2014-11-23 12:15:37

by Dmitry Tunin

[permalink] [raw]
Subject: [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
This bluetooth module requires loading patch and sysconfig by ath3k driver.

/sys/kernel/debug/usb/devices

T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms

Signed-off-by: Dmitry Tunin<[email protected]>

---

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index d85ced2..086240c 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x13d3, 0x3402) },
+ { USB_DEVICE(0x13d3, 0x3408) },
{ USB_DEVICE(0x13d3, 0x3432) },

/* Atheros AR5BBU12 with sflash firmware */
@@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },

/* Atheros AR5BBU22 with sflash firmware */
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..091c813 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },

/* Atheros AR5BBU12 with sflash firmware */

--

Sry for confusing with wrong patches.

Regards,

Dmitry.


2014-11-25 01:40:48

by Marcel Holtmann

[permalink] [raw]
Subject: Re: [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device

Hi Dmitry,

> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
> This bluetooth module requires loading patch and sysconfig by ath3k driver.
>
> CC: [email protected]
> Signed-off-by: Dmitry Tunin <[email protected]>
>
> ---
>
> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
> index d85ced2..086240c 100644
> --- a/drivers/bluetooth/ath3k.c
> +++ b/drivers/bluetooth/ath3k.c
> @@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
> { USB_DEVICE(0x13d3, 0x3375) },
> { USB_DEVICE(0x13d3, 0x3393) },
> { USB_DEVICE(0x13d3, 0x3402) },
> + { USB_DEVICE(0x13d3, 0x3408) },
> { USB_DEVICE(0x13d3, 0x3432) },

please just send a clean v5 that I could apply. I have two v4 in my inbox now.

Regards

Marcel


2014-11-24 16:14:36

by Dmitry Tunin

[permalink] [raw]
Subject: Re: [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
This bluetooth module requires loading patch and sysconfig by ath3k driver.

CC: [email protected]
Signed-off-by: Dmitry Tunin <[email protected]>

---

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index d85ced2..086240c 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x13d3, 0x3402) },
+ { USB_DEVICE(0x13d3, 0x3408) },
{ USB_DEVICE(0x13d3, 0x3432) },

/* Atheros AR5BBU12 with sflash firmware */
@@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },

/* Atheros AR5BBU22 with sflash firmware */
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..091c813 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },

/* Atheros AR5BBU12 with sflash firmware */

--

Canonical people asked to CC: [email protected]

Regards,
Dmitry.

2014-11-23 15:28:14

by Dmitry Tunin

[permalink] [raw]
Subject: Re: [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device

Finally I figured out how to set up the mailer not to spoil everything.

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
This bluetooth module requires loading patch and sysconfig by ath3k driver.

Signed-off-by: Dmitry Tunin <[email protected]>

---

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index d85ced2..086240c 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x13d3, 0x3402) },
+ { USB_DEVICE(0x13d3, 0x3408) },
{ USB_DEVICE(0x13d3, 0x3432) },

/* Atheros AR5BBU12 with sflash firmware */
@@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },

/* Atheros AR5BBU22 with sflash firmware */
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..091c813 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },

/* Atheros AR5BBU12 with sflash firmware */

--

23.11.2014 17:56, Marcel Holtmann wrote:
> Hi Dmitry,
>
>> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
>> This bluetooth module requires loading patch and sysconfig by ath3k driver.
>>
>> /sys/kernel/debug/usb/devices
>>
>> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
>> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>> P: Vendor=13d3 ProdID=3408 Rev= 0.02
>> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
>> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
>> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>>
>> Signed-off-by: Dmitry Tunin<[email protected]>
>
> space between the name and the email address.
>
>>
>> ---
>>
>> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
>> index d85ced2..086240c 100644
>> --- a/drivers/bluetooth/ath3k.c
>> +++ b/drivers/bluetooth/ath3k.c
>> @@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
>> { USB_DEVICE(0x13d3, 0x3375) },
>> { USB_DEVICE(0x13d3, 0x3393) },
>> { USB_DEVICE(0x13d3, 0x3402) },
>> + { USB_DEVICE(0x13d3, 0x3408) },
>> { USB_DEVICE(0x13d3, 0x3432) },
>
> And your mail client messes up spaces vs tabs here.
>
>>
>> /* Atheros AR5BBU12 with sflash firmware */
>> @@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
>> { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
>> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
>> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
>> + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
>> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
>>
>> /* Atheros AR5BBU22 with sflash firmware */
>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> index edfc17b..091c813 100644
>> --- a/drivers/bluetooth/btusb.c
>> +++ b/drivers/bluetooth/btusb.c
>> @@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = {
>> { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
>> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
>> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
>> + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
>> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
>>
>> /* Atheros AR5BBU12 with sflash firmware */
>
> Regards
>
> Marcel
>

2014-11-23 14:56:11

by Marcel Holtmann

[permalink] [raw]
Subject: Re: [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device

Hi Dmitry,

> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
> This bluetooth module requires loading patch and sysconfig by ath3k driver.
>
> /sys/kernel/debug/usb/devices
>
> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3408 Rev= 0.02
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> Signed-off-by: Dmitry Tunin<[email protected]>

space between the name and the email address.

>
> ---
>
> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
> index d85ced2..086240c 100644
> --- a/drivers/bluetooth/ath3k.c
> +++ b/drivers/bluetooth/ath3k.c
> @@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
> { USB_DEVICE(0x13d3, 0x3375) },
> { USB_DEVICE(0x13d3, 0x3393) },
> { USB_DEVICE(0x13d3, 0x3402) },
> + { USB_DEVICE(0x13d3, 0x3408) },
> { USB_DEVICE(0x13d3, 0x3432) },

And your mail client messes up spaces vs tabs here.

>
> /* Atheros AR5BBU12 with sflash firmware */
> @@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
> { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
>
> /* Atheros AR5BBU22 with sflash firmware */
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index edfc17b..091c813 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = {
> { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
>
> /* Atheros AR5BBU12 with sflash firmware */

Regards

Marcel