This adds a new BT_AMP socket option to control the use of AMP channels.
It is for use with the SOL_BLUETOOTH option level on L2CAP sockets.
Available option values are defined as:
BT_AMP_REQUIRE_BR_EDR
* Default
* AMP controllers cannot be used
* Channel move requests from the remote device are denied
* If the L2CAP channel is currently using AMP, move the channel to
BR/EDR
BT_AMP_PREFER_AMP
* Allow use of AMP controllers
* If the L2CAP channel is currently on BR/EDR and AMP controller
resources are available, initiate a channel move to AMP
* Channel move requests from the remote device are allowed
* If the L2CAP socket has not been connected yet, try to create
and configure the channel directly on an AMP controller rather
than BR/EDR
BT_AMP_PREFER_BR_EDR
* Allow use of AMP controllers
* If the L2CAP channel is currently on AMP, move it to BR/EDR
* Channel move requests from the remote device are allowed
Signed-off-by: Mat Martineau <[email protected]>
---
include/net/bluetooth/bluetooth.h | 28 ++++++++++++++++++++++++++++
1 files changed, 28 insertions(+), 0 deletions(-)
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 27a902d..d2c62dc 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -64,6 +64,34 @@ struct bt_security {
#define BT_DEFER_SETUP 7
+
+#define BT_AMP_POLICY 8
+
+/* Require BR/EDR (default policy)
+ * AMP controllers cannot be used
+ * Channel move requests from the remote device are denied
+ * If the L2CAP channel is currently using AMP, move the channel to BR/EDR
+ */
+#define BT_AMP_POLICY_REQUIRE_BR_EDR 0
+
+/* Prefer AMP
+ * Allow use of AMP controllers
+ * If the L2CAP channel is currently on BR/EDR and AMP controller
+ * resources are available, initiate a channel move to AMP
+ * Channel move requests from the remote device are allowed
+ * If the L2CAP socket has not been connected yet, try to create
+ * and configure the channel directly on an AMP controller rather
+ * than BR/EDR
+ */
+#define BT_AMP_POLICY_PREFER_AMP 1
+
+/* Prefer BR/EDR
+ * Allow use of AMP controllers
+ * If the L2CAP channel is currently on AMP, move it to BR/EDR
+ * Channel move requests from the remote device are allowed
+ */
+#define BT_AMP_POLICY_PREFER_BR_EDR 2
+
#define BT_INFO(fmt, arg...) printk(KERN_INFO "Bluetooth: " fmt "\n" , ## arg)
#define BT_ERR(fmt, arg...) printk(KERN_ERR "%s: " fmt "\n" , __func__ , ## arg)
#define BT_DBG(fmt, arg...) pr_debug("%s: " fmt "\n" , __func__ , ## arg)
--
1.7.1
Hi Mat,
* Mat Martineau <[email protected]> [2010-09-08 10:16:33 -0700]:
> This adds a new BT_AMP socket option to control the use of AMP channels.
> It is for use with the SOL_BLUETOOTH option level on L2CAP sockets.
>
> Available option values are defined as:
>
> BT_AMP_REQUIRE_BR_EDR
> * Default
> * AMP controllers cannot be used
> * Channel move requests from the remote device are denied
> * If the L2CAP channel is currently using AMP, move the channel to
> BR/EDR
>
> BT_AMP_PREFER_AMP
> * Allow use of AMP controllers
> * If the L2CAP channel is currently on BR/EDR and AMP controller
> resources are available, initiate a channel move to AMP
> * Channel move requests from the remote device are allowed
> * If the L2CAP socket has not been connected yet, try to create
> and configure the channel directly on an AMP controller rather
> than BR/EDR
>
> BT_AMP_PREFER_BR_EDR
> * Allow use of AMP controllers
> * If the L2CAP channel is currently on AMP, move it to BR/EDR
> * Channel move requests from the remote device are allowed
>
> Signed-off-by: Mat Martineau <[email protected]>
> ---
> include/net/bluetooth/bluetooth.h | 28 ++++++++++++++++++++++++++++
> 1 files changed, 28 insertions(+), 0 deletions(-)
Patch has been applied to my bluetooth-next-2.6 tree.
--
Gustavo F. Padovan
ProFUSION embedded systems - http://profusion.mobi
On 9/8/2010 12:16 PM, Mat Martineau wrote:
> This adds a new BT_AMP socket option to control the use of AMP channels.
> It is for use with the SOL_BLUETOOTH option level on L2CAP sockets.
>
> Available option values are defined as:
>
> BT_AMP_REQUIRE_BR_EDR
> * Default
> * AMP controllers cannot be used
> * Channel move requests from the remote device are denied
> * If the L2CAP channel is currently using AMP, move the channel to
> BR/EDR
>
> BT_AMP_PREFER_AMP
> * Allow use of AMP controllers
> * If the L2CAP channel is currently on BR/EDR and AMP controller
> resources are available, initiate a channel move to AMP
> * Channel move requests from the remote device are allowed
> * If the L2CAP socket has not been connected yet, try to create
> and configure the channel directly on an AMP controller rather
> than BR/EDR
>
> BT_AMP_PREFER_BR_EDR
> * Allow use of AMP controllers
> * If the L2CAP channel is currently on AMP, move it to BR/EDR
> * Channel move requests from the remote device are allowed
>
> Signed-off-by: Mat Martineau <[email protected]>
> ---
> include/net/bluetooth/bluetooth.h | 28 ++++++++++++++++++++++++++++
> 1 files changed, 28 insertions(+), 0 deletions(-)
>
> diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
> index 27a902d..d2c62dc 100644
> --- a/include/net/bluetooth/bluetooth.h
> +++ b/include/net/bluetooth/bluetooth.h
> @@ -64,6 +64,34 @@ struct bt_security {
>
> #define BT_DEFER_SETUP 7
>
> +
> +#define BT_AMP_POLICY 8
> +
> +/* Require BR/EDR (default policy)
> + * AMP controllers cannot be used
> + * Channel move requests from the remote device are denied
> + * If the L2CAP channel is currently using AMP, move the channel to BR/EDR
> + */
> +#define BT_AMP_POLICY_REQUIRE_BR_EDR 0
> +
> +/* Prefer AMP
> + * Allow use of AMP controllers
> + * If the L2CAP channel is currently on BR/EDR and AMP controller
> + * resources are available, initiate a channel move to AMP
> + * Channel move requests from the remote device are allowed
> + * If the L2CAP socket has not been connected yet, try to create
> + * and configure the channel directly on an AMP controller rather
> + * than BR/EDR
> + */
> +#define BT_AMP_POLICY_PREFER_AMP 1
> +
> +/* Prefer BR/EDR
> + * Allow use of AMP controllers
> + * If the L2CAP channel is currently on AMP, move it to BR/EDR
> + * Channel move requests from the remote device are allowed
> + */
> +#define BT_AMP_POLICY_PREFER_BR_EDR 2
> +
> #define BT_INFO(fmt, arg...) printk(KERN_INFO "Bluetooth: " fmt "\n" , ## arg)
> #define BT_ERR(fmt, arg...) printk(KERN_ERR "%s: " fmt "\n" , __func__ , ## arg)
> #define BT_DBG(fmt, arg...) pr_debug("%s: " fmt "\n" , __func__ , ## arg)
Ping
--
Ron Shaffer
Employee of the Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
Mat Martineau wrote:
> This adds a new BT_AMP socket option to control the use of AMP channels.
> It is for use with the SOL_BLUETOOTH option level on L2CAP sockets.
Looks good.
David
--
David Vrabel, Senior Software Engineer, Drivers
CSR, Churchill House, Cambridge Business Park, Tel: +44 (0)1223 692562
Cowley Road, Cambridge, CB4 0WZ http://www.csr.com/
Member of the CSR plc group of companies. CSR plc registered in England and Wales, registered number 4187346, registered office Churchill House, Cambridge Business Park, Cowley Road, Cambridge, CB4 0WZ, United Kingdom