For RTL8723BS devices the current config file name is a composite of
both the config name (rtl8723bs) and a postfix of the device-id.
Given the majority of RTL8723BS devices use a device-id of OBDA8723
this simplifies the config file name to use "rtl8723bs_config.bin"
as a default of for these devices.
Signed-off-by: Ian W MORRISON <[email protected]>
---
drivers/bluetooth/hci_h5.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 8eede1197cd2..cce422dc1b8d 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -852,7 +852,9 @@ static int h5_btrtl_setup(struct h5 *h5)
bool flow_control;
int err;
- btrtl_dev = btrtl_initialize(h5->hu->hdev, h5->id);
+ btrtl_dev = strcmp("OBDA8723", h5->id) ?
+ btrtl_initialize(h5->hu->hdev, h5->id) :
+ btrtl_initialize(h5->hu->hdev, NULL);
if (IS_ERR(btrtl_dev))
return PTR_ERR(btrtl_dev);
--
2.17.1
Hi,
On 14-08-18 08:47, Ian W MORRISON wrote:
> For RTL8723BS devices the current config file name is a composite of
> both the config name (rtl8723bs) and a postfix of the device-id.
>
> Given the majority of RTL8723BS devices use a device-id of OBDA8723
> this simplifies the config file name to use "rtl8723bs_config.bin"
> as a default of for these devices.
NACK, the device id is in there for a reason, once someone writes
support for it we will also need a rtl8723bs_config file on ARM
boards, which will definitely be board specific. I don't want us
to pretend there is one config to rule them all.
Specifically I plan to submit both the firmware and
rtl8723bs_config-OBDA8723.bin to linux-firmware soon, if the kernel
instead looks for just rtl8723bs_config.bin then I need to give
it that name in linux-firmware and then when we get ARM support
and the kernel complains about e.g. rtl8723bs_config-NextThingCo-CHIP.bin
not being there people may be tempted to think they can just link
to the "generic" one from linux-firmware which then turns out
to not be generic at all.
Regards,
Hans
>
> Signed-off-by: Ian W MORRISON <[email protected]>
> ---
> drivers/bluetooth/hci_h5.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
> index 8eede1197cd2..cce422dc1b8d 100644
> --- a/drivers/bluetooth/hci_h5.c
> +++ b/drivers/bluetooth/hci_h5.c
> @@ -852,7 +852,9 @@ static int h5_btrtl_setup(struct h5 *h5)
> bool flow_control;
> int err;
>
> - btrtl_dev = btrtl_initialize(h5->hu->hdev, h5->id);
> + btrtl_dev = strcmp("OBDA8723", h5->id) ?
> + btrtl_initialize(h5->hu->hdev, h5->id) :
> + btrtl_initialize(h5->hu->hdev, NULL);
> if (IS_ERR(btrtl_dev))
> return PTR_ERR(btrtl_dev);
>
>
Hi Ian,
> For RTL8723BS devices the current config file name is a composite of
> both the config name (rtl8723bs) and a postfix of the device-id.
>
> Given the majority of RTL8723BS devices use a device-id of OBDA8723
> this simplifies the config file name to use "rtl8723bs_config.bin"
> as a default of for these devices.
>
> Signed-off-by: Ian W MORRISON <[email protected]>
> ---
> drivers/bluetooth/hci_h5.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
> index 8eede1197cd2..cce422dc1b8d 100644
> --- a/drivers/bluetooth/hci_h5.c
> +++ b/drivers/bluetooth/hci_h5.c
> @@ -852,7 +852,9 @@ static int h5_btrtl_setup(struct h5 *h5)
> bool flow_control;
> int err;
>
> - btrtl_dev = btrtl_initialize(h5->hu->hdev, h5->id);
> + btrtl_dev = strcmp("OBDA8723", h5->id) ?
> + btrtl_initialize(h5->hu->hdev, h5->id) :
> + btrtl_initialize(h5->hu->hdev, NULL);
I am not letting you duplicate the PNPID here. This needs to be done cleanly with the device table that is already present.
Regards
Marcel