From: Luiz Augusto von Dentz <[email protected]>
This moves QoS capabilities to its own dict property just as it was done
for MediaTransport QoS configuration.
---
doc/org.bluez.MediaEndpoint.rst | 172 ++++++++++++++------------------
1 file changed, 77 insertions(+), 95 deletions(-)
diff --git a/doc/org.bluez.MediaEndpoint.rst b/doc/org.bluez.MediaEndpoint.rst
index cba8cb3edc6e..0e201ff9dc6a 100644
--- a/doc/org.bluez.MediaEndpoint.rst
+++ b/doc/org.bluez.MediaEndpoint.rst
@@ -41,57 +41,31 @@ void SetConfiguration(object transport, dict properties)
See Metadata property.
- :uint32 Location [ISO only]:
+ :dict QoS [ISO only]:
- See Location property.
-
- :byte Framing [ISO only]:
-
- See Framing property.
-
- :byte PHY [ISO only]:
-
- See PHY property.
-
- :uint16 MaximumLatency [ISO only]:
-
- See MaximumLatency property.
-
- :uint32 MinimumDelay [ISO only]:
-
- See MinimumDelay property.
-
- :uint32 MaximumDelay [ISO only]:
-
- See MaximumDelay property.
-
- :uint32 PreferredMinimumDelay [ISO only]:
-
- See PreferredMinimumDelay property.
-
- :uint32 PreferredMaximumDelay [ISO only]:
-
- See PreferredMaximumDelay property.
+ See **org.bluez.MediaTransport(5)** QoS property.
array{byte} SelectConfiguration(array{byte} capabilities)
`````````````````````````````````````````````````````````
Select preferable configuration from the supported capabilities.
- Returns a configuration which can be used to setup a transport.
+ Returns a configuration which can be used to setup a transport, see
+ **org.bluez.MediaTransport(5)** for possible values.
Note: There is no need to cache the selected configuration since on
success the configuration is send back as parameter of SetConfiguration.
-dict SelectProperties(dict properties)
-``````````````````````````````````````
+dict SelectProperties(dict capabilities)
+````````````````````````````````````````
- Select preferable properties from the supported properties:
+ Select configuration from the supported capabilities:
:object Endpoint [ISO only]:
:Refer to SetConfiguration for the list of other possible properties.:
- Returns propeties which can be used to setup a transport.
+ Returns a configuration which can be used to setup a transport, see
+ **org.bluez.MediaTransport(5)** for possible values.
Note: There is no need to cache the selected properties since on
success the configuration is send back as parameter of SetConfiguration.
@@ -154,71 +128,79 @@ bool DelayReporting [readonly, optional]
Indicates if endpoint supports Delay Reporting.
-byte Framing [ISO only]
-```````````````````````
-
- Indicates endpoint support framing.
-
-byte PHY [ISO only]
-```````````````````
-
- Indicates endpoint supported PHY.
-
- Possible values:
-
- :bit 0:
-
- LE 1M
-
- :bit 1:
-
- LE 2M
-
- :bit 2:
-
- LE Coded
-
-byte Retransmissions [ISO only]
-```````````````````````````````
-
- Indicates endpoint preferred number of retransmissions.
-
-uint16_t MaximumLatency [ISO only]
-``````````````````````````````````
-
- Indicates endpoint maximum latency.
-
-uint32_t MinimumDelay [ISO only]
-````````````````````````````````
-
- Indicates endpoint minimum presentation delay.
-
-uint32_t MaximumDelay [ISO only]
-````````````````````````````````
-
- Indicates endpoint maximum presentation delay.
-
-uint32_t PreferredMinimumDelay [ISO only]
-`````````````````````````````````````````
-
- Indicates endpoint preferred minimum presentation delay.
-
-uint32_t PreferredMaximumDelay [ISO only]
-`````````````````````````````````````````
-
- Indicates endpoint preferred maximum presentation delay.
-
-uint32 Location [ISO only]
-``````````````````````````
+uint32 Locations [readonly, optional, ISO only, experimental]
+`````````````````````````````````````````````````````````````
Indicates endpoint supported locations.
-uint16 SupportedContext [ISO only]
-``````````````````````````````````
+uint16 SupportedContext [readonly, optional, ISO only, experimental]
+````````````````````````````````````````````````````````````````````
Indicates endpoint supported audio context.
-uint16 Context [ISO only]
-`````````````````````````
+uint16 Context [readonly, optional, ISO only, experimental]
+```````````````````````````````````````````````````````````
Indicates endpoint available audio context.
+
+dict QoS [readonly, optional, ISO only, experimental]
+`````````````````````````````````````````````````````
+
+ Indicates QoS capabilities.
+
+ :byte Framing:
+
+ Indicates endpoint support framing.
+
+
+ Possible Values:
+
+ :0x00:
+
+ Unframed PDUs supported.
+
+ :0x01:
+
+ Unframed PDUs not supported.
+
+ :byte PHY:
+
+ Indicates endpoint preferred PHY.
+
+ Possible values:
+
+ :bit 0:
+
+ LE 1M preferred.
+
+ :bit 1:
+
+ LE 2M preferred.
+
+ :bit 2:
+
+ LE Coded preferred.
+
+ :byte Retransmissions:
+
+ Indicates endpoint preferred number of retransmissions.
+
+ :uint16 MaximumLatency:
+
+ Indicates endpoint maximum latency.
+
+ :uint32 MinimumDelay:
+
+ Indicates endpoint minimum presentation delay.
+
+ :uint32 MaximumDelay:
+
+ Indicates endpoint maximum presentation delay.
+
+ :uint32 PreferredMinimumDelay:
+
+ Indicates endpoint preferred minimum presentation delay.
+
+ :uint32 PreferredMaximumDelay:
+
+ Indicates endpoint preferred maximum presentation delay.
--
2.41.0