Qualcomm ROME controllers can be registered from the Bluetooth line
discipline and in this case the HCI UART serdev pointer is NULL.
Add the missing sanity check to prevent a NULL-pointer dereference when
wakeup() is called for a non-serdev controller during suspend.
Just return true for now to restore the original behaviour and address
the crash with pre-6.2 kernels, which do not have commit e9b3e5b8c657
("Bluetooth: hci_qca: only assign wakeup with serial port support") that
causes the crash to happen already at setup() time.
Fixes: c1a74160eaf1 ("Bluetooth: hci_qca: Add device_may_wakeup support")
Cc: [email protected] # 5.13
Signed-off-by: Johan Hovold <[email protected]>
---
drivers/bluetooth/hci_qca.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 92fa20f5ac7d..94c85f4fbf3b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1672,6 +1672,9 @@ static bool qca_wakeup(struct hci_dev *hdev)
struct hci_uart *hu = hci_get_drvdata(hdev);
bool wakeup;
+ if (!hu->serdev)
+ return true;
+
/* BT SoC attached through the serial bus is handled by the serdev driver.
* So we need to use the device handle of the serdev driver to get the
* status of device may wakeup.
--
2.43.2
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=846689
---Test result---
Test Summary:
CheckPatch PASS 1.25 seconds
GitLint PASS 0.55 seconds
SubjectPrefix PASS 0.20 seconds
BuildKernel PASS 30.52 seconds
CheckAllWarning PASS 33.41 seconds
CheckSparse PASS 39.05 seconds
CheckSmatch FAIL 35.60 seconds
BuildKernel32 PASS 29.92 seconds
TestRunnerSetup PASS 532.50 seconds
TestRunner_l2cap-tester PASS 18.42 seconds
TestRunner_iso-tester FAIL 31.55 seconds
TestRunner_bnep-tester PASS 4.68 seconds
TestRunner_mgmt-tester FAIL 112.15 seconds
TestRunner_rfcomm-tester PASS 7.39 seconds
TestRunner_sco-tester PASS 15.04 seconds
TestRunner_ioctl-tester PASS 7.75 seconds
TestRunner_mesh-tester PASS 5.84 seconds
TestRunner_smp-tester PASS 6.80 seconds
TestRunner_userchan-tester PASS 4.99 seconds
IncrementalBuild PASS 33.50 seconds
Details
##############################
Test: CheckSmatch - FAIL
Desc: Run smatch tool with source
Output:
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/hci_core.o] Error 139
make[4]: *** Deleting file 'net/bluetooth/hci_core.o'
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bcm203x.o] Error 139
make[4]: *** Deleting file 'drivers/bluetooth/bcm203x.o'
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:485: drivers/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: drivers] Error 2
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
Total: 122, Passed: 121 (99.2%), Failed: 1, Not Run: 0
Failed Test Cases
ISO Connect2 Suspend - Success Failed 4.245 seconds
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 492, Passed: 489 (99.4%), Failed: 1, Not Run: 2
Failed Test Cases
LL Privacy - Add Device 7 (AL is full) Failed 0.195 seconds
---
Regards,
Linux Bluetooth