To avoid the overhead on both the controller and the host, the
Intel link statistics telemetry events are disabled by default.
Reviewed-by: Miao-chen Chou <[email protected]>
Signed-off-by: Chethan T N <[email protected]>
Signed-off-by: Kiran K <[email protected]>
Signed-off-by: Joseph Hwang <[email protected]>
---
Changes in v4:
- The original 2 patches in Series-version 3 are split into
2 patches from each patch per reviewers' comments. There are
A total of 4 patches in this series now.
- The callback function is renamed from hdev->set_vs_dbg_evt to
hdev->set_quality_report. Note that there are two different
specifications which will be integrated soon and enabled/disabled
with the same callback. One is Android Bluetooth Quality Report
(BQR), and the other Intel link statistics telemetry events here.
While most Bluetooth controller vendors have supported or are
supporting the Android specification in their controllers, it looks
making sense to use set_quality_report as the callback name.
- Similarly, the config option BT_FEATURE_VS_DBG_EVT is renamed as
BT_FEATURE_QUALITY_REPORT which depends on BT now.
- The BQR is controller specific. There needs to be a valid hdev in the
first place. This is fixed in set_exp_feature().
- In set_exp_feature(), bluez will only set experimental feature to set
BQR when the feature is supported. Please refer to bluez CLs.
- Also refer to bluez patches for the decoding support of btmon.
Changes in v3:
- fix the long line in the commit message
Changes in v2:
- take care of intel_newgen as well as intel_new
- fix the long lines in mgmt.c
drivers/bluetooth/btusb.c | 18 ------------------
1 file changed, 18 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a9855a2dd561..4c3b26c5e507 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2850,7 +2850,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
u32 boot_param;
char ddcname[64];
int err;
- struct intel_debug_features features;
BT_DBG("%s", hdev->name);
@@ -2904,14 +2903,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
btintel_load_ddc_config(hdev, ddcname);
}
- /* Read the Intel supported features and if new exception formats
- * supported, need to load the additional DDC config to enable.
- */
- btintel_read_debug_features(hdev, &features);
-
- /* Set DDC mask for available debug features */
- btintel_set_debug_features(hdev, &features);
-
/* Read the Intel version information after loading the FW */
err = btintel_read_version(hdev, &ver);
if (err)
@@ -2950,7 +2941,6 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
u32 boot_param;
char ddcname[64];
int err;
- struct intel_debug_features features;
struct intel_version_tlv version;
bt_dev_dbg(hdev, "");
@@ -3000,14 +2990,6 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
*/
btintel_load_ddc_config(hdev, ddcname);
- /* Read the Intel supported features and if new exception formats
- * supported, need to load the additional DDC config to enable.
- */
- btintel_read_debug_features(hdev, &features);
-
- /* Set DDC mask for available debug features */
- btintel_set_debug_features(hdev, &features);
-
/* Read the Intel version information after loading the FW */
err = btintel_read_version_tlv(hdev, &version);
if (err)
--
2.32.0.288.g62a8d224e6-goog
This patch allows a user space process to enable/disable the quality
report events dynamically through the set experimental feature mgmt
interface if CONFIG_BT_FEATURE_QUALITY_REPORT is enabled.
Since the quality report feature needs to invoke the callback function
provided by the driver, i.e., hdev->set_quality_report, a valid
controller index is required.
Reviewed-by: Miao-chen Chou <[email protected]>
Signed-off-by: Joseph Hwang <[email protected]>
---
(no changes since v1)
include/net/bluetooth/hci.h | 4 ++
include/net/bluetooth/hci_core.h | 22 ++++--
net/bluetooth/Kconfig | 11 +++
net/bluetooth/mgmt.c | 118 ++++++++++++++++++++++++++++++-
4 files changed, 148 insertions(+), 7 deletions(-)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index b80415011dcd..2811b60e1acc 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -331,6 +331,10 @@ enum {
HCI_CMD_PENDING,
HCI_FORCE_NO_MITM,
+#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
+ HCI_QUALITY_REPORT,
+#endif
+
__HCI_NUM_FLAGS,
};
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index a53e94459ecd..c25de25a7036 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -605,6 +605,9 @@ struct hci_dev {
int (*set_bdaddr)(struct hci_dev *hdev, const bdaddr_t *bdaddr);
void (*cmd_timeout)(struct hci_dev *hdev);
bool (*prevent_wake)(struct hci_dev *hdev);
+#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
+ int (*set_quality_report)(struct hci_dev *hdev, bool enable);
+#endif
};
#define HCI_PHY_HANDLE(handle) (handle & 0xff)
@@ -752,12 +755,19 @@ extern struct mutex hci_cb_list_lock;
#define hci_dev_test_and_clear_flag(hdev, nr) test_and_clear_bit((nr), (hdev)->dev_flags)
#define hci_dev_test_and_change_flag(hdev, nr) test_and_change_bit((nr), (hdev)->dev_flags)
-#define hci_dev_clear_volatile_flags(hdev) \
- do { \
- hci_dev_clear_flag(hdev, HCI_LE_SCAN); \
- hci_dev_clear_flag(hdev, HCI_LE_ADV); \
- hci_dev_clear_flag(hdev, HCI_LL_RPA_RESOLUTION);\
- hci_dev_clear_flag(hdev, HCI_PERIODIC_INQ); \
+#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
+#define hci_dev_clear_flag_quality_report(x) { hci_dev_clear_flag(hdev, x); }
+#else
+#define hci_dev_clear_flag_quality_report(x) {}
+#endif
+
+#define hci_dev_clear_volatile_flags(hdev) \
+ do { \
+ hci_dev_clear_flag(hdev, HCI_LE_SCAN); \
+ hci_dev_clear_flag(hdev, HCI_LE_ADV); \
+ hci_dev_clear_flag(hdev, HCI_LL_RPA_RESOLUTION); \
+ hci_dev_clear_flag(hdev, HCI_PERIODIC_INQ); \
+ hci_dev_clear_flag_quality_report(HCI_QUALITY_REPORT) \
} while (0)
/* ----- HCI interface to upper protocols ----- */
diff --git a/net/bluetooth/Kconfig b/net/bluetooth/Kconfig
index e0ab4cd7afc3..d63c3cdf2d6f 100644
--- a/net/bluetooth/Kconfig
+++ b/net/bluetooth/Kconfig
@@ -148,4 +148,15 @@ config BT_FEATURE_DEBUG
This provides an option to enable/disable debugging statements
at runtime via the experimental features interface.
+config BT_FEATURE_QUALITY_REPORT
+ bool "Runtime option for logging controller quality report events"
+ depends on BT
+ default n
+ help
+ This provides an option to enable/disable controller quality report
+ events logging at runtime via the experimental features interface.
+ The quality report events may include the categories of system
+ exceptions, connections/disconnection, the link quality statistics,
+ etc.
+
source "drivers/bluetooth/Kconfig"
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index d1bf5a55ff85..0de089524d74 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -3791,6 +3791,14 @@ static const u8 debug_uuid[16] = {
};
#endif
+#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
+/* 330859bc-7506-492d-9370-9a6f0614037f */
+static const u8 quality_report_uuid[16] = {
+ 0x7f, 0x03, 0x14, 0x06, 0x6f, 0x9a, 0x70, 0x93,
+ 0x2d, 0x49, 0x06, 0x75, 0xbc, 0x59, 0x08, 0x33,
+};
+#endif
+
/* 671b10b5-42c0-4696-9227-eb28d1b049d6 */
static const u8 simult_central_periph_uuid[16] = {
0xd6, 0x49, 0xb0, 0xd1, 0x28, 0xeb, 0x27, 0x92,
@@ -3806,7 +3814,7 @@ static const u8 rpa_resolution_uuid[16] = {
static int read_exp_features_info(struct sock *sk, struct hci_dev *hdev,
void *data, u16 data_len)
{
- char buf[62]; /* Enough space for 3 features */
+ char buf[82]; /* Enough space for 4 features: 2 + 20 * 4 */
struct mgmt_rp_read_exp_features_info *rp = (void *)buf;
u16 idx = 0;
u32 flags;
@@ -3850,6 +3858,26 @@ static int read_exp_features_info(struct sock *sk, struct hci_dev *hdev,
idx++;
}
+#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
+ if (hdev) {
+ if (hdev->set_quality_report) {
+ /* BIT(0): indicating if set_quality_report is
+ * supported by controller.
+ */
+ flags = BIT(0);
+
+ /* BIT(1): indicating if the feature is enabled. */
+ if (hci_dev_test_flag(hdev, HCI_QUALITY_REPORT))
+ flags |= BIT(1);
+ } else {
+ flags = 0;
+ }
+ memcpy(rp->features[idx].uuid, quality_report_uuid, 16);
+ rp->features[idx].flags = cpu_to_le32(flags);
+ idx++;
+ }
+#endif
+
rp->feature_count = cpu_to_le16(idx);
/* After reading the experimental features information, enable
@@ -3892,6 +3920,23 @@ static int exp_debug_feature_changed(bool enabled, struct sock *skip)
}
#endif
+#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
+static int exp_quality_report_feature_changed(bool enabled, struct sock *skip)
+{
+ struct mgmt_ev_exp_feature_changed ev;
+
+ BT_INFO("enabled %d", enabled);
+
+ memset(&ev, 0, sizeof(ev));
+ memcpy(ev.uuid, quality_report_uuid, 16);
+ ev.flags = cpu_to_le32(enabled ? BIT(0) : 0);
+
+ return mgmt_limited_event(MGMT_EV_EXP_FEATURE_CHANGED, NULL,
+ &ev, sizeof(ev),
+ HCI_MGMT_EXP_FEATURE_EVENTS, skip);
+}
+#endif
+
static int set_exp_feature(struct sock *sk, struct hci_dev *hdev,
void *data, u16 data_len)
{
@@ -4038,6 +4083,77 @@ static int set_exp_feature(struct sock *sk, struct hci_dev *hdev,
return err;
}
+#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
+ if (!memcmp(cp->uuid, quality_report_uuid, 16)) {
+ bool val, changed;
+ int err;
+
+ /* Command requires to use a valid controller index */
+ if (!hdev)
+ return mgmt_cmd_status(sk, MGMT_INDEX_NONE,
+ MGMT_OP_SET_EXP_FEATURE,
+ MGMT_STATUS_INVALID_INDEX);
+
+ /* Parameters are limited to a single octet */
+ if (data_len != MGMT_SET_EXP_FEATURE_SIZE + 1)
+ return mgmt_cmd_status(sk, hdev->id,
+ MGMT_OP_SET_EXP_FEATURE,
+ MGMT_STATUS_INVALID_PARAMS);
+
+ /* Only boolean on/off is supported */
+ if (cp->param[0] != 0x00 && cp->param[0] != 0x01)
+ return mgmt_cmd_status(sk, hdev->id,
+ MGMT_OP_SET_EXP_FEATURE,
+ MGMT_STATUS_INVALID_PARAMS);
+
+ hci_req_sync_lock(hdev);
+
+ val = !!cp->param[0];
+ changed = (val != hci_dev_test_flag(hdev, HCI_QUALITY_REPORT));
+
+ if (!hdev->set_quality_report) {
+ BT_INFO("quality report not supported");
+ err = mgmt_cmd_status(sk, hdev->id,
+ MGMT_OP_SET_EXP_FEATURE,
+ MGMT_STATUS_NOT_SUPPORTED);
+ goto unlock_quality_report;
+ }
+
+ if (changed) {
+ err = hdev->set_quality_report(hdev, val);
+ if (err) {
+ BT_ERR("set_quality_report value %d err %d",
+ val, err);
+ err = mgmt_cmd_status(sk, hdev->id,
+ MGMT_OP_SET_EXP_FEATURE,
+ MGMT_STATUS_FAILED);
+ goto unlock_quality_report;
+ }
+ if (val)
+ hci_dev_set_flag(hdev, HCI_QUALITY_REPORT);
+ else
+ hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT);
+ }
+
+ BT_INFO("quality report enable %d changed %d",
+ val, changed);
+
+ memcpy(rp.uuid, quality_report_uuid, 16);
+ rp.flags = cpu_to_le32(val ? BIT(0) : 0);
+ hci_sock_set_flag(sk, HCI_MGMT_EXP_FEATURE_EVENTS);
+ err = mgmt_cmd_complete(sk, hdev->id,
+ MGMT_OP_SET_EXP_FEATURE, 0,
+ &rp, sizeof(rp));
+
+ if (changed)
+ exp_quality_report_feature_changed(val, sk);
+
+unlock_quality_report:
+ hci_req_sync_unlock(hdev);
+ return err;
+ }
+#endif
+
return mgmt_cmd_status(sk, hdev ? hdev->id : MGMT_INDEX_NONE,
MGMT_OP_SET_EXP_FEATURE,
MGMT_STATUS_NOT_SUPPORTED);
--
2.32.0.288.g62a8d224e6-goog
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=503051
---Test result---
Test Summary:
CheckPatch PASS 2.84 seconds
GitLint PASS 0.46 seconds
BuildKernel PASS 565.50 seconds
TestRunner: Setup PASS 371.21 seconds
TestRunner: l2cap-tester PASS 2.73 seconds
TestRunner: bnep-tester PASS 1.98 seconds
TestRunner: mgmt-tester PASS 29.19 seconds
TestRunner: rfcomm-tester PASS 2.21 seconds
TestRunner: sco-tester PASS 2.10 seconds
TestRunner: smp-tester PASS 2.21 seconds
TestRunner: userchan-tester PASS 1.98 seconds
Details
##############################
Test: CheckPatch - PASS - 2.84 seconds
Run checkpatch.pl script with rule in .checkpatch.conf
##############################
Test: GitLint - PASS - 0.46 seconds
Run gitlint with rule in .gitlint
##############################
Test: BuildKernel - PASS - 565.50 seconds
Build Kernel with minimal configuration supports Bluetooth
##############################
Test: TestRunner: Setup - PASS - 371.21 seconds
Setup environment for running Test Runner
##############################
Test: TestRunner: l2cap-tester - PASS - 2.73 seconds
Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: bnep-tester - PASS - 1.98 seconds
Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: mgmt-tester - PASS - 29.19 seconds
Run test-runner with mgmt-tester
Total: 446, Passed: 433 (97.1%), Failed: 0, Not Run: 13
##############################
Test: TestRunner: rfcomm-tester - PASS - 2.21 seconds
Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: sco-tester - PASS - 2.10 seconds
Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: smp-tester - PASS - 2.21 seconds
Run test-runner with smp-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: userchan-tester - PASS - 1.98 seconds
Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
---
Regards,
Linux Bluetooth
Hi Joseph,
> This patch allows a user space process to enable/disable the quality
> report events dynamically through the set experimental feature mgmt
> interface if CONFIG_BT_FEATURE_QUALITY_REPORT is enabled.
>
> Since the quality report feature needs to invoke the callback function
> provided by the driver, i.e., hdev->set_quality_report, a valid
> controller index is required.
>
> Reviewed-by: Miao-chen Chou <[email protected]>
> Signed-off-by: Joseph Hwang <[email protected]>
> ---
>
> (no changes since v1)
>
> include/net/bluetooth/hci.h | 4 ++
> include/net/bluetooth/hci_core.h | 22 ++++--
> net/bluetooth/Kconfig | 11 +++
> net/bluetooth/mgmt.c | 118 ++++++++++++++++++++++++++++++-
> 4 files changed, 148 insertions(+), 7 deletions(-)
>
> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
> index b80415011dcd..2811b60e1acc 100644
> --- a/include/net/bluetooth/hci.h
> +++ b/include/net/bluetooth/hci.h
> @@ -331,6 +331,10 @@ enum {
> HCI_CMD_PENDING,
> HCI_FORCE_NO_MITM,
>
> +#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
> + HCI_QUALITY_REPORT,
> +#endif
> +
> __HCI_NUM_FLAGS,
> };
>
> diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
> index a53e94459ecd..c25de25a7036 100644
> --- a/include/net/bluetooth/hci_core.h
> +++ b/include/net/bluetooth/hci_core.h
> @@ -605,6 +605,9 @@ struct hci_dev {
> int (*set_bdaddr)(struct hci_dev *hdev, const bdaddr_t *bdaddr);
> void (*cmd_timeout)(struct hci_dev *hdev);
> bool (*prevent_wake)(struct hci_dev *hdev);
> +#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
> + int (*set_quality_report)(struct hci_dev *hdev, bool enable);
> +#endif
> };
>
> #define HCI_PHY_HANDLE(handle) (handle & 0xff)
> @@ -752,12 +755,19 @@ extern struct mutex hci_cb_list_lock;
> #define hci_dev_test_and_clear_flag(hdev, nr) test_and_clear_bit((nr), (hdev)->dev_flags)
> #define hci_dev_test_and_change_flag(hdev, nr) test_and_change_bit((nr), (hdev)->dev_flags)
>
> -#define hci_dev_clear_volatile_flags(hdev) \
> - do { \
> - hci_dev_clear_flag(hdev, HCI_LE_SCAN); \
> - hci_dev_clear_flag(hdev, HCI_LE_ADV); \
> - hci_dev_clear_flag(hdev, HCI_LL_RPA_RESOLUTION);\
> - hci_dev_clear_flag(hdev, HCI_PERIODIC_INQ); \
> +#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
> +#define hci_dev_clear_flag_quality_report(x) { hci_dev_clear_flag(hdev, x); }
> +#else
> +#define hci_dev_clear_flag_quality_report(x) {}
> +#endif
> +
> +#define hci_dev_clear_volatile_flags(hdev) \
> + do { \
> + hci_dev_clear_flag(hdev, HCI_LE_SCAN); \
> + hci_dev_clear_flag(hdev, HCI_LE_ADV); \
> + hci_dev_clear_flag(hdev, HCI_LL_RPA_RESOLUTION); \
> + hci_dev_clear_flag(hdev, HCI_PERIODIC_INQ); \
> + hci_dev_clear_flag_quality_report(HCI_QUALITY_REPORT) \
> } while (0)
>
we are not doing a CONFIG_BT_FEATURE_QUALITY_REPORT here then. This is getting out of control. What is the harm of always adding this feature? I don’t see a large size impact.
> /* ----- HCI interface to upper protocols ----- */
> diff --git a/net/bluetooth/Kconfig b/net/bluetooth/Kconfig
> index e0ab4cd7afc3..d63c3cdf2d6f 100644
> --- a/net/bluetooth/Kconfig
> +++ b/net/bluetooth/Kconfig
> @@ -148,4 +148,15 @@ config BT_FEATURE_DEBUG
> This provides an option to enable/disable debugging statements
> at runtime via the experimental features interface.
>
> +config BT_FEATURE_QUALITY_REPORT
> + bool "Runtime option for logging controller quality report events"
> + depends on BT
> + default n
> + help
> + This provides an option to enable/disable controller quality report
> + events logging at runtime via the experimental features interface.
> + The quality report events may include the categories of system
> + exceptions, connections/disconnection, the link quality statistics,
> + etc.
> +
> source "drivers/bluetooth/Kconfig"
> diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
> index d1bf5a55ff85..0de089524d74 100644
> --- a/net/bluetooth/mgmt.c
> +++ b/net/bluetooth/mgmt.c
> @@ -3791,6 +3791,14 @@ static const u8 debug_uuid[16] = {
> };
> #endif
>
> +#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
> +/* 330859bc-7506-492d-9370-9a6f0614037f */
> +static const u8 quality_report_uuid[16] = {
> + 0x7f, 0x03, 0x14, 0x06, 0x6f, 0x9a, 0x70, 0x93,
> + 0x2d, 0x49, 0x06, 0x75, 0xbc, 0x59, 0x08, 0x33,
> +};
> +#endif
> +
> /* 671b10b5-42c0-4696-9227-eb28d1b049d6 */
> static const u8 simult_central_periph_uuid[16] = {
> 0xd6, 0x49, 0xb0, 0xd1, 0x28, 0xeb, 0x27, 0x92,
> @@ -3806,7 +3814,7 @@ static const u8 rpa_resolution_uuid[16] = {
> static int read_exp_features_info(struct sock *sk, struct hci_dev *hdev,
> void *data, u16 data_len)
> {
> - char buf[62]; /* Enough space for 3 features */
> + char buf[82]; /* Enough space for 4 features: 2 + 20 * 4 */
> struct mgmt_rp_read_exp_features_info *rp = (void *)buf;
> u16 idx = 0;
> u32 flags;
> @@ -3850,6 +3858,26 @@ static int read_exp_features_info(struct sock *sk, struct hci_dev *hdev,
> idx++;
> }
>
> +#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
> + if (hdev) {
> + if (hdev->set_quality_report) {
> + /* BIT(0): indicating if set_quality_report is
> + * supported by controller.
> + */
> + flags = BIT(0);
> +
> + /* BIT(1): indicating if the feature is enabled. */
> + if (hci_dev_test_flag(hdev, HCI_QUALITY_REPORT))
> + flags |= BIT(1);
> + } else {
> + flags = 0;
> + }
> + memcpy(rp->features[idx].uuid, quality_report_uuid, 16);
> + rp->features[idx].flags = cpu_to_le32(flags);
> + idx++;
> + }
> +#endif
> +
> rp->feature_count = cpu_to_le16(idx);
>
> /* After reading the experimental features information, enable
> @@ -3892,6 +3920,23 @@ static int exp_debug_feature_changed(bool enabled, struct sock *skip)
> }
> #endif
>
> +#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
> +static int exp_quality_report_feature_changed(bool enabled, struct sock *skip)
> +{
> + struct mgmt_ev_exp_feature_changed ev;
> +
> + BT_INFO("enabled %d", enabled);
> +
> + memset(&ev, 0, sizeof(ev));
> + memcpy(ev.uuid, quality_report_uuid, 16);
> + ev.flags = cpu_to_le32(enabled ? BIT(0) : 0);
> +
> + return mgmt_limited_event(MGMT_EV_EXP_FEATURE_CHANGED, NULL,
> + &ev, sizeof(ev),
> + HCI_MGMT_EXP_FEATURE_EVENTS, skip);
> +}
> +#endif
> +
> static int set_exp_feature(struct sock *sk, struct hci_dev *hdev,
> void *data, u16 data_len)
> {
> @@ -4038,6 +4083,77 @@ static int set_exp_feature(struct sock *sk, struct hci_dev *hdev,
> return err;
> }
>
> +#ifdef CONFIG_BT_FEATURE_QUALITY_REPORT
> + if (!memcmp(cp->uuid, quality_report_uuid, 16)) {
> + bool val, changed;
> + int err;
> +
> + /* Command requires to use a valid controller index */
> + if (!hdev)
> + return mgmt_cmd_status(sk, MGMT_INDEX_NONE,
> + MGMT_OP_SET_EXP_FEATURE,
> + MGMT_STATUS_INVALID_INDEX);
> +
> + /* Parameters are limited to a single octet */
> + if (data_len != MGMT_SET_EXP_FEATURE_SIZE + 1)
> + return mgmt_cmd_status(sk, hdev->id,
> + MGMT_OP_SET_EXP_FEATURE,
> + MGMT_STATUS_INVALID_PARAMS);
> +
> + /* Only boolean on/off is supported */
> + if (cp->param[0] != 0x00 && cp->param[0] != 0x01)
> + return mgmt_cmd_status(sk, hdev->id,
> + MGMT_OP_SET_EXP_FEATURE,
> + MGMT_STATUS_INVALID_PARAMS);
You really need somewhere here is hdev->set_quality_report is set.
> +
> + hci_req_sync_lock(hdev);
> +
> + val = !!cp->param[0];
> + changed = (val != hci_dev_test_flag(hdev, HCI_QUALITY_REPORT));
> +
> + if (!hdev->set_quality_report) {
> + BT_INFO("quality report not supported");
> + err = mgmt_cmd_status(sk, hdev->id,
> + MGMT_OP_SET_EXP_FEATURE,
> + MGMT_STATUS_NOT_SUPPORTED);
> + goto unlock_quality_report;
> + }
> +
> + if (changed) {
> + err = hdev->set_quality_report(hdev, val);
> + if (err) {
> + BT_ERR("set_quality_report value %d err %d",
> + val, err);
> + err = mgmt_cmd_status(sk, hdev->id,
> + MGMT_OP_SET_EXP_FEATURE,
> + MGMT_STATUS_FAILED);
> + goto unlock_quality_report;
> + }
> + if (val)
> + hci_dev_set_flag(hdev, HCI_QUALITY_REPORT);
> + else
> + hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT);
> + }
> +
> + BT_INFO("quality report enable %d changed %d",
> + val, changed);
> +
> + memcpy(rp.uuid, quality_report_uuid, 16);
> + rp.flags = cpu_to_le32(val ? BIT(0) : 0);
> + hci_sock_set_flag(sk, HCI_MGMT_EXP_FEATURE_EVENTS);
> + err = mgmt_cmd_complete(sk, hdev->id,
> + MGMT_OP_SET_EXP_FEATURE, 0,
> + &rp, sizeof(rp));
> +
> + if (changed)
> + exp_quality_report_feature_changed(val, sk);
> +
> +unlock_quality_report:
> + hci_req_sync_unlock(hdev);
> + return err;
> + }
> +#endif
> +
> return mgmt_cmd_status(sk, hdev ? hdev->id : MGMT_INDEX_NONE,
> MGMT_OP_SET_EXP_FEATURE,
> MGMT_STATUS_NOT_SUPPORTED);
Regards
Marcel