This patch clears any running Adv Monitor DeviceLost timers on bt power
down. It'll also invoke DeviceLost event if the device is already found
and is being tracked for the DeviceLost event.
Verified this by adding a monitor using bluetoothctl and confirming that
the DeviceLost event is getting triggered for already found device in
case of bt power down.
Reviewed-by: [email protected]
Signed-off-by: Manish Mandlik <[email protected]>
---
src/adapter.c | 8 ++++++++
src/adv_monitor.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++
src/adv_monitor.h | 2 ++
3 files changed, 62 insertions(+)
diff --git a/src/adapter.c b/src/adapter.c
index 84bc5a1b0..3af7d1f1a 100644
--- a/src/adapter.c
+++ b/src/adapter.c
@@ -2872,6 +2872,13 @@ static void clear_discoverable(struct btd_adapter *adapter)
set_mode(adapter, MGMT_OP_SET_CONNECTABLE, 0x00);
}
+static void adv_monitor_notify_power_down(struct btd_adapter *adapter)
+{
+ /* Notify Adv Monitor about power down */
+ if (adapter->adv_monitor_manager)
+ btd_adv_monitor_notify_power_down(adapter->adv_monitor_manager);
+}
+
static void property_set_mode(struct btd_adapter *adapter, uint32_t setting,
DBusMessageIter *value,
GDBusPendingPropertySet id)
@@ -2912,6 +2919,7 @@ static void property_set_mode(struct btd_adapter *adapter, uint32_t setting,
len = sizeof(mode);
if (!mode) {
+ adv_monitor_notify_power_down(adapter);
clear_discoverable(adapter);
remove_temporary_devices(adapter);
}
diff --git a/src/adv_monitor.c b/src/adv_monitor.c
index 715ac5904..59f307ae9 100644
--- a/src/adv_monitor.c
+++ b/src/adv_monitor.c
@@ -2011,3 +2011,55 @@ static void adv_monitor_filter_rssi(struct adv_monitor *monitor,
NULL);
}
}
+
+/* Clears running DeviceLost timer for a given device */
+static void clear_device_lost_timer(void *data, void *user_data)
+{
+ struct adv_monitor_device *dev = data;
+ struct adv_monitor *monitor = NULL;
+
+ if (dev->lost_timer) {
+ timeout_remove(dev->lost_timer);
+ dev->lost_timer = 0;
+
+ monitor = dev->monitor;
+
+ DBG("Clearing device lost timer for device %p. "
+ "Calling DeviceLost() on Adv Monitor of "
+ "owner %s at path %s", dev->device,
+ monitor->app->owner, monitor->path);
+
+ g_dbus_proxy_method_call(monitor->proxy, "DeviceLost",
+ report_device_state_setup,
+ NULL, dev->device, NULL);
+ }
+}
+
+/* Clears running DeviceLost timers from each monitor */
+static void clear_lost_timers_from_monitor(void *data, void *user_data)
+{
+ struct adv_monitor *monitor = data;
+
+ queue_foreach(monitor->devices, clear_device_lost_timer, NULL);
+}
+
+/* Clears running DeviceLost timers from each app */
+static void clear_lost_timers_from_app(void *data, void *user_data)
+{
+ struct adv_monitor_app *app = data;
+
+ queue_foreach(app->monitors, clear_lost_timers_from_monitor, NULL);
+}
+
+/* Handles bt power down scenario */
+void btd_adv_monitor_notify_power_down(struct btd_adv_monitor_manager *manager)
+{
+ if (!manager) {
+ error("Unexpected NULL btd_adv_monitor_manager object upon "
+ "power down");
+ return;
+ }
+
+ /* Clear any running DeviceLost timers in case of power down */
+ queue_foreach(manager->apps, clear_lost_timers_from_app, NULL);
+}
diff --git a/src/adv_monitor.h b/src/adv_monitor.h
index 2b4f68abf..20da012d4 100644
--- a/src/adv_monitor.h
+++ b/src/adv_monitor.h
@@ -38,4 +38,6 @@ void btd_adv_monitor_notify_monitors(struct btd_adv_monitor_manager *manager,
void btd_adv_monitor_device_remove(struct btd_adv_monitor_manager *manager,
struct btd_device *device);
+void btd_adv_monitor_notify_power_down(struct btd_adv_monitor_manager *manager);
+
#endif /* __ADV_MONITOR_H */
--
2.33.0.rc2.250.ged5fa647cd-goog
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=537875
---Test result---
Test Summary:
CheckPatch PASS 0.36 seconds
GitLint PASS 0.12 seconds
Prep - Setup ELL PASS 45.94 seconds
Build - Prep PASS 0.17 seconds
Build - Configure PASS 8.13 seconds
Build - Make PASS 197.05 seconds
Make Check PASS 9.18 seconds
Make Distcheck PASS 233.12 seconds
Build w/ext ELL - Configure PASS 8.12 seconds
Build w/ext ELL - Make PASS 185.92 seconds
Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf
##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint
##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL
##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build
##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree
##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree
##############################
Test: Make Check - PASS
Desc: Run 'make check'
##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution
##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration
##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration
---
Regards,
Linux Bluetooth
Hi Manish,
On Thu, Aug 26, 2021 at 8:59 AM Manish Mandlik <[email protected]> wrote:
>
> This patch clears any running Adv Monitor DeviceLost timers on bt power
> down. It'll also invoke DeviceLost event if the device is already found
> and is being tracked for the DeviceLost event.
>
> Verified this by adding a monitor using bluetoothctl and confirming that
> the DeviceLost event is getting triggered for already found device in
> case of bt power down.
>
> Reviewed-by: [email protected]
> Signed-off-by: Manish Mandlik <[email protected]>
We don't use signed-off-by on userspace.
> ---
>
> src/adapter.c | 8 ++++++++
> src/adv_monitor.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++
> src/adv_monitor.h | 2 ++
> 3 files changed, 62 insertions(+)
>
> diff --git a/src/adapter.c b/src/adapter.c
> index 84bc5a1b0..3af7d1f1a 100644
> --- a/src/adapter.c
> +++ b/src/adapter.c
> @@ -2872,6 +2872,13 @@ static void clear_discoverable(struct btd_adapter *adapter)
> set_mode(adapter, MGMT_OP_SET_CONNECTABLE, 0x00);
> }
>
> +static void adv_monitor_notify_power_down(struct btd_adapter *adapter)
> +{
> + /* Notify Adv Monitor about power down */
> + if (adapter->adv_monitor_manager)
> + btd_adv_monitor_notify_power_down(adapter->adv_monitor_manager);
> +}
I guess we could just check for NULL inside btd_adv_monitor*, also I
would rename it to btd_adv_monitor_power_down.
> static void property_set_mode(struct btd_adapter *adapter, uint32_t setting,
> DBusMessageIter *value,
> GDBusPendingPropertySet id)
> @@ -2912,6 +2919,7 @@ static void property_set_mode(struct btd_adapter *adapter, uint32_t setting,
> len = sizeof(mode);
>
> if (!mode) {
> + adv_monitor_notify_power_down(adapter);
> clear_discoverable(adapter);
> remove_temporary_devices(adapter);
> }
> diff --git a/src/adv_monitor.c b/src/adv_monitor.c
> index 715ac5904..59f307ae9 100644
> --- a/src/adv_monitor.c
> +++ b/src/adv_monitor.c
> @@ -2011,3 +2011,55 @@ static void adv_monitor_filter_rssi(struct adv_monitor *monitor,
> NULL);
> }
> }
> +
> +/* Clears running DeviceLost timer for a given device */
> +static void clear_device_lost_timer(void *data, void *user_data)
> +{
> + struct adv_monitor_device *dev = data;
> + struct adv_monitor *monitor = NULL;
> +
> + if (dev->lost_timer) {
> + timeout_remove(dev->lost_timer);
> + dev->lost_timer = 0;
> +
> + monitor = dev->monitor;
> +
> + DBG("Clearing device lost timer for device %p. "
> + "Calling DeviceLost() on Adv Monitor of "
> + "owner %s at path %s", dev->device,
> + monitor->app->owner, monitor->path);
The function name should already give the information about clearing
device lost timer so I'm not why you have to be so verbose about this
action.
> + g_dbus_proxy_method_call(monitor->proxy, "DeviceLost",
> + report_device_state_setup,
> + NULL, dev->device, NULL);
> + }
> +}
> +
> +/* Clears running DeviceLost timers from each monitor */
> +static void clear_lost_timers_from_monitor(void *data, void *user_data)
> +{
> + struct adv_monitor *monitor = data;
> +
> + queue_foreach(monitor->devices, clear_device_lost_timer, NULL);
> +}
> +
> +/* Clears running DeviceLost timers from each app */
> +static void clear_lost_timers_from_app(void *data, void *user_data)
> +{
> + struct adv_monitor_app *app = data;
> +
> + queue_foreach(app->monitors, clear_lost_timers_from_monitor, NULL);
> +}
> +
> +/* Handles bt power down scenario */
> +void btd_adv_monitor_notify_power_down(struct btd_adv_monitor_manager *manager)
> +{
> + if (!manager) {
> + error("Unexpected NULL btd_adv_monitor_manager object upon "
> + "power down");
> + return;
> + }
So you are doing the manager pointer check so it is even more a reason
to not have a wrapper around it.
> + /* Clear any running DeviceLost timers in case of power down */
> + queue_foreach(manager->apps, clear_lost_timers_from_app, NULL);
> +}
> diff --git a/src/adv_monitor.h b/src/adv_monitor.h
> index 2b4f68abf..20da012d4 100644
> --- a/src/adv_monitor.h
> +++ b/src/adv_monitor.h
> @@ -38,4 +38,6 @@ void btd_adv_monitor_notify_monitors(struct btd_adv_monitor_manager *manager,
> void btd_adv_monitor_device_remove(struct btd_adv_monitor_manager *manager,
> struct btd_device *device);
>
> +void btd_adv_monitor_notify_power_down(struct btd_adv_monitor_manager *manager);
> +
> #endif /* __ADV_MONITOR_H */
> --
> 2.33.0.rc2.250.ged5fa647cd-goog
>
--
Luiz Augusto von Dentz