From: Uri Arev <[email protected]>
This fixes the following CHECKs, WARNINGs, and ERRORs reported in
hci_intel.c
Reported by checkpatch.pl:
-----------
hci_intel.c
-----------
WARNING: Prefer using '"%s...", __func__' to using 'intel_setup', this function's name, in a string
+ bt_dev_dbg(hdev, "start intel_setup");
ERROR: code indent should use tabs where possible
+ /* Check for supported iBT hardware variants of this firmware$
ERROR: code indent should use tabs where possible
+ * loading method.$
ERROR: code indent should use tabs where possible
+ *$
ERROR: code indent should use tabs where possible
+ * This check has been put in place to ensure correct forward$
ERROR: code indent should use tabs where possible
+ * compatibility options when newer hardware variants come along.$
ERROR: code indent should use tabs where possible
+ */$
CHECK: No space is necessary after a cast
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
CHECK: No space is necessary after a cast
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
WARNING: Missing a blank line after declarations
+ int err = PTR_ERR(intel->rx_skb);
+ bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
Signed-off-by: Uri Arev <[email protected]>
---
drivers/bluetooth/hci_intel.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index 78afb9a348e7..44731de1a2d6 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -537,7 +537,7 @@ static int intel_setup(struct hci_uart *hu)
int speed_change = 0;
int err;
- bt_dev_dbg(hdev, "start intel_setup");
+ bt_dev_dbg(hdev, "start %s", __func__);
hu->hdev->set_diag = btintel_set_diag;
hu->hdev->set_bdaddr = btintel_set_bdaddr;
@@ -591,12 +591,12 @@ static int intel_setup(struct hci_uart *hu)
return -EINVAL;
}
- /* Check for supported iBT hardware variants of this firmware
- * loading method.
- *
- * This check has been put in place to ensure correct forward
- * compatibility options when newer hardware variants come along.
- */
+ /* Check for supported iBT hardware variants of this firmware
+ * loading method.
+ *
+ * This check has been put in place to ensure correct forward
+ * compatibility options when newer hardware variants come along.
+ */
switch (ver.hw_variant) {
case 0x0b: /* LnP */
case 0x0c: /* WsP */
@@ -777,7 +777,7 @@ static int intel_setup(struct hci_uart *hu)
rettime = ktime_get();
delta = ktime_sub(rettime, calltime);
- duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+ duration = (unsigned long long)ktime_to_ns(delta) >> 10;
bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
@@ -822,7 +822,7 @@ static int intel_setup(struct hci_uart *hu)
rettime = ktime_get();
delta = ktime_sub(rettime, calltime);
- duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+ duration = (unsigned long long)ktime_to_ns(delta) >> 10;
bt_dev_info(hdev, "Device booted in %llu usecs", duration);
@@ -977,6 +977,7 @@ static int intel_recv(struct hci_uart *hu, const void *data, int count)
ARRAY_SIZE(intel_recv_pkts));
if (IS_ERR(intel->rx_skb)) {
int err = PTR_ERR(intel->rx_skb);
+
bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
intel->rx_skb = NULL;
return err;
--
2.44.0
Hi Uri,
On Tue, Apr 2, 2024 at 11:56 AM <[email protected]> wrote:
>
> From: Uri Arev <[email protected]>
>
> This fixes the following CHECKs, WARNINGs, and ERRORs reported in
> hci_intel.c
>
> Reported by checkpatch.pl:
> -----------
> hci_intel.c
> -----------
> WARNING: Prefer using '"%s...", __func__' to using 'intel_setup', this function's name, in a string
> + bt_dev_dbg(hdev, "start intel_setup");
>
> ERROR: code indent should use tabs where possible
> + /* Check for supported iBT hardware variants of this firmware$
>
> ERROR: code indent should use tabs where possible
> + * loading method.$
>
> ERROR: code indent should use tabs where possible
> + *$
>
> ERROR: code indent should use tabs where possible
> + * This check has been put in place to ensure correct forward$
>
> ERROR: code indent should use tabs where possible
> + * compatibility options when newer hardware variants come along.$
>
> ERROR: code indent should use tabs where possible
> + */$
>
> CHECK: No space is necessary after a cast
> + duration = (unsigned long long) ktime_to_ns(delta) >> 10;
>
> CHECK: No space is necessary after a cast
> + duration = (unsigned long long) ktime_to_ns(delta) >> 10;
>
> WARNING: Missing a blank line after declarations
> + int err = PTR_ERR(intel->rx_skb);
> + bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
>
> Signed-off-by: Uri Arev <[email protected]>
> ---
> drivers/bluetooth/hci_intel.c | 19 ++++++++++---------
> 1 file changed, 10 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
> index 78afb9a348e7..44731de1a2d6 100644
> --- a/drivers/bluetooth/hci_intel.c
> +++ b/drivers/bluetooth/hci_intel.c
> @@ -537,7 +537,7 @@ static int intel_setup(struct hci_uart *hu)
> int speed_change = 0;
> int err;
>
> - bt_dev_dbg(hdev, "start intel_setup");
> + bt_dev_dbg(hdev, "start %s", __func__);
We probably don't need __func__ either since this is normally calls
pr_debug which already has support for printing function names if the
user wants to, so I just leave as bt_dev_dbg(hdev, "");
>
> hu->hdev->set_diag = btintel_set_diag;
> hu->hdev->set_bdaddr = btintel_set_bdaddr;
> @@ -591,12 +591,12 @@ static int intel_setup(struct hci_uart *hu)
> return -EINVAL;
> }
>
> - /* Check for supported iBT hardware variants of this firmware
> - * loading method.
> - *
> - * This check has been put in place to ensure correct forward
> - * compatibility options when newer hardware variants come along.
> - */
> + /* Check for supported iBT hardware variants of this firmware
> + * loading method.
> + *
> + * This check has been put in place to ensure correct forward
> + * compatibility options when newer hardware variants come along.
> + */
> switch (ver.hw_variant) {
> case 0x0b: /* LnP */
> case 0x0c: /* WsP */
> @@ -777,7 +777,7 @@ static int intel_setup(struct hci_uart *hu)
>
> rettime = ktime_get();
> delta = ktime_sub(rettime, calltime);
> - duration = (unsigned long long) ktime_to_ns(delta) >> 10;
> + duration = (unsigned long long)ktime_to_ns(delta) >> 10;
>
> bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
>
> @@ -822,7 +822,7 @@ static int intel_setup(struct hci_uart *hu)
>
> rettime = ktime_get();
> delta = ktime_sub(rettime, calltime);
> - duration = (unsigned long long) ktime_to_ns(delta) >> 10;
> + duration = (unsigned long long)ktime_to_ns(delta) >> 10;
>
> bt_dev_info(hdev, "Device booted in %llu usecs", duration);
>
> @@ -977,6 +977,7 @@ static int intel_recv(struct hci_uart *hu, const void *data, int count)
> ARRAY_SIZE(intel_recv_pkts));
> if (IS_ERR(intel->rx_skb)) {
> int err = PTR_ERR(intel->rx_skb);
> +
> bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
> intel->rx_skb = NULL;
> return err;
> --
> 2.44.0
>
--
Luiz Augusto von Dentz
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=840707
---Test result---
Test Summary:
CheckPatch FAIL 0.91 seconds
GitLint FAIL 0.50 seconds
SubjectPrefix PASS 0.13 seconds
BuildKernel PASS 30.80 seconds
CheckAllWarning PASS 32.96 seconds
CheckSparse PASS 38.67 seconds
CheckSmatch FAIL 34.98 seconds
BuildKernel32 PASS 28.99 seconds
TestRunnerSetup PASS 520.42 seconds
TestRunner_l2cap-tester PASS 17.89 seconds
TestRunner_iso-tester PASS 29.76 seconds
TestRunner_bnep-tester PASS 4.70 seconds
TestRunner_mgmt-tester PASS 118.19 seconds
TestRunner_rfcomm-tester PASS 7.27 seconds
TestRunner_sco-tester PASS 14.94 seconds
TestRunner_ioctl-tester PASS 7.55 seconds
TestRunner_mesh-tester PASS 5.82 seconds
TestRunner_smp-tester PASS 6.73 seconds
TestRunner_userchan-tester PASS 4.92 seconds
IncrementalBuild PASS 27.80 seconds
Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl
WARNING: Unnecessary ftrace-like logging - prefer using ftrace
#120: FILE: drivers/bluetooth/hci_intel.c:540:
+ bt_dev_dbg(hdev, "start %s", __func__);
total: 0 errors, 1 warnings, 49 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/src/13614367.patch has style problems, please review.
NOTE: Ignored message types: UNKNOWN_COMMIT_ID
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: GitLint - FAIL
Desc: Run gitlint
Output:
Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl
WARNING: I3 - ignore-body-lines: gitlint will be switching from using Python regex 'match' (match beginning) to 'search' (match anywhere) semantics. Please review your ignore-body-lines.regex option accordingly. To remove this warning, set general.regex-style-search=True. More details: https://jorisroovers.github.io/gitlint/configuration/#regex-style-search
12: B1 Line exceeds max length (99>80): "WARNING: Prefer using '"%s...", __func__' to using 'intel_setup', this function's name, in a string"
13: B3 Line contains hard tab characters (\t): "+ bt_dev_dbg(hdev, "start intel_setup");"
34: B3 Line contains hard tab characters (\t): "+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;"
37: B3 Line contains hard tab characters (\t): "+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;"
40: B3 Line contains hard tab characters (\t): "+ int err = PTR_ERR(intel->rx_skb);"
41: B3 Line contains hard tab characters (\t): "+ bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);"
##############################
Test: CheckSmatch - FAIL
Desc: Run smatch tool with source
Output:
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/hci_core.o] Error 139
make[4]: *** Deleting file 'net/bluetooth/hci_core.o'
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bcm203x.o] Error 139
make[4]: *** Deleting file 'drivers/bluetooth/bcm203x.o'
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:485: drivers/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: drivers] Error 2
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
---
Regards,
Linux Bluetooth