: Geert Uytterhoeven <[email protected]>
> >
> > Patch looks sane to me, but who will apply it?
> >
> > Anyway:
> >
> > Acked-by: Mauro Carvalho Chehab <[email protected]>
>
> I can take it through bluetooth-next if there is no objection.
>
> Samuel, are you fine with that?
Yes, please go ahead.
Cheers,
Samuel.
Hi Mauro,
>> On mips and parisc:
>>
>> drivers/bluetooth/btwilink.c: In function 'ti_st_open':
>> drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow]
>> hst->reg_status = -EINPROGRESS;
>>
>> drivers/nfc/nfcwilink.c: In function 'nfcwilink_open':
>> drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow]
>> drv->st_register_cb_status = -EINPROGRESS;
>>
>> There are actually two issues:
>> 1. Whether "char" is signed or unsigned depends on the architecture.
>> As the completion callback data is used to pass a (negative) error
>> code, it should always be signed.
>> 2. EINPROGRESS is 150 on mips, 245 on parisc.
>> Hence -EINPROGRESS doesn't fit in a signed 8-bit number.
>>
>> Change the callback status from "char" to "int" to fix these.
>>
>> Signed-off-by: Geert Uytterhoeven <[email protected]>
>
> Patch looks sane to me, but who will apply it?
>
> Anyway:
>
> Acked-by: Mauro Carvalho Chehab <[email protected]>
I can take it through bluetooth-next if there is no objection.
Samuel, are you fine with that?
Regards
Marcel
Em Mon, 6 Jun 2016 11:02:03 +0200
Geert Uytterhoeven <[email protected]> escreveu:
> On mips and parisc:
>
> drivers/bluetooth/btwilink.c: In function 'ti_st_open':
> drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow]
> hst->reg_status = -EINPROGRESS;
>
> drivers/nfc/nfcwilink.c: In function 'nfcwilink_open':
> drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow]
> drv->st_register_cb_status = -EINPROGRESS;
>
> There are actually two issues:
> 1. Whether "char" is signed or unsigned depends on the architecture.
> As the completion callback data is used to pass a (negative) error
> code, it should always be signed.
> 2. EINPROGRESS is 150 on mips, 245 on parisc.
> Hence -EINPROGRESS doesn't fit in a signed 8-bit number.
>
> Change the callback status from "char" to "int" to fix these.
>
> Signed-off-by: Geert Uytterhoeven <[email protected]>
Patch looks sane to me, but who will apply it?
Anyway:
Acked-by: Mauro Carvalho Chehab <[email protected]>
> ---
> Compile-tested only.
> ---
> drivers/bluetooth/btwilink.c | 4 ++--
> drivers/media/radio/wl128x/fmdrv_common.c | 2 +-
> drivers/misc/ti-st/st_core.c | 2 +-
> drivers/nfc/nfcwilink.c | 4 ++--
> include/linux/ti_wilink_st.h | 2 +-
> 5 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c
> index 24a652f9252be899..485281b3f1677678 100644
> --- a/drivers/bluetooth/btwilink.c
> +++ b/drivers/bluetooth/btwilink.c
> @@ -51,7 +51,7 @@
> */
> struct ti_st {
> struct hci_dev *hdev;
> - char reg_status;
> + int reg_status;
> long (*st_write) (struct sk_buff *);
> struct completion wait_reg_completion;
> };
> @@ -83,7 +83,7 @@ static inline void ti_st_tx_complete(struct ti_st *hst, int pkt_type)
> * status.ti_st_open() function will wait for signal from this
> * API when st_register() function returns ST_PENDING.
> */
> -static void st_reg_completion_cb(void *priv_data, char data)
> +static void st_reg_completion_cb(void *priv_data, int data)
> {
> struct ti_st *lhst = priv_data;
>
> diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c
> index 3f9e6df7d837ac27..642b89c66bcb99eb 100644
> --- a/drivers/media/radio/wl128x/fmdrv_common.c
> +++ b/drivers/media/radio/wl128x/fmdrv_common.c
> @@ -1472,7 +1472,7 @@ static long fm_st_receive(void *arg, struct sk_buff *skb)
> * Called by ST layer to indicate protocol registration completion
> * status.
> */
> -static void fm_st_reg_comp_cb(void *arg, char data)
> +static void fm_st_reg_comp_cb(void *arg, int data)
> {
> struct fmdev *fmdev;
>
> diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
> index dcdbd58672ccc6d2..00051590e00f9647 100644
> --- a/drivers/misc/ti-st/st_core.c
> +++ b/drivers/misc/ti-st/st_core.c
> @@ -141,7 +141,7 @@ static void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
> * This function is being called with spin lock held, protocol drivers are
> * only expected to complete their waits and do nothing more than that.
> */
> -static void st_reg_complete(struct st_data_s *st_gdata, char err)
> +static void st_reg_complete(struct st_data_s *st_gdata, int err)
> {
> unsigned char i = 0;
> pr_info(" %s ", __func__);
> diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c
> index f81e500e765061fd..3fbd18b8e473f696 100644
> --- a/drivers/nfc/nfcwilink.c
> +++ b/drivers/nfc/nfcwilink.c
> @@ -94,7 +94,7 @@ struct nfcwilink {
> struct nci_dev *ndev;
> unsigned long flags;
>
> - char st_register_cb_status;
> + int st_register_cb_status;
> long (*st_write) (struct sk_buff *);
>
> struct completion completed;
> @@ -320,7 +320,7 @@ exit:
> }
>
> /* Called by ST when registration is complete */
> -static void nfcwilink_register_complete(void *priv_data, char data)
> +static void nfcwilink_register_complete(void *priv_data, int data)
> {
> struct nfcwilink *drv = priv_data;
>
> diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
> index 0a0d56834c8eb412..f2293028ab9d65e6 100644
> --- a/include/linux/ti_wilink_st.h
> +++ b/include/linux/ti_wilink_st.h
> @@ -71,7 +71,7 @@ struct st_proto_s {
> enum proto_type type;
> long (*recv) (void *, struct sk_buff *);
> unsigned char (*match_packet) (const unsigned char *data);
> - void (*reg_complete_cb) (void *, char data);
> + void (*reg_complete_cb) (void *, int data);
> long (*write) (struct sk_buff *skb);
> void *priv_data;
>
--
Thanks,
Mauro