From: Max Chou <[email protected]>
By this change, it will enable WBS supported on the specific Realtek BT
devices, such as RTL8822C and RTL8852A.
In the future, it's able to maintain what the Realtek devices support WBS
here.
Tested-by: Hilda Wu <[email protected]>
Reviewed-by: Abhishek Pandit-Subedi <[email protected]>
Signed-off-by: Max Chou <[email protected]>
---
change in v3
-remove the null check due to unnecessary
---
drivers/bluetooth/btrtl.c | 29 +++++++++++++++++++++++------
1 file changed, 23 insertions(+), 6 deletions(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 24f03a1f8d57..a21d6abc93c4 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -38,6 +38,19 @@
.hci_ver = (hciv), \
.hci_bus = (bus)
+enum btrtl_chip_id {
+ CHIP_ID_8723A, /* index 0 for RTL8723A*/
+ CHIP_ID_8723B, /* index 1 for RTL8723B*/
+ CHIP_ID_8821A, /* index 2 for RTL8821A*/
+ CHIP_ID_8761A, /* index 3 for RTL8761A*/
+ CHIP_ID_8822B = 8, /* index 8 for RTL8822B */
+ CHIP_ID_8723D, /* index 9 for RTL8723D */
+ CHIP_ID_8821C, /* index 10 for RTL8821C */
+ CHIP_ID_8822C = 13, /* index 13 for RTL8822C */
+ CHIP_ID_8761B, /* index 14 for RTL8761B */
+ CHIP_ID_8852A = 18, /* index 18 for RTL8852A */
+};
+
struct id_table {
__u16 match_flags;
__u16 lmp_subver;
@@ -58,6 +71,7 @@ struct btrtl_device_info {
u8 *cfg_data;
int cfg_len;
bool drop_fw;
+ int project_id;
};
static const struct id_table ic_id_table[] = {
@@ -307,8 +321,10 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
/* Find project_id in table */
for (i = 0; i < ARRAY_SIZE(project_id_to_lmp_subver); i++) {
- if (project_id == project_id_to_lmp_subver[i].id)
+ if (project_id == project_id_to_lmp_subver[i].id) {
+ btrtl_dev->project_id = project_id;
break;
+ }
}
if (i >= ARRAY_SIZE(project_id_to_lmp_subver)) {
@@ -719,18 +735,19 @@ int btrtl_setup_realtek(struct hci_dev *hdev)
*/
set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
- if (!btrtl_dev->ic_info)
- goto done;
-
/* Enable central-peripheral role (able to create new connections with
* an existing connection in slave role).
*/
- switch (btrtl_dev->ic_info->lmp_subver) {
- case RTL_ROM_LMP_8822B:
+ /* Enable WBS supported for the specific Realtek devices. */
+ switch (btrtl_dev->project_id) {
+ case CHIP_ID_8822C:
+ case CHIP_ID_8852A:
set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+ set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
break;
default:
rtl_dev_dbg(hdev, "Central-peripheral role not enabled.");
+ rtl_dev_dbg(hdev, "WBS supported not enabled.");
break;
}
--
2.17.1
Thanks Max. Patch v3 looks good to me.
Reviewed-by: Abhishek Pandit-Subedi <[email protected]>
On Thu, Jan 21, 2021 at 5:59 PM <[email protected]> wrote:
>
> From: Max Chou <[email protected]>
>
> By this change, it will enable WBS supported on the specific Realtek BT
> devices, such as RTL8822C and RTL8852A.
> In the future, it's able to maintain what the Realtek devices support WBS
> here.
>
> Tested-by: Hilda Wu <[email protected]>
> Reviewed-by: Abhishek Pandit-Subedi <[email protected]>
> Signed-off-by: Max Chou <[email protected]>
>
> ---
> change in v3
> -remove the null check due to unnecessary
> ---
> drivers/bluetooth/btrtl.c | 29 +++++++++++++++++++++++------
> 1 file changed, 23 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index 24f03a1f8d57..a21d6abc93c4 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -38,6 +38,19 @@
> .hci_ver = (hciv), \
> .hci_bus = (bus)
>
> +enum btrtl_chip_id {
> + CHIP_ID_8723A, /* index 0 for RTL8723A*/
> + CHIP_ID_8723B, /* index 1 for RTL8723B*/
> + CHIP_ID_8821A, /* index 2 for RTL8821A*/
> + CHIP_ID_8761A, /* index 3 for RTL8761A*/
> + CHIP_ID_8822B = 8, /* index 8 for RTL8822B */
> + CHIP_ID_8723D, /* index 9 for RTL8723D */
> + CHIP_ID_8821C, /* index 10 for RTL8821C */
> + CHIP_ID_8822C = 13, /* index 13 for RTL8822C */
> + CHIP_ID_8761B, /* index 14 for RTL8761B */
> + CHIP_ID_8852A = 18, /* index 18 for RTL8852A */
> +};
> +
> struct id_table {
> __u16 match_flags;
> __u16 lmp_subver;
> @@ -58,6 +71,7 @@ struct btrtl_device_info {
> u8 *cfg_data;
> int cfg_len;
> bool drop_fw;
> + int project_id;
> };
>
> static const struct id_table ic_id_table[] = {
> @@ -307,8 +321,10 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
>
> /* Find project_id in table */
> for (i = 0; i < ARRAY_SIZE(project_id_to_lmp_subver); i++) {
> - if (project_id == project_id_to_lmp_subver[i].id)
> + if (project_id == project_id_to_lmp_subver[i].id) {
> + btrtl_dev->project_id = project_id;
> break;
> + }
> }
>
> if (i >= ARRAY_SIZE(project_id_to_lmp_subver)) {
> @@ -719,18 +735,19 @@ int btrtl_setup_realtek(struct hci_dev *hdev)
> */
> set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
>
> - if (!btrtl_dev->ic_info)
> - goto done;
> -
> /* Enable central-peripheral role (able to create new connections with
> * an existing connection in slave role).
> */
> - switch (btrtl_dev->ic_info->lmp_subver) {
> - case RTL_ROM_LMP_8822B:
> + /* Enable WBS supported for the specific Realtek devices. */
> + switch (btrtl_dev->project_id) {
> + case CHIP_ID_8822C:
> + case CHIP_ID_8852A:
> set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
> + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
> break;
> default:
> rtl_dev_dbg(hdev, "Central-peripheral role not enabled.");
> + rtl_dev_dbg(hdev, "WBS supported not enabled.");
> break;
> }
>
> --
> 2.17.1
>
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=419593
---Test result---
##############################
Test: CheckPatch - PASS
##############################
Test: CheckGitLint - FAIL
workflow: Add workflow files for ci
1: T1 Title exceeds max length (92>72): "Merge cfa5d76f5c40422f050937dfed817b20b249bb59 into 435ccd2045513af89a4eb03a6b7399a021fc0258"
3: B6 Body message is missing
Bluetooth: btrtl: Enable WBS for the specific Realtek devices
1: T1 Title exceeds max length (92>72): "Merge cfa5d76f5c40422f050937dfed817b20b249bb59 into 435ccd2045513af89a4eb03a6b7399a021fc0258"
3: B6 Body message is missing
##############################
Test: CheckBuildK - PASS
##############################
Test: CheckTestRunner: Setup - PASS
##############################
Test: CheckTestRunner: l2cap-tester - PASS
Total: 40, Passed: 34 (85.0%), Failed: 0, Not Run: 6
##############################
Test: CheckTestRunner: bnep-tester - PASS
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: mgmt-tester - PASS
Total: 416, Passed: 402 (96.6%), Failed: 0, Not Run: 14
##############################
Test: CheckTestRunner: rfcomm-tester - PASS
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: sco-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: smp-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: userchan-tester - PASS
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
---
Regards,
Linux Bluetooth