The GPD Pocket is shipping with a BCM2045 USB HCI with its vend:prod
ids set to 0000:0000 and also has its interface class set to 255 (Vendor
Specific Class).
Which, well sucks. Luckily it does advertise usable manufacturer and
product strings, so this commit adds 0000:0000 to the usb_device_id
table, with a special flag of BTUSB_BCM2045_0000_0000, if this flag
is set btusb_probe will check the strings and if they don't match
return -ENODEV.
This is not pretty, but it fixes bluetooth not working under Linux.
Reported-and-tested-by: Christopher Williamson <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
---
drivers/bluetooth/btusb.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 7fa373b428f8..9c3201c0525d 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -66,6 +66,7 @@ static struct usb_driver btusb_driver;
#define BTUSB_BCM2045 0x40000
#define BTUSB_IFNUM_2 0x80000
#define BTUSB_CW6622 0x100000
+#define BTUSB_BCM2045_0000_0000 0x200000
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
@@ -124,6 +125,10 @@ static const struct usb_device_id btusb_table[] = {
/* Canyon CN-BTU1 with HID interfaces */
{ USB_DEVICE(0x0c10, 0x0000) },
+ /* Broadcom BCM2045 with the prod:vend ids not filled GRRR */
+ { USB_DEVICE(0x0000, 0x0000),
+ .driver_info = BTUSB_BCM2045 | BTUSB_BCM2045_0000_0000 },
+
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x413c, 0x8197) },
@@ -2887,6 +2892,16 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info == BTUSB_IGNORE)
return -ENODEV;
+ if (id->driver_info & BTUSB_BCM2045_0000_0000) {
+ struct usb_device *udev = interface_to_usbdev(intf);
+
+ /* Device with prod:vend id set to 0000:0000, check strings */
+ if (!udev->manufacturer || !udev->product ||
+ strcmp(udev->manufacturer, "Broadcom Corp") != 0 ||
+ strcmp(udev->product, "BCM2045A0") != 0)
+ return -ENODEV;
+ }
+
if (id->driver_info & BTUSB_ATH3012) {
struct usb_device *udev = interface_to_usbdev(intf);
--
2.13.0
Hi,
On 07-07-17 13:30, Marcel Holtmann wrote:
> Hi Hans,
>
>> The GPD Pocket is shipping with a BCM2045 USB HCI with its vend:prod
>> ids set to 0000:0000 and also has its interface class set to 255 (Vendor
>> Specific Class).
>>
>> Which, well sucks. Luckily it does advertise usable manufacturer and
>> product strings, so this commit adds 0000:0000 to the usb_device_id
>> table, with a special flag of BTUSB_BCM2045_0000_0000, if this flag
>> is set btusb_probe will check the strings and if they don't match
>> return -ENODEV.
>>
>> This is not pretty, but it fixes bluetooth not working under Linux.
>>
>> Reported-and-tested-by: Christopher Williamson <[email protected]>
>> Signed-off-by: Hans de Goede <[email protected]>
>> ---
>> drivers/bluetooth/btusb.c | 15 +++++++++++++++
>> 1 file changed, 15 insertions(+)
>>
>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> index 7fa373b428f8..9c3201c0525d 100644
>> --- a/drivers/bluetooth/btusb.c
>> +++ b/drivers/bluetooth/btusb.c
>> @@ -66,6 +66,7 @@ static struct usb_driver btusb_driver;
>> #define BTUSB_BCM2045 0x40000
>> #define BTUSB_IFNUM_2 0x80000
>> #define BTUSB_CW6622 0x100000
>> +#define BTUSB_BCM2045_0000_0000 0x200000
>>
>> static const struct usb_device_id btusb_table[] = {
>> /* Generic Bluetooth USB device */
>> @@ -124,6 +125,10 @@ static const struct usb_device_id btusb_table[] = {
>> /* Canyon CN-BTU1 with HID interfaces */
>> { USB_DEVICE(0x0c10, 0x0000) },
>>
>> + /* Broadcom BCM2045 with the prod:vend ids not filled GRRR */
>> + { USB_DEVICE(0x0000, 0x0000),
>> + .driver_info = BTUSB_BCM2045 | BTUSB_BCM2045_0000_0000 },
>> +
>> /* Broadcom BCM20702A0 */
>> { USB_DEVICE(0x413c, 0x8197) },
>>
>> @@ -2887,6 +2892,16 @@ static int btusb_probe(struct usb_interface *intf,
>> if (id->driver_info == BTUSB_IGNORE)
>> return -ENODEV;
>>
>> + if (id->driver_info & BTUSB_BCM2045_0000_0000) {
>> + struct usb_device *udev = interface_to_usbdev(intf);
>> +
>> + /* Device with prod:vend id set to 0000:0000, check strings */
>> + if (!udev->manufacturer || !udev->product ||
>> + strcmp(udev->manufacturer, "Broadcom Corp") != 0 ||
>> + strcmp(udev->product, "BCM2045A0") != 0)
>> + return -ENODEV;
>> + }
>> +
>
> so I reworked this to make it less ugly and be more restrictive in checking the matching details.
Ok, thank you.
> What I need is actually a “btmon -w trace.log” from the initialization of this device so that I can make sure that the patchram support does work here.
Ok, note I do not own a device with this HCI, I've added
Christopher (the reporter who does have a device) to the Cc
again.
Christopher, can you collect btmon -w trace.log for this
device. I guess you need to do rmmod + modprobe btusb
while btmon is running to get the initialization trace.
Regards,
Hans
Hi Hans,
> The GPD Pocket is shipping with a BCM2045 USB HCI with its vend:prod
> ids set to 0000:0000 and also has its interface class set to 255 (Vendor
> Specific Class).
>
> Which, well sucks. Luckily it does advertise usable manufacturer and
> product strings, so this commit adds 0000:0000 to the usb_device_id
> table, with a special flag of BTUSB_BCM2045_0000_0000, if this flag
> is set btusb_probe will check the strings and if they don't match
> return -ENODEV.
>
> This is not pretty, but it fixes bluetooth not working under Linux.
>
> Reported-and-tested-by: Christopher Williamson <[email protected]>
> Signed-off-by: Hans de Goede <[email protected]>
> ---
> drivers/bluetooth/btusb.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 7fa373b428f8..9c3201c0525d 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -66,6 +66,7 @@ static struct usb_driver btusb_driver;
> #define BTUSB_BCM2045 0x40000
> #define BTUSB_IFNUM_2 0x80000
> #define BTUSB_CW6622 0x100000
> +#define BTUSB_BCM2045_0000_0000 0x200000
>
> static const struct usb_device_id btusb_table[] = {
> /* Generic Bluetooth USB device */
> @@ -124,6 +125,10 @@ static const struct usb_device_id btusb_table[] = {
> /* Canyon CN-BTU1 with HID interfaces */
> { USB_DEVICE(0x0c10, 0x0000) },
>
> + /* Broadcom BCM2045 with the prod:vend ids not filled GRRR */
> + { USB_DEVICE(0x0000, 0x0000),
> + .driver_info = BTUSB_BCM2045 | BTUSB_BCM2045_0000_0000 },
> +
> /* Broadcom BCM20702A0 */
> { USB_DEVICE(0x413c, 0x8197) },
>
> @@ -2887,6 +2892,16 @@ static int btusb_probe(struct usb_interface *intf,
> if (id->driver_info == BTUSB_IGNORE)
> return -ENODEV;
>
> + if (id->driver_info & BTUSB_BCM2045_0000_0000) {
> + struct usb_device *udev = interface_to_usbdev(intf);
> +
> + /* Device with prod:vend id set to 0000:0000, check strings */
> + if (!udev->manufacturer || !udev->product ||
> + strcmp(udev->manufacturer, "Broadcom Corp") != 0 ||
> + strcmp(udev->product, "BCM2045A0") != 0)
> + return -ENODEV;
> + }
> +
so I reworked this to make it less ugly and be more restrictive in checking the matching details.
What I need is actually a “btmon -w trace.log” from the initialization of this device so that I can make sure that the patchram support does work here.
Regards
Marcel
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 7
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 4.12
S: Manufacturer=Linux 4.12.0-custom xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=258a ProdID=0111 Rev= 1.00
S: Manufacturer=SINO WEALTH
S: Product=Gaming Keyboard
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=8ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=8ms
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 1.12
S: Manufacturer=Broadcom Corp
S: Product=BCM2045A0
S: SerialNumber=AC83F30677CB
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev= 4.12
S: Manufacturer=Linux 4.12.0-custom xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
On Thu, Jul 6, 2017 at 12:43 PM, Hans de Goede <[email protected]> wrote:
> Hi all,
>
> Christopher, can you do: "sudo cat /sys/kernel/debug/usb/devices"
> and copy and paste the contents in a reply to this mail
> (using reply-to-all) ?
>
> On 06-07-17 17:22, Marcel Holtmann wrote:
>
>> Hi Hans,
>>
>> The GPD Pocket is shipping with a BCM2045 USB HCI with its vend:prod
>>> ids set to 0000:0000 and also has its interface class set to 255 (Vendor
>>> Specific Class).
>>>
>>> Which, well sucks. Luckily it does advertise usable manufacturer and
>>> product strings, so this commit adds 0000:0000 to the usb_device_id
>>> table, with a special flag of BTUSB_BCM2045_0000_0000, if this flag
>>> is set btusb_probe will check the strings and if they don't match
>>> return -ENODEV.
>>>
>>> This is not pretty, but it fixes bluetooth not working under Linux.
>>>
>>
>> can you send around /sys/kernel/debug/usb/devices for this device.
>>
>
> As you can see I've just asked the reported to provide this :)
>
> I already have lsusb -v output for the btusb device:
>
> Bus 001 Device 003: ID 0000:0000
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 255 Vendor Specific Class
> bDeviceSubClass 1
> bDeviceProtocol 1
> bMaxPacketSize0 64
> idVendor 0x0000
> idProduct 0x0000
> bcdDevice 1.12
> iManufacturer 1 Broadcom Corp
> iProduct 2 BCM2045A0
> iSerial 3 AC83F30677CB
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 218
> bNumInterfaces 4
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 100mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 1
> bInterfaceProtocol 1
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0010 1x 16 bytes
> bInterval 1
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 EP 2 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 1
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 1
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 1
> bInterfaceProtocol 1
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 1
> Transfer Type Isochronous
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0000 1x 0 bytes
> bInterval 1
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1
> Transfer Type Isochronous
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0000 1x 0 bytes
> bInterval 1
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 1
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 1
> bInterfaceProtocol 1
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 1
> Transfer Type Isochronous
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0009 1x 9 bytes
> bInterval 1
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1
> Transfer Type Isochronous
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0009 1x 9 bytes
> bInterval 1
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 2
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 1
> bInterfaceProtocol 1
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 1
> Transfer Type Isochronous
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0011 1x 17 bytes
> bInterval 1
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1
> Transfer Type Isochronous
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0011 1x 17 bytes
> bInterval 1
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 3
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 1
> bInterfaceProtocol 1
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 1
> Transfer Type Isochronous
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0019 1x 25 bytes
> bInterval 1
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1
> Transfer Type Isochronous
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0019 1x 25 bytes
> bInterval 1
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 4
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 1
> bInterfaceProtocol 1
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 1
> Transfer Type Isochronous
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0021 1x 33 bytes
> bInterval 1
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1
> Transfer Type Isochronous
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0021 1x 33 bytes
> bInterval 1
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 5
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 1
> bInterfaceProtocol 1
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 1
> Transfer Type Isochronous
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0031 1x 49 bytes
> bInterval 1
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1
> Transfer Type Isochronous
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0031 1x 49 bytes
> bInterval 1
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 2
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0020 1x 32 bytes
> bInterval 1
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x04 EP 4 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0020 1x 32 bytes
> bInterval 1
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 3
> bAlternateSetting 0
> bNumEndpoints 0
> bInterfaceClass 254 Application Specific Interface
> bInterfaceSubClass 1 Device Firmware Update
> bInterfaceProtocol 1
> iInterface 0
> Device Firmware Upgrade Interface Descriptor:
> bLength 9
> bDescriptorType 33
> bmAttributes 5
> Will Not Detach
> Manifestation Tolerant
> Upload Unsupported
> Download Supported
> wDetachTimeout 5000 milliseconds
> wTransferSize 64 bytes
> bcdDFUVersion 1.10
> Device Status: 0x0000
> (Bus Powered)
>
> Regards,
>
> Hans
>
Hi all,
Christopher, can you do: "sudo cat /sys/kernel/debug/usb/devices"
and copy and paste the contents in a reply to this mail
(using reply-to-all) ?
On 06-07-17 17:22, Marcel Holtmann wrote:
> Hi Hans,
>
>> The GPD Pocket is shipping with a BCM2045 USB HCI with its vend:prod
>> ids set to 0000:0000 and also has its interface class set to 255 (Vendor
>> Specific Class).
>>
>> Which, well sucks. Luckily it does advertise usable manufacturer and
>> product strings, so this commit adds 0000:0000 to the usb_device_id
>> table, with a special flag of BTUSB_BCM2045_0000_0000, if this flag
>> is set btusb_probe will check the strings and if they don't match
>> return -ENODEV.
>>
>> This is not pretty, but it fixes bluetooth not working under Linux.
>
> can you send around /sys/kernel/debug/usb/devices for this device.
As you can see I've just asked the reported to provide this :)
I already have lsusb -v output for the btusb device:
Bus 001 Device 003: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 1
bDeviceProtocol 1
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 1.12
iManufacturer 1 Broadcom Corp
iProduct 2 BCM2045A0
iSerial 3 AC83F30677CB
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 218
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 1 Device Firmware Update
bInterfaceProtocol 1
iInterface 0
Device Firmware Upgrade Interface Descriptor:
bLength 9
bDescriptorType 33
bmAttributes 5
Will Not Detach
Manifestation Tolerant
Upload Unsupported
Download Supported
wDetachTimeout 5000 milliseconds
wTransferSize 64 bytes
bcdDFUVersion 1.10
Device Status: 0x0000
(Bus Powered)
Regards,
Hans
Hi Hans,
> The GPD Pocket is shipping with a BCM2045 USB HCI with its vend:prod
> ids set to 0000:0000 and also has its interface class set to 255 (Vendor
> Specific Class).
>
> Which, well sucks. Luckily it does advertise usable manufacturer and
> product strings, so this commit adds 0000:0000 to the usb_device_id
> table, with a special flag of BTUSB_BCM2045_0000_0000, if this flag
> is set btusb_probe will check the strings and if they don't match
> return -ENODEV.
>
> This is not pretty, but it fixes bluetooth not working under Linux.
can you send around /sys/kernel/debug/usb/devices for this device.
Regards
Marcel