It is preferable to allow suspend even when Bluetooth has problems
preparing for sleep. When Bluetooth fails to finish preparing for
suspend, log the error and allow the suspend notifier to continue
instead.
To also make it clearer why suspend failed, change bt_dev_dbg to
bt_dev_err when handling the suspend timeout.
Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
---
To verify this is properly working, I added an additional change to
hci_suspend_wait_event to always return -16. This validates that suspend
continues even when an error has occurred during the suspend
preparation.
Example on Chromebook:
[ 55.834524] PM: Syncing filesystems ... done.
[ 55.841930] PM: Preparing system for sleep (s2idle)
[ 55.940492] Bluetooth: hci_core.c:hci_suspend_notifier() hci0: Suspend notifier action (3) failed: -16
[ 55.940497] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 55.941692] OOM killer disabled.
[ 55.941693] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 55.942632] PM: Suspending system (s2idle)
I ran this through a suspend_stress_test in the following scenarios:
* Peer classic device connected: 50+ suspends
* No devices connected: 100 suspends
* With the above test case returning -EBUSY: 50 suspends
I also ran this through our automated testing for suspend and wake on
BT from suspend continues to work.
net/bluetooth/hci_core.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index dbe2d79f233fba..54da48441423e0 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3289,10 +3289,10 @@ static int hci_suspend_wait_event(struct hci_dev *hdev)
WAKE_COND, SUSPEND_NOTIFIER_TIMEOUT);
if (ret == 0) {
- bt_dev_dbg(hdev, "Timed out waiting for suspend");
+ bt_dev_err(hdev, "Timed out waiting for suspend events");
for (i = 0; i < __SUSPEND_NUM_TASKS; ++i) {
if (test_bit(i, hdev->suspend_tasks))
- bt_dev_dbg(hdev, "Bit %d is set", i);
+ bt_dev_err(hdev, "Suspend timeout bit: %d", i);
clear_bit(i, hdev->suspend_tasks);
}
@@ -3360,12 +3360,15 @@ static int hci_suspend_notifier(struct notifier_block *nb, unsigned long action,
ret = hci_change_suspend_state(hdev, BT_RUNNING);
}
- /* If suspend failed, restore it to running */
- if (ret && action == PM_SUSPEND_PREPARE)
- hci_change_suspend_state(hdev, BT_RUNNING);
-
done:
- return ret ? notifier_from_errno(-EBUSY) : NOTIFY_STOP;
+ /* We always allow suspend even if suspend preparation failed and
+ * attempt to recover in resume.
+ */
+ if (ret)
+ bt_dev_err(hdev, "Suspend notifier action (%x) failed: %d",
+ action, ret);
+
+ return NOTIFY_STOP;
}
/* Alloc HCI device */
--
2.27.0.rc2.251.g90737beb825-goog
On Wed, Jun 3, 2020 at 10:22 PM Abhishek Pandit-Subedi
<[email protected]> wrote:
>
> It is preferable to allow suspend even when Bluetooth has problems
> preparing for sleep. When Bluetooth fails to finish preparing for
> suspend, log the error and allow the suspend notifier to continue
> instead.
>
> To also make it clearer why suspend failed, change bt_dev_dbg to
> bt_dev_err when handling the suspend timeout.
>
> Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
Thanks for the patch, it looks reasonable to me.
It would be good to add a Fixes tag to it to indicate that it works
around an issue introduced by an earlier commit.
Len, Todd, would it be possible to test this one on the affected machines?
> ---
> To verify this is properly working, I added an additional change to
> hci_suspend_wait_event to always return -16. This validates that suspend
> continues even when an error has occurred during the suspend
> preparation.
>
> Example on Chromebook:
> [ 55.834524] PM: Syncing filesystems ... done.
> [ 55.841930] PM: Preparing system for sleep (s2idle)
> [ 55.940492] Bluetooth: hci_core.c:hci_suspend_notifier() hci0: Suspend notifier action (3) failed: -16
> [ 55.940497] Freezing user space processes ... (elapsed 0.001 seconds) done.
> [ 55.941692] OOM killer disabled.
> [ 55.941693] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
> [ 55.942632] PM: Suspending system (s2idle)
>
> I ran this through a suspend_stress_test in the following scenarios:
> * Peer classic device connected: 50+ suspends
> * No devices connected: 100 suspends
> * With the above test case returning -EBUSY: 50 suspends
>
> I also ran this through our automated testing for suspend and wake on
> BT from suspend continues to work.
>
>
> net/bluetooth/hci_core.c | 17 ++++++++++-------
> 1 file changed, 10 insertions(+), 7 deletions(-)
>
> diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
> index dbe2d79f233fba..54da48441423e0 100644
> --- a/net/bluetooth/hci_core.c
> +++ b/net/bluetooth/hci_core.c
> @@ -3289,10 +3289,10 @@ static int hci_suspend_wait_event(struct hci_dev *hdev)
> WAKE_COND, SUSPEND_NOTIFIER_TIMEOUT);
>
> if (ret == 0) {
> - bt_dev_dbg(hdev, "Timed out waiting for suspend");
> + bt_dev_err(hdev, "Timed out waiting for suspend events");
> for (i = 0; i < __SUSPEND_NUM_TASKS; ++i) {
> if (test_bit(i, hdev->suspend_tasks))
> - bt_dev_dbg(hdev, "Bit %d is set", i);
> + bt_dev_err(hdev, "Suspend timeout bit: %d", i);
> clear_bit(i, hdev->suspend_tasks);
> }
>
> @@ -3360,12 +3360,15 @@ static int hci_suspend_notifier(struct notifier_block *nb, unsigned long action,
> ret = hci_change_suspend_state(hdev, BT_RUNNING);
> }
>
> - /* If suspend failed, restore it to running */
> - if (ret && action == PM_SUSPEND_PREPARE)
> - hci_change_suspend_state(hdev, BT_RUNNING);
> -
> done:
> - return ret ? notifier_from_errno(-EBUSY) : NOTIFY_STOP;
> + /* We always allow suspend even if suspend preparation failed and
> + * attempt to recover in resume.
> + */
> + if (ret)
> + bt_dev_err(hdev, "Suspend notifier action (%x) failed: %d",
> + action, ret);
> +
> + return NOTIFY_STOP;
> }
>
> /* Alloc HCI device */
> --
> 2.27.0.rc2.251.g90737beb825-goog
>
Sent a v2 with proper fixes and reported-by tags.
Thanks
Abhishek
On Thu, Jun 4, 2020 at 3:46 AM Rafael J. Wysocki <[email protected]> wrote:
>
> On Wed, Jun 3, 2020 at 10:22 PM Abhishek Pandit-Subedi
> <[email protected]> wrote:
> >
> > It is preferable to allow suspend even when Bluetooth has problems
> > preparing for sleep. When Bluetooth fails to finish preparing for
> > suspend, log the error and allow the suspend notifier to continue
> > instead.
> >
> > To also make it clearer why suspend failed, change bt_dev_dbg to
> > bt_dev_err when handling the suspend timeout.
> >
> > Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
>
> Thanks for the patch, it looks reasonable to me.
>
> It would be good to add a Fixes tag to it to indicate that it works
> around an issue introduced by an earlier commit.
>
> Len, Todd, would it be possible to test this one on the affected machines?
>
> > ---
> > To verify this is properly working, I added an additional change to
> > hci_suspend_wait_event to always return -16. This validates that suspend
> > continues even when an error has occurred during the suspend
> > preparation.
> >
> > Example on Chromebook:
> > [ 55.834524] PM: Syncing filesystems ... done.
> > [ 55.841930] PM: Preparing system for sleep (s2idle)
> > [ 55.940492] Bluetooth: hci_core.c:hci_suspend_notifier() hci0: Suspend notifier action (3) failed: -16
> > [ 55.940497] Freezing user space processes ... (elapsed 0.001 seconds) done.
> > [ 55.941692] OOM killer disabled.
> > [ 55.941693] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
> > [ 55.942632] PM: Suspending system (s2idle)
> >
> > I ran this through a suspend_stress_test in the following scenarios:
> > * Peer classic device connected: 50+ suspends
> > * No devices connected: 100 suspends
> > * With the above test case returning -EBUSY: 50 suspends
> >
> > I also ran this through our automated testing for suspend and wake on
> > BT from suspend continues to work.
> >
> >
> > net/bluetooth/hci_core.c | 17 ++++++++++-------
> > 1 file changed, 10 insertions(+), 7 deletions(-)
> >
> > diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
> > index dbe2d79f233fba..54da48441423e0 100644
> > --- a/net/bluetooth/hci_core.c
> > +++ b/net/bluetooth/hci_core.c
> > @@ -3289,10 +3289,10 @@ static int hci_suspend_wait_event(struct hci_dev *hdev)
> > WAKE_COND, SUSPEND_NOTIFIER_TIMEOUT);
> >
> > if (ret == 0) {
> > - bt_dev_dbg(hdev, "Timed out waiting for suspend");
> > + bt_dev_err(hdev, "Timed out waiting for suspend events");
> > for (i = 0; i < __SUSPEND_NUM_TASKS; ++i) {
> > if (test_bit(i, hdev->suspend_tasks))
> > - bt_dev_dbg(hdev, "Bit %d is set", i);
> > + bt_dev_err(hdev, "Suspend timeout bit: %d", i);
> > clear_bit(i, hdev->suspend_tasks);
> > }
> >
> > @@ -3360,12 +3360,15 @@ static int hci_suspend_notifier(struct notifier_block *nb, unsigned long action,
> > ret = hci_change_suspend_state(hdev, BT_RUNNING);
> > }
> >
> > - /* If suspend failed, restore it to running */
> > - if (ret && action == PM_SUSPEND_PREPARE)
> > - hci_change_suspend_state(hdev, BT_RUNNING);
> > -
> > done:
> > - return ret ? notifier_from_errno(-EBUSY) : NOTIFY_STOP;
> > + /* We always allow suspend even if suspend preparation failed and
> > + * attempt to recover in resume.
> > + */
> > + if (ret)
> > + bt_dev_err(hdev, "Suspend notifier action (%x) failed: %d",
> > + action, ret);
> > +
> > + return NOTIFY_STOP;
> > }
> >
> > /* Alloc HCI device */
> > --
> > 2.27.0.rc2.251.g90737beb825-goog
> >