From: Joakim Tjernlund <[email protected]>
According Realteks own BT drivers firmware RTL8761B is for UART
and RTL8761BU is for USB.
Change existing 8761B to UART and add an 8761BU entry for USB
Signed-off-by: Joakim Tjernlund <[email protected]>
Cc: [email protected]
---
drivers/bluetooth/btrtl.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index e7fe5fb22753..ccef8b2cfee2 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -132,12 +132,19 @@ static const struct id_table ic_id_table[] = {
.cfg_name = "rtl_bt/rtl8761a_config" },
/* 8761B */
- { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
+ { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART),
.config_needed = false,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8761b_fw.bin",
.cfg_name = "rtl_bt/rtl8761b_config" },
+ /* 8761BU */
+ { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
+ .config_needed = false,
+ .has_rom_version = true,
+ .fw_name = "rtl_bt/rtl8761bu_fw.bin",
+ .cfg_name = "rtl_bt/rtl8761bu_config" },
+
/* 8822C with UART interface */
{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART),
.config_needed = true,
--
2.31.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=490347
---Test result---
Test Summary:
CheckPatch PASS 0.90 seconds
GitLint FAIL 0.25 seconds
BuildKernel PASS 555.99 seconds
TestRunner: Setup PASS 358.17 seconds
TestRunner: l2cap-tester PASS 2.76 seconds
TestRunner: bnep-tester PASS 2.07 seconds
TestRunner: mgmt-tester PASS 27.90 seconds
TestRunner: rfcomm-tester PASS 2.18 seconds
TestRunner: sco-tester PASS 2.08 seconds
TestRunner: smp-tester PASS 2.18 seconds
TestRunner: userchan-tester PASS 1.94 seconds
Details
##############################
Test: CheckPatch - PASS - 0.90 seconds
Run checkpatch.pl script with rule in .checkpatch.conf
##############################
Test: GitLint - FAIL - 0.25 seconds
Run gitlint with rule in .gitlint
Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device.
1: T3 Title has trailing punctuation (.): "Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device."
##############################
Test: BuildKernel - PASS - 555.99 seconds
Build Kernel with minimal configuration supports Bluetooth
##############################
Test: TestRunner: Setup - PASS - 358.17 seconds
Setup environment for running Test Runner
##############################
Test: TestRunner: l2cap-tester - PASS - 2.76 seconds
Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: bnep-tester - PASS - 2.07 seconds
Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: mgmt-tester - PASS - 27.90 seconds
Run test-runner with mgmt-tester
Total: 433, Passed: 418 (96.5%), Failed: 0, Not Run: 15
##############################
Test: TestRunner: rfcomm-tester - PASS - 2.18 seconds
Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: sco-tester - PASS - 2.08 seconds
Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: smp-tester - PASS - 2.18 seconds
Run test-runner with smp-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: userchan-tester - PASS - 1.94 seconds
Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
---
Regards,
Linux Bluetooth
Gentle ping ...
On Fri, 2021-05-28 at 18:46 +0200, Joakim Tjernlund wrote:
> From: Joakim Tjernlund <[email protected]>
>
> According Realteks own BT drivers firmware RTL8761B is for UART
> and RTL8761BU is for USB.
>
> Change existing 8761B to UART and add an 8761BU entry for USB
>
> Signed-off-by: Joakim Tjernlund <[email protected]>
> Cc: [email protected]
> ---
> drivers/bluetooth/btrtl.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index e7fe5fb22753..ccef8b2cfee2 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -132,12 +132,19 @@ static const struct id_table ic_id_table[] = {
> .cfg_name = "rtl_bt/rtl8761a_config" },
>
>
> /* 8761B */
> - { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
> + { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART),
> .config_needed = false,
> .has_rom_version = true,
> .fw_name = "rtl_bt/rtl8761b_fw.bin",
> .cfg_name = "rtl_bt/rtl8761b_config" },
>
>
> + /* 8761BU */
> + { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
> + .config_needed = false,
> + .has_rom_version = true,
> + .fw_name = "rtl_bt/rtl8761bu_fw.bin",
> + .cfg_name = "rtl_bt/rtl8761bu_config" },
> +
> /* 8822C with UART interface */
> { IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART),
> .config_needed = true,