From: Tedd Ho-Jeong An <[email protected]>
This patch adds the flag to identify the Intel legacy ROM products that
don't support WBS like WP and StP.
Fixes: 3df4dfbec0f29 ("Bluetooth: btintel: Move hci quirks to setup routine")
Signed-off-by: Tedd Ho-Jeong An <[email protected]>
---
drivers/bluetooth/btintel.c | 10 +++++++---
drivers/bluetooth/btintel.h | 1 +
drivers/bluetooth/btusb.c | 6 ++++++
3 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 1a4f8b227eac..225ed0373e9d 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -2428,10 +2428,14 @@ static int btintel_setup_combined(struct hci_dev *hdev)
/* Apply the device specific HCI quirks
*
- * WBS for SdP - SdP and Stp have a same hw_varaint but
- * different fw_variant
+ * WBS for SdP - For the Legacy ROM products, only SdP
+ * supports the WBS. But the version information is not
+ * enough to use here because the StP2 and SdP have same
+ * hw_variant and fw_variant. So, this flag is set by
+ * the transport driver(btusb) based on the HW info
+ * (idProduct)
*/
- if (ver.hw_variant == 0x08 && ver.fw_variant == 0x22)
+ if (!btintel_test_flag(hdev, INTEL_NO_WBS_SUPPORT))
set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
&hdev->quirks);
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index c9b24e9299e2..084a5e8dce39 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -152,6 +152,7 @@ enum {
INTEL_BROKEN_INITIAL_NCMD,
INTEL_BROKEN_SHUTDOWN_LED,
INTEL_ROM_LEGACY,
+ INTEL_NO_WBS_SUPPORT,
__INTEL_NUM_FLAGS,
};
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c30d131da784..566501e64c5a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -62,6 +62,7 @@ static struct usb_driver btusb_driver;
#define BTUSB_QCA_WCN6855 0x1000000
#define BTUSB_INTEL_BROKEN_SHUTDOWN_LED 0x2000000
#define BTUSB_INTEL_BROKEN_INITIAL_NCMD 0x4000000
+#define BTUSB_INTEL_NO_WBS_SUPPORT 0x8000000
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
@@ -385,9 +386,11 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
+ BTUSB_INTEL_NO_WBS_SUPPORT |
BTUSB_INTEL_BROKEN_INITIAL_NCMD |
BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED |
+ BTUSB_INTEL_NO_WBS_SUPPORT |
BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED |
@@ -3737,6 +3740,9 @@ static int btusb_probe(struct usb_interface *intf,
hdev->send = btusb_send_frame_intel;
hdev->cmd_timeout = btusb_intel_cmd_timeout;
+ if (id->driver_info & BTUSB_INTEL_NO_WBS_SUPPORT)
+ btintel_set_flag(hdev, INTEL_NO_WBS_SUPPORT);
+
if (id->driver_info & BTUSB_INTEL_BROKEN_INITIAL_NCMD)
btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD);
--
2.25.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=606839
---Test result---
Test Summary:
CheckPatch PASS 1.07 seconds
GitLint PASS 0.35 seconds
SubjectPrefix PASS 0.21 seconds
BuildKernel PASS 29.94 seconds
BuildKernel32 PASS 26.51 seconds
Incremental Build with patchesPASS 36.37 seconds
TestRunner: Setup PASS 478.30 seconds
TestRunner: l2cap-tester PASS 13.18 seconds
TestRunner: bnep-tester PASS 5.86 seconds
TestRunner: mgmt-tester PASS 104.31 seconds
TestRunner: rfcomm-tester PASS 7.16 seconds
TestRunner: sco-tester PASS 7.43 seconds
TestRunner: smp-tester PASS 7.27 seconds
TestRunner: userchan-tester PASS 6.13 seconds
---
Regards,
Linux Bluetooth
Hi Tedd,
> This patch adds the flag to identify the Intel legacy ROM products that
> don't support WBS like WP and StP.
>
> Fixes: 3df4dfbec0f29 ("Bluetooth: btintel: Move hci quirks to setup routine")
> Signed-off-by: Tedd Ho-Jeong An <[email protected]>
> ---
> drivers/bluetooth/btintel.c | 10 +++++++---
> drivers/bluetooth/btintel.h | 1 +
> drivers/bluetooth/btusb.c | 6 ++++++
> 3 files changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
> index 1a4f8b227eac..225ed0373e9d 100644
> --- a/drivers/bluetooth/btintel.c
> +++ b/drivers/bluetooth/btintel.c
> @@ -2428,10 +2428,14 @@ static int btintel_setup_combined(struct hci_dev *hdev)
>
> /* Apply the device specific HCI quirks
> *
> - * WBS for SdP - SdP and Stp have a same hw_varaint but
> - * different fw_variant
> + * WBS for SdP - For the Legacy ROM products, only SdP
> + * supports the WBS. But the version information is not
> + * enough to use here because the StP2 and SdP have same
> + * hw_variant and fw_variant. So, this flag is set by
> + * the transport driver(btusb) based on the HW info
> + * (idProduct)
> */
> - if (ver.hw_variant == 0x08 && ver.fw_variant == 0x22)
> + if (!btintel_test_flag(hdev, INTEL_NO_WBS_SUPPORT))
> set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
> &hdev->quirks);
>
> diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
> index c9b24e9299e2..084a5e8dce39 100644
> --- a/drivers/bluetooth/btintel.h
> +++ b/drivers/bluetooth/btintel.h
> @@ -152,6 +152,7 @@ enum {
> INTEL_BROKEN_INITIAL_NCMD,
> INTEL_BROKEN_SHUTDOWN_LED,
> INTEL_ROM_LEGACY,
> + INTEL_NO_WBS_SUPPORT,
please keep it as INTEL_ROM_LEGACY_NO_WBS or INTEL_ROM_LEGACY_NO_WBS_SUPPORT. It is better to make clear that this is only for our ROM products. Especially since above it is in the section for just the ROM products.
Regards
Marcel