Add VID 0489 & PID e102 for MediaTek MT7922 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e102 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Chris Lu <[email protected]>
---
v2: update commit message
v3: fix bot checking error, change title
---
drivers/bluetooth/btusb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c7411557e491..9c886c9cce64 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -635,6 +635,9 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0489, 0xe0f6), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH |
BTUSB_VALID_LE_STATES },
+ { USB_DEVICE(0x0489, 0xe102), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH |
+ BTUSB_VALID_LE_STATES },
/* Additional Realtek 8723AE Bluetooth devices */
{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
--
2.18.0
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=763319
---Test result---
Test Summary:
CheckPatch PASS 1.14 seconds
GitLint PASS 0.53 seconds
SubjectPrefix PASS 0.17 seconds
BuildKernel PASS 32.22 seconds
CheckAllWarning PASS 35.70 seconds
CheckSparse PASS 40.73 seconds
CheckSmatch PASS 112.46 seconds
BuildKernel32 PASS 31.40 seconds
TestRunnerSetup PASS 478.00 seconds
TestRunner_l2cap-tester PASS 22.76 seconds
TestRunner_iso-tester PASS 40.15 seconds
TestRunner_bnep-tester PASS 10.16 seconds
TestRunner_mgmt-tester PASS 212.81 seconds
TestRunner_rfcomm-tester PASS 15.33 seconds
TestRunner_sco-tester PASS 16.32 seconds
TestRunner_ioctl-tester PASS 17.12 seconds
TestRunner_mesh-tester PASS 12.64 seconds
TestRunner_smp-tester PASS 13.61 seconds
TestRunner_userchan-tester PASS 10.59 seconds
IncrementalBuild PASS 34.79 seconds
---
Regards,
Linux Bluetooth
On Fri, Jul 07, 2023 at 02:29:58PM +0800, Chris Lu wrote:
> Add VID 0489 & PID e102 for MediaTek MT7922 USB Bluetooth chip.
>
I've been testing a similar patch here for 0489/e0f1, which is the
vid/pid I see on m my Dell Inspiron laptop.
Dev info is:
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e0f1 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
I've only tested with keyboard/mice HID devices so far, is that
good enough?
Also, do you want me to send a patch or is this enough info ?
--
Roger Gammans
Hello:
This series was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <[email protected]>:
On Fri, 7 Jul 2023 14:29:58 +0800 you wrote:
> Add VID 0489 & PID e102 for MediaTek MT7922 USB Bluetooth chip.
>
> The information in /sys/kernel/debug/usb/devices about the Bluetooth
> device is listed as the below.
>
> T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0489 ProdID=e102 Rev= 1.00
> S: Manufacturer=MediaTek Inc.
> S: Product=Wireless_Device
> S: SerialNumber=000000000
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
>
> [...]
Here is the summary with links:
- [v3,1/2] Bluetooth: btusb: Add new VID/PID 0489/e102 for MT7922
https://git.kernel.org/bluetooth/bluetooth-next/c/159c43e9925e
- [v3,2/2] Bluetooth: btusb: Add new VID/PID 04ca/3804 for MT7922
https://git.kernel.org/bluetooth/bluetooth-next/c/b18d35adebf4
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
On 2023/7/7 14:29, Chris Lu wrote:
> Add VID 0489 & PID e102 for MediaTek MT7922 USB Bluetooth chip.
>
> The information in /sys/kernel/debug/usb/devices about the Bluetooth
> device is listed as the below.
>
> T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0489 ProdID=e102 Rev= 1.00
> S: Manufacturer=MediaTek Inc.
> S: Product=Wireless_Device
> S: SerialNumber=000000000
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
>
> Signed-off-by: Chris Lu <[email protected]>
> ---
> v2: update commit message
> v3: fix bot checking error, change title
Hi Chris, mind to add this patch to v6.4.x stable?
Or end users need to wait for v6.6 to get bluetooth support on laptops
like ASUS G14.
Thanks,
Qu
> ---
> drivers/bluetooth/btusb.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index c7411557e491..9c886c9cce64 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -635,6 +635,9 @@ static const struct usb_device_id blacklist_table[] = {
> { USB_DEVICE(0x0489, 0xe0f6), .driver_info = BTUSB_MEDIATEK |
> BTUSB_WIDEBAND_SPEECH |
> BTUSB_VALID_LE_STATES },
> + { USB_DEVICE(0x0489, 0xe102), .driver_info = BTUSB_MEDIATEK |
> + BTUSB_WIDEBAND_SPEECH |
> + BTUSB_VALID_LE_STATES },
>
> /* Additional Realtek 8723AE Bluetooth devices */
> { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },