Hi Dave,
Here's the main bluetooth-next pull request for the 5.7 kernel.
- Added wideband speech support to mgmt and the ability for HCI drivers
to declare support for it.
- Added initial support for L2CAP Enhanced Credit Based Mode
- Fixed suspend handling for several use cases
- Fixed Extended Advertising related issues
- Added support for Realtek 8822CE device
- Added DT bindings for QTI chip WCN3991
- Cleanups to replace zero-length arrays with flexible-array members
- Several other smaller cleanups & fixes
Please let me know if there are any issues pulling. Thanks.
Johan
---
The following changes since commit 8e5aa6173ad3ef794e52afa2bb56451db18642b9:
Merge branch 'qed-Utilize-FW-8.42.2.0' (2020-01-27 14:35:40 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git for-upstream
for you to fetch changes up to ba7c1b47c11ba78e54f979aae9df1149815c23ad:
Bluetooth: Do not cancel advertising when starting a scan (2020-03-18 12:25:03 +0100)
----------------------------------------------------------------
Abhishek Pandit-Subedi (4):
Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND
Bluetooth: Handle BR/EDR devices during suspend
Bluetooth: Handle LE devices during suspend
Bluetooth: Pause discovery and advertising during suspend
Alain Michaud (6):
Bluetooth: Fixing a few comment typos in the quirk definitions.
Bluetooth: btusb: Add flag to define wideband speech capability
Bluetooth: Support querying for WBS support through MGMT
Bluetooth: guard against controllers sending zero'd events
Bluetooth: Enable erroneous data reporting if WBS is supported
Bluetooth: fix off by one in err_data_reporting cmd masks.
Alex Shi (1):
Bluetooth: remove __get_channel/dir and __dir
Christophe JAILLET (4):
Bluetooth: SMP: Fix SALT value in some comments
Bluetooth: Fix a typo in Kconfig
Bluetooth: hci_h4: Fix a typo in a comment
Bluetooth: hci_h4: Remove a redundant assignment in 'h4_flush()'
Dan Carpenter (1):
Bluetooth: L2CAP: Fix a condition in l2cap_sock_recvmsg()
Davidlohr Bueso (1):
Bluetooth: optimize barrier usage for Rmw atomics
Dmitry Grinberg (1):
Bluetooth: Do not cancel advertising when starting a scan
Gustavo A. R. Silva (5):
Bluetooth: btintel: Replace zero-length array with flexible-array member
Bluetooth: hci_intel: Replace zero-length array with flexible-array member
Bluetooth: hci_uart: Replace zero-length array with flexible-array member
Bluetooth: Replace zero-length array with flexible-array member
6lowpan: Replace zero-length array with flexible-array member
Hillf Danton (1):
Bluetooth: prefetch channel before killing sock
Howard Chung (3):
Bluetooth: secure bluetooth stack from bluedump attack
Bluetooth: fix passkey uninitialized when used
Bluetooth: L2CAP: handle l2cap config request during open state
Joseph Hwang (2):
Bluetooth: mgmt: add mgmt_cmd_status in add_advertising
Bluetooth: clean up connection in hci_cs_disconnect
Luiz Augusto von Dentz (7):
Bluetooth: Add BT_PHY socket option
Bluetooth: Fix crash when using new BT_PHY option
Bluetooth: RFCOMM: Use MTU auto tune logic
Bluetooth: Make use of skb_pull to parse L2CAP signaling PDUs
Bluetooth: L2CAP: Add definitions for Enhanced Credit Based Mode
Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode
Bluetooth: L2CAP: Add module option to enable ECRED mode
Lukas Bulwahn (1):
MAINTAINERS: adjust to 6lowpan doc ReST conversion
Madhuparna Bhowmik (2):
Bluetooth: Fix Suspicious RCU usage warnings
Bluetooth: Use list_for_each_entry_rcu() to traverse RCU list in RCU read-side CS
Manish Mandlik (1):
Bluetooth: Fix refcount use-after-free issue
Marcel Holtmann (6):
Bluetooth: hci_h5: Move variable into local scope
Bluetooth: Fix calculation of SCO handle for packet processing
Bluetooth: Increment management interface revision
Bluetooth: bfusb: Switch from BT_ERR to bt_dev_err where possible
Bluetooth: Use bt_dev_err for RPA generation failure message
Bluetooth: hci_h5: Switch from BT_ERR to bt_dev_err where possible
Mauro Carvalho Chehab (1):
docs: networking: convert 6lowpan.txt to ReST
Max Chou (1):
Bluetooth: hci_h5: btrtl: Add support for RTL8822C
Qiujun Huang (1):
Bluetooth: RFCOMM: fix ODEBUG bug in rfcomm_dev_ioctl
Rocky Liao (4):
Bluetooth: hci_qca: Not send vendor pre-shutdown command for QCA Rome
Bluetooth: btqca: Fix the NVM baudrate tag offcet for wcn3991
Bluetooth: hci_qca: Make bt_en and susclk not mandatory for QCA Rome
Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional()
Sathish Narsimman (3):
Bluetooth: Disable Extended Adv if enabled
Bluetooth: Remove adv set for directed advertising
Bluetooth: During le_conn_timeout disable EXT_ADV
Sergey Shatunov (1):
Bluetooth: btusb: Add support for 13d3:3548 Realtek 8822CE device
Sukumar Ghorai (1):
Bluetooth: btusb: print Intel fw build version in power-on boot
Venkata Lakshmi Narayana Gubba (4):
Bluetooth: hci_qca: Enable clocks required for BT SOC
dt-bindings: net: bluetooth: Add device tree bindings for QTI chip WCN3991
Bluetooth: hci_qca: Optimized code while enabling clocks for BT SOC
Bluetooth: hci_qca: Bug fixes while collecting controller memory dump
YueHaibing (1):
Bluetooth: L2CAP: remove set but not used variable 'credits'
.../devicetree/bindings/net/qualcomm-bluetooth.txt | 3 +
.../networking/{6lowpan.txt => 6lowpan.rst} | 29 +-
Documentation/networking/index.rst | 1 +
MAINTAINERS | 2 +-
drivers/bluetooth/Kconfig | 4 +-
drivers/bluetooth/bfusb.c | 33 +-
drivers/bluetooth/btintel.c | 4 +-
drivers/bluetooth/btqca.c | 10 +-
drivers/bluetooth/btqca.h | 6 +-
drivers/bluetooth/btrtl.c | 12 +
drivers/bluetooth/btrtl.h | 4 +-
drivers/bluetooth/btusb.c | 32 +-
drivers/bluetooth/hci_ag6xx.c | 2 +-
drivers/bluetooth/hci_h4.c | 4 +-
drivers/bluetooth/hci_h5.c | 49 +-
drivers/bluetooth/hci_intel.c | 2 +-
drivers/bluetooth/hci_qca.c | 174 ++++--
include/net/6lowpan.h | 2 +-
include/net/bluetooth/bluetooth.h | 17 +
include/net/bluetooth/hci.h | 74 ++-
include/net/bluetooth/hci_core.h | 46 ++
include/net/bluetooth/hci_sock.h | 6 +-
include/net/bluetooth/l2cap.h | 52 +-
include/net/bluetooth/mgmt.h | 5 +-
include/net/bluetooth/rfcomm.h | 3 +-
net/bluetooth/a2mp.h | 10 +-
net/bluetooth/bnep/bnep.h | 6 +-
net/bluetooth/hci_conn.c | 146 ++++-
net/bluetooth/hci_core.c | 142 ++++-
net/bluetooth/hci_event.c | 93 +++-
net/bluetooth/hci_request.c | 350 +++++++++---
net/bluetooth/hci_request.h | 2 +
net/bluetooth/hidp/core.c | 2 +-
net/bluetooth/l2cap_core.c | 617 +++++++++++++++++++--
net/bluetooth/l2cap_sock.c | 59 +-
net/bluetooth/mgmt.c | 113 +++-
net/bluetooth/rfcomm/core.c | 13 +-
net/bluetooth/rfcomm/tty.c | 4 +-
net/bluetooth/sco.c | 13 +
net/bluetooth/smp.c | 29 +-
40 files changed, 1846 insertions(+), 329 deletions(-)
rename Documentation/networking/{6lowpan.txt => 6lowpan.rst} (64%)
From: Johan Hedberg <[email protected]>
Date: Thu, 19 Mar 2020 21:28:41 +0200
> Here's the main bluetooth-next pull request for the 5.7 kernel.
>
> - Added wideband speech support to mgmt and the ability for HCI drivers
> to declare support for it.
> - Added initial support for L2CAP Enhanced Credit Based Mode
> - Fixed suspend handling for several use cases
> - Fixed Extended Advertising related issues
> - Added support for Realtek 8822CE device
> - Added DT bindings for QTI chip WCN3991
> - Cleanups to replace zero-length arrays with flexible-array members
> - Several other smaller cleanups & fixes
>
> Please let me know if there are any issues pulling. Thanks.
Pulled, thanks Johan.