This Realtek device has both wifi and BT components. The latter reports
a USB ID of 04ca:4006, which is not in the table.
The portion of /sys/kernel/debug/usb/devices pertaining to this device is
T: Bus=02 Lev=01 Prnt=01 Port=12 Cnt=04 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=4006 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Larry Finger <[email protected]>
Cc: Stable <[email protected]>
---
v2 - add /sys/kernel/debug/usb/devices output
---
drivers/bluetooth/btusb.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a9855a2dd561..2a3f953172f3 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -452,6 +452,10 @@ static const struct usb_device_id blacklist_table[] = {
/* Additional Realtek 8822CE Bluetooth devices */
{ USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ /* Bluetooth component of Realtek 8852AE device */
+ { USB_DEVICE(0x04ca, 0x4006), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+
{ USB_DEVICE(0x04c5, 0x161f), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0b05, 0x18ef), .driver_info = BTUSB_REALTEK |
--
2.32.0
Hi Larry,
> This Realtek device has both wifi and BT components. The latter reports
> a USB ID of 04ca:4006, which is not in the table.
>
> The portion of /sys/kernel/debug/usb/devices pertaining to this device is
>
> T: Bus=02 Lev=01 Prnt=01 Port=12 Cnt=04 Dev#= 4 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=04ca ProdID=4006 Rev= 0.00
> S: Manufacturer=Realtek
> S: Product=Bluetooth Radio
> S: SerialNumber=00e04c000001
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> Signed-off-by: Larry Finger <[email protected]>
> Cc: Stable <[email protected]>
> ---
> v2 - add /sys/kernel/debug/usb/devices output
> ---
> drivers/bluetooth/btusb.c | 4 ++++
> 1 file changed, 4 insertions(+)
patch has been applied to bluetooth-next tree.
Regards
Marcel
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=526377
---Test result---
Test Summary:
CheckPatch FAIL 0.46 seconds
GitLint PASS 0.10 seconds
BuildKernel PASS 511.10 seconds
TestRunner: Setup PASS 336.26 seconds
TestRunner: l2cap-tester PASS 2.53 seconds
TestRunner: bnep-tester PASS 1.89 seconds
TestRunner: mgmt-tester PASS 30.33 seconds
TestRunner: rfcomm-tester PASS 2.06 seconds
TestRunner: sco-tester PASS 2.00 seconds
TestRunner: smp-tester FAIL 2.06 seconds
TestRunner: userchan-tester PASS 1.93 seconds
Details
##############################
Test: CheckPatch - FAIL - 0.46 seconds
Run checkpatch.pl script with rule in .checkpatch.conf
bluetooth: Add additional Bluetooth part for Realtek 8852AE
WARNING: Invalid email format for stable: 'Stable <[email protected]>', prefer '[email protected]'
#42:
Cc: Stable <[email protected]>
total: 0 errors, 1 warnings, 10 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
"[PATCH] bluetooth: Add additional Bluetooth part for Realtek 8852AE" has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: GitLint - PASS - 0.10 seconds
Run gitlint with rule in .gitlint
##############################
Test: BuildKernel - PASS - 511.10 seconds
Build Kernel with minimal configuration supports Bluetooth
##############################
Test: TestRunner: Setup - PASS - 336.26 seconds
Setup environment for running Test Runner
##############################
Test: TestRunner: l2cap-tester - PASS - 2.53 seconds
Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: bnep-tester - PASS - 1.89 seconds
Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: mgmt-tester - PASS - 30.33 seconds
Run test-runner with mgmt-tester
Total: 448, Passed: 445 (99.3%), Failed: 0, Not Run: 3
##############################
Test: TestRunner: rfcomm-tester - PASS - 2.06 seconds
Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: sco-tester - PASS - 2.00 seconds
Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: smp-tester - FAIL - 2.06 seconds
Run test-runner with smp-tester
Total: 8, Passed: 7 (87.5%), Failed: 1, Not Run: 0
Failed Test Cases
SMP Client - SC Request 2 Failed 0.020 seconds
##############################
Test: TestRunner: userchan-tester - PASS - 1.93 seconds
Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
---
Regards,
Linux Bluetooth