From: Luiz Augusto von Dentz <[email protected]>
This renames advertisement-monitor-api.txt to
org.bluez.AdvertisementMonitor*.rst and generate manpages
org.bluez.AdvertisementMonitor*.5.
---
Makefile.am | 12 +-
doc/advertisement-monitor-api.txt | 187 ------------------
doc/org.bluez.AdvertisementMonitor.rst | 153 ++++++++++++++
doc/org.bluez.AdvertisementMonitorManager.rst | 90 +++++++++
4 files changed, 252 insertions(+), 190 deletions(-)
delete mode 100644 doc/advertisement-monitor-api.txt
create mode 100644 doc/org.bluez.AdvertisementMonitor.rst
create mode 100644 doc/org.bluez.AdvertisementMonitorManager.rst
diff --git a/Makefile.am b/Makefile.am
index 239d2da7bb05..ae44937a50e1 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -373,7 +373,9 @@ man_MANS += doc/org.bluez.GattManager.5 doc/org.bluez.GattProfile.5 \
doc/org.bluez.GattCharacteristic.5 \
doc/org.bluez.GattDescriptor.5 \
doc/org.bluez.LEAdvertisingManager.5 \
- doc/org.bluez.LEAdvertisement.5
+ doc/org.bluez.LEAdvertisement.5 \
+ doc/org.bluez.AdvertisementMonitorManager.5 \
+ doc/org.bluez.AdvertisementMonitor.5
endif
manual_pages += src/bluetoothd.8
manual_pages += doc/org.bluez.Adapter.5 doc/org.bluez.Device.5 \
@@ -392,7 +394,9 @@ manual_pages += doc/org.bluez.GattManager.5 doc/org.bluez.GattProfile.5 \
doc/org.bluez.GattCharacteristic.5 \
doc/org.bluez.GattDescriptor.5 \
doc/org.bluez.LEAdvertisingManager.5 \
- doc/org.bluez.LEAdvertisement.5
+ doc/org.bluez.LEAdvertisement.5 \
+ doc/org.bluez.AdvertisementMonitorManager.5 \
+ doc/org.bluez.AdvertisementMonitor.5
EXTRA_DIST += src/genbuiltin src/bluetooth.conf \
src/main.conf profiles/network/network.conf \
@@ -450,7 +454,9 @@ EXTRA_DIST += doc/org.bluez.GattManager.rst doc/org.bluez.GattProfile.rst\
doc/org.bluez.GattCharacteristic.rst \
doc/org.bluez.GattDescriptor.rst \
doc/org.bluez.LEAdvertisingManager.rst \
- doc/org.bluez.LEAdvertisement.rst
+ doc/org.bluez.LEAdvertisement.rst \
+ doc/org.bluez.AdvertisementMonitorManager.rst \
+ doc/org.bluez.AdvertisementMonitor.rst
EXTRA_DIST += doc/obex-api.txt doc/obex-agent-api.txt
diff --git a/doc/advertisement-monitor-api.txt b/doc/advertisement-monitor-api.txt
deleted file mode 100644
index 9189f2cceb96..000000000000
--- a/doc/advertisement-monitor-api.txt
+++ /dev/null
@@ -1,187 +0,0 @@
-BlueZ D-Bus Advertisement Monitor API Description
-*************************************************
-
-This API allows an client to specify a job of monitoring advertisements by
-registering the root of hierarchy and then exposing advertisement monitors
-under the root with filtering conditions, thresholds of RSSI and timers
-of RSSI thresholds.
-
-Once a monitoring job is activated by BlueZ, the client can expect to get
-notified on the targeted advertisements no matter if there is an ongoing
-discovery session (a discovery session is started/stopped with methods in
-org.bluez.Adapter1 interface).
-
-Advertisement Monitor hierarchy
-===============================
-Service org.bluez
-Interface org.bluez.AdvertisementMonitor1 [experimental]
-Object path freely definable
-
-Methods void Release() [noreply]
-
- This gets called as a signal for a client to perform
- clean-up when (1)a monitor cannot be activated after it
- was exposed or (2)a monitor has been deactivated.
-
- void Activate() [noreply]
-
- After a monitor was exposed, this gets called as a
- signal for client to get acknowledged when a monitor
- has been activated, so the client can expect to receive
- calls on DeviceFound() or DeviceLost().
-
- void DeviceFound(object device) [noreply]
-
- This gets called to notify the client of finding the
- targeted device. Once receiving the call, the client
- should start to monitor the corresponding device to
- retrieve the changes on RSSI and advertisement content.
-
- void DeviceLost(object device) [noreply]
-
- This gets called to notify the client of losing the
- targeted device. Once receiving this call, the client
- should stop monitoring the corresponding device.
-
-Properties string Type [read-only]
-
- The type of the monitor. See SupportedMonitorTypes in
- org.bluez.AdvertisementMonitorManager1 for the available
- options.
-
- Int16 RSSILowThreshold [read-only, optional]
-
- Used in conjunction with RSSILowTimeout to determine
- whether a device becomes out-of-range. Valid range is
- -127 to 20 (dBm), while 127 indicates unset.
-
- Int16 RSSIHighThreshold [read-only, optional]
-
- Used in conjunction with RSSIHighTimeout to determine
- whether a device becomes in-range. Valid range is
- -127 to 20 (dBm), while 127 indicates unset.
-
- Uint16 RSSILowTimeout [read-only, optional]
-
- The time it takes to consider a device as out-of-range.
- If this many seconds elapses without receiving any
- signal at least as strong as RSSILowThreshold, a
- currently in-range device will be considered as
- out-of-range (lost). Valid range is 1 to 300 (seconds),
- while 0 indicates unset.
-
- Uint16 RSSIHighTimeout [read-only, optional]
-
- The time it takes to consider a device as in-range.
- If this many seconds elapses while we continuously
- receive signals at least as strong as RSSIHighThreshold,
- a currently out-of-range device will be considered as
- in-range (found). Valid range is 1 to 300 (seconds),
- while 0 indicates unset.
-
- Uint16 RSSISamplingPeriod [read-only, optional]
-
- Grouping rules on how to propagate the received
- advertisement packets to the client. Valid range is 0 to
- 255 while 256 indicates unset.
-
- The meaning of this property is as follows:
- 0:
- All advertisement packets from in-range devices
- would be propagated.
- 255:
- Only the first advertisement packet of in-range
- devices would be propagated. If the device
- becomes lost, then the first packet when it is
- found again will also be propagated.
- 1 to 254:
- Advertisement packets would be grouped into
- 100ms * N time period. Packets in the same group
- will only be reported once, with the RSSI value
- being averaged out.
-
- Currently this is unimplemented in user space, so the
- value is only used to be forwarded to the kernel.
-
- array{(uint8, uint8, array{byte})} Patterns [read-only, optional]
-
- If the Type property is set to "or_patterns", then this
- property must exist and have at least one entry in the
- array.
-
- The structure of a pattern contains the following:
- uint8 start_position
- The index in an AD data field where the search
- should start. The beginning of an AD data field
- is index 0.
- uint8 AD_data_type
- See https://www.bluetooth.com/specifications/
- assigned-numbers/generic-access-profile/ for
- the possible allowed value.
- array{byte} content_of_pattern
- This is the value of the pattern. The maximum
- length of the bytes is 31.
-
-Advertisement Monitor Manager hierarchy
-=======================================
-Service org.bluez
-Interface org.bluez.AdvertisementMonitorManager1 [experimental]
-Object path /org/bluez/{hci0,hci1,...}
-
-Methods void RegisterMonitor(object application)
-
- This registers the root path of a hierarchy of
- advertisement monitors.
- The application object path together with the D-Bus
- system bus connection ID define the identification of
- the application registering advertisement monitors.
- Once a root path is registered by a client via this
- method, the client can freely expose/unexpose
- advertisement monitors without re-registering the root
- path again. After use, the client should call
- UnregisterMonitor() method to invalidate the
- advertisement monitors.
-
- Possible errors: org.bluez.Error.InvalidArguments
- org.bluez.Error.AlreadyExists
- org.bluez.Error.Failed
-
- void UnregisterMonitor(object application)
-
- This unregisters a hierarchy of advertisement monitors
- that has been previously registered. The object path
- parameter must match the same value that has been used
- on registration. Upon unregistration, the advertisement
- monitor(s) should expect to receive Release() method as
- the signal that the advertisement monitor(s) has been
- deactivated.
-
- Possible errors: org.bluez.Error.InvalidArguments
- org.bluez.Error.DoesNotExist
-
-Properties array{string} SupportedMonitorTypes [read-only]
-
- This lists the supported types of advertisement
- monitors. An application should check this before
- instantiate and expose an object of
- org.bluez.AdvertisementMonitor1.
-
- Possible values for monitor types:
-
- "or_patterns"
- Patterns with logic OR applied. With this type,
- property "Patterns" must exist and has at least
- one pattern.
-
- array{string} SupportedFeatures [read-only]
-
- This lists the features of advertisement monitoring
- supported by BlueZ.
-
- Possible values for features:
-
- "controller-patterns"
- If the controller is capable of performing
- advertisement monitoring by patterns, BlueZ
- would offload the patterns to the controller to
- reduce power consumption.
diff --git a/doc/org.bluez.AdvertisementMonitor.rst b/doc/org.bluez.AdvertisementMonitor.rst
new file mode 100644
index 000000000000..98852ac68b59
--- /dev/null
+++ b/doc/org.bluez.AdvertisementMonitor.rst
@@ -0,0 +1,153 @@
+==============================
+org.bluez.AdvertisementMonitor
+==============================
+
+--------------------------------------------------
+BlueZ D-Bus AdvertisementMonitor API documentation
+--------------------------------------------------
+
+:Version: BlueZ
+:Date: October 2023
+:Manual section: 5
+:Manual group: Linux System Administration
+
+Description
+===========
+
+This API allows an client to specify a job of monitoring advertisements by
+registering the root of hierarchy and then exposing advertisement monitors
+under the root with filtering conditions, thresholds of RSSI and timers
+of RSSI thresholds.
+
+Once a monitoring job is activated by **bluetoothd(8)**, the client can expect
+to get notified on the targeted advertisements no matter if there is an ongoing
+discovery session (see **StartDiscovery()** in **org.bluez.Adapter(5)**).
+
+Interface
+=========
+
+:Service: org.bluez
+:Interface: org.bluez.AdvertisementMonitor1 [experimental]
+:Object path: freely definable
+
+Methods
+-------
+
+void Release() [noreply]
+````````````````````````
+
+ This gets called as a signal for a client to perform clean-up when:
+
+ - Monitor cannot be activated after it was exposed
+ - Monitor has been deactivated.
+
+void Activate() [noreply]
+`````````````````````````
+
+ After a monitor was exposed, this gets called as a signal for client to
+ get acknowledged when a monitor has been activated, so the client can
+ expect to receive calls on **DeviceFound()** or **DeviceLost()**.
+
+void DeviceFound(object device) [noreply]
+`````````````````````````````````````````
+
+ This gets called to notify the client of finding the targeted device.
+ Once receiving the call, the client should start to monitor the
+ corresponding device to retrieve the changes on RSSI and advertisement
+ content.
+
+void DeviceLost(object device) [noreply]
+````````````````````````````````````````
+
+ This gets called to notify the client of losing the targeted device.
+ Once receiving this call, the client should stop monitoring the
+ corresponding device.
+
+Properties
+----------
+
+string Type [read-only]
+```````````````````````
+
+ The type of the monitor. See **SupportedMonitorTypes** in
+ **org.bluez.AdvertisementMonitorManager(5)** for the available options.
+
+int16 RSSILowThreshold [read-only, optional]
+````````````````````````````````````````````
+
+ Used in conjunction with **RSSILowTimeout** to determine whether a
+ device becomes out-of-range. Valid range is -127 to 20 (dBm), while 127
+ indicates unset.
+
+int16 RSSIHighThreshold [read-only, optional]
+`````````````````````````````````````````````
+
+ Used in conjunction with RSSIHighTimeout to determine whether a device
+ becomes in-range. Valid range is -127 to 20 (dBm), while 127 indicates
+ unset.
+
+uint16 RSSILowTimeout [read-only, optional]
+```````````````````````````````````````````
+
+ The time it takes to consider a device as out-of-range. If this many
+ seconds elapses without receiving any signal at least as strong as
+ **RSSILowThreshold**, a currently in-range device will be considered as
+ out-of-range (lost). Valid range is 1 to 300 (seconds), while 0
+ indicates unset.
+
+uint16 RSSIHighTimeout [read-only, optional]
+````````````````````````````````````````````
+
+ The time it takes to consider a device as in-range. If this many
+ seconds elapses while we continuouslyreceive signals at least as strong
+ as **RSSIHighThreshold**, a currently out-of-range device will be
+ considered as in-range (found). Valid range is 1 to 300 (seconds),
+ while 0 indicates unset.
+
+uint16 RSSISamplingPeriod [read-only, optional]
+```````````````````````````````````````````````
+
+ Grouping rules on how to propagate the received advertisement packets
+ to the client.
+
+ Possible values:
+
+ :0:
+ All advertisement packets from in-range devices would be
+ propagated.
+
+ :255:
+ Only the first advertisement packet of in-range devices would
+ be propagated. If the device becomes lost, then the first
+ packet when it is found again will also be propagated.
+
+ :1 to 254:
+ Advertisement packets would be grouped into 100ms * N time
+ period. Packets in the same group will only be reported once,
+ with the RSSI value being averaged out.
+
+ Currently this is unimplemented in user space, so the value is only
+ used to be forwarded to the kernel.
+
+array{(uint8, uint8, array{byte})} Patterns [read-only, optional]
+`````````````````````````````````````````````````````````````````
+
+ If the **Type** property is set to **"or_patterns"**, then this
+ property must exist and have at least one entry in the array.
+
+ The structure of a pattern contains the following:
+
+ :uint8 start_position:
+
+ The index in an AD data field where the search hould start. The
+ beginning of an AD data field is index 0.
+
+ :uint8 AD_data_type:
+
+ See https://www.bluetooth.com/specifications/assigned-numbers/
+ generic-access-profile/ for the possible allowed value.
+
+ :array{byte} content_of_pattern:
+
+ This is the value of the pattern. The maximum length of the
+ bytes is 31.
diff --git a/doc/org.bluez.AdvertisementMonitorManager.rst b/doc/org.bluez.AdvertisementMonitorManager.rst
new file mode 100644
index 000000000000..3775a483543c
--- /dev/null
+++ b/doc/org.bluez.AdvertisementMonitorManager.rst
@@ -0,0 +1,90 @@
+=====================================
+org.bluez.AdvertisementMonitorManager
+=====================================
+
+---------------------------------------------------------
+BlueZ D-Bus AdvertisementMonitorManager API documentation
+---------------------------------------------------------
+
+:Version: BlueZ
+:Date: October 2023
+:Manual section: 5
+:Manual group: Linux System Administration
+
+Interface
+=========
+
+Service org.bluez
+Interface org.bluez.AdvertisementMonitorManager1 [experimental]
+Object path /org/bluez/{hci0,hci1,...}
+
+Methods
+-------
+
+void RegisterMonitor(object application)
+````````````````````````````````````````
+
+ Registers the root path of a hierarchy of advertisement monitors
+ implementing **org.bluez.AdvertisementMonitor(5)**.
+
+ The application object path together with the D-Bus ystem bus
+ connection ID define the identification of the application registering
+ advertisement monitors.
+
+ Once a root path is registered by a client via this method, the client
+ can freely expose/unexpose advertisement monitors without re-registering
+ the root path again. After use, the client should call
+ **UnregisterMonitor()** method to invalidate the advertisement monitors.
+
+ Possible errors:
+
+ :org.bluez.Error.InvalidArguments:
+ :org.bluez.Error.AlreadyExists:
+ :org.bluez.Error.Failed:
+
+void UnregisterMonitor(object application)
+``````````````````````````````````````````
+
+ Unregisters a hierarchy of advertisement monitors that has been
+ previously registered with **RegisterMonitor()**. The object path
+ parameter must match the same value that has been used on registration.
+
+ Upon unregistration, the advertisement monitor(s) should expect to
+ receive **Release()** method as the signal that the advertisement
+ monitor(s) has been deactivated.
+
+ Possible errors:
+
+ :org.bluez.Error.InvalidArguments:
+ :org.bluez.Error.DoesNotExist:
+
+Properties
+----------
+
+array{string} SupportedMonitorTypes [read-only]
+```````````````````````````````````````````````
+
+ This lists the supported types of advertisement monitors. An application
+ should check this before instantiate and expose an object of
+ **org.bluez.AdvertisementMonitor(5)**.
+
+ Possible values:
+
+ :"or_patterns":
+
+ Patterns with logic OR applied. With this type, property
+ **Patterns** must exist and has at least one pattern.
+
+array{string} SupportedFeatures [read-only]
+```````````````````````````````````````````
+
+ This lists the features of advertisement monitoring supported by
+ **bluetoothd(8)**.
+
+ Possible values:
+
+ :"controller-patterns":
+
+ If the controller is capable of performing advertisement
+ monitoring by patterns, **bluetoothd(8)** would offload the
+ patterns to the controller to reduce power consumption.
--
2.41.0