Latest intel firmware supports TLV structure in operational mode for intel
read version. so made changes accordingly to support both bootloader
and operational mode . These changes are only to specific intel bluetooth
controller for example ThP, CcP.
Signed-off-by: Sathish Narasimman <[email protected]>
---
drivers/bluetooth/btintel.c | 105 +++++++++++++++++++++++++++---------
drivers/bluetooth/btintel.h | 16 ++++++
drivers/bluetooth/btusb.c | 41 ++++++++++----
3 files changed, 129 insertions(+), 33 deletions(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 88ce5f0ffc4b..67267afc83e1 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -401,31 +401,9 @@ void btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *ve
}
EXPORT_SYMBOL_GPL(btintel_version_info_tlv);
-int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
+static void btintel_parse_tlv(struct sk_buff *skb,
+ struct intel_version_tlv *version)
{
- struct sk_buff *skb;
- const u8 param[1] = { 0xFF };
-
- if (!version)
- return -EINVAL;
-
- skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
- if (IS_ERR(skb)) {
- bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
- PTR_ERR(skb));
- return PTR_ERR(skb);
- }
-
- if (skb->data[0]) {
- bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
- skb->data[0]);
- kfree_skb(skb);
- return -EIO;
- }
-
- /* Consume Command Complete Status field */
- skb_pull(skb, 1);
-
/* Event parameters contatin multiple TLVs. Read each of them
* and only keep the required data. Also, it use existing legacy
* version field like hw_platform, hw_variant, and fw_variant
@@ -496,6 +474,85 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
/* consume the current tlv and move to next*/
skb_pull(skb, tlv->len + sizeof(*tlv));
}
+}
+
+int btintel_read_version_new(struct hci_dev *hdev, struct btintel_version *ver)
+{
+ struct sk_buff *skb;
+ struct intel_version *version = &ver->ver;
+ const u8 param[1] = { 0xFF };
+
+ skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading Intel version info failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->data[0]) {
+ bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
+ skb->data[0]);
+ kfree_skb(skb);
+ return -EIO;
+ }
+
+ /* The new Intel read version is backward compatible for Thp and CcP
+ * type cards. when the controller is in bootloader mode the controller
+ * response remains same as old intel_read version. For ThP/CcP cards
+ * TLV structure supports only during the Operation Mode. The best way
+ * to differentiate the read_version response is to check the length
+ * parameter and the first byte of the payload, which is a fixed value.
+ * After the status parameter if the payload starts with 0x37(This is
+ * a fixed value) and length of the payload is 10 then it is identified
+ * as legacy struct intel_version. In the latest firmware the support
+ * of TLV structure is added during Operational Firmware.
+ */
+ if (skb->len == sizeof(*version) && skb->data[1] == 0x37) {
+ memcpy(version, skb->data, sizeof(*version));
+ ver->tlv_format = false;
+ goto finish;
+ }
+
+ /* Consume Command Complete Status field */
+ skb_pull(skb, 1);
+
+ ver->tlv_format = true;
+
+ bt_dev_info(hdev, "Parsing TLV Supported intel read version");
+ btintel_parse_tlv(skb, &ver->ver_tlv);
+
+finish:
+ kfree_skb(skb);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_read_version_new);
+
+int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
+{
+ struct sk_buff *skb;
+ const u8 param[1] = { 0xFF };
+
+ if (!version)
+ return -EINVAL;
+
+ skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->data[0]) {
+ bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
+ skb->data[0]);
+ kfree_skb(skb);
+ return -EIO;
+ }
+
+ /* Consume Command Complete Status field */
+ skb_pull(skb, 1);
+
+ btintel_parse_tlv(skb, version);
kfree_skb(skb);
return 0;
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 09346ae308eb..952da44b79de 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -132,6 +132,15 @@ struct intel_debug_features {
__u8 page1[16];
} __packed;
+struct btintel_version {
+ bool tlv_format;
+ union {
+ struct intel_version ver; /*Legacy Intel read version*/
+ struct intel_version_tlv ver_tlv;
+ };
+} __packed;
+
+#define INTEL_HW_VARIANT(cnvx_bt) ((u8)(((cnvx_bt) & 0x003f0000) >> 16))
#if IS_ENABLED(CONFIG_BT_INTEL)
int btintel_check_bdaddr(struct hci_dev *hdev);
@@ -151,6 +160,7 @@ int btintel_set_event_mask(struct hci_dev *hdev, bool debug);
int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug);
int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver);
int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver);
+int btintel_read_version_new(struct hci_dev *hdev, struct btintel_version *ver);
struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
u16 opcode_write);
@@ -248,6 +258,12 @@ static inline int btintel_read_version_tlv(struct hci_dev *hdev,
return -EOPNOTSUPP;
}
+static inline int btintel_read_version_new(struct hci_dev *hdev,
+ struct btintel_version *ver)
+{
+ return -EOPNOTSUPP;
+}
+
static inline struct regmap *btintel_regmap_init(struct hci_dev *hdev,
u16 opcode_read,
u16 opcode_write)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 1005b6e8ff74..c63bc8a0c84f 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2554,7 +2554,8 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
static int btusb_setup_intel_new(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
- struct intel_version ver;
+ struct btintel_version bt_ver;
+ u8 hw_variant;
struct intel_boot_params params;
u32 boot_param;
char ddcname[64];
@@ -2577,19 +2578,33 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* is in bootloader mode or if it already has operational firmware
* loaded.
*/
- err = btintel_read_version(hdev, &ver);
+ err = btintel_read_version_new(hdev, &bt_ver);
if (err) {
bt_dev_err(hdev, "Intel Read version failed (%d)", err);
btintel_reset_to_bootloader(hdev);
return err;
}
- err = btusb_intel_download_firmware(hdev, &ver, ¶ms, &boot_param);
+ /* If TLV format is supported then it is in Operational Firmware. TLV
+ * structure is supported only in operational mode in latest Firmware.
+ */
+ if (bt_ver.tlv_format && bt_ver.ver_tlv.img_type == 0x03) {
+ btintel_version_info_tlv(hdev, &bt_ver.ver_tlv);
+ clear_bit(BTUSB_BOOTLOADER, &data->flags);
+ goto finish;
+ }
+
+ err = btusb_intel_download_firmware(hdev, &bt_ver.ver, ¶ms,
+ &boot_param);
if (err)
return err;
- /* controller is already having an operational firmware */
- if (ver.fw_variant == 0x23)
+ /* In case if old firmware is used, it should be backward compatible
+ * to check for operational firmware. only on latest firmware the
+ * support for TLV structure is added. so check for tlv is not
+ * required here.
+ */
+ if (bt_ver.ver.fw_variant == 0x23)
goto finish;
rettime = ktime_get();
@@ -2641,7 +2656,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
clear_bit(BTUSB_BOOTLOADER, &data->flags);
- err = btusb_setup_intel_new_get_fw_name(&ver, ¶ms, ddcname,
+ err = btusb_setup_intel_new_get_fw_name(&bt_ver.ver, ¶ms, ddcname,
sizeof(ddcname), "ddc");
if (!err) {
@@ -2665,17 +2680,25 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
btintel_set_debug_features(hdev, &features);
/* Read the Intel version information after loading the FW */
- err = btintel_read_version(hdev, &ver);
+ err = btintel_read_version_new(hdev, &bt_ver);
if (err)
return err;
- btintel_version_info(hdev, &ver);
+ if (bt_ver.tlv_format)
+ btintel_version_info_tlv(hdev, &bt_ver.ver_tlv);
+ else
+ btintel_version_info(hdev, &bt_ver.ver);
finish:
/* All Intel controllers that support the Microsoft vendor
* extension are using 0xFC1E for VsMsftOpCode.
*/
- switch (ver.hw_variant) {
+ if (!bt_ver.tlv_format)
+ hw_variant = bt_ver.ver.hw_variant;
+ else
+ hw_variant = INTEL_HW_VARIANT(bt_ver.ver_tlv.cnvi_bt);
+
+ switch (hw_variant) {
case 0x12: /* ThP */
hci_set_msft_opcode(hdev, 0xFC1E);
break;
--
2.17.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=378871
---Test result---
##############################
Test: CheckPatch - PASS
##############################
Test: CheckGitLint - PASS
##############################
Test: CheckBuildK - PASS
---
Regards,
Linux Bluetooth