https://bugzilla.kernel.org/show_bug.cgi?id=109321
Bug ID: 109321
Summary: ASUS T100TA Bluetooth stopped working
Product: Drivers
Version: 2.5
Kernel Version: 4.4-rc4
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Bluetooth
Assignee: [email protected]
Reporter: [email protected]
Regression: No
Hello
since kernel 4.2.3 the bluetooth on ASUS t100TA stopped working
can no longer initialize it using hciattach /dev/ttyS4 bcm43xx command it
always times out it also registers different in dmesg
80860F0A:00: ttyS4 at MMIO 0x9094d000 (irq = 191, base_baud = 2764800) is a
16550A
[ 5.629222] Bluetooth: Core ver 2.21
[ 5.629287] NET: Registered protocol family 31
[ 5.629291] Bluetooth: HCI device and connection manager initialized
[ 5.629299] Bluetooth: HCI socket layer initialized
[ 5.629305] Bluetooth: L2CAP socket layer initialized
[ 5.629318] Bluetooth: SCO socket layer initialized
[ 5.643749] Bluetooth: HCI UART driver ver 2.3
[ 5.643757] Bluetooth: HCI UART protocol H4 registered
[ 5.643760] Bluetooth: HCI UART protocol BCSP registered
[ 5.643763] Bluetooth: HCI UART protocol LL registered
[ 5.643765] Bluetooth: HCI UART protocol ATH3K registered
[ 5.643768] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 5.643853] Bluetooth: HCI UART protocol Intel registered
[ 5.657970] hci_bcm BCM2E39:00: BCM irq: 192
[ 5.658046] Bluetooth: BCM2E39:00: Asus T100TA: Overwriting IRQ polarity to
active low
[ 5.658051] hci_bcm BCM2E39:00: BCM2E39:00 device registered.
[ 5.658224] Bluetooth: HCI UART protocol BCM registered
not sure if this is a bug in the kernel driver or if something was changed
BlueZ and not updated in the bcm driver
also it no longer registers with rfkill which i think was changed
let me know if you need any more information
thanks
--
You are receiving this mail because:
You are the assignee for the bug.
https://bugzilla.kernel.org/show_bug.cgi?id=109321
Brian Loften <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #2 from Brian Loften <[email protected]> ---
(In reply to Johan Hedberg from comment #1)
> There was an answer to this, but you may have missed it since it was only
> sent to the mailing list:
> http://www.spinics.net/lists/linux-bluetooth/msg65800.html
yes this got it working again thank you for the information
i did the btmgmt static-addr and public-addr and cannot get the bluetooth
devices to stay after each boot (mouse, speaker, etc) any ideas how to get the
system to remember bluetooth devices with btattach?
with hciconfig it was hciconfig /dev/ttyS4 bcm43xx 921600 flow bdaddr
XX:XX:XX:XX:XX:XX and the system will remember the devices whcih each boot
the BDADDR keeps changing after boot if i do not set static-addr or public-addr
is this a driver issue or a bluez issue?
thanks again for your help
--
You are receiving this mail because:
You are the assignee for the bug.
https://bugzilla.kernel.org/show_bug.cgi?id=109321
Johan Hedberg <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #1 from Johan Hedberg <[email protected]> ---
There was an answer to this, but you may have missed it since it was only sent
to the mailing list: http://www.spinics.net/lists/linux-bluetooth/msg65800.html
--
You are receiving this mail because:
You are the assignee for the bug.
Hello,
On 14/12/2015 02:36, [email protected] wrote:
> Hello
>
> since kernel 4.2.3 the bluetooth on ASUS t100TA stopped working
>
> can no longer initialize it using hciattach /dev/ttyS4 bcm43xx command it
> always times out it also registers different in dmesg
>
> 80860F0A:00: ttyS4 at MMIO 0x9094d000 (irq = 191, base_baud = 2764800) is a
> 16550A
> [ 5.629222] Bluetooth: Core ver 2.21
> [ 5.629287] NET: Registered protocol family 31
> [ 5.629291] Bluetooth: HCI device and connection manager initialized
> [ 5.629299] Bluetooth: HCI socket layer initialized
> [ 5.629305] Bluetooth: L2CAP socket layer initialized
> [ 5.629318] Bluetooth: SCO socket layer initialized
> [ 5.643749] Bluetooth: HCI UART driver ver 2.3
> [ 5.643757] Bluetooth: HCI UART protocol H4 registered
> [ 5.643760] Bluetooth: HCI UART protocol BCSP registered
> [ 5.643763] Bluetooth: HCI UART protocol LL registered
> [ 5.643765] Bluetooth: HCI UART protocol ATH3K registered
> [ 5.643768] Bluetooth: HCI UART protocol Three-wire (H5) registered
> [ 5.643853] Bluetooth: HCI UART protocol Intel registered
> [ 5.657970] hci_bcm BCM2E39:00: BCM irq: 192
> [ 5.658046] Bluetooth: BCM2E39:00: Asus T100TA: Overwriting IRQ polarity to
> active low
> [ 5.658051] hci_bcm BCM2E39:00: BCM2E39:00 device registered.
> [ 5.658224] Bluetooth: HCI UART protocol BCM registered
>
> not sure if this is a bug in the kernel driver or if something was changed
> BlueZ and not updated in the bcm driver
>
> also it no longer registers with rfkill which i think was changed
Bluetooth BCM chipset is no more managed by rfkill and hciattach.
You should use btattach to register it (BlueZ >= 5.31):
btattach --bredr /dev/ttyS4 -P bcm
then (you should change the device address):
btmgmt public-addr "43:24:b3:01:02:03"
Hope this helps
https://bugzilla.kernel.org/show_bug.cgi?id=109321
--- Comment #4 from jbMacAZ <[email protected]> ---
4.5.0-next-20150321 self-starts at boot, but I have to open device manager to
maintain bluetooth connection, search not needed though. If mouse or keyboard
timeout, it will reconnect automatically. If the T100 times out, I have to
manually search with blueman device manager to reconnect devices. Pairing is
maintained boot to boot and after inactivity timeouts.
--
You are receiving this mail because:
You are the assignee for the bug.
https://bugzilla.kernel.org/show_bug.cgi?id=109321
jbMacAZ <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #3 from jbMacAZ <[email protected]> ---
btattach was working fine in 4.3.x with bluez 5.3.5 and blueman
(Ubuntu15.10-i386, Asus T100-CHI). Starting with kernel 4.4 (and 4.5)
bluetooth no longer self-starts at boot or reconnects after no-activity
timeout. I have to manually search (pairing is still retained) using blueman
device manager to activate bluetooth link. Or stay with EOL 4.3.x
--
You are receiving this mail because:
You are the assignee for the bug.