2022-04-20 06:56:46

by tangmeng

[permalink] [raw]
Subject: [PATCH] Bluetooth: btusb: Add one Bluetooth part for the Realtek RTL8852BE

This Realtek device has both wifi and BT components. The latter
reports a USB ID of 0bda:b85b, which is not in the table.

BT device description in /sys/kernel/debug/usb/devices contains the
following entries:

T: Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=b85b Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms

Signed-off-by: Meng Tang <[email protected]>
---
drivers/bluetooth/btusb.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 06a854a2507e..671a8691722e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -422,6 +422,10 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x04ca, 0x4006), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },

+ /* Realtek 8852BE Bluetooth devices */
+ { USB_DEVICE(0x0bda, 0xb85b), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+
/* Realtek Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
.driver_info = BTUSB_REALTEK },
--
2.20.1




2022-04-22 02:42:47

by bluez.test.bot

[permalink] [raw]
Subject: RE: Bluetooth: btusb: Add one Bluetooth part for the Realtek RTL8852BE

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=633626

---Test result---

Test Summary:
CheckPatch PASS 0.87 seconds
GitLint PASS 0.44 seconds
SubjectPrefix PASS 0.31 seconds
BuildKernel PASS 38.50 seconds
BuildKernel32 PASS 34.90 seconds
Incremental Build with patchesPASS 48.09 seconds
TestRunner: Setup PASS 573.67 seconds
TestRunner: l2cap-tester PASS 19.10 seconds
TestRunner: bnep-tester PASS 6.96 seconds
TestRunner: mgmt-tester PASS 121.05 seconds
TestRunner: rfcomm-tester PASS 10.85 seconds
TestRunner: sco-tester PASS 10.50 seconds
TestRunner: smp-tester PASS 10.58 seconds
TestRunner: userchan-tester PASS 7.38 seconds



---
Regards,
Linux Bluetooth