This enables prints for firmware download which can help automation
tests to verify firmware download functionality.
A new flag BTNXPUART_FW_DOWNLOAD_ABORT is added which handles the
situation where driver is removed while firmware download is in
progress.
This also adds a check before freeing the rx->skb in flush and close
functions to handle the kernel crash seen in case of firmware download
timeout.
Signed-off-by: Neeraj Sanjay Kale <[email protected]>
Tested-by: Guillaume Legoupil <[email protected]>
---
v2: Handle firmware download abort scenario. (Guillaume Legoupil)
v3: Minor corrections. Add details to commit message.
---
drivers/bluetooth/btnxpuart.c | 67 +++++++++++++++++++++++------------
1 file changed, 45 insertions(+), 22 deletions(-)
diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index 0b93c2ff29e4..7aed5298ee6f 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -29,6 +29,7 @@
#define BTNXPUART_CHECK_BOOT_SIGNATURE 3
#define BTNXPUART_SERDEV_OPEN 4
#define BTNXPUART_IR_IN_PROGRESS 5
+#define BTNXPUART_FW_DOWNLOAD_ABORT 6
/* NXP HW err codes */
#define BTNXPUART_IR_HW_ERR 0xb0
@@ -159,6 +160,7 @@ struct btnxpuart_dev {
u8 fw_name[MAX_FW_FILE_NAME_LEN];
u32 fw_dnld_v1_offset;
u32 fw_v1_sent_bytes;
+ u32 fw_dnld_v3_offset;
u32 fw_v3_offset_correction;
u32 fw_v1_expected_len;
u32 boot_reg_offset;
@@ -550,6 +552,7 @@ static int nxp_download_firmware(struct hci_dev *hdev)
nxpdev->fw_v1_sent_bytes = 0;
nxpdev->fw_v1_expected_len = HDR_LEN;
nxpdev->boot_reg_offset = 0;
+ nxpdev->fw_dnld_v3_offset = 0;
nxpdev->fw_v3_offset_correction = 0;
nxpdev->baudrate_changed = false;
nxpdev->timeout_changed = false;
@@ -564,14 +567,23 @@ static int nxp_download_firmware(struct hci_dev *hdev)
!test_bit(BTNXPUART_FW_DOWNLOADING,
&nxpdev->tx_state),
msecs_to_jiffies(60000));
+
+ release_firmware(nxpdev->fw);
+ memset(nxpdev->fw_name, 0, sizeof(nxpdev->fw_name));
+
if (err == 0) {
- bt_dev_err(hdev, "FW Download Timeout.");
+ bt_dev_err(hdev, "FW Download Timeout. offset: %d",
+ nxpdev->fw_dnld_v1_offset ?
+ nxpdev->fw_dnld_v1_offset :
+ nxpdev->fw_dnld_v3_offset);
return -ETIMEDOUT;
}
+ if (test_bit(BTNXPUART_FW_DOWNLOAD_ABORT, &nxpdev->tx_state)) {
+ bt_dev_err(hdev, "FW Download Aborted");
+ return -EINTR;
+ }
serdev_device_set_flow_control(nxpdev->serdev, true);
- release_firmware(nxpdev->fw);
- memset(nxpdev->fw_name, 0, sizeof(nxpdev->fw_name));
/* Allow the downloaded FW to initialize */
msleep(1200);
@@ -693,7 +705,7 @@ static int nxp_request_firmware(struct hci_dev *hdev, const char *fw_name)
if (!strlen(nxpdev->fw_name)) {
snprintf(nxpdev->fw_name, MAX_FW_FILE_NAME_LEN, "%s", fw_name);
- bt_dev_dbg(hdev, "Request Firmware: %s", nxpdev->fw_name);
+ bt_dev_info(hdev, "Request Firmware: %s", nxpdev->fw_name);
err = request_firmware(&nxpdev->fw, nxpdev->fw_name, &hdev->dev);
if (err < 0) {
bt_dev_err(hdev, "Firmware file %s not found", nxpdev->fw_name);
@@ -781,7 +793,7 @@ static int nxp_recv_fw_req_v1(struct hci_dev *hdev, struct sk_buff *skb)
}
if (!len) {
- bt_dev_dbg(hdev, "FW Downloaded Successfully: %zu bytes",
+ bt_dev_info(hdev, "FW Download Complete: %zu bytes",
nxpdev->fw->size);
if (nxp_data->helper_fw_name && !nxpdev->helper_downloaded) {
nxpdev->helper_downloaded = true;
@@ -934,7 +946,7 @@ static int nxp_recv_fw_req_v3(struct hci_dev *hdev, struct sk_buff *skb)
}
if (req->len == 0) {
- bt_dev_dbg(hdev, "FW Downloaded Successfully: %zu bytes",
+ bt_dev_info(hdev, "FW Download Complete: %zu bytes",
nxpdev->fw->size);
clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state);
wake_up_interruptible(&nxpdev->fw_dnld_done_wait_q);
@@ -954,8 +966,9 @@ static int nxp_recv_fw_req_v3(struct hci_dev *hdev, struct sk_buff *skb)
goto free_skb;
}
- serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data + offset -
- nxpdev->fw_v3_offset_correction, len);
+ nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
+ serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
+ nxpdev->fw_dnld_v3_offset, len);
free_skb:
kfree_skb(skb);
@@ -1037,7 +1050,7 @@ static int nxp_setup(struct hci_dev *hdev)
if (err < 0)
return err;
} else {
- bt_dev_dbg(hdev, "FW already running.");
+ bt_dev_info(hdev, "FW already running.");
clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state);
}
@@ -1253,8 +1266,10 @@ static int btnxpuart_close(struct hci_dev *hdev)
ps_wakeup(nxpdev);
serdev_device_close(nxpdev->serdev);
skb_queue_purge(&nxpdev->txq);
- kfree_skb(nxpdev->rx_skb);
- nxpdev->rx_skb = NULL;
+ if (!IS_ERR_OR_NULL(nxpdev->rx_skb)) {
+ kfree_skb(nxpdev->rx_skb);
+ nxpdev->rx_skb = NULL;
+ }
clear_bit(BTNXPUART_SERDEV_OPEN, &nxpdev->tx_state);
return 0;
}
@@ -1269,8 +1284,10 @@ static int btnxpuart_flush(struct hci_dev *hdev)
cancel_work_sync(&nxpdev->tx_work);
- kfree_skb(nxpdev->rx_skb);
- nxpdev->rx_skb = NULL;
+ if (!IS_ERR_OR_NULL(nxpdev->rx_skb)) {
+ kfree_skb(nxpdev->rx_skb);
+ nxpdev->rx_skb = NULL;
+ }
return 0;
}
@@ -1385,16 +1402,22 @@ static void nxp_serdev_remove(struct serdev_device *serdev)
struct btnxpuart_dev *nxpdev = serdev_device_get_drvdata(serdev);
struct hci_dev *hdev = nxpdev->hdev;
- /* Restore FW baudrate to fw_init_baudrate if changed.
- * This will ensure FW baudrate is in sync with
- * driver baudrate in case this driver is re-inserted.
- */
- if (nxpdev->current_baudrate != nxpdev->fw_init_baudrate) {
- nxpdev->new_baudrate = nxpdev->fw_init_baudrate;
- nxp_set_baudrate_cmd(hdev, NULL);
+ if (is_fw_downloading(nxpdev)) {
+ set_bit(BTNXPUART_FW_DOWNLOAD_ABORT, &nxpdev->tx_state);
+ clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state);
+ wake_up_interruptible(&nxpdev->check_boot_sign_wait_q);
+ wake_up_interruptible(&nxpdev->fw_dnld_done_wait_q);
+ } else {
+ /* Restore FW baudrate to fw_init_baudrate if changed.
+ * This will ensure FW baudrate is in sync with
+ * driver baudrate in case this driver is re-inserted.
+ */
+ if (nxpdev->current_baudrate != nxpdev->fw_init_baudrate) {
+ nxpdev->new_baudrate = nxpdev->fw_init_baudrate;
+ nxp_set_baudrate_cmd(hdev, NULL);
+ }
+ ps_cancel_timer(nxpdev);
}
-
- ps_cancel_timer(nxpdev);
hci_unregister_dev(hdev);
hci_free_dev(hdev);
}
--
2.34.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=845335
---Test result---
Test Summary:
CheckPatch PASS 0.69 seconds
GitLint PASS 0.31 seconds
SubjectPrefix PASS 0.12 seconds
BuildKernel PASS 29.72 seconds
CheckAllWarning PASS 33.65 seconds
CheckSparse PASS 39.11 seconds
CheckSmatch FAIL 36.54 seconds
BuildKernel32 PASS 29.43 seconds
TestRunnerSetup PASS 519.51 seconds
TestRunner_l2cap-tester PASS 18.63 seconds
TestRunner_iso-tester PASS 31.85 seconds
TestRunner_bnep-tester PASS 4.66 seconds
TestRunner_mgmt-tester PASS 112.25 seconds
TestRunner_rfcomm-tester PASS 7.18 seconds
TestRunner_sco-tester PASS 14.89 seconds
TestRunner_ioctl-tester PASS 7.62 seconds
TestRunner_mesh-tester PASS 5.72 seconds
TestRunner_smp-tester PASS 6.72 seconds
TestRunner_userchan-tester PASS 4.85 seconds
IncrementalBuild PASS 27.86 seconds
Details
##############################
Test: CheckSmatch - FAIL
Desc: Run smatch tool with source
Output:
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/hci_core.o] Error 139
make[4]: *** Deleting file 'net/bluetooth/hci_core.o'
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bcm203x.o] Error 139
make[4]: *** Deleting file 'drivers/bluetooth/bcm203x.o'
make[4]: *** Waiting for unfinished jobs....
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bpa10x.o] Error 139
make[4]: *** Deleting file 'drivers/bluetooth/bpa10x.o'
make[3]: *** [scripts/Makefile.build:485: drivers/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: drivers] Error 2
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
---
Regards,
Linux Bluetooth