With this patch, gatt can set any value to each local/remote signed
counter. It is need by next patch
---
android/bluetooth.c | 7 ++++---
android/bluetooth.h | 3 ++-
android/gatt.c | 4 ++--
3 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/android/bluetooth.c b/android/bluetooth.c
index 4646a6c..237c221 100644
--- a/android/bluetooth.c
+++ b/android/bluetooth.c
@@ -4153,7 +4153,8 @@ static void store_sign_counter(struct device *dev, enum bt_csrk_type type)
g_key_file_free(key_file);
}
-void bt_update_sign_counter(const bdaddr_t *addr, enum bt_csrk_type type)
+void bt_update_sign_counter(const bdaddr_t *addr, enum bt_csrk_type type,
+ uint32_t val)
{
struct device *dev;
@@ -4162,9 +4163,9 @@ void bt_update_sign_counter(const bdaddr_t *addr, enum bt_csrk_type type)
return;
if (type == LOCAL_CSRK)
- dev->local_sign_cnt++;
+ dev->local_sign_cnt = val;
else
- dev->remote_sign_cnt++;
+ dev->remote_sign_cnt = val;
store_sign_counter(dev, type);
}
diff --git a/android/bluetooth.h b/android/bluetooth.h
index fffb3cc..8970559 100644
--- a/android/bluetooth.h
+++ b/android/bluetooth.h
@@ -72,7 +72,8 @@ bool bt_read_device_rssi(const bdaddr_t *addr, bt_read_device_rssi_done cb,
bool bt_get_csrk(const bdaddr_t *addr, enum bt_csrk_type type,
uint8_t key[16], uint32_t *sign_cnt);
-void bt_update_sign_counter(const bdaddr_t *addr, enum bt_csrk_type type);
+void bt_update_sign_counter(const bdaddr_t *addr, enum bt_csrk_type type,
+ uint32_t val);
void bt_store_gatt_ccc(const bdaddr_t *addr, uint16_t value);
diff --git a/android/gatt.c b/android/gatt.c
index 83d199f..e06ad1f 100644
--- a/android/gatt.c
+++ b/android/gatt.c
@@ -3168,7 +3168,7 @@ static guint signed_write_cmd(struct gatt_device *dev, uint16_t handle,
return 0;
}
- bt_update_sign_counter(&dev->bdaddr, LOCAL_CSRK);
+ bt_update_sign_counter(&dev->bdaddr, LOCAL_CSRK, sign_cnt++);
return res;
}
@@ -5940,7 +5940,7 @@ static void write_signed_cmd_request(const uint8_t *cmd, uint16_t cmd_len,
return;
}
/* Signature OK, proceed with write */
- bt_update_sign_counter(&dev->bdaddr, REMOTE_CSRK);
+ bt_update_sign_counter(&dev->bdaddr, REMOTE_CSRK, sign_cnt++);
gatt_db_write(gatt_db, handle, 0, value, vlen, cmd[0],
&dev->bdaddr);
}
--
1.8.4
According to BT spec 4.1, Part H, 2.4.5 Signing Algorithm, sign
counter shall increment on each message however there is not specific
requirement that it should increment by 1. In fact in case of lost
package we would unsync with remote and would be no able to recover
in other way then re-pair.
This patch reject write sign commands if remote sign counter is less
or equal to previous one.
---
android/gatt.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/android/gatt.c b/android/gatt.c
index e06ad1f..8127fc1 100644
--- a/android/gatt.c
+++ b/android/gatt.c
@@ -5921,16 +5921,16 @@ static void write_signed_cmd_request(const uint8_t *cmd, uint16_t cmd_len,
uint8_t t[ATT_SIGNATURE_LEN];
uint32_t r_sign_cnt = get_le32(s);
- if (r_sign_cnt != sign_cnt) {
- error("gatt: sign_cnt does not match (%d!=%d)",
- sign_cnt, r_sign_cnt);
+ if (r_sign_cnt <= sign_cnt) {
+ error("gatt: Invalid sign_cnt (%d<=%d)?",
+ r_sign_cnt, sign_cnt);
return;
}
/* Generate signature and verify it */
if (!bt_crypto_sign_att(crypto, csrk, cmd,
cmd_len - ATT_SIGNATURE_LEN,
- sign_cnt, t)) {
+ r_sign_cnt, t)) {
error("gatt: Error when generating att signature");
return;
}
@@ -5940,7 +5940,7 @@ static void write_signed_cmd_request(const uint8_t *cmd, uint16_t cmd_len,
return;
}
/* Signature OK, proceed with write */
- bt_update_sign_counter(&dev->bdaddr, REMOTE_CSRK, sign_cnt++);
+ bt_update_sign_counter(&dev->bdaddr, REMOTE_CSRK, r_sign_cnt);
gatt_db_write(gatt_db, handle, 0, value, vlen, cmd[0],
&dev->bdaddr);
}
--
1.8.4
Hi Łukasz,
On Monday 22 of September 2014 12:54:06 Lukasz Rymanowski wrote:
> With this patch, gatt can set any value to each local/remote signed
> counter. It is need by next patch
> ---
> android/bluetooth.c | 7 ++++---
> android/bluetooth.h | 3 ++-
> android/gatt.c | 4 ++--
> 3 files changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/android/bluetooth.c b/android/bluetooth.c
> index 4646a6c..237c221 100644
> --- a/android/bluetooth.c
> +++ b/android/bluetooth.c
> @@ -4153,7 +4153,8 @@ static void store_sign_counter(struct device *dev, enum bt_csrk_type type)
> g_key_file_free(key_file);
> }
>
> -void bt_update_sign_counter(const bdaddr_t *addr, enum bt_csrk_type type)
> +void bt_update_sign_counter(const bdaddr_t *addr, enum bt_csrk_type type,
> + uint32_t val)
> {
> struct device *dev;
>
> @@ -4162,9 +4163,9 @@ void bt_update_sign_counter(const bdaddr_t *addr, enum bt_csrk_type type)
> return;
>
> if (type == LOCAL_CSRK)
> - dev->local_sign_cnt++;
> + dev->local_sign_cnt = val;
> else
> - dev->remote_sign_cnt++;
> + dev->remote_sign_cnt = val;
>
> store_sign_counter(dev, type);
> }
> diff --git a/android/bluetooth.h b/android/bluetooth.h
> index fffb3cc..8970559 100644
> --- a/android/bluetooth.h
> +++ b/android/bluetooth.h
> @@ -72,7 +72,8 @@ bool bt_read_device_rssi(const bdaddr_t *addr, bt_read_device_rssi_done cb,
> bool bt_get_csrk(const bdaddr_t *addr, enum bt_csrk_type type,
> uint8_t key[16], uint32_t *sign_cnt);
>
> -void bt_update_sign_counter(const bdaddr_t *addr, enum bt_csrk_type type);
> +void bt_update_sign_counter(const bdaddr_t *addr, enum bt_csrk_type type,
> + uint32_t val);
>
> void bt_store_gatt_ccc(const bdaddr_t *addr, uint16_t value);
>
> diff --git a/android/gatt.c b/android/gatt.c
> index 83d199f..e06ad1f 100644
> --- a/android/gatt.c
> +++ b/android/gatt.c
> @@ -3168,7 +3168,7 @@ static guint signed_write_cmd(struct gatt_device *dev, uint16_t handle,
> return 0;
> }
>
> - bt_update_sign_counter(&dev->bdaddr, LOCAL_CSRK);
> + bt_update_sign_counter(&dev->bdaddr, LOCAL_CSRK, sign_cnt++);
>
> return res;
> }
> @@ -5940,7 +5940,7 @@ static void write_signed_cmd_request(const uint8_t *cmd, uint16_t cmd_len,
> return;
> }
> /* Signature OK, proceed with write */
> - bt_update_sign_counter(&dev->bdaddr, REMOTE_CSRK);
> + bt_update_sign_counter(&dev->bdaddr, REMOTE_CSRK, sign_cnt++);
> gatt_db_write(gatt_db, handle, 0, value, vlen, cmd[0],
> &dev->bdaddr);
> }
>
Although this was RFC I've applied it since otherwise we would have to re-pair
the device if just single command was lost. Thanks.
--
Best regards,
Szymon Janc