From: Luiz Augusto von Dentz <[email protected]>
Commit d5ebaa7c5f6f6 introduces checks for handle range
(e.g HCI_CONN_HANDLE_MAX) but controllers like Intel AX200 don't seem
to respect the valid range in case of error status:
> HCI Event: Connect Complete (0x03) plen 11
Status: Page Timeout (0x04)
Handle: 65535
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
Link type: ACL (0x01)
Encryption: Disabled (0x00)
[1644965.827560] Bluetooth: hci0: Ignoring HCI_Connection_Complete for
invalid handle
When the above happens it prevents to cleanup the connections since
the stack would attempt to cancel the connection which is no longer in
progress causing the following trace:
< HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
= bluetoothd: src/profile.c:record_cb() Unable to get Hands-Free Voice
gateway SDP record: Connection timed out
> HCI Event: Command Complete (0x0e) plen 10
Create Connection Cancel (0x01|0x0008) ncmd 1
Status: Unknown Connection Identifier (0x02)
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
< HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
Fixes: d5ebaa7c5f6f6 ("Bluetooth: hci_event: Ignore multiple conn complete events")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
---
v2: Check if handle is valid just before assigning it to hci_conn object and
in case it is invalid reset the status to HCI_ERROR_INVALID_PARAMETERS(0x12)
so it can be passed to the likes of hci_connect_cfm and then is translated to
EINVAL by bt_to_errno.
include/net/bluetooth/hci.h | 1 +
net/bluetooth/hci_event.c | 44 ++++++++++++++++++++-----------------
2 files changed, 25 insertions(+), 20 deletions(-)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 8bb81ea4d286..62a9bb022aed 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -587,6 +587,7 @@ enum {
#define HCI_ERROR_CONNECTION_TIMEOUT 0x08
#define HCI_ERROR_REJ_LIMITED_RESOURCES 0x0d
#define HCI_ERROR_REJ_BAD_ADDR 0x0f
+#define HCI_ERROR_INVALID_PARAMETERS 0x12
#define HCI_ERROR_REMOTE_USER_TERM 0x13
#define HCI_ERROR_REMOTE_LOW_RESOURCES 0x14
#define HCI_ERROR_REMOTE_POWER_OFF 0x15
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index abaabfae19cc..a658aa4c7306 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3068,11 +3068,6 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, void *data,
struct hci_ev_conn_complete *ev = data;
struct hci_conn *conn;
- if (__le16_to_cpu(ev->handle) > HCI_CONN_HANDLE_MAX) {
- bt_dev_err(hdev, "Ignoring HCI_Connection_Complete for invalid handle");
- return;
- }
-
bt_dev_dbg(hdev, "status 0x%2.2x", ev->status);
hci_dev_lock(hdev);
@@ -3124,6 +3119,12 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, void *data,
if (!ev->status) {
conn->handle = __le16_to_cpu(ev->handle);
+ if (conn->handle > HCI_CONN_HANDLE_MAX) {
+ bt_dev_err(hdev, "Invalid handle: 0x%4.4x",
+ conn->handle);
+ ev->status = HCI_ERROR_INVALID_PARAMETERS;
+ goto done;
+ }
if (conn->type == ACL_LINK) {
conn->state = BT_CONFIG;
@@ -3164,17 +3165,17 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, void *data,
hci_send_cmd(hdev, HCI_OP_CHANGE_CONN_PTYPE, sizeof(cp),
&cp);
}
- } else {
- conn->state = BT_CLOSED;
- if (conn->type == ACL_LINK)
- mgmt_connect_failed(hdev, &conn->dst, conn->type,
- conn->dst_type, ev->status);
}
if (conn->type == ACL_LINK)
hci_sco_setup(conn, ev->status);
+done:
if (ev->status) {
+ conn->state = BT_CLOSED;
+ if (conn->type == ACL_LINK)
+ mgmt_connect_failed(hdev, &conn->dst, conn->type,
+ conn->dst_type, ev->status);
hci_connect_cfm(conn, ev->status);
hci_conn_del(conn);
} else if (ev->link_type == SCO_LINK) {
@@ -4690,11 +4691,6 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev, void *data,
return;
}
- if (__le16_to_cpu(ev->handle) > HCI_CONN_HANDLE_MAX) {
- bt_dev_err(hdev, "Ignoring HCI_Sync_Conn_Complete for invalid handle");
- return;
- }
-
bt_dev_dbg(hdev, "status 0x%2.2x", ev->status);
hci_dev_lock(hdev);
@@ -4732,6 +4728,14 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev, void *data,
switch (ev->status) {
case 0x00:
conn->handle = __le16_to_cpu(ev->handle);
+ if (conn->handle > HCI_CONN_HANDLE_MAX) {
+ bt_dev_err(hdev, "Invalid handle: 0x%4.4x",
+ conn->handle);
+ ev->status = HCI_ERROR_INVALID_PARAMETERS;
+ conn->state = BT_CLOSED;
+ break;
+ }
+
conn->state = BT_CONNECTED;
conn->type = ev->link_type;
@@ -5527,11 +5531,6 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
struct smp_irk *irk;
u8 addr_type;
- if (handle > HCI_CONN_HANDLE_MAX) {
- bt_dev_err(hdev, "Ignoring HCI_LE_Connection_Complete for invalid handle");
- return;
- }
-
hci_dev_lock(hdev);
/* All controllers implicitly stop advertising in the event of a
@@ -5603,6 +5602,11 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
conn->dst_type = ev_bdaddr_type(hdev, conn->dst_type, NULL);
+ if (handle > HCI_CONN_HANDLE_MAX) {
+ bt_dev_err(hdev, "Invalid handle: 0x%4.4x", conn->handle);
+ status = HCI_ERROR_INVALID_PARAMETERS;
+ }
+
if (status) {
hci_le_conn_failed(conn, status);
goto unlock;
--
2.35.1