This patch adds a new quality report feature to the
"Read Exp Feature - Success" test.
---
tools/mgmt-tester.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/tools/mgmt-tester.c b/tools/mgmt-tester.c
index 8afd02c32..da53e4484 100644
--- a/tools/mgmt-tester.c
+++ b/tools/mgmt-tester.c
@@ -9334,7 +9334,7 @@ static const struct generic_data set_dev_flags_fail_3 = {
};
static const uint8_t read_exp_feat_param_success[] = {
- 0x02, 0x00, /* Feature Count */
+ 0x03, 0x00, /* Feature Count */
0xd6, 0x49, 0xb0, 0xd1, 0x28, 0xeb, /* UUID - Simultaneous */
0x27, 0x92, 0x96, 0x46, 0xc0, 0x42, /* Central Peripheral */
0xb5, 0x10, 0x1b, 0x67,
@@ -9343,6 +9343,10 @@ static const uint8_t read_exp_feat_param_success[] = {
0xde, 0xb3, 0xea, 0x11, 0x73, 0xc2,
0x48, 0xa1, 0xc0, 0x15,
0x02, 0x00, 0x00, 0x00, /* Flags */
+ 0x7f, 0x03, 0x14, 0x06, 0x6f, 0x9a, /* UUID - Quality Report */
+ 0x70, 0x93, 0x2d, 0x49, 0x06, 0x75,
+ 0xbc, 0x59, 0x08, 0x33,
+ 0x00, 0x00, 0x00, 0x00, /* Flags */
};
static const struct generic_data read_exp_feat_success = {
--
2.33.0.rc2.250.ged5fa647cd-goog
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=534647
---Test result---
Test Summary:
CheckPatch PASS 0.38 seconds
GitLint PASS 0.13 seconds
Prep - Setup ELL PASS 49.11 seconds
Build - Prep PASS 0.16 seconds
Build - Configure PASS 8.57 seconds
Build - Make PASS 216.81 seconds
Make Check PASS 9.11 seconds
Make Distcheck PASS 251.16 seconds
Build w/ext ELL - Configure PASS 8.44 seconds
Build w/ext ELL - Make PASS 201.38 seconds
Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf
##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint
##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL
##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build
##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree
##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree
##############################
Test: Make Check - PASS
Desc: Run 'make check'
##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution
##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration
##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration
---
Regards,
Linux Bluetooth
Hi Joseph,
On Thu, Aug 19, 2021 at 10:38 PM <[email protected]> wrote:
>
> This is automated email and please do not reply to this email!
>
> Dear submitter,
>
> Thank you for submitting the patches to the linux bluetooth mailing list.
> This is a CI test results with your patch series:
> PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=534647
>
> ---Test result---
>
> Test Summary:
> CheckPatch PASS 0.38 seconds
> GitLint PASS 0.13 seconds
> Prep - Setup ELL PASS 49.11 seconds
> Build - Prep PASS 0.16 seconds
> Build - Configure PASS 8.57 seconds
> Build - Make PASS 216.81 seconds
> Make Check PASS 9.11 seconds
> Make Distcheck PASS 251.16 seconds
> Build w/ext ELL - Configure PASS 8.44 seconds
> Build w/ext ELL - Make PASS 201.38 seconds
>
> Details
> ##############################
> Test: CheckPatch - PASS
> Desc: Run checkpatch.pl script with rule in .checkpatch.conf
>
> ##############################
> Test: GitLint - PASS
> Desc: Run gitlint with rule in .gitlint
>
> ##############################
> Test: Prep - Setup ELL - PASS
> Desc: Clone, build, and install ELL
>
> ##############################
> Test: Build - Prep - PASS
> Desc: Prepare environment for build
>
> ##############################
> Test: Build - Configure - PASS
> Desc: Configure the BlueZ source tree
>
> ##############################
> Test: Build - Make - PASS
> Desc: Build the BlueZ source tree
>
> ##############################
> Test: Make Check - PASS
> Desc: Run 'make check'
>
> ##############################
> Test: Make Distcheck - PASS
> Desc: Run distcheck to check the distribution
>
> ##############################
> Test: Build w/ext ELL - Configure - PASS
> Desc: Configure BlueZ source with '--enable-external-ell' configuration
>
> ##############################
> Test: Build w/ext ELL - Make - PASS
> Desc: Build BlueZ source with '--enable-external-ell' configuration
>
>
>
> ---
> Regards,
> Linux Bluetooth
>
Applied, thanks.
--
Luiz Augusto von Dentz