2023-04-21 18:57:49

by Luiz Augusto von Dentz

[permalink] [raw]
Subject: [PATCH] Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running

From: Luiz Augusto von Dentz <[email protected]>

This makes sure hci_cmd_sync_queue only queue new work if HCI_RUNNING
has been set otherwise there is a risk of commands being sent while
turning off.

Because hci_cmd_sync_queue can no longer queue work while HCI_RUNNING is
not set it cannot be used to power on adapters so instead
hci_cmd_sync_submit is introduced which bypass the HCI_RUNNING check, so
it behaves like the old implementation.

Link: https://lore.kernel.org/all/CAB4PzUpDMvdc8j2MdeSAy1KkAE-D3woprCwAdYWeOc-3v3c9Sw@mail.gmail.com/
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
---
include/net/bluetooth/hci_sync.h | 2 ++
net/bluetooth/hci_sync.c | 25 +++++++++++++++++++++++--
net/bluetooth/mgmt.c | 12 ++++++++----
3 files changed, 33 insertions(+), 6 deletions(-)

diff --git a/include/net/bluetooth/hci_sync.h b/include/net/bluetooth/hci_sync.h
index f61b249787fc..2495be4d8b82 100644
--- a/include/net/bluetooth/hci_sync.h
+++ b/include/net/bluetooth/hci_sync.h
@@ -41,6 +41,8 @@ void hci_cmd_sync_clear(struct hci_dev *hdev);
void hci_cmd_sync_cancel(struct hci_dev *hdev, int err);
void __hci_cmd_sync_cancel(struct hci_dev *hdev, int err);

+int hci_cmd_sync_submit(struct hci_dev *hdev, hci_cmd_sync_work_func_t func,
+ void *data, hci_cmd_sync_work_destroy_t destroy);
int hci_cmd_sync_queue(struct hci_dev *hdev, hci_cmd_sync_work_func_t func,
void *data, hci_cmd_sync_work_destroy_t destroy);

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 771aaa808967..647a8ce54062 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -684,8 +684,12 @@ void hci_cmd_sync_cancel(struct hci_dev *hdev, int err)
}
EXPORT_SYMBOL(hci_cmd_sync_cancel);

-int hci_cmd_sync_queue(struct hci_dev *hdev, hci_cmd_sync_work_func_t func,
- void *data, hci_cmd_sync_work_destroy_t destroy)
+/* Submit HCI command to be run in as cmd_sync_work:
+ *
+ * - hdev must _not_ be unregistered
+ */
+int hci_cmd_sync_submit(struct hci_dev *hdev, hci_cmd_sync_work_func_t func,
+ void *data, hci_cmd_sync_work_destroy_t destroy)
{
struct hci_cmd_sync_work_entry *entry;

@@ -708,6 +712,23 @@ int hci_cmd_sync_queue(struct hci_dev *hdev, hci_cmd_sync_work_func_t func,

return 0;
}
+EXPORT_SYMBOL(hci_cmd_sync_submit);
+
+/* Queue HCI command:
+ *
+ * - hdev must be running
+ */
+int hci_cmd_sync_queue(struct hci_dev *hdev, hci_cmd_sync_work_func_t func,
+ void *data, hci_cmd_sync_work_destroy_t destroy)
+{
+ /* Only queue command if hdev is running which means it had been opened
+ * and is either on init phase or is already up.
+ */
+ if (!test_bit(HCI_RUNNING, &hdev->flags))
+ return -ENETDOWN;
+
+ return hci_cmd_sync_submit(hdev, func, data, destroy);
+}
EXPORT_SYMBOL(hci_cmd_sync_queue);

int hci_update_eir_sync(struct hci_dev *hdev)
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 13c745876b39..f7b2d0971f24 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -1400,11 +1400,15 @@ static int set_powered(struct sock *sk, struct hci_dev *hdev, void *data,
}

/* Cancel potentially blocking sync operation before power off */
- if (cp->val == 0x00)
+ if (cp->val == 0x00) {
__hci_cmd_sync_cancel(hdev, -EHOSTDOWN);
-
- err = hci_cmd_sync_queue(hdev, set_powered_sync, cmd,
- mgmt_set_powered_complete);
+ err = hci_cmd_sync_queue(hdev, set_powered_sync, cmd,
+ mgmt_set_powered_complete);
+ } else {
+ /* Use hci_cmd_sync_submit since hdev might not be running */
+ err = hci_cmd_sync_submit(hdev, set_powered_sync, cmd,
+ mgmt_set_powered_complete);
+ }

if (err < 0)
mgmt_pending_remove(cmd);
--
2.39.2


2023-04-21 19:51:35

by bluez.test.bot

[permalink] [raw]
Subject: RE: Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=742262

---Test result---

Test Summary:
CheckPatch PASS 0.96 seconds
GitLint FAIL 0.55 seconds
SubjectPrefix PASS 0.10 seconds
BuildKernel PASS 31.75 seconds
CheckAllWarning PASS 34.68 seconds
CheckSparse PASS 39.60 seconds
CheckSmatch PASS 108.36 seconds
BuildKernel32 PASS 30.84 seconds
TestRunnerSetup PASS 438.72 seconds
TestRunner_l2cap-tester PASS 16.88 seconds
TestRunner_iso-tester PASS 21.10 seconds
TestRunner_bnep-tester PASS 5.55 seconds
TestRunner_mgmt-tester PASS 114.61 seconds
TestRunner_rfcomm-tester PASS 8.81 seconds
TestRunner_sco-tester PASS 8.22 seconds
TestRunner_ioctl-tester PASS 9.61 seconds
TestRunner_mesh-tester PASS 7.03 seconds
TestRunner_smp-tester PASS 8.10 seconds
TestRunner_userchan-tester PASS 5.85 seconds
IncrementalBuild PASS 29.47 seconds

Details
##############################
Test: GitLint - FAIL
Desc: Run gitlint
Output:
Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running

WARNING: I3 - ignore-body-lines: gitlint will be switching from using Python regex 'match' (match beginning) to 'search' (match anywhere) semantics. Please review your ignore-body-lines.regex option accordingly. To remove this warning, set general.regex-style-search=True. More details: https://jorisroovers.github.io/gitlint/configuration/#regex-style-search
14: B1 Line exceeds max length (101>80): "Link: https://lore.kernel.org/all/CAB4PzUpDMvdc8j2MdeSAy1KkAE-D3woprCwAdYWeOc-3v3c9Sw@mail.gmail.com/"


---
Regards,
Linux Bluetooth

2023-04-24 05:01:04

by patchwork-bot+bluetooth

[permalink] [raw]
Subject: Re: [PATCH] Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <[email protected]>:

On Fri, 21 Apr 2023 11:47:16 -0700 you wrote:
> From: Luiz Augusto von Dentz <[email protected]>
>
> This makes sure hci_cmd_sync_queue only queue new work if HCI_RUNNING
> has been set otherwise there is a risk of commands being sent while
> turning off.
>
> Because hci_cmd_sync_queue can no longer queue work while HCI_RUNNING is
> not set it cannot be used to power on adapters so instead
> hci_cmd_sync_submit is introduced which bypass the HCI_RUNNING check, so
> it behaves like the old implementation.
>
> [...]

Here is the summary with links:
- Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running
https://git.kernel.org/bluetooth/bluetooth-next/c/54f33d124f3e

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html