Hello,
it's me again and it's pretty annoying that i don't found any forum user
who can help me, that's why i write to the mailinglist:
Until last week i've had no problems using the pand-command (with
BlueZ-4.98).
But after installed BlueZ-4.99 and the Patch <<Adding SSP debug mode
configuration to hciconfig>> (March, 19th) this command doesn't work.
Two PCs with a bluetooth3.0-Dongle:
PC2 # sdptool add NAP
PC1 # sdptool add NAP
PC2 # pand -s -r NAP -M
PC1 # pand -c <bluetooth-address>
-> no error message, but the connection failed, as seen in
/var/lib/messages (of PC1):
Mar 29 16:12:29 localhost kernel: usb 2-1.1: new full-speed USB device numb
er 4 using ehci_hcd
Mar 29 16:12:29 localhost kernel: usb 2-1.1: New USB device found, idVendor
=0a5c, idProduct=2198
Mar 29 16:12:29 localhost kernel: usb 2-1.1: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
Mar 29 16:12:29 localhost kernel: usb 2-1.1: Product: Broadcom Bluetooth
3.0 Device
Mar 29 16:12:29 localhost kernel: usb 2-1.1: Manufacturer: Broadcom Corp
Mar 29 16:12:29 localhost kernel: usb 2-1.1: SerialNumber: 000272240204
Mar 29 16:12:29 localhost bluetoothd[2208]: HCI dev 0 registered
Mar 29 16:12:29 localhost bluetoothd[2208]: Listening for HCI events on hci0
Mar 29 16:12:29 localhost /etc/init.d/bluetooth[3063]: status: inactive
Mar 29 16:12:29 localhost bluetoothd[2208]: HCI dev 0 up
Mar 29 16:12:29 localhost bluetoothd[2208]: Unable to load keys to
adapter_ops: Function not implemented (38)
Mar 29 16:12:29 localhost bluetoothd[2208]: Adapter /org/bluez/2205/hci0
has been enabled
Mar 29 16:12:49 localhost pand[3095]: Bluetooth PAN daemon version 4.99
Mar 29 16:12:49 localhost pand[3095]: Connecting to 00:02:72:AE:58:73
Mar 29 16:12:50 localhost pand[3095]: Connect to 00:02:72:AE:58:73
failed. Connection refused(111)
Hope somebody can tell me what's the problem.
Regards,
Steffen