From: Bartosz Golaszewski <[email protected]>
Use the pwrseq subsystem's consumer API to run the power-up sequence for
the Bluetooth module of the QCA6390 package.
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
drivers/bluetooth/hci_qca.c | 74 +++++++++++++++++++++++++++++--------
1 file changed, 59 insertions(+), 15 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 8a60ad7acd70..d31dcea650c1 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -29,6 +29,7 @@
#include <linux/of.h>
#include <linux/acpi.h>
#include <linux/platform_device.h>
+#include <linux/pwrseq/consumer.h>
#include <linux/regulator/consumer.h>
#include <linux/serdev.h>
#include <linux/mutex.h>
@@ -215,6 +216,7 @@ struct qca_power {
struct regulator_bulk_data *vreg_bulk;
int num_vregs;
bool vregs_on;
+ struct pwrseq_desc *pwrseq;
};
struct qca_serdev {
@@ -1682,6 +1684,27 @@ static bool qca_wakeup(struct hci_dev *hdev)
return wakeup;
}
+static int qca_port_reopen(struct hci_uart *hu)
+{
+ int ret;
+
+ /* Now the device is in ready state to communicate with host.
+ * To sync host with device we need to reopen port.
+ * Without this, we will have RTS and CTS synchronization
+ * issues.
+ */
+ serdev_device_close(hu->serdev);
+ ret = serdev_device_open(hu->serdev);
+ if (ret) {
+ bt_dev_err(hu->hdev, "failed to open port");
+ return ret;
+ }
+
+ hci_uart_set_flow_control(hu, false);
+
+ return 0;
+}
+
static int qca_regulator_init(struct hci_uart *hu)
{
enum qca_btsoc_type soc_type = qca_soc_type(hu);
@@ -1750,21 +1773,7 @@ static int qca_regulator_init(struct hci_uart *hu)
break;
}
- /* Now the device is in ready state to communicate with host.
- * To sync host with device we need to reopen port.
- * Without this, we will have RTS and CTS synchronization
- * issues.
- */
- serdev_device_close(hu->serdev);
- ret = serdev_device_open(hu->serdev);
- if (ret) {
- bt_dev_err(hu->hdev, "failed to open port");
- return ret;
- }
-
- hci_uart_set_flow_control(hu, false);
-
- return 0;
+ return qca_port_reopen(hu);
}
static int qca_power_on(struct hci_dev *hdev)
@@ -1792,6 +1801,17 @@ static int qca_power_on(struct hci_dev *hdev)
ret = qca_regulator_init(hu);
break;
+ case QCA_QCA6390:
+ qcadev = serdev_device_get_drvdata(hu->serdev);
+ ret = pwrseq_power_on(qcadev->bt_power->pwrseq);
+ if (ret)
+ return ret;
+
+ ret = qca_port_reopen(hu);
+ if (ret)
+ return ret;
+ break;
+
default:
qcadev = serdev_device_get_drvdata(hu->serdev);
if (qcadev->bt_en) {
@@ -2170,6 +2190,10 @@ static void qca_power_shutdown(struct hci_uart *hu)
}
break;
+ case QCA_QCA6390:
+ pwrseq_power_off(qcadev->bt_power->pwrseq);
+ break;
+
default:
gpiod_set_value_cansleep(qcadev->bt_en, 0);
}
@@ -2308,12 +2332,25 @@ static int qca_serdev_probe(struct serdev_device *serdev)
case QCA_WCN6750:
case QCA_WCN6855:
case QCA_WCN7850:
+ case QCA_QCA6390:
qcadev->bt_power = devm_kzalloc(&serdev->dev,
sizeof(struct qca_power),
GFP_KERNEL);
if (!qcadev->bt_power)
return -ENOMEM;
+ break;
+ default:
+ break;
+ }
+ switch (qcadev->btsoc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ case QCA_WCN6750:
+ case QCA_WCN6855:
+ case QCA_WCN7850:
qcadev->bt_power->dev = &serdev->dev;
err = qca_init_regulators(qcadev->bt_power, data->vregs,
data->num_vregs);
@@ -2354,6 +2391,13 @@ static int qca_serdev_probe(struct serdev_device *serdev)
}
break;
+ case QCA_QCA6390:
+ qcadev->bt_power->pwrseq = devm_pwrseq_get(&serdev->dev,
+ "bluetooth");
+ if (IS_ERR(qcadev->bt_power->pwrseq))
+ return PTR_ERR(qcadev->bt_power->pwrseq);
+ fallthrough;
+
default:
qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
GPIOD_OUT_LOW);
--
2.40.1