New API for Sim Access Profile by Waldemar Rymarkiewicz
---
Makefile.am | 3 ++-
doc/sap-api.txt | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 36 insertions(+), 1 deletions(-)
create mode 100644 doc/sap-api.txt
diff --git a/Makefile.am b/Makefile.am
index e6639a7..7975dfa 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -354,7 +354,8 @@ EXTRA_DIST += doc/manager-api.txt \
doc/service-api.txt doc/agent-api.txt doc/attribute-api.txt \
doc/serial-api.txt doc/network-api.txt \
doc/input-api.txt doc/audio-api.txt doc/control-api.txt \
- doc/hfp-api.txt doc/health-api.txt doc/assigned-numbers.txt
+ doc/hfp-api.txt doc/health-api.txt doc/sap-api.txt \
+ doc/assigned-numbers.txt
AM_YFLAGS = -d
diff --git a/doc/sap-api.txt b/doc/sap-api.txt
new file mode 100644
index 0000000..b8b7253
--- /dev/null
+++ b/doc/sap-api.txt
@@ -0,0 +1,34 @@
+BlueZ D-Bus Sim Access Profile API description
+***********************************
+
+Copyright (C) 2010 ST-Ericsson SA
+
+
+Sim Access Profile hierarchy
+============================
+
+Service org.bluez
+Interface org.bluez.SimAccess
+Object path [variable prefix]/{hci0,hci1,...}
+
+Methods void Disconnect()
+
+ Disconnects SAP client from the server.
+
+ Possible errors: org.bluez.Error.Failed
+
+ dict GetProperties()
+
+ Return all properties for the interface. See the
+ properties section for available properties.
+
+ Possible Errors: org.bluez.Error.Failed
+
+Signals PropertyChanged(string name, variant value)
+
+ This signal indicates a changed value of the given
+ property.
+
+Properties boolean Connected [readonly]
+
+ Indicates if SAP client is connected to the server.
--
1.7.1
Hi,
>> What kind of restructuring did you do? I cannot notice any=20
>difference.
>> Is this just a rebase ?
>>=20
>It is a rebase in the end. The only change is that I put=20
>doc/assigned-numbers.txt at the end of EXTRA_DIST as commented=20
>by Gustavo. Feel free to submit it again with your=20
>credentials. I just wanted to see if this very, very small=20
>change prevented your patch from being pushed. As I am very=20
>keen to see a progress on SimAccess.
I see. I guess that's not the blocking point in this case.
@Marcel\Gustavo: Could you find some time to put your comment on this api? =
=20
If it's fine I'll adjust server code to that API.
Thanks,
/Waldek
Am 07.02.2011 14:31, schrieb [email protected]:
> Hi,
>
>> Am 07.02.2011 13:41, schrieb Harald Schmitt:
>>> New API for Sim Access Profile by Waldemar Rymarkiewicz
>>> ---
>>> Makefile.am | 3 ++-
>>> doc/sap-api.txt | 34 ++++++++++++++++++++++++++++++++++
>>> 2 files changed, 36 insertions(+), 1 deletions(-) create
>> mode 100644
>>> doc/sap-api.txt
>>>
>>> diff --git a/Makefile.am b/Makefile.am index e6639a7..7975dfa 100644
>>> --- a/Makefile.am
>>> +++ b/Makefile.am
>>> @@ -354,7 +354,8 @@ EXTRA_DIST += doc/manager-api.txt \
>>> doc/service-api.txt doc/agent-api.txt
>> doc/attribute-api.txt \
>>> doc/serial-api.txt doc/network-api.txt \
>>> doc/input-api.txt doc/audio-api.txt
>> doc/control-api.txt \
>>> - doc/hfp-api.txt doc/health-api.txt
>> doc/assigned-numbers.txt
>>> + doc/hfp-api.txt doc/health-api.txt doc/sap-api.txt \
>>> + doc/assigned-numbers.txt
>>> AM_YFLAGS = -d
>>> diff --git a/doc/sap-api.txt b/doc/sap-api.txt new file mode 100644
>>> index 0000000..b8b7253
>>> --- /dev/null
>>> +++ b/doc/sap-api.txt
>>> @@ -0,0 +1,34 @@
>>> +BlueZ D-Bus Sim Access Profile API description
>>> +***********************************
>>> +
>>> +Copyright (C) 2010 ST-Ericsson SA
>>> +
>>> +
>>> +Sim Access Profile hierarchy
>>> +============================
>>> +
>>> +Service org.bluez
>>> +Interface org.bluez.SimAccess
>>> +Object path [variable prefix]/{hci0,hci1,...}
>>> +
>>> +Methods void Disconnect()
>>> +
>>> + Disconnects SAP client from the server.
>>> +
>>> + Possible errors: org.bluez.Error.Failed
>>> +
>>> + dict GetProperties()
>>> +
>>> + Return all properties for the interface. See the
>>> + properties section for available properties.
>>> +
>>> + Possible Errors: org.bluez.Error.Failed
>>> +
>>> +Signals PropertyChanged(string name, variant value)
>>> +
>>> + This signal indicates a changed value
>> of the given
>>> + property.
>>> +
>>> +Properties boolean Connected [readonly]
>>> +
>>> + Indicates if SAP client is connected to
>> the server.
>>
>> I took the patch from Waldemar Rymarkiewicz (2010-12-02) and
>> did the restructuring in Makefile.am as commented from Gustavo
>> F. Padovan.
>> Are there any other comments?
>
>
> What kind of restructuring did you do? I cannot notice any difference.
> Is this just a rebase ?
>
It is a rebase in the end. The only change is that I put
doc/assigned-numbers.txt at the end of EXTRA_DIST as commented by
Gustavo. Feel free to submit it again with your credentials. I just
wanted to see if this very, very small change prevented your patch from
being pushed. As I am very keen to see a progress on SimAccess.
Best regards,
Harald
Hi,
>Am 07.02.2011 13:41, schrieb Harald Schmitt:
>> New API for Sim Access Profile by Waldemar Rymarkiewicz
>> ---
>> Makefile.am | 3 ++-
>> doc/sap-api.txt | 34 ++++++++++++++++++++++++++++++++++
>> 2 files changed, 36 insertions(+), 1 deletions(-) create
>mode 100644
>> doc/sap-api.txt
>>
>> diff --git a/Makefile.am b/Makefile.am index e6639a7..7975dfa 100644
>> --- a/Makefile.am
>> +++ b/Makefile.am
>> @@ -354,7 +354,8 @@ EXTRA_DIST += doc/manager-api.txt \
>> doc/service-api.txt doc/agent-api.txt
>doc/attribute-api.txt \
>> doc/serial-api.txt doc/network-api.txt \
>> doc/input-api.txt doc/audio-api.txt
>doc/control-api.txt \
>> - doc/hfp-api.txt doc/health-api.txt
>doc/assigned-numbers.txt
>> + doc/hfp-api.txt doc/health-api.txt doc/sap-api.txt \
>> + doc/assigned-numbers.txt
>> AM_YFLAGS = -d
>> diff --git a/doc/sap-api.txt b/doc/sap-api.txt new file mode 100644
>> index 0000000..b8b7253
>> --- /dev/null
>> +++ b/doc/sap-api.txt
>> @@ -0,0 +1,34 @@
>> +BlueZ D-Bus Sim Access Profile API description
>> +***********************************
>> +
>> +Copyright (C) 2010 ST-Ericsson SA
>> +
>> +
>> +Sim Access Profile hierarchy
>> +============================
>> +
>> +Service org.bluez
>> +Interface org.bluez.SimAccess
>> +Object path [variable prefix]/{hci0,hci1,...}
>> +
>> +Methods void Disconnect()
>> +
>> + Disconnects SAP client from the server.
>> +
>> + Possible errors: org.bluez.Error.Failed
>> +
>> + dict GetProperties()
>> +
>> + Return all properties for the interface. See the
>> + properties section for available properties.
>> +
>> + Possible Errors: org.bluez.Error.Failed
>> +
>> +Signals PropertyChanged(string name, variant value)
>> +
>> + This signal indicates a changed value
>of the given
>> + property.
>> +
>> +Properties boolean Connected [readonly]
>> +
>> + Indicates if SAP client is connected to
>the server.
>
>I took the patch from Waldemar Rymarkiewicz (2010-12-02) and
>did the restructuring in Makefile.am as commented from Gustavo
>F. Padovan.
>Are there any other comments?
What kind of restructuring did you do? I cannot notice any difference.
Is this just a rebase ?
Thanks,
/Waldek
Am 07.02.2011 13:41, schrieb Harald Schmitt:
> New API for Sim Access Profile by Waldemar Rymarkiewicz
> ---
> Makefile.am | 3 ++-
> doc/sap-api.txt | 34 ++++++++++++++++++++++++++++++++++
> 2 files changed, 36 insertions(+), 1 deletions(-)
> create mode 100644 doc/sap-api.txt
>
> diff --git a/Makefile.am b/Makefile.am
> index e6639a7..7975dfa 100644
> --- a/Makefile.am
> +++ b/Makefile.am
> @@ -354,7 +354,8 @@ EXTRA_DIST += doc/manager-api.txt \
> doc/service-api.txt doc/agent-api.txt doc/attribute-api.txt \
> doc/serial-api.txt doc/network-api.txt \
> doc/input-api.txt doc/audio-api.txt doc/control-api.txt \
> - doc/hfp-api.txt doc/health-api.txt doc/assigned-numbers.txt
> + doc/hfp-api.txt doc/health-api.txt doc/sap-api.txt \
> + doc/assigned-numbers.txt
> AM_YFLAGS = -d
> diff --git a/doc/sap-api.txt b/doc/sap-api.txt
> new file mode 100644
> index 0000000..b8b7253
> --- /dev/null
> +++ b/doc/sap-api.txt
> @@ -0,0 +1,34 @@
> +BlueZ D-Bus Sim Access Profile API description
> +***********************************
> +
> +Copyright (C) 2010 ST-Ericsson SA
> +
> +
> +Sim Access Profile hierarchy
> +============================
> +
> +Service org.bluez
> +Interface org.bluez.SimAccess
> +Object path [variable prefix]/{hci0,hci1,...}
> +
> +Methods void Disconnect()
> +
> + Disconnects SAP client from the server.
> +
> + Possible errors: org.bluez.Error.Failed
> +
> + dict GetProperties()
> +
> + Return all properties for the interface. See the
> + properties section for available properties.
> +
> + Possible Errors: org.bluez.Error.Failed
> +
> +Signals PropertyChanged(string name, variant value)
> +
> + This signal indicates a changed value of the given
> + property.
> +
> +Properties boolean Connected [readonly]
> +
> + Indicates if SAP client is connected to the server.
I took the patch from Waldemar Rymarkiewicz (2010-12-02) and did the
restructuring in Makefile.am as commented from Gustavo F. Padovan.
Are there any other comments?
Best regards,
Harald